c6d430670a
Clear SHOW_BOOTSCREEN with no LCD
7 years ago
11c589c3ec
Fix compile issue with G38
Fixes #7250
7 years ago
678914be25
Patch M23 to work around Simplify3D bug
Addressing #7227
7 years ago
3efe4aeef8
Add PROBE_MANUALLY support to G33
7 years ago
8c34233452
UTF-8 mapper for Czech
7 years ago
20f6676d63
DISABLE_[XYZ] compatibility check
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
7 years ago
c28749a567
Add kill action
Sends pre-defined string as action command when printer is kill.
7 years ago
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
7 years ago
4be8d7720e
Fix spelling of "Chinese"
7 years ago
567941e341
Fix for issues #6997 and #7152
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
7 years ago
6a3967ee33
Corrections for probe_pt parameters
7 years ago
534bffa7a9
Correct comment on ABL G29
7 years ago
e1e1a0c344
Provide a default CUSTOM_BOOTSCREEN_TIMEOUT
7 years ago
69297b2d7b
Make all EEPROM optimization options available
7 years ago
d609489b22
Drop setup_homepin
7 years ago
167169e1bf
Sanity check for a real probe with M48
7 years ago
ae5923a3d0
Make lcd_bootscreen common to both
7 years ago
859248433f
Patch for gcode debug
7 years ago
09c90c2f6c
Printrboard RevF Cleanup
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
7 years ago
232a10410d
LCD_FOR_MELZI
7 years ago
76c92a1fab
Clean up some trailing spaces
7 years ago
cf96109056
Implement the EEPROM_CHITCHAT option
7 years ago
dcec7178d1
Expose DISABLE_M503 option as a test option
7 years ago
1ff7d10c80
Add configuration for Infitary M508 (i3 clone)
Based on Infitary's own firmware settings.
8 years ago
4cb45c10dd
Patch ubl lcd mesh map indentation
7 years ago
abd6ba62b4
Some cleanups for ubl lcd mesh map
7 years ago
f17bae1f70
Changes for ubl_lcd_map_control patch
7 years ago
8e0f3b7eba
UBL radar map corrections
8 years ago
fcceed5be6
intermittent Teensy & G26 compile problem
===============================================
also an issue with ubl_motion.cpp
7 years ago
30b327d24c
Finish the solution for #7166
7 years ago
6c97c5595c
Add a sanity check for DELTA_AUTO_CALIBRATION
7 years ago
e6e3132f79
make LETTTER_OFF return values that match param indices range
7 years ago
bfbf5f8200
correct value_bool() when FASTER_GCODE_PARSER is enabled
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
8 years ago
406ef69702
Move Anet A8 config to subfolder
8 years ago
379926961c
Add Anet A6 config, edit Anet A8 config
8 years ago
5b03f23fa2
Bring configurations up to date, fix some comments
8 years ago
e3cedfa0ec
Fix a compiler warning
8 years ago
bb0508b6cf
Fix comment in M115 code
8 years ago
85777a56c6
Add A (action) and E (echo) parameters to M118
8 years ago
b492e0878d
Changes to reduce and simplify
8 years ago
98d362c2da
Adding M118 command to send text to serial
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example. Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
8 years ago
80abc872f3
Updated to better support the coming "radar"
8 years ago
e90cbf5c16
UBL Map Cleanup
8 years ago
fc140c4962
Followup for I2C_POSITION_ENCODERS
8 years ago
bd776df8c1
Optimize seen_axis by moving 'X' to index 24
8 years ago
05449cf6ee
Add shorthand value accessors to gcode.h
8 years ago
12f092c812
Cleanups to gcode.h, use seenval()
8 years ago
941943c167
Apply const, spacing, etc.
8 years ago
5b11b33854
Add support for Průša MK2 Multiplexer
8 years ago
a4a587a897
Fix spelling of Průša
8 years ago
Scott Lahteine
LVD-AC
Petr Zahradník
Dave Johnson
Ben Lye
Scott Lahteine
Tom
Tannoo
Bob-the-Kuhn