Add fan percent accessors

Marlin/src/lcd/HD44780/marlinui_HD44780.cpp

@@ -944,7 +944,7 @@ void MarlinUI::draw_status_screen() {
               #if ENABLED(ADAPTIVE_FAN_SLOWING)
                 else { c = '*'; spd = thermalManager.scaledFanSpeed(0, spd); }
               #endif
-              per = thermalManager.fanPercent(spd);
+              per = thermalManager.pwmToPercent(spd);
             }
             else
           #endif

Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp

@@ -750,7 +750,7 @@ void MarlinUI::draw_status_screen() {
     #if HOTENDS > 2
       _draw_heater_status(H_E2, "HE3", blink); // Hotend 3 Temperature
     #endif
-  #endif // HOTENDS <= 1
+  #endif
 
   #if HAS_HEATED_BED
     #if HAS_LEVELING
@@ -758,16 +758,15 @@ void MarlinUI::draw_status_screen() {
     #else
       _draw_heater_status(H_BED, "BED", blink);
     #endif
-  #endif // HAS_HEATED_BED
+  #endif
 
   #if HAS_FAN
     uint16_t spd = thermalManager.fan_speed[0];
-
     #if ENABLED(ADAPTIVE_FAN_SLOWING)
       if (!blink) spd = thermalManager.scaledFanSpeed(0, spd);
     #endif
+    uint16_t per = thermalManager.pwmToPercent(spd);
 
-    uint16_t per = thermalManager.fanPercent(spd);
     #if HOTENDS < 2
       #define FANX 11
     #else

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -696,7 +696,7 @@ void MarlinUI::draw_status_screen() {
               c = '*';
             }
           #endif
-          lcd_put_u8str(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y, i16tostr3rj(thermalManager.fanPercent(spd)));
+          lcd_put_u8str(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y, i16tostr3rj(thermalManager.pwmToPercent(spd)));
           lcd_put_wchar(c);
         }
       }

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -733,14 +733,12 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
     TERN_(HAS_MULTI_HOTEND, draw_extruder_2_temp(extruder_2_temp, extruder_2_target, forceUpdate));
     TERN_(HAS_HEATED_BED, draw_bed_temp(bed_temp, bed_target, forceUpdate));
 
-    uint16_t spd = thermalManager.fan_speed[0];
-
+    uint8_t spd = thermalManager.fan_speed[0];
     #if ENABLED(ADAPTIVE_FAN_SLOWING)
       if (!blink && thermalManager.fan_speed_scaler[0] < 128)
         spd = thermalManager.scaledFanSpeed(0, spd);
     #endif
-
-    draw_fan_speed(thermalManager.fanPercent(spd));
+    draw_fan_speed(thermalManager.pwmToPercent(spd));
 
     // Draw elapsed/remaining time
     const bool show_remaining = ENABLED(SHOW_REMAINING_TIME) && (DISABLED(ROTATE_PROGRESS_DISPLAY) || blink);

Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp

@@ -236,7 +236,7 @@ void disp_bed_temp() {
 }
 
 void disp_fan_speed() {
-  sprintf_P(public_buf_l, PSTR("%d%%"), thermalManager.fanPercent(thermalManager.fan_speed[0]));
+  sprintf_P(public_buf_l, PSTR("%d%%"), thermalManager.fanSpeedPercent(0));
   lv_label_set_text(labelFan, public_buf_l);
 }
 

Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp

@@ -241,7 +241,7 @@ void lv_draw_ready_print() {
       lv_obj_align(labelBedTarget, buttonBedstate, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y);
     #endif
 
-    sprintf_P(buf, PSTR("%d%%"), thermalManager.fanPercent(thermalManager.fan_speed[0]));
+    sprintf_P(buf, PSTR("%d%%"), (int)thermalManager.fanSpeedPercent(0));
     lv_label_set_text(labelFan, buf);
     lv_obj_align(labelFan, buttonFanstate, LV_ALIGN_CENTER, 0, LABEL_MOD_Y);
   }

Marlin/src/lcd/extui/ui_api.cpp

@@ -297,7 +297,7 @@ namespace ExtUI {
 
   float getTargetFan_percent(const fan_t fan) {
     #if HAS_FAN
-      return thermalManager.fanPercent(thermalManager.fan_speed[fan - FAN0]);
+      return thermalManager.fanSpeedPercent(fan - FAN0);
     #else
       UNUSED(fan);
       return 0;
@@ -306,7 +306,7 @@ namespace ExtUI {
 
   float getActualFan_percent(const fan_t fan) {
     #if HAS_FAN
-      return thermalManager.fanPercent(thermalManager.scaledFanSpeed(fan - FAN0));
+      return thermalManager.scaledFanSpeedPercent(fan - FAN0);
     #else
       UNUSED(fan);
       return 0;

Marlin/src/module/temperature.cpp

@@ -315,34 +315,34 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
   /**
    * Set the print fan speed for a target extruder
    */
-  void Temperature::set_fan_speed(uint8_t target, uint16_t speed) {
+  void Temperature::set_fan_speed(uint8_t fan, uint16_t speed) {
 
     NOMORE(speed, 255U);
 
     #if ENABLED(SINGLENOZZLE_STANDBY_FAN)
-      if (target != active_extruder) {
-        if (target < EXTRUDERS) singlenozzle_fan_speed[target] = speed;
+      if (fan != active_extruder) {
+        if (fan < EXTRUDERS) singlenozzle_fan_speed[fan] = speed;
         return;
       }
     #endif
 
-    TERN_(SINGLENOZZLE, target = 0); // Always use fan index 0 with SINGLENOZZLE
+    TERN_(SINGLENOZZLE, fan = 0); // Always use fan index 0 with SINGLENOZZLE
 
-    if (target >= FAN_COUNT) return;
+    if (fan >= FAN_COUNT) return;
 
-    fan_speed[target] = speed;
+    fan_speed[fan] = speed;
 
-    TERN_(REPORT_FAN_CHANGE, report_fan_speed(target));
+    TERN_(REPORT_FAN_CHANGE, report_fan_speed(fan));
   }
 
   #if ENABLED(REPORT_FAN_CHANGE)
     /**
      * Report print fan speed for a target extruder
      */
-    void Temperature::report_fan_speed(const uint8_t target) {
-      if (target >= FAN_COUNT) return;
+    void Temperature::report_fan_speed(const uint8_t fan) {
+      if (fan >= FAN_COUNT) return;
       PORT_REDIRECT(SerialMask::All);
-      SERIAL_ECHOLNPAIR("M106 P", target, " S", fan_speed[target]);
+      SERIAL_ECHOLNPAIR("M106 P", fan, " S", fan_speed[fan]);
     }
   #endif
 

Marlin/src/module/temperature.h

@@ -553,10 +553,10 @@ class Temperature {
       static uint8_t fan_speed[FAN_COUNT];
       #define FANS_LOOP(I) LOOP_L_N(I, FAN_COUNT)
 
-      static void set_fan_speed(const uint8_t target, const uint16_t speed);
+      static void set_fan_speed(const uint8_t fan, const uint16_t speed);
 
       #if ENABLED(REPORT_FAN_CHANGE)
-        static void report_fan_speed(const uint8_t target);
+        static void report_fan_speed(const uint8_t fan);
       #endif
 
       #if EITHER(PROBING_FANS_OFF, ADVANCED_PAUSE_FANS_PAUSE)
@@ -564,21 +564,23 @@ class Temperature {
         static uint8_t saved_fan_speed[FAN_COUNT];
       #endif
 
-      static constexpr inline uint8_t fanPercent(const uint8_t speed) { return ui8_to_percent(speed); }
-
       #if ENABLED(ADAPTIVE_FAN_SLOWING)
         static uint8_t fan_speed_scaler[FAN_COUNT];
       #endif
 
-      static inline uint8_t scaledFanSpeed(const uint8_t target, const uint8_t fs) {
-        UNUSED(target); // Potentially unused!
-        return (fs * uint16_t(TERN(ADAPTIVE_FAN_SLOWING, fan_speed_scaler[target], 128))) >> 7;
+      static inline uint8_t scaledFanSpeed(const uint8_t fan, const uint8_t fs) {
+        UNUSED(fan); // Potentially unused!
+        return (fs * uint16_t(TERN(ADAPTIVE_FAN_SLOWING, fan_speed_scaler[fan], 128))) >> 7;
       }
 
-      static inline uint8_t scaledFanSpeed(const uint8_t target) {
-        return scaledFanSpeed(target, fan_speed[target]);
+      static inline uint8_t scaledFanSpeed(const uint8_t fan) {
+        return scaledFanSpeed(fan, fan_speed[fan]);
       }
 
+      static constexpr inline uint8_t pwmToPercent(const uint8_t speed) { return ui8_to_percent(speed); }
+      static inline uint8_t fanSpeedPercent(const uint8_t fan)          { return ui8_to_percent(fan_speed[fan]); }
+      static inline uint8_t scaledFanSpeedPercent(const uint8_t fan)    { return ui8_to_percent(scaledFanSpeed(fan)); }
+
       #if ENABLED(EXTRA_FAN_SPEED)
         typedef struct { uint8_t saved, speed; } extra_fan_t;
         static extra_fan_t extra_fan_speed[FAN_COUNT];