From fe4549cd834e1b6b4901b74e163c2f8c12bf09fb Mon Sep 17 00:00:00 2001 From: Chris Roadfeldt Date: Sun, 29 Mar 2015 03:04:59 -0500 Subject: [PATCH] Config file Z_PROBE_AND_ENDSTOP description clean up. --- Marlin/Configuration.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index e2b0bfc37f..6d76a8ee41 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -491,14 +491,13 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #endif -// Seaparte concurrent Z Probe and Z min endstop support +// Support for concurrent and seperate Z Probe and Z min endstop use. // Added by Chris Roadfeldt 3-28-2015 -// If you have a Z Probe in addition to a Z min endstop, uncomment the #define Z_PROBE_AND_ENDSTOP line below and configure Z Probe settings. -// Only use this if you have both a Z PROBE and Z Min ENDSTOP. -// Note: It's expected that your Z Probe triggers in the direction towards your bed. +// If you would like to use both a Z Probe and a Z min endstop at the same time, uncomment #define Z_PROBE_AND_ENDSTOP below +// You will want to disable Z_SAFE_HOMING above as you will still use the Z min endstop for homing. // In order to use this, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board for the signal. -// The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. The Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. +// The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. // D32 is currently selected in the RAMPS 1.3/1.4 pin file. Update the pins.h file for your control board to make use of this. Not doing so nullifies Z_PROBE_AND_ENDSTOP // WARNING: Setting the wrong pin may have unexpected and disastrous outcomes. Use with caution and do your homework. // #define Z_PROBE_AND_ENDSTOP