25e2ca8896
Add Z_CLEARANCE_MULTI_PROBE
Co-Authored-By: nightgryphon <ngryph@gmail.com>
6 years ago
1ea222e6fc
Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE
Fix #11183
6 years ago
9713538427
HOTENDS for Switching Nozzle with Switching Extruder
7 years ago
0ca9db7051
Correct HOTENDS for SWITCHING_EXTRUDER
7 years ago
cf7d5a642a
Fix manual moves for switching tools ( #10868 )
7 years ago
83d42f33e1
Add HAS_HOTEND_OFFSET_Z conditional
7 years ago
3c76bda2d8
Fix switching extruder
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
7 years ago
a1062eec5b
Better handling of DELAY_NS and DELAY_US ( #10716 )
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
7 years ago
f790b4bc0a
Reorganize some conditionals
7 years ago
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
7 years ago
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
987597532c
For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER
Fix #10098
7 years ago
d603e655d3
Fix SWITCHING_EXTRUDER manual movement
7 years ago
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
7 years ago
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD ( #9740 )
7 years ago
c4ec01d59b
Conditionals for SWITCHING_EXTRUDER
In reference to #5367 . SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
7 years ago
704d33c374
Special override of LCD_WIDTH
7 years ago
16739264d3
Add UltiController v2.1 support
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
7 years ago
f27c89980a
[2.0.x] Simplify bltouch configuration ( #9488 )
7 years ago
f7efac57b7
Multi-host support
7 years ago
1c41de16d4
Trailing whitespace clean
7 years ago
ea1a8d1223
add original RADDS LCD + Controller
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
7 years ago
957bbab57f
Update inc files for parity with 1.1.x
7 years ago
b055d8c39c
[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller ( #8814 )
* Adding support for using the MKS_12864OLED with the SSD1306 controller
* Update comment for correct controller type
7 years ago
15d05748df
Adding support for the Tronxy and Zonestar LCD
7 years ago
82f45c3e6a
Patch G33 misuse of PROBE_MANUALLY
7 years ago
ca7d36d9ed
RAMPS pins for ANET_KEYPAD_LCD
7 years ago
93ba72ea83
Add SERIAL_PORT -1, set on SBASE, STM32F103RET6
7 years ago
9cc1d8e312
[2.0.x] Support for SilverGate Board
7 years ago
51fafccc16
[2.0.x] Enable hardware serial ports on LPC1768 ( #8004 )
* Enable hardware serial ports on LPC1768
* Fix compilation errors with other HALs
* FIx order of includes in LPC1768 HAL main.cpp
* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
7 years ago
4e2baeb3e1
Update indentation, file-wrapping for Marlin 2.0.x
7 years ago
9e5cbf0198
BQ should set this in its config, and does
7 years ago
eeb4611606
Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS
7 years ago
a11e6a1022
Different NEOPIXEL types
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
7 years ago
e9bcb9d048
Add 4 new LCD displays
7 years ago
f99d1dedae
Fixing #7833
Derived from #7873
7 years ago
ef90b49fff
Remove extra NEWPANEL settings in Conditionals_LCD.h
7 years ago
7a29f802d0
Fix ENCODER_PULSES_PER_STEP for G3D_PANEL
7 years ago
3d8a0ab4b2
Module updates
7 years ago
5be07b5db2
Move 'inc' files
7 years ago
7342d5c07a
ST7565
7 years ago
6127154af3
Fix identation by tab
There was a tab instead of spaces
7 years ago
405a2132f3
#7529 compile fix
I made an error in previous fix
7 years ago
869d7f3703
#7504 missing part
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
7 years ago
e9c72978c7
Implement SERVO_DELAY as array
This modify give SERVO_DELAY x servo basis
7 years ago
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
7 years ago
aaacef9441
Corrections ( #7231 )
20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
7 years ago
c6d430670a
Clear SHOW_BOOTSCREEN with no LCD
7 years ago
232a10410d
LCD_FOR_MELZI
7 years ago
Scott Lahteine
Scott Lahteine
GMagician
Yunhui Fu
GMagician
Thomas Moore
Even
Dan Delaney
android444
Thomas Moore
Jeffrey Li
Slawomir Ciunczyk
Bob-the-Kuhn
C. Scott Ananian
Tannoo