Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
midopple	a65a26d6b4	If CORE_XY is in use X and Y Axis had to be activated at the same time	12 years ago
midopple	db2f157a22	Replace the <= to < in the Command M907, M350 and M351. The for loop for Axis count over the Array. Add a break after M907	12 years ago
Arnoud	fc4ab05157	Solved minor bug in controllerFan() Extruder 2 was checked where extruder 1 should be checked.	12 years ago
Martin Renold	1a397825f9	fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error	12 years ago
Lukasz Stefanowicz	d71f1e9bf6	Add (as an option) slower SD transfer mode	12 years ago
Bracken Dawson	d5ee2a5a62	Make Gen7 1.4 heater pins match silkscreen	12 years ago
MaikStohn	7ac6d7f78e	FIX: Speedup - no explicit display clear needed in u8glib	12 years ago
MaikStohn	13596e8722	Added RepRapDiscount FULL GRAPHIC Smart Controller	12 years ago
MaikStohn	3a6abe1d6e	Removed STB custom font hack from u8glib library and moved to marlin project	12 years ago
MaikStohn	16afbf9bfa	FIX: adopted latest changes from hitachi implementation	12 years ago
daid303	ac52dcc174	Updated the card menu and watch messages to make it more informative.	12 years ago
Stefanowicz	31bb3fb297	Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined	12 years ago
daid303	c80a78bb70	Lower the default max E feedrate a bit. With the stepper fix this is much to high.	12 years ago
Simon Oliver	5d5909fc25	Fix failure to compile with heated bed: remove call to non-existant scaleBedPID().	12 years ago
Simon Oliver	93f0463b21	Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset). Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read. Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks. Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk. Conflicts: Marlin/language.h	12 years ago
Bart K	4fa2260a59	Fixed cardreader.h to resolve issue #440 (Pull Request #425 missing file)	12 years ago
Erik van der Zalm	038d405254	Corrected #endif in language.h	12 years ago
Dirk Eichel	443aaa30bf	Removed GIT fragments Seems that there was something wrong while merging	12 years ago
ErikZalm	7a5c474d91	Update Configuration.h	12 years ago
Colin Edwards	0d075378d5	Add LARGE_FLASH define and enable it for some of the beefier boards The LARGE_FLASH flag allows superfluous features to be excluded on boards with less memory	12 years ago
Colin Edwards	9a1c90471f	Ignore unused beeper pins	12 years ago
Colin Edwards	1a0f889803	Add support for M300: Play beep sound	12 years ago
whosawhatsis	fd5b7e0cec	Separate PID_MAX from BANG_MAX This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher than PID_MAX. This is useful for powerful heaters to heat quickly in bang-bang mode, but use a lower duty cycle that is easier to stabilize in PID mode.	12 years ago
blddk	e5a853a3d0	Added automated extruder fan function	12 years ago
blddk	72419f69a9	Added rumba	12 years ago
blddk	91bea43332	Added rumba pinout	12 years ago
blddk	d2b00fe486	Removed html and added rumba Found some unwanted html at the bottom of the file which caused it to not be able to compile. Also added rumba as machine.	12 years ago
Dirk Eichel	6c66cae694	GLCD init screen cosmetics	12 years ago
Dirk Eichel	f3e0e5184d	Add include selector between char. LCD and GLCD	12 years ago
Dirk Eichel	5d3862f9d1	Modified u8glib logo on welcome screen	12 years ago
Dirk Eichel	0b320f75e9	Removed debug code, add some comments	12 years ago
Dirk Eichel	5f1cd70122	Add code to lcd_update() for GLCD This code selects between the routines for the GLCD or the char. display.	12 years ago
Dirk Eichel	a49c09a776	Add variable for animated fan, add float conversion w/o sign A new variable was introduced to allow fan animation on the GLCD. Add additional float to string conversion routine without sign character. This is used for the coordinates visualisation on the GLCD.	12 years ago
Dirk Eichel	26d8863111	Add library selection between GLCD and char. LCD	12 years ago
Dirk Eichel	4a141a694f	Marlin code for GLCD display This contains the menues, status screen etc...	12 years ago
Dirk Eichel	83c790a020	Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2	12 years ago
Dirk Eichel	233df9cca0	Add missing LF at the end of the file	12 years ago
Dirk Eichel	bb0de75a92	Removed umwanted HTML code ath the end of the file Sorry for that. This does not lead to compile errors. I removed the unwanted code to make it clean.	12 years ago
Ryan Turner	7c47e7162d	Adding Maker's Tool Works heated bed thermistor	12 years ago
daid	af78d0cbfa	Merge pull request #1 from illuminarti/Fix_E_Speed Fix step rate bug (especially for retraction)	12 years ago
Dirk Eichel	9a78f321a4	Add pins for Motherboard variant 64 These definition contain also the definition for the graphics LCD.	12 years ago
Dirk Eichel	5de25ccd20	Add Motherboard variant 64 - STB V1.1 Definition for the graphic LCD are already in it, they will not harm the configuration as they are only defined constants	12 years ago
Ketil Froyn	f036be7c4e	Clean up tab/whitespace from last commit	12 years ago
Ketil Froyn	07e11c7cf5	Add command M928 to enable logging to file of received gcode commands	12 years ago
daid	92782f9252	Merge pull request #1 from illuminarti/Fix_E_Speed Fix step rate bug (especially for retraction)	12 years ago
whosawhatsis	6a61a3c0b4	missing comma in last commit	12 years ago
whosawhatsis	f0aee4101a	regenerated thermistor table 7 Generated with createTemperatureLookup.py. The old table crapped out at 270C, which was a problem for polycarbonate.	12 years ago
Dirk Eichel	140e095c6e	Add pins for Motherboard variant 64 These definition contain also the definition for the graphics LCD.	12 years ago
Dirk Eichel	b2c1c64fb1	Add Motherboard variant 64 - STB V1.1 Definition for the graphic LCD are already in it, they will not harm the configuration as they are only defined constants	12 years ago
Dirk Eichel	ceb5ee38af	Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin	12 years ago

1 2 3 4 5 ...

762 Commits (2c0fa34c9e931326647567d526d4fd598c2f2320)