diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 2daeef4d80..d507832292 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -238,6 +238,11 @@ const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
 const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
 //#define DISABLE_MAX_ENDSTOPS
 
+// Disable max endstops for compatibility with endstop checking routine
+#if defined(COREXY) && !defined(DISABLE_MAX_ENDSTOPS)
+  #define DISABLE_MAX_ENDSTOPS
+#endif
+
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 #define X_ENABLE_ON 0
 #define Y_ENABLE_ON 0
diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp
index 24a20b1cd3..8eff191751 100644
--- a/Marlin/planner.cpp
+++ b/Marlin/planner.cpp
@@ -564,8 +564,16 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
   block->busy = false;
 
   // Number of steps for each axis
-  block->steps_x = labs(target[X_AXIS]-position[X_AXIS]);
-  block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]);
+#ifndef COREXY
+// default non-h-bot planning
+block->steps_x = labs(target[X_AXIS]-position[X_AXIS]);
+block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]);
+#else
+// corexy planning
+// these equations follow the form of the dA and dB equations on http://www.corexy.com/theory.html
+block->steps_x = labs((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]));
+block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]));
+#endif
   block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]);
   block->steps_e = labs(target[E_AXIS]-position[E_AXIS]);
   block->steps_e *= extrudemultiply;
@@ -586,6 +594,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
 
   // Compute direction bits for this block 
   block->direction_bits = 0;
+#ifndef COREXY
   if (target[X_AXIS] < position[X_AXIS])
   {
     block->direction_bits |= (1<<X_AXIS); 
@@ -594,6 +603,16 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
   {
     block->direction_bits |= (1<<Y_AXIS); 
   }
+#else
+  if ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]) < 0)
+  {
+    block->direction_bits |= (1<<X_AXIS); 
+  }
+  if ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]) < 0)
+  {
+    block->direction_bits |= (1<<Y_AXIS); 
+  }
+#endif
   if (target[Z_AXIS] < position[Z_AXIS])
   {
     block->direction_bits |= (1<<Z_AXIS); 
@@ -638,8 +657,13 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
   } 
 
   float delta_mm[4];
-  delta_mm[X_AXIS] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS];
-  delta_mm[Y_AXIS] = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS];
+  #ifndef COREXY
+    delta_mm[X_AXIS] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS];
+    delta_mm[Y_AXIS] = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS];
+  #else
+    delta_mm[X_AXIS] = ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]))/axis_steps_per_unit[X_AXIS];
+    delta_mm[Y_AXIS] = ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]))/axis_steps_per_unit[Y_AXIS];
+  #endif
   delta_mm[Z_AXIS] = (target[Z_AXIS]-position[Z_AXIS])/axis_steps_per_unit[Z_AXIS];
   delta_mm[E_AXIS] = ((target[E_AXIS]-position[E_AXIS])/axis_steps_per_unit[E_AXIS])*extrudemultiply/100.0;
   if ( block->steps_x <=dropsegments && block->steps_y <=dropsegments && block->steps_z <=dropsegments )
diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index 6a012b54b6..3d88b38383 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -345,12 +345,31 @@ ISR(TIMER1_COMPA_vect)
     // Set directions TO DO This should be done once during init of trapezoid. Endstops -> interrupt
     out_bits = current_block->direction_bits;
 
+
+    // Set the direction bits (X_AXIS=A_AXIS and Y_AXIS=B_AXIS for COREXY)
+    if((out_bits & (1<<X_AXIS))!=0){
+      WRITE(X_DIR_PIN, INVERT_X_DIR);
+      count_direction[X_AXIS]=-1;
+    }
+    else{
+      WRITE(X_DIR_PIN, !INVERT_X_DIR);
+      count_direction[X_AXIS]=1;
+    }
+    if((out_bits & (1<<Y_AXIS))!=0){
+      WRITE(Y_DIR_PIN, INVERT_Y_DIR);
+      count_direction[Y_AXIS]=-1;
+    }
+    else{
+      WRITE(Y_DIR_PIN, !INVERT_Y_DIR);
+      count_direction[Y_AXIS]=1;
+    }
+    
     // Set direction en check limit switches
+    #ifndef COREXY
     if ((out_bits & (1<<X_AXIS)) != 0) {   // stepping along -X axis
-      #if !defined COREXY  //NOT COREXY
-        WRITE(X_DIR_PIN, INVERT_X_DIR);
-      #endif
-      count_direction[X_AXIS]=-1;
+    #else
+    if ((((out_bits & (1<<X_AXIS)) != 0)&&(out_bits & (1<<Y_AXIS)) != 0)) {   //-X occurs for -A and -B
+    #endif
       CHECK_ENDSTOPS
       {
         #if defined(X_MIN_PIN) && X_MIN_PIN > -1
@@ -365,11 +384,6 @@ ISR(TIMER1_COMPA_vect)
       }
     }
     else { // +direction
-      #if !defined COREXY  //NOT COREXY
-        WRITE(X_DIR_PIN,!INVERT_X_DIR);
-      #endif
-      
-      count_direction[X_AXIS]=1;
       CHECK_ENDSTOPS 
       {
         #if defined(X_MAX_PIN) && X_MAX_PIN > -1
@@ -384,11 +398,11 @@ ISR(TIMER1_COMPA_vect)
       }
     }
 
+    #ifndef COREXY
     if ((out_bits & (1<<Y_AXIS)) != 0) {   // -direction
-      #if !defined COREXY  //NOT COREXY
-        WRITE(Y_DIR_PIN,INVERT_Y_DIR);
-      #endif
-      count_direction[Y_AXIS]=-1;
+    #else
+    if ((((out_bits & (1<<X_AXIS)) != 0)&&(out_bits & (1<<Y_AXIS)) == 0)) {   // -Y occurs for -A and +B
+    #endif
       CHECK_ENDSTOPS
       {
         #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
@@ -403,10 +417,6 @@ ISR(TIMER1_COMPA_vect)
       }
     }
     else { // +direction
-      #if !defined COREXY  //NOT COREXY
-        WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
-      #endif
-      count_direction[Y_AXIS]=1;
       CHECK_ENDSTOPS
       {
         #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
@@ -420,28 +430,7 @@ ISR(TIMER1_COMPA_vect)
         #endif
       }
     }
-    
-    
-    #ifdef COREXY  //coreXY kinematics defined
-      if((current_block->steps_x >= current_block->steps_y)&&((out_bits & (1<<X_AXIS)) == 0)){  //+X is major axis
-        WRITE(X_DIR_PIN, !INVERT_X_DIR);
-        WRITE(Y_DIR_PIN, !INVERT_Y_DIR);
-      }
-      if((current_block->steps_x >= current_block->steps_y)&&((out_bits & (1<<X_AXIS)) != 0)){  //-X is major axis
-        WRITE(X_DIR_PIN, INVERT_X_DIR);
-        WRITE(Y_DIR_PIN, INVERT_Y_DIR);
-      }      
-      if((current_block->steps_y > current_block->steps_x)&&((out_bits & (1<<Y_AXIS)) == 0)){  //+Y is major axis
-        WRITE(X_DIR_PIN, !INVERT_X_DIR);
-        WRITE(Y_DIR_PIN, INVERT_Y_DIR);
-      }        
-      if((current_block->steps_y > current_block->steps_x)&&((out_bits & (1<<Y_AXIS)) != 0)){  //-Y is major axis
-        WRITE(X_DIR_PIN, INVERT_X_DIR);
-        WRITE(Y_DIR_PIN, !INVERT_Y_DIR);
-      }  
-    #endif //coreXY
-    
-    
+
     if ((out_bits & (1<<Z_AXIS)) != 0) {   // -direction
       WRITE(Z_DIR_PIN,INVERT_Z_DIR);
       
@@ -516,7 +505,6 @@ ISR(TIMER1_COMPA_vect)
       }    
       #endif //ADVANCE
 
-      #if !defined COREXY      
         counter_x += current_block->steps_x;
         if (counter_x > 0) {
           WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
@@ -532,56 +520,7 @@ ISR(TIMER1_COMPA_vect)
           count_position[Y_AXIS]+=count_direction[Y_AXIS]; 
           WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
         }
-      #endif
   
-      #ifdef COREXY
-        counter_x += current_block->steps_x;        
-        counter_y += current_block->steps_y;
-        
-        if ((counter_x > 0)&&!(counter_y>0)){  //X step only
-          WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
-          WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
-          counter_x -= current_block->step_event_count; 
-          count_position[X_AXIS]+=count_direction[X_AXIS];         
-          WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);
-          WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
-        }
-        
-        if (!(counter_x > 0)&&(counter_y>0)){  //Y step only
-          WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
-          WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
-          counter_y -= current_block->step_event_count; 
-          count_position[Y_AXIS]+=count_direction[Y_AXIS];
-          WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);
-          WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
-        }        
-        
-        if ((counter_x > 0)&&(counter_y>0)){  //step in both axes
-          if (((out_bits & (1<<X_AXIS)) == 0)^((out_bits & (1<<Y_AXIS)) == 0)){  //X and Y in different directions
-            WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
-            counter_x -= current_block->step_event_count;             
-            WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
-            step_wait();
-            count_position[X_AXIS]+=count_direction[X_AXIS];
-            count_position[Y_AXIS]+=count_direction[Y_AXIS];
-            WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
-            counter_y -= current_block->step_event_count;
-            WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
-          }
-          else{  //X and Y in same direction
-            WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
-            counter_x -= current_block->step_event_count;             
-            WRITE(X_STEP_PIN, INVERT_X_STEP_PIN) ;
-            step_wait();
-            count_position[X_AXIS]+=count_direction[X_AXIS];
-            count_position[Y_AXIS]+=count_direction[Y_AXIS];
-            WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); 
-            counter_y -= current_block->step_event_count;    
-            WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);        
-          }
-        }
-      #endif //corexy
-      
       counter_z += current_block->steps_z;
       if (counter_z > 0) {
         WRITE(Z_STEP_PIN, !INVERT_Z_STEP_PIN);