From fcef8d946cbd45e27ba9888f1e18327b68d52b00 Mon Sep 17 00:00:00 2001 From: lujios <83166168+lujios@users.noreply.github.com> Date: Fri, 3 Jun 2022 07:19:25 +0200 Subject: [PATCH] =?UTF-8?q?=E2=9A=A1=EF=B8=8F=20Improve=20Sensorless=20hom?= =?UTF-8?q?ing/probing=20accuracy=20for=20G28,=20G33,=20M48=20(#24220)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Co-Authored-By: Robby Candra Co-Authored-By: ellensp <530024+ellensp@users.noreply.github.com> --- Marlin/src/gcode/calibrate/G28.cpp | 6 + Marlin/src/gcode/calibrate/G33.cpp | 47 ++++++-- .../lcd/extui/dgus/mks/DGUSScreenHandler.cpp | 3 +- Marlin/src/lcd/menu/menu_delta_calibrate.cpp | 8 +- Marlin/src/module/delta.cpp | 10 ++ Marlin/src/module/delta.h | 11 ++ Marlin/src/module/endstops.cpp | 66 +++++++++++ Marlin/src/module/endstops.h | 5 + Marlin/src/module/motion.cpp | 14 ++- Marlin/src/module/planner.cpp | 5 +- Marlin/src/module/probe.cpp | 103 ++++++++---------- Marlin/src/module/probe.h | 11 +- 12 files changed, 212 insertions(+), 77 deletions(-) diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index 681df55f20..b2096ace7e 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -321,6 +321,9 @@ void GcodeSuite::G28() { stepperK.rms_current(K_CURRENT_HOME); if (DEBUGGING(LEVELING)) debug_current(F(STR_K), tmc_save_current_K, K_CURRENT_HOME); #endif + #if SENSORLESS_STALLGUARD_DELAY + safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle + #endif #endif #if ENABLED(IMPROVE_HOMING_RELIABILITY) @@ -542,6 +545,9 @@ void GcodeSuite::G28() { #if HAS_CURRENT_HOME(K) stepperK.rms_current(tmc_save_current_K); #endif + #if SENSORLESS_STALLGUARD_DELAY + safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle + #endif #endif // HAS_HOMING_CURRENT ui.refresh(); diff --git a/Marlin/src/gcode/calibrate/G33.cpp b/Marlin/src/gcode/calibrate/G33.cpp index 506f367947..05da2f9457 100644 --- a/Marlin/src/gcode/calibrate/G33.cpp +++ b/Marlin/src/gcode/calibrate/G33.cpp @@ -71,9 +71,9 @@ float lcd_probe_pt(const xy_pos_t &xy); void ac_home() { endstops.enable(true); - TERN_(HAS_DELTA_SENSORLESS_PROBING, probe.set_homing_current(true)); + TERN_(SENSORLESS_HOMING, endstops.set_homing_current(true)); home_delta(); - TERN_(HAS_DELTA_SENSORLESS_PROBING, probe.set_homing_current(false)); + TERN_(SENSORLESS_HOMING, endstops.set_homing_current(false)); endstops.not_homing(); } @@ -390,6 +390,8 @@ static float auto_tune_a(const float dcr) { * X Don't activate stallguard on X. * Y Don't activate stallguard on Y. * Z Don't activate stallguard on Z. + * + * S Save offset_sensorless_adj */ void GcodeSuite::G33() { @@ -411,7 +413,8 @@ void GcodeSuite::G33() { dcr -= probe_at_offset ? _MAX(total_offset, PROBING_MARGIN) : total_offset; #endif NOMORE(dcr, DELTA_PRINTABLE_RADIUS); - if (parser.seenval('R')) dcr -= _MAX(parser.value_float(),0); + if (parser.seenval('R')) dcr -= _MAX(parser.value_float(), 0.0f); + TERN_(HAS_DELTA_SENSORLESS_PROBING, dcr *= sensorless_radius_factor); const float calibration_precision = parser.floatval('C', 0.0f); if (calibration_precision < 0) { @@ -434,9 +437,8 @@ void GcodeSuite::G33() { const bool stow_after_each = parser.seen_test('E'); #if HAS_DELTA_SENSORLESS_PROBING - probe.test_sensitivity.x = !parser.seen_test('X'); - TERN_(HAS_Y_AXIS, probe.test_sensitivity.y = !parser.seen_test('Y')); - TERN_(HAS_Z_AXIS, probe.test_sensitivity.z = !parser.seen_test('Z')); + probe.test_sensitivity.set(!parser.seen_test('X'), !parser.seen_test('Y'), !parser.seen_test('Z')); + const bool do_save_offset_adj = parser.seen_test('S'); #endif const bool _0p_calibration = probe_points == 0, @@ -475,6 +477,25 @@ void GcodeSuite::G33() { if (!_0p_calibration) ac_home(); + #if HAS_DELTA_SENSORLESS_PROBING + if (verbose_level > 0 && do_save_offset_adj) { + offset_sensorless_adj.reset(); + + auto caltower = [&](Probe::sense_bool_t s){ + float z_at_pt[NPP + 1]; + LOOP_CAL_ALL(rad) z_at_pt[rad] = 0.0f; + probe.test_sensitivity = s; + if (probe_calibration_points(z_at_pt, 1, dcr, false, false, probe_at_offset)) + probe.set_offset_sensorless_adj(z_at_pt[CEN]); + }; + caltower({ true, false, false }); // A + caltower({ false, true, false }); // B + caltower({ false, false, true }); // C + + probe.test_sensitivity = { true, true, true }; // reset to all + } + #endif + do { // start iterations float z_at_pt[NPP + 1] = { 0.0f }; @@ -598,8 +619,17 @@ void GcodeSuite::G33() { // print report - if (verbose_level == 3 || verbose_level == 0) + if (verbose_level == 3 || verbose_level == 0) { print_calibration_results(z_at_pt, _tower_results, _opposite_results); + #if HAS_DELTA_SENSORLESS_PROBING + if (verbose_level == 0 && probe_points == 1) { + if (do_save_offset_adj) + probe.set_offset_sensorless_adj(z_at_pt[CEN]); + else + probe.refresh_largest_sensorless_adj(); + } + #endif + } if (verbose_level != 0) { // !dry run if ((zero_std_dev >= test_precision && iterations > force_iterations) || zero_std_dev <= calibration_precision) { // end iterations @@ -660,6 +690,9 @@ void GcodeSuite::G33() { ac_cleanup(TERN_(HAS_MULTI_HOTEND, old_tool_index)); TERN_(FULL_REPORT_TO_HOST_FEATURE, set_and_report_grblstate(M_IDLE)); + #if HAS_DELTA_SENSORLESS_PROBING + probe.test_sensitivity = { true, true, true }; + #endif } #endif // DELTA_AUTO_CALIBRATION diff --git a/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp index 35c2de0549..739265e496 100644 --- a/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp +++ b/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp @@ -193,7 +193,6 @@ void DGUSScreenHandlerMKS::DGUSLCD_SendTMCStepValue(DGUS_VP_Variable &var) { if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes. switch (swap16(*(uint16_t*)val_ptr)) { case 0: { // Resume - auto cs = getCurrentScreen(); if (runout_mks.runout_status != RUNOUT_WAITING_STATUS && runout_mks.runout_status != UNRUNOUT_STATUS) { if (cs == MKSLCD_SCREEN_PRINT || cs == MKSLCD_SCREEN_PAUSE) @@ -213,7 +212,6 @@ void DGUSScreenHandlerMKS::DGUSLCD_SendTMCStepValue(DGUS_VP_Variable &var) { } break; case 1: // Pause - GotoScreen(MKSLCD_SCREEN_PAUSE); if (!ExtUI::isPrintingFromMediaPaused()) { nozzle_park_mks.print_pause_start_flag = 1; @@ -222,6 +220,7 @@ void DGUSScreenHandlerMKS::DGUSLCD_SendTMCStepValue(DGUS_VP_Variable &var) { //ExtUI::mks_pausePrint(); } break; + case 2: // Abort HandleUserConfirmationPopUp(VP_SD_AbortPrintConfirmed, nullptr, PSTR("Abort printing"), filelist.filename(), PSTR("?"), true, true, false, true); break; diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp index 76d5677a80..b86f101258 100644 --- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp +++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp @@ -41,6 +41,10 @@ #include "../extui/ui_api.h" #endif +#if HAS_PROBE_XY_OFFSET + #include "../../module/probe.h" +#endif + void _man_probe_pt(const xy_pos_t &xy) { if (!ui.wait_for_move) { ui.wait_for_move = true; @@ -88,7 +92,9 @@ void _man_probe_pt(const xy_pos_t &xy) { } void _goto_tower_a(const_float_t a) { - constexpr float dcr = DELTA_PRINTABLE_RADIUS; + float dcr = DELTA_PRINTABLE_RADIUS - PROBING_MARGIN; + TERN_(HAS_PROBE_XY_OFFSET, dcr -= HYPOT(probe.offset_xy.x, probe.offset_xy.y)); + TERN_(HAS_DELTA_SENSORLESS_PROBING, dcr *= sensorless_radius_factor); xy_pos_t tower_vec = { cos(RADIANS(a)), sin(RADIANS(a)) }; _man_probe_pt(tower_vec * dcr); } diff --git a/Marlin/src/module/delta.cpp b/Marlin/src/module/delta.cpp index cd40175da4..35c9cf63c7 100644 --- a/Marlin/src/module/delta.cpp +++ b/Marlin/src/module/delta.cpp @@ -60,6 +60,10 @@ xy_float_t delta_tower[ABC]; abc_float_t delta_diagonal_rod_2_tower; float delta_clip_start_height = Z_MAX_POS; abc_float_t delta_diagonal_rod_trim; +#if HAS_DELTA_SENSORLESS_PROBING + abc_float_t offset_sensorless_adj{0}; + float largest_sensorless_adj = 0; +#endif float delta_safe_distance_from_top(); @@ -233,6 +237,9 @@ void home_delta() { TERN_(I_SENSORLESS, sensorless_t stealth_states_i = start_sensorless_homing_per_axis(I_AXIS)); TERN_(J_SENSORLESS, sensorless_t stealth_states_j = start_sensorless_homing_per_axis(J_AXIS)); TERN_(K_SENSORLESS, sensorless_t stealth_states_k = start_sensorless_homing_per_axis(K_AXIS)); + #if SENSORLESS_STALLGUARD_DELAY + safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle + #endif #endif // Move all carriages together linearly until an endstop is hit. @@ -249,6 +256,9 @@ void home_delta() { TERN_(I_SENSORLESS, end_sensorless_homing_per_axis(I_AXIS, stealth_states_i)); TERN_(J_SENSORLESS, end_sensorless_homing_per_axis(J_AXIS, stealth_states_j)); TERN_(K_SENSORLESS, end_sensorless_homing_per_axis(K_AXIS, stealth_states_k)); + #if SENSORLESS_STALLGUARD_DELAY + safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle + #endif #endif endstops.validate_homing_move(); diff --git a/Marlin/src/module/delta.h b/Marlin/src/module/delta.h index 7cd42805c9..f7067ef9c7 100644 --- a/Marlin/src/module/delta.h +++ b/Marlin/src/module/delta.h @@ -38,6 +38,10 @@ extern xy_float_t delta_tower[ABC]; extern abc_float_t delta_diagonal_rod_2_tower; extern float delta_clip_start_height; extern abc_float_t delta_diagonal_rod_trim; +#if HAS_DELTA_SENSORLESS_PROBING + extern abc_float_t offset_sensorless_adj; + extern float largest_sensorless_adj; +#endif /** * Recalculate factors used for delta kinematics whenever @@ -45,6 +49,13 @@ extern abc_float_t delta_diagonal_rod_trim; */ void recalc_delta_settings(); +/** + * Get a safe radius for calibration + */ +#if HAS_DELTA_SENSORLESS_PROBING + static constexpr float sensorless_radius_factor = 0.7f; +#endif + /** * Delta Inverse Kinematics * diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp index 6abbcfd8fd..3f980b2217 100644 --- a/Marlin/src/module/endstops.cpp +++ b/Marlin/src/module/endstops.cpp @@ -31,6 +31,9 @@ #include "temperature.h" #include "../lcd/marlinui.h" +#define DEBUG_OUT BOTH(USE_SENSORLESS, DEBUG_LEVELING_FEATURE) +#include "../core/debug_out.h" + #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) #include HAL_PATH(../HAL, endstop_interrupts.h) #endif @@ -1355,3 +1358,66 @@ void Endstops::update() { } #endif // PINS_DEBUGGING + +#if USE_SENSORLESS + /** + * Change TMC driver currents to N##_CURRENT_HOME, saving the current configuration of each. + */ + void Endstops::set_homing_current(const bool onoff) { + #define HAS_CURRENT_HOME(N) (defined(N##_CURRENT_HOME) && N##_CURRENT_HOME != N##_CURRENT) + #define HAS_DELTA_X_CURRENT (ENABLED(DELTA) && HAS_CURRENT_HOME(X)) + #define HAS_DELTA_Y_CURRENT (ENABLED(DELTA) && HAS_CURRENT_HOME(Y)) + #if HAS_DELTA_X_CURRENT || HAS_DELTA_Y_CURRENT || HAS_CURRENT_HOME(Z) + #if HAS_DELTA_X_CURRENT + static int16_t saved_current_x; + #endif + #if HAS_DELTA_Y_CURRENT + static int16_t saved_current_y; + #endif + #if HAS_CURRENT_HOME(Z) + static int16_t saved_current_z; + #endif + auto debug_current_on = [](PGM_P const s, const int16_t a, const int16_t b) { + if (DEBUGGING(LEVELING)) { DEBUG_ECHOPGM_P(s); DEBUG_ECHOLNPGM(" current: ", a, " -> ", b); } + }; + if (onoff) { + #if HAS_DELTA_X_CURRENT + saved_current_x = stepperX.getMilliamps(); + stepperX.rms_current(X_CURRENT_HOME); + debug_current_on(PSTR("X"), saved_current_x, X_CURRENT_HOME); + #endif + #if HAS_DELTA_Y_CURRENT + saved_current_y = stepperY.getMilliamps(); + stepperY.rms_current(Y_CURRENT_HOME); + debug_current_on(PSTR("Y"), saved_current_y, Y_CURRENT_HOME); + #endif + #if HAS_CURRENT_HOME(Z) + saved_current_z = stepperZ.getMilliamps(); + stepperZ.rms_current(Z_CURRENT_HOME); + debug_current_on(PSTR("Z"), saved_current_z, Z_CURRENT_HOME); + #endif + } + else { + #if HAS_DELTA_X_CURRENT + stepperX.rms_current(saved_current_x); + debug_current_on(PSTR("X"), X_CURRENT_HOME, saved_current_x); + #endif + #if HAS_DELTA_Y_CURRENT + stepperY.rms_current(saved_current_y); + debug_current_on(PSTR("Y"), Y_CURRENT_HOME, saved_current_y); + #endif + #if HAS_CURRENT_HOME(Z) + stepperZ.rms_current(saved_current_z); + debug_current_on(PSTR("Z"), Z_CURRENT_HOME, saved_current_z); + #endif + } + + TERN_(IMPROVE_HOMING_RELIABILITY, planner.enable_stall_prevention(onoff)); + + #if SENSORLESS_STALLGUARD_DELAY + safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle + #endif + + #endif // XYZ + } +#endif diff --git a/Marlin/src/module/endstops.h b/Marlin/src/module/endstops.h index 82a44cf95b..83d1bc826f 100644 --- a/Marlin/src/module/endstops.h +++ b/Marlin/src/module/endstops.h @@ -241,6 +241,11 @@ class Endstops { static void clear_endstop_state(); static bool tmc_spi_homing_check(); #endif + public: + // Basic functions for Sensorless Homing + #if USE_SENSORLESS + static void set_homing_current(const bool onoff); + #endif }; extern Endstops endstops; diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp index c2e56e22f6..ceea7f7117 100644 --- a/Marlin/src/module/motion.cpp +++ b/Marlin/src/module/motion.cpp @@ -1541,7 +1541,12 @@ void prepare_line_to_destination() { } // Disable stealthChop if used. Enable diag1 pin on driver. - TERN_(SENSORLESS_HOMING, stealth_states = start_sensorless_homing_per_axis(axis)); + #if ENABLED(SENSORLESS_HOMING) + stealth_states = start_sensorless_homing_per_axis(axis); + #if SENSORLESS_STALLGUARD_DELAY + safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle + #endif + #endif } #if EITHER(MORGAN_SCARA, MP_SCARA) @@ -1577,7 +1582,12 @@ void prepare_line_to_destination() { endstops.validate_homing_move(); // Re-enable stealthChop if used. Disable diag1 pin on driver. - TERN_(SENSORLESS_HOMING, end_sensorless_homing_per_axis(axis, stealth_states)); + #if ENABLED(SENSORLESS_HOMING) + end_sensorless_homing_per_axis(axis, stealth_states); + #if SENSORLESS_STALLGUARD_DELAY + safe_delay(SENSORLESS_STALLGUARD_DELAY); // Short delay needed to settle + #endif + #endif } } diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index dcec8e3a62..17eab914de 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -1657,10 +1657,7 @@ void Planner::quick_stop() { // forced to empty, there's no risk the ISR will touch this. delay_before_delivering = BLOCK_DELAY_FOR_1ST_MOVE; - #if HAS_WIRED_LCD - // Clear the accumulated runtime - clear_block_buffer_runtime(); - #endif + TERN_(HAS_WIRED_LCD, clear_block_buffer_runtime()); // Clear the accumulated runtime // Make sure to drop any attempt of queuing moves for 1 second cleaning_buffer_counter = TEMP_TIMER_FREQUENCY; diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 9318559499..1b49e4d4d8 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -103,7 +103,7 @@ xyz_pos_t Probe::offset; // Initialized by settings.load() #endif #if ENABLED(SENSORLESS_PROBING) - Probe::sense_bool_t Probe::test_sensitivity; + Probe::sense_bool_t Probe::test_sensitivity = { true, true, true }; #endif #if ENABLED(Z_PROBE_SLED) @@ -531,12 +531,12 @@ bool Probe::probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s) { #if ENABLED(SENSORLESS_PROBING) sensorless_t stealth_states { false }; #if HAS_DELTA_SENSORLESS_PROBING - if (test_sensitivity.x) stealth_states.x = tmc_enable_stallguard(stepperX); // Delta watches all DIAG pins for a stall + if (test_sensitivity.x) stealth_states.x = tmc_enable_stallguard(stepperX); // Delta watches all DIAG pins for a stall if (test_sensitivity.y) stealth_states.y = tmc_enable_stallguard(stepperY); #endif - if (test_sensitivity.z) stealth_states.z = tmc_enable_stallguard(stepperZ); // All machines will check Z-DIAG for stall + if (test_sensitivity.z) stealth_states.z = tmc_enable_stallguard(stepperZ); // All machines will check Z-DIAG for stall + endstops.set_homing_current(true); // The "homing" current also applies to probing endstops.enable(true); - set_homing_current(true); // The "homing" current also applies to probing #endif TERN_(HAS_QUIET_PROBING, set_probing_paused(true)); @@ -553,6 +553,11 @@ bool Probe::probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s) { #endif ; + // Offset sensorless probing + #if HAS_DELTA_SENSORLESS_PROBING + if (probe_triggered) probe.refresh_largest_sensorless_adj(); + #endif + TERN_(HAS_QUIET_PROBING, set_probing_paused(false)); // Re-enable stealthChop if used. Disable diag1 pin on driver. @@ -563,7 +568,7 @@ bool Probe::probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s) { if (test_sensitivity.y) tmc_disable_stallguard(stepperY, stealth_states.y); #endif if (test_sensitivity.z) tmc_disable_stallguard(stepperZ, stealth_states.z); - set_homing_current(false); + endstops.set_homing_current(false); #endif #if ENABLED(BLTOUCH) @@ -666,8 +671,7 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/) { if (try_to_probe(PSTR("FAST"), z_probe_low_point, z_probe_fast_mm_s, sanity_check, Z_CLEARANCE_BETWEEN_PROBES) ) return NAN; - const float first_probe_z = current_position.z; - + const float first_probe_z = DIFF_TERN(HAS_DELTA_SENSORLESS_PROBING, current_position.z, largest_sensorless_adj); if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("1st Probe Z:", first_probe_z); // Raise to give the probe clearance @@ -709,7 +713,7 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/) { TERN_(MEASURE_BACKLASH_WHEN_PROBING, backlash.measure_with_probe()); - const float z = current_position.z; + const float z = DIFF_TERN(HAS_DELTA_SENSORLESS_PROBING, current_position.z, largest_sensorless_adj); #if EXTRA_PROBING > 0 // Insert Z measurement into probes[]. Keep it sorted ascending. @@ -760,7 +764,7 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/) { #elif TOTAL_PROBING == 2 - const float z2 = current_position.z; + const float z2 = DIFF_TERN(HAS_DELTA_SENSORLESS_PROBING, current_position.z, largest_sensorless_adj); if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("2nd Probe Z:", z2, " Discrepancy:", first_probe_z - z2); @@ -842,7 +846,7 @@ float Probe::probe_at_point(const_float_t rx, const_float_t ry, const ProbePtRai SERIAL_ERROR_MSG(STR_ERR_PROBING_FAILED); #endif } - + DEBUG_ECHOLNPGM("measured_z: ", measured_z); return measured_z; } @@ -895,58 +899,39 @@ float Probe::probe_at_point(const_float_t rx, const_float_t ry, const ProbePtRai } /** - * Change the current in the TMC drivers to N##_CURRENT_HOME. And we save the current configuration of each TMC driver. + * Set the sensorless Z offset */ - void Probe::set_homing_current(const bool onoff) { - #define HAS_CURRENT_HOME(N) (defined(N##_CURRENT_HOME) && N##_CURRENT_HOME != N##_CURRENT) - #if HAS_CURRENT_HOME(X) || HAS_CURRENT_HOME(Y) || HAS_CURRENT_HOME(Z) - #if ENABLED(DELTA) - static int16_t saved_current_X, saved_current_Y; - #endif - #if HAS_CURRENT_HOME(Z) - static int16_t saved_current_Z; + void Probe::set_offset_sensorless_adj(const_float_t sz) { + #if ENABLED(SENSORLESS_PROBING) + DEBUG_SECTION(pso, "Probe::set_offset_sensorless_adj", true); + #if HAS_DELTA_SENSORLESS_PROBING + if (test_sensitivity.x) offset_sensorless_adj.a = sz; + if (test_sensitivity.y) offset_sensorless_adj.b = sz; #endif - #if ((ENABLED(DELTA) && (HAS_CURRENT_HOME(X) || HAS_CURRENT_HOME(Y))) || HAS_CURRENT_HOME(Z)) - auto debug_current_on = [](PGM_P const s, const int16_t a, const int16_t b) { - if (DEBUGGING(LEVELING)) { DEBUG_ECHOPGM_P(s); DEBUG_ECHOLNPGM(" current: ", a, " -> ", b); } - }; + if (test_sensitivity.z) offset_sensorless_adj.c = sz; + #endif + } + + /** + * Refresh largest_sensorless_adj based on triggered endstops + */ + void Probe::refresh_largest_sensorless_adj() { + #if ENABLED(SENSORLESS_PROBING) + DEBUG_SECTION(rso, "Probe::refresh_largest_sensorless_adj", true); + largest_sensorless_adj = -3; // A reference away from any real probe height + #if HAS_DELTA_SENSORLESS_PROBING + if (TEST(endstops.state(), X_MAX)) { + NOLESS(largest_sensorless_adj, offset_sensorless_adj.a); + DEBUG_ECHOLNPGM("Endstop_X: ", largest_sensorless_adj, " TowerX"); + } + if (TEST(endstops.state(), Y_MAX)) { + NOLESS(largest_sensorless_adj, offset_sensorless_adj.b); + DEBUG_ECHOLNPGM("Endstop_Y: ", largest_sensorless_adj, " TowerY"); + } #endif - if (onoff) { - #if ENABLED(DELTA) - #if HAS_CURRENT_HOME(X) - saved_current_X = stepperX.getMilliamps(); - stepperX.rms_current(X_CURRENT_HOME); - debug_current_on(PSTR("X"), saved_current_X, X_CURRENT_HOME); - #endif - #if HAS_CURRENT_HOME(Y) - saved_current_Y = stepperY.getMilliamps(); - stepperY.rms_current(Y_CURRENT_HOME); - debug_current_on(PSTR("Y"), saved_current_Y, Y_CURRENT_HOME); - #endif - #endif - #if HAS_CURRENT_HOME(Z) - saved_current_Z = stepperZ.getMilliamps(); - stepperZ.rms_current(Z_CURRENT_HOME); - debug_current_on(PSTR("Z"), saved_current_Z, Z_CURRENT_HOME); - #endif - TERN_(IMPROVE_HOMING_RELIABILITY, planner.enable_stall_prevention(true)); - } - else { - #if ENABLED(DELTA) - #if HAS_CURRENT_HOME(X) - stepperX.rms_current(saved_current_X); - debug_current_on(PSTR("X"), X_CURRENT_HOME, saved_current_X); - #endif - #if HAS_CURRENT_HOME(Y) - stepperY.rms_current(saved_current_Y); - debug_current_on(PSTR("Y"), Y_CURRENT_HOME, saved_current_Y); - #endif - #endif - #if HAS_CURRENT_HOME(Z) - stepperZ.rms_current(saved_current_Z); - debug_current_on(PSTR("Z"), Z_CURRENT_HOME, saved_current_Z); - #endif - TERN_(IMPROVE_HOMING_RELIABILITY, planner.enable_stall_prevention(false)); + if (TEST(endstops.state(), Z_MAX)) { + NOLESS(largest_sensorless_adj, offset_sensorless_adj.c); + DEBUG_ECHOLNPGM("Endstop_Z: ", largest_sensorless_adj, " TowerZ"); } #endif } diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h index a65f982bb6..5a596053d8 100644 --- a/Marlin/src/module/probe.h +++ b/Marlin/src/module/probe.h @@ -66,7 +66,13 @@ class Probe { public: #if ENABLED(SENSORLESS_PROBING) - typedef struct { bool x:1, y:1, z:1; } sense_bool_t; + typedef struct { + #if HAS_DELTA_SENSORLESS_PROBING + bool x:1, y:1, z:1; + #else + bool z; + #endif + } sense_bool_t; static sense_bool_t test_sensitivity; #endif @@ -299,7 +305,8 @@ public: #if USE_SENSORLESS static void enable_stallguard_diag1(); static void disable_stallguard_diag1(); - static void set_homing_current(const bool onoff); + static void set_offset_sensorless_adj(const_float_t sz); + static void refresh_largest_sensorless_adj(); #endif private: