Tree: 2610b8d047

FB4S_WIFI

FBG5_WIFI

MKS_UI

vanilla_fb_2.0.x

2.0.7.2

2.0.7.2_upd

2.0.8.1

2.0.9.1

2.0.9.2

2.0.9.3

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from '2610b8d047'

${ noResults }

Commit Graph

64 Commits (2610b8d047d6116a9dd0853f5281d35383aabb8e)

Author	SHA1	Message	Date
Scott Lahteine	0e23105e1e	Defines for electronics boards Added boards.h which contains defines for all the board numbers, plus some shorthand macros for less typing.	10 years ago
cocktailyogi	ad3b770c1a	updated examples	11 years ago
cocktailyogi	f0cab611db	optimised some math-code	11 years ago
cocktailyogi	512f2a3136	restore Branch from Backup sorry for that	11 years ago
Greg Tan	6e6e4e2143	Added thermistor table for the 500C thermistor shipped with the Pico hot end.	11 years ago
Dim3nsioneer	8a32c5395b	renaming the disable inactive extruder feature	11 years ago
Dim3nsioneer	29e7639933	Add switch unused feeder(s) off Having the non-active feeder motors powered on all the time is not necessary. A feature to deactivate the unused feeder motors has been implemented. The feature is enabled on default but can be switched off in the configuration.	11 years ago
David Forrest	09b84faa00	Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0	11 years ago
Alejandro Romero	1c9a70cee9	Support for Gen3 Monolithic electronics Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW TODO: Add support for tipmanager	11 years ago
daid	8b4c4aa5c3	Add feature to check&retry CRC read errors on SD.	11 years ago
Cameron Lai	da6b536182	Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed	11 years ago
Nutz95	3161740df9	This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin	11 years ago
Gabe Rosenhouse	d3f305332a	Allowable range now includes default value	11 years ago
Gabe Rosenhouse	b0aeac117f	Adjustable Z probe offset, via custom M-code	11 years ago
David Forrest	b0093a1513	thermistortables.h: Add comments that table 60 uses beta=3950.	11 years ago
Gabe Rosenhouse	174b8d99d5	Simplify 3-point probing using new code only	11 years ago
Gabe Rosenhouse	3b718b816c	better documentation	11 years ago
Gabe Rosenhouse	34fd59c370	ABL at any points	11 years ago
Mark Hanford	ab0d3c4fb3	Various typo fixes - only in comments, no code changes.	11 years ago
Josef Pavlik	831fc2a952	Pt100 and Pt1000 temperature sensors handling	11 years ago
daid	71bb3a8133	Add comments for Ultimainboard 2.0 configuration.	11 years ago
Jim Morris	b819fc53ca	Add Azteeg X3 Pro as motherboard 68 Add digipot i2c control for MCP4451 Allow M907 to set i2c digipot currents in amps Fix Makefile to allow Azteeg motherboards Fix Makefile to allow Wire libraries only Add beeper pin for Azteeg X3 Pro	11 years ago
David Forrest	a5f53f0cf3	Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS	11 years ago
Ronald	8d162e5bd7	Improved support for panelolu2 encoder and buzzer I added #define for LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default buzzer sound. When selecting Panelolu2 in configuration.h: - it automatically sets the correct ENCODER_PULSES_PER_STEP and ENCODER_STEPS_PER_MENU_ITEM. - if LCD_USE_I2C_BUZZER is defined it will also set the default LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS When selecting the sanguinololu 1284p the following is true: - its now enables LARGE_FLASH - It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is defined	11 years ago
David Forrest	76cf07c3f7	Configuration.h: Use OVERSAMPLENR in dT_PID definition.	11 years ago
-	e5d3044801	Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability	11 years ago
Michal Dyntar	e8786bf110	Added support for Cheaptronic v1 electronic	11 years ago
fsantini	cc2925b705	Implemented a least squares fit of the bed equation for auto bed leveling. The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here: http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html (see qr_solve.cpp for further copyright information)	11 years ago
Alex Borro	b33375d438	Z Axis Safe Homing when using Z Probe Recommended for those who are using the Z Probe for Z Homing (as Z-Endstop) This feature has two changes: 1) Allow user to choose where the Z Probe will touch the bed when homing all axis together (G28) by setting below defines: Z_SAFE_HOMING_X_POINT Z_SAFE_HOMING_Y_POINT 2) Prevents the user to perform Z Axis Homing when the Z Probe is outsite bed.	11 years ago
Erik van der Zalm	48a185d004	Fixed compile errors from bad commits.	11 years ago
fmalpartida	7b556d2e96	Added BT support on AT90USB devices Added AT90USB device BT connectivity support using second UART.	11 years ago
Kaz Walker	a5e8575829	Add UUID support to M115 responses.	11 years ago
fmalpartida	b5a964fcc5	Initial SAV MkI (RepRap CloneWars board) integration. Included support for BT dongle on AT90USB boards. Added LCD Shift Register LCD control Included support for RepRap Clone Wars project board (SAV MKI).	11 years ago
dumle29	f941203172	PS_ON configurable boot state Allows the user to select wheter or not the PSU should be turned on or kept in standby when marlin boots	11 years ago
Erik van der Zalm	8a08cca0f2	Added temperature status less. Hopefully fixed viky button handling without braking other boards	11 years ago
Alex Borro	6f85a8c7aa	Bed auto Leveling change: Raise Z before homing - Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance before homing. This is useful to avoid Z-Probe collision when hotend is near bed. - Fixed the issue of Z not going bellow Z_PROBE_OFFSET when "min_software_endstops" is true. Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after homing.	11 years ago
Alex Borro	253dfc4bc1	Bed Auto Leveling feature Check the Readme for instruction how to enable and configure the feature	11 years ago
phq1910	57173739a1	Update Configuration.h Include CPU Sethi 3D	11 years ago
Erik van der Zalm	0dca49a7c0	Added Azteeg X3 board.	11 years ago
Erik van der Zalm	d8c2c810b4	Added info to the delta configuration files in the configuration.h file	11 years ago
Erik van der Zalm	9bc88f8bab	Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file	11 years ago
Tim Koster	61db046b32	Added #ifdef BLINKM around new code. Also refined BlinkM.h.	11 years ago
Erik van der Zalm	3626b5ad8b	Removed Delta from the default config file. Changed EEPROM CHITCHAT behavior. M503 is always enabled.	11 years ago
Tim Koster	88dfeefca3	Define BlinkM default disabled	11 years ago
Tim Koster	7016cc9511	Added BlinkM support over i2c	11 years ago
Tim Koster	3b315b3da0	Added BlinkM support over i2c	11 years ago
hg42@gmx.net	2ca983568d	separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)	12 years ago
Nicolas Rossi	9bf1cf1b22	Pre-calculate diagonal rod length squared	12 years ago
Nicolas Rossi	4623e78ce0	Added Honeywell thermistor 135-104LAF-J01	12 years ago
Jim Morris	ab624eac2a	revert COnfiguratiuon to the same as head	12 years ago