Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
AnHardt	c6d2ebe452	Extend the idea of dummy temperature sensors. Added a second sensor and made them configurable.	10 years ago
alexborro	a57869ba49	Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes.	10 years ago
MagoKimbra	986e723eeb	Add 4th extruder	10 years ago
MagoKimbra	0ebf896070	Add 4th extruder	10 years ago
Scott Lahteine	5714f64927	get latest Marlin_v1 changes	10 years ago
Fourmi	af3e4d7510	Update line 627 ,wrong number on thermistortables Wrong number on line 627 > i change number "12" by the correct number "13" Soory	10 years ago
Fourmi	a664763e6f	Update thermistortables.h Add another thermistor table (13),it's a cartridge thermistor up to +300°C,use with Hotend "Simple ONE" & "All In ONE" Thx	10 years ago
Fourmi	c35736a140	Update thermistortables.h Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"	10 years ago
cocktailyogi	512f2a3136	restore Branch from Backup sorry for that	11 years ago
Greg Tan	6e6e4e2143	Added thermistor table for the 500C thermistor shipped with the Pico hot end.	11 years ago
Cameron Lai	da6b536182	Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed	11 years ago
Nutz95	ed6f4a71c5	fix wrong temptable index	11 years ago
Nutz95	3161740df9	This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin	11 years ago
David Forrest	b0093a1513	thermistortables.h: Add comments that table 60 uses beta=3950.	11 years ago
Josef Pavlik	831fc2a952	Pt100 and Pt1000 temperature sensors handling	11 years ago
daid	df194f75e1	Added PT100 support for Ultiboard2	11 years ago
Nicolas Rossi	4623e78ce0	Added Honeywell thermistor 135-104LAF-J01	11 years ago
Ryan Turner	7c47e7162d	Adding Maker's Tool Works heated bed thermistor	12 years ago
whosawhatsis	6a61a3c0b4	missing comma in last commit	12 years ago
whosawhatsis	f0aee4101a	regenerated thermistor table 7 Generated with createTemperatureLookup.py. The old table crapped out at 270C, which was a problem for polycarbonate.	12 years ago
daid303	2f60e324dc	Fixed #394	12 years ago
Denis B	49b2ddc8c1	Cleaned up non-standard characters	12 years ago
Daniele Sdei	3cf59f6f9a	add RepRapPro Huxley thermistor tables	12 years ago
daid303	7577717b59	Fixed #336	12 years ago
daid303	52158dffcc	Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.	12 years ago
MaikStohn	2b7b1e52b1	allow marlin internal 0°C represenation	12 years ago
Erik vd Zalm	0e89022cc3	Correct temptable_55 name.	12 years ago
Bernhard Kubicek	b7fc14bc65	repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright.	13 years ago
linagee	2e8c5049c5	Update Marlin/thermistortables.h	13 years ago
linagee	2d0d8e5272	Small correction.	13 years ago
linagee	9e9db65c3f	Update Marlin/thermistortables.h	13 years ago
linagee	bd966ef389	Update Marlin/thermistortables.h	13 years ago
linagee	775da3f103	Added top ratings and extended to ADC=1 for table 3 and 5.	13 years ago
linagee	96a4baa0be	Update Marlin/thermistortables.h	13 years ago
linagee	2aa9f7b131	Update Marlin/thermistortables.h	13 years ago
linagee	dd9144994e	Tested May 19 - It works! Verified with separate thermocouple TM-902C also.	13 years ago
linagee	4c37d0d9f1	Extended range above 250C. (Operating range states up to 300C)	13 years ago
linagee	241f5a4c0e	Update Marlin/thermistortables.h	13 years ago
MaikStohn	b657a18449	Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit `3682d9bd5b`.	13 years ago
MaikStohn	3682d9bd5b	magic PROGMEM defines to avoid hundreds of wrong GCC warnings	13 years ago
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	13 years ago
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 years ago
Bernhard Kubicek	a9c7da06e3	and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h	13 years ago
Erik van der Zalm	65934eee9c	A lot of changes in the planner code	13 years ago
Erik van der Zalm	d15f01e1b4	Temperature changes	13 years ago
Bernhard Kubicek	40e8081623	changed end of line to windows, which seems to be the majority of developers main platform.	13 years ago
Bernhard Kubicek	00674af3a8	merge from the branch bkubicek/Marlin/zalmmerge	13 years ago
Erik van der Zalm	bf879ceaa9	Added thermistor tables	13 years ago
Erik van der Zalm	094afe7c10	Merged Marlin, Marlin non gen6 and Ultimaker changes	13 years ago
Erik van der Zalm	750f6c33e3	first commit	13 years ago

47 Commits (703f3b38c4e60a1cdaecd7866f1c34e6e730afdd)