AnHardt
75cf302da3
example configurations changed to meet Configuration.h
10 years ago
Dino Del Favero
5cfe13f240
Correct some mistakes
10 years ago
Scott Lahteine
2f467e2797
LCD Progress Bar
10 years ago
Scott Lahteine
6880e93b75
Happy configs
10 years ago
Scott Lahteine
3b1f186c0c
Clean up configs
10 years ago
Scott Lahteine
f83d0f2a68
Defines for electronics boards
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
10 years ago
Scott Lahteine
d201fe74c6
Clean up configs
10 years ago
Scott Lahteine
0e23105e1e
Defines for electronics boards
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
10 years ago
cocktailyogi
ad3b770c1a
updated examples
10 years ago
cocktailyogi
f0cab611db
optimised some math-code
10 years ago
cocktailyogi
512f2a3136
restore Branch from Backup
sorry for that
10 years ago
Greg Tan
6e6e4e2143
Added thermistor table for the 500C thermistor shipped with the Pico hot end.
10 years ago
Dim3nsioneer
8a32c5395b
renaming the disable inactive extruder feature
10 years ago
Dim3nsioneer
29e7639933
Add switch unused feeder(s) off
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
10 years ago
David Forrest
09b84faa00
Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0
11 years ago
Alejandro Romero
1c9a70cee9
Support for Gen3 Monolithic electronics
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
10 years ago
daid
8b4c4aa5c3
Add feature to check&retry CRC read errors on SD.
11 years ago
Cameron Lai
da6b536182
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed
11 years ago
Nutz95
3161740df9
This table is made for thermistor 3950 (can be found on ebay for cheap)
it's caracteristics are :
R25℃ ;100KΩ±1%
B Value(R25/50℃):3990K 1%
Dissipation Factor(mW/℃):1.1~1.6 In still Air
Thermal Time Constant(S):10~17 In Still Air
Operating temperature range: (-50~+260°C)
Dimension: 1.8mm Dia X4.1mm
Lead Length :30mm
This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/
and
http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
11 years ago
Gabe Rosenhouse
d3f305332a
Allowable range now includes default value
11 years ago
Gabe Rosenhouse
b0aeac117f
Adjustable Z probe offset, via custom M-code
11 years ago
David Forrest
b0093a1513
thermistortables.h: Add comments that table 60 uses beta=3950.
11 years ago
Gabe Rosenhouse
174b8d99d5
Simplify 3-point probing using new code only
11 years ago
Gabe Rosenhouse
3b718b816c
better documentation
11 years ago
Gabe Rosenhouse
34fd59c370
ABL at any points
11 years ago
Mark Hanford
ab0d3c4fb3
Various typo fixes - only in comments, no code changes.
11 years ago
Josef Pavlik
831fc2a952
Pt100 and Pt1000 temperature sensors handling
11 years ago
daid
71bb3a8133
Add comments for Ultimainboard 2.0 configuration.
11 years ago
Jim Morris
b819fc53ca
Add Azteeg X3 Pro as motherboard 68
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
11 years ago
David Forrest
a5f53f0cf3
Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS
11 years ago
Ronald
8d162e5bd7
Improved support for panelolu2 encoder and buzzer
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default
buzzer sound.
When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS
When selecting the sanguinololu 1284p the following is true:
- its now enables LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
11 years ago
David Forrest
76cf07c3f7
Configuration.h: Use OVERSAMPLENR in dT_PID definition.
11 years ago
-
e5d3044801
Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability
11 years ago
Michal Dyntar
e8786bf110
Added support for Cheaptronic v1 electronic
11 years ago
fsantini
cc2925b705
Implemented a least squares fit of the bed equation for auto bed leveling.
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
11 years ago
Alex Borro
b33375d438
Z Axis Safe Homing when using Z Probe
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)
This feature has two changes:
1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:
Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT
2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
11 years ago
Erik van der Zalm
48a185d004
Fixed compile errors from bad commits.
11 years ago
fmalpartida
7b556d2e96
Added BT support on AT90USB devices
Added AT90USB device BT connectivity support using second UART.
11 years ago
Kaz Walker
a5e8575829
Add UUID support to M115 responses.
11 years ago
fmalpartida
b5a964fcc5
Initial SAV MkI (RepRap CloneWars board) integration.
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
11 years ago
dumle29
f941203172
PS_ON configurable boot state
Allows the user to select wheter or not the PSU should be turned on or
kept in standby when marlin boots
11 years ago
Erik van der Zalm
8a08cca0f2
Added temperature status less.
Hopefully fixed viky button handling without braking other boards
11 years ago
Alex Borro
6f85a8c7aa
Bed auto Leveling change: Raise Z before homing
- Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance
before homing. This is useful to avoid Z-Probe collision when hotend is
near bed.
- Fixed the issue of Z not going bellow Z_PROBE_OFFSET when
"min_software_endstops" is true.
Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after
homing.
11 years ago
Alex Borro
253dfc4bc1
Bed Auto Leveling feature
Check the Readme for instruction how to enable and configure the feature
11 years ago
phq1910
57173739a1
Update Configuration.h
Include CPU Sethi 3D
11 years ago
Erik van der Zalm
0dca49a7c0
Added Azteeg X3 board.
11 years ago
Erik van der Zalm
d8c2c810b4
Added info to the delta configuration files in the configuration.h file
11 years ago
Erik van der Zalm
9bc88f8bab
Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file
11 years ago
Tim Koster
61db046b32
Added #ifdef BLINKM around new code. Also refined BlinkM.h.
11 years ago
Erik van der Zalm
3626b5ad8b
Removed Delta from the default config file.
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
11 years ago