79a44a9de3
stepper.cpp macros rework
delete some tabs
9 years ago
2558c10c6c
Use the slower feedrate for XY axes
9 years ago
31932912dd
Use AxisEnum instead of int for _lcd_move
9 years ago
c3560e0288
Include axis parameter to ultralcd's line_to_current
9 years ago
64268f3312
Fixup axis_is_at_home a little
9 years ago
996d0a9185
Squish the code down a little
9 years ago
8534bc376c
Fix homing of YZ with DUAL_X_CARRIAGE
9 years ago
f2c94b3298
tone will end automaticly
9 years ago
c5e0e29d23
Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h
and add some documentation - how to integrate a new font.
9 years ago
b59e92ab99
Fix for #1946
Syntax error.
9 years ago
3a27a78f9e
Commented REPRAP_DISCOUNT_SMART_CONTROLLER again
and removed some tabs.
9 years ago
064f2b37d0
More Beeper clean up.
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().
Enforced max. duration for M300 to 5 seconds.
Corrected description in 'Configuration.h'
LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
9 years ago
671aaf2dc9
Minor fix for M300
Corrected wrong order of parameters.
9 years ago
d931220a65
Tweak comments
9 years ago
47847765e2
Add M410 QuickStop command
9 years ago
b99e63a7bf
Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
Introduced in commit 697ee2dc
9 years ago
581685a231
Added new PID autotune info, to make easy copy & paste results to marlin
9 years ago
483384aaa4
Fixed faulty comment merge
9 years ago
cc6b7cf3ce
Fixed some comment spellings.
9 years ago
e4595fa24a
Fixed jump in speed when using high accelerations on axes with lots of steps.
I.e., when acceleration * steps per mm > 2,000,000.
This was done by changing MultiU24X24toH16 to take a 32b bit operand.
Removed the claim that stepper.cpp uses the Leib algorithm.
9 years ago
53be0f3399
Babystep delay 2us
9 years ago
cde5eee2a5
Removed unnecessary comments
9 years ago
e1b69db6d1
Fixed M48 mismatch between n and P parameter on documentation
9 years ago
cb9ac490d4
Some minor translations to spanish
9 years ago
3851ac6226
Example Configuration for K8200 back in sync
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
9 years ago
7336e6df07
Always define old_z, not always z2
9 years ago
5dd87d2e74
Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
- Potentially addressing #1911
9 years ago
3f02da646c
Make sure axis_active is cleared for #1908
9 years ago
e0e68c5cbc
Rename servos[] array in Marlin to servo[]
9 years ago
642f6a92bc
fix type of code_has_value
9 years ago
17ad80c1e1
Spacing in XYZ_CONSTS
9 years ago
09d60e0128
Naming and code comments
9 years ago
5a9e45cc4a
Fix Syntax Error Filament Runout Statement
9 years ago
257a907456
Fix typo in next_bed_check_ms
9 years ago
e4b1e8651b
next_ vars faster than previous_
- Change some `previous_` time vars to `next_` so an add only happens
at intervals
- Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all
9 years ago
ccddc280be
Apply three more commits
9 years ago
74e4b42f7e
Default MACHINE_NAME to "3D Printer"
9 years ago
8857b9e921
Use the extruder argument in plan_buffer_line
9 years ago
a37c7ff16d
Manual bed leveling menu fixes.
lcdDrawUpdate = 2 helped a lot!
9 years ago
ac2b23f574
Homing fixes
- Prevent `Z_SAFE_HOMING` from homing Z twice in some cases
- Allow `G28` with XYZ values of 0 to explicitly set the position
- Don’t add `home_offset` when setting XYZ explicitly in `G28`
- Add `code_has_value` function to check for the presence of a numeric
value (could just test for space or nul to allow other types of values)
9 years ago
055b11814a
Additional cleanup of ultralcd.cpp
9 years ago
388dd0cfa5
Fix doubled lcd_quick_feedback
- MENU_ITEM causes lcd_quick_feedback to be called, so only those calls
to `lcd_goto_menu` outside of the `MENU_ITEM` macro need to set the
`feedback` flag when calling `lcd_goto_menu`.
9 years ago
c6bb98abad
machine name for hephestos too
9 years ago
ccbe2c4ea3
Apply CUSTOM_MACHINE_NAME to configurations
- Replace “Mendel” with “RepRap”
9 years ago
5fe382949b
Some G-Codes comment cleanup
9 years ago
8b16ebe705
Break out prevent_dangerous_extrude feature
- It’s inline here, but could be a macro and duplicated for
`planner.cpp`
9 years ago
5914d9d7de
Shuffling declarations..
9 years ago
b328c6e6b6
Shuffling declarations.
9 years ago
fb4cefc91d
Define lcd_move_[xyz] ahead of lcd_move_menu_axis
9 years ago
9189cc66ab
Fix moves for DELTA for MANUAL_BED_LEVELING
- Use `line_to_current` in place of `plan_buffer_line`
9 years ago
Wurstnase
Scott Lahteine
AnHardt
Ivan Galvez Junquera
paclema
Chris Palmer
elgambitero
CONSULitAS
Mehmet Sutas
Edward Patel