Browse Source

Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces

Remove unnecessary tabs and spaces
pull/1/head
Scott Lahteine 8 years ago
committed by GitHub
parent
commit
fa7010b0a1
  1. 10
      Marlin/Configuration.h
  2. 4
      Marlin/Configuration_adv.h
  3. 6
      Marlin/M100_Free_Mem_Chk.cpp
  4. 2
      Marlin/Marlin_main.cpp
  5. 4
      Marlin/endstops.cpp
  6. 10
      Marlin/example_configurations/Cartesio/Configuration.h
  7. 4
      Marlin/example_configurations/Cartesio/Configuration_adv.h
  8. 10
      Marlin/example_configurations/Felix/Configuration.h
  9. 4
      Marlin/example_configurations/Felix/Configuration_adv.h
  10. 10
      Marlin/example_configurations/Felix/DUAL/Configuration.h
  11. 10
      Marlin/example_configurations/Hephestos/Configuration.h
  12. 4
      Marlin/example_configurations/Hephestos/Configuration_adv.h
  13. 10
      Marlin/example_configurations/K8200/Configuration.h
  14. 4
      Marlin/example_configurations/K8200/Configuration_adv.h
  15. 10
      Marlin/example_configurations/K8400/Configuration.h
  16. 4
      Marlin/example_configurations/K8400/Configuration_adv.h
  17. 10
      Marlin/example_configurations/K8400/Dual-head/Configuration.h
  18. 10
      Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
  19. 10
      Marlin/example_configurations/RigidBot/Configuration.h
  20. 4
      Marlin/example_configurations/RigidBot/Configuration_adv.h
  21. 10
      Marlin/example_configurations/SCARA/Configuration.h
  22. 4
      Marlin/example_configurations/SCARA/Configuration_adv.h
  23. 10
      Marlin/example_configurations/TAZ4/Configuration.h
  24. 4
      Marlin/example_configurations/TAZ4/Configuration_adv.h
  25. 10
      Marlin/example_configurations/WITBOX/Configuration.h
  26. 4
      Marlin/example_configurations/WITBOX/Configuration_adv.h
  27. 10
      Marlin/example_configurations/adafruit/ST7565/Configuration.h
  28. 4
      Marlin/example_configurations/delta/biv2.5/Configuration.h
  29. 4
      Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
  30. 10
      Marlin/example_configurations/delta/generic/Configuration.h
  31. 4
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  32. 10
      Marlin/example_configurations/delta/kossel_mini/Configuration.h
  33. 4
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  34. 10
      Marlin/example_configurations/delta/kossel_pro/Configuration.h
  35. 4
      Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
  36. 10
      Marlin/example_configurations/delta/kossel_xl/Configuration.h
  37. 4
      Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
  38. 10
      Marlin/example_configurations/makibox/Configuration.h
  39. 4
      Marlin/example_configurations/makibox/Configuration_adv.h
  40. 10
      Marlin/example_configurations/tvrrug/Round2/Configuration.h
  41. 4
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
  42. 6
      Marlin/language_tr.h
  43. 2
      Marlin/pins.h
  44. 2
      Marlin/pins_MEGATRONICS_3.h
  45. 2
      Marlin/pins_RIGIDBOARD_V2.h
  46. 10
      Marlin/planner.cpp
  47. 8
      Marlin/planner.h
  48. 4
      Marlin/stepper.cpp
  49. 2
      Marlin/stepper.h
  50. 4
      Marlin/stepper_dac.cpp
  51. 2
      Marlin/temperature.cpp

10
Marlin/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -827,10 +827,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

6
Marlin/M100_Free_Mem_Chk.cpp

@ -22,10 +22,10 @@
/**
* M100 Free Memory Watcher
*
*
* This code watches the free memory block between the bottom of the heap and the top of the stack.
* This memory block is initialized and watched via the M100 command.
*
*
* M100 I Initializes the free memory block and prints vitals statistics about the area
* M100 F Identifies how much of the free memory block remains free and unused. It also
* detects and reports any corruption within the free memory block that may have
@ -34,7 +34,7 @@
* data that does not match the expected value.
* M100 C x Corrupts x locations within the free memory block. This is useful to check the
* correctness of the M100 F and M100 D commands.
*
*
* Initial version by Roxy-3DPrintBoard
*/
#define M100_FREE_MEMORY_DUMPER // Comment out to remove Dump sub-command

2
Marlin/Marlin_main.cpp

@ -5259,7 +5259,7 @@ inline void gcode_M104() {
if (code_value_temp_abs() > thermalManager.degHotend(target_extruder)) LCD_MESSAGEPGM(MSG_HEATING);
}
#if ENABLED(AUTOTEMP)
planner.autotemp_M104_M109();
#endif

4
Marlin/endstops.cpp

@ -255,14 +255,14 @@ void Endstops::update() {
} \
} while(0)
#if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN) // If G38 command then check Z_MIN for every axis and every direction
#if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN) // If G38 command then check Z_MIN for every axis and every direction
#define UPDATE_ENDSTOP(AXIS,MINMAX) do { \
_UPDATE_ENDSTOP(AXIS,MINMAX,NOOP); \
if (G38_move) _UPDATE_ENDSTOP(Z, MIN, G38_endstop_hit = true); \
} while(0)
#else
#else
#define UPDATE_ENDSTOP(AXIS,MINMAX) _UPDATE_ENDSTOP(AXIS,MINMAX,NOOP)

10
Marlin/example_configurations/Cartesio/Configuration.h

@ -207,7 +207,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -232,13 +232,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -827,10 +827,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/Cartesio/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/Felix/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -810,10 +810,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/Felix/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/Felix/DUAL/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -810,10 +810,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

10
Marlin/example_configurations/Hephestos/Configuration.h

@ -209,7 +209,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -234,13 +234,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -819,10 +819,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/Hephestos/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/K8200/Configuration.h

@ -226,7 +226,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -251,13 +251,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -856,10 +856,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/K8200/Configuration_adv.h

@ -481,12 +481,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/K8400/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -827,10 +827,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/K8400/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/K8400/Dual-head/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -827,10 +827,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

10
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -827,10 +827,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

10
Marlin/example_configurations/RigidBot/Configuration.h

@ -209,7 +209,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -234,13 +234,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -826,10 +826,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/RigidBot/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/SCARA/Configuration.h

@ -238,7 +238,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -263,13 +263,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -842,10 +842,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/SCARA/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/TAZ4/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -848,10 +848,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/TAZ4/Configuration_adv.h

@ -476,12 +476,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/WITBOX/Configuration.h

@ -209,7 +209,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -234,13 +234,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -819,10 +819,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/WITBOX/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/adafruit/ST7565/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -827,10 +827,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/delta/biv2.5/Configuration.h

@ -921,10 +921,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@ -470,12 +470,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/delta/generic/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -915,10 +915,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/delta/generic/Configuration_adv.h

@ -470,12 +470,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/delta/kossel_mini/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -918,10 +918,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@ -470,12 +470,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/delta/kossel_pro/Configuration.h

@ -210,7 +210,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -235,13 +235,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -917,10 +917,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@ -475,12 +475,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/delta/kossel_xl/Configuration.h

@ -199,7 +199,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -224,13 +224,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -921,10 +921,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@ -470,12 +470,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/makibox/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -830,10 +830,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/makibox/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

10
Marlin/example_configurations/tvrrug/Round2/Configuration.h

@ -206,7 +206,7 @@
/**
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
*
*
* Temperature sensors available:
*
* -3 : thermocouple with MAX31855 (only for sensor 0)
@ -231,13 +231,13 @@
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
*
*
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
* (but gives greater accuracy and more stable PID)
* 51 : 100k thermistor - EPCOS (1k pullup)
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
*
*
* 1047 : Pt1000 with 4k7 pullup
* 1010 : Pt1000 with 1k pullup (non standard)
* 147 : Pt100 with 4k7 pullup
@ -823,10 +823,10 @@
// The height can be set with M420 Z<height>
#define ENABLE_LEVELING_FADE_HEIGHT
//
//
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//
//#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points

4
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@ -468,12 +468,12 @@
/**
* Additional options for Graphical Displays
*
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.

6
Marlin/language_tr.h

@ -57,12 +57,12 @@
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset Tamam") // Offset Tamam
#define MSG_SET_ORIGIN _UxGT("Sıfır Belirle") // Sıfır Belirle
#define MSG_PREHEAT_1 _UxGT("Ön Isınma PLA") // Ön Isınma PLA
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tüm") // Tüm
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Tabla") // Tabla
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Ayar") // Ayar
#define MSG_PREHEAT_2 _UxGT("Ön Isınma ABS") // Ön Isınma ABS
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tüm") // Tüm
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Tabla") // Tabla
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Ayar") // Ayar
@ -91,7 +91,7 @@
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") // Max
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Çarpan") // Çarpan
#define MSG_AUTOTEMP _UxGT("Autotemp") // Autotemp
#define MSG_ON _UxGT("On ") // On
#define MSG_ON _UxGT("On ") // On
#define MSG_OFF _UxGT("Off") // Off
#define MSG_PID_P _UxGT("PID-P") // PID-P
#define MSG_PID_I _UxGT("PID-I") // PID-I

2
Marlin/pins.h

@ -135,7 +135,7 @@
#include "pins_MEGATRONICS_3.h"
#elif MB(MEGATRONICS_31)
#define MEGATRONICS_31
#include "pins_MEGATRONICS_3.h"
#include "pins_MEGATRONICS_3.h"
#elif MB(OMCA_A)
#include "pins_OMCA_A.h"
#elif MB(OMCA)

2
Marlin/pins_MEGATRONICS_3.h

@ -153,7 +153,7 @@
#define LCD_PINS_D5 30
#define LCD_PINS_D6 39
#define LCD_PINS_D7 15
#define SHIFT_CLK 43
#define SHIFT_LD 35
#define SHIFT_OUT 34

2
Marlin/pins_RIGIDBOARD_V2.h

@ -39,7 +39,7 @@
#define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value
#define DAC_STEPPER_ADDRESS 0
#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096
#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096
#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V
#define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2
#define DAC_DISABLE_PIN 42 // set low to enable DAC

10
Marlin/planner.cpp

@ -675,7 +675,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
const float target_float[XYZE] = { a, b, c, e },
de_float = target_float[E_AXIS] - position_float[E_AXIS],
mm_D_float = sqrt(sq(target_float[X_AXIS] - position_float[X_AXIS]) + sq(target_float[Y_AXIS] - position_float[Y_AXIS]));
memcpy(position_float, target_float, sizeof(position_float));
#endif
@ -1108,7 +1108,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
if (accel * block->steps[AXIS] > comp) accel = comp / block->steps[AXIS]; \
} \
}while(0)
#define LIMIT_ACCEL_FLOAT(AXIS,INDX) do{ \
if (block->steps[AXIS] && max_acceleration_steps_per_s2[AXIS+INDX] < accel) { \
const float comp = (float)max_acceleration_steps_per_s2[AXIS+INDX] * (float)block->step_event_count; \
@ -1292,11 +1292,11 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
// Use LIN_ADVANCE for blocks if all these are true:
//
// esteps : We have E steps todo (a printing move)
//
//
// block->steps[X_AXIS] || block->steps[Y_AXIS] : We have a movement in XY direction (i.e., not retract / prime).
//
//
// extruder_advance_k : There is an advance factor set.
//
//
// block->steps[E_AXIS] != block->step_event_count : A problem occurs if the move before a retract is too small.
// In that case, the retract and move will be executed together.
// This leads to too many advance steps due to a huge e_acceleration.

8
Marlin/planner.h

@ -123,7 +123,7 @@ typedef struct {
#if ENABLED(BARICUDA)
uint32_t valve_pressure, e_to_p_pressure;
#endif
uint32_t segment_time;
} block_t;
@ -185,7 +185,7 @@ class Planner {
* Nominal speed of previous path line segment
*/
static float previous_nominal_speed;
/**
* Limit where 64bit math is necessary for acceleration calculation
*/
@ -206,7 +206,7 @@ class Planner {
// Segment times (in µs). Used for speed calculations
static long axis_segment_time[2][3];
#endif
#if ENABLED(LIN_ADVANCE)
static float position_float[NUM_AXIS];
static float extruder_advance_k;
@ -264,7 +264,7 @@ class Planner {
#define ARG_Z const float &lz
#endif
#if ENABLED(LIN_ADVANCE)
void advance_M905(const float &k);
#endif

4
Marlin/stepper.cpp

@ -338,7 +338,7 @@ void Stepper::isr() {
CBI(TIMSK0, OCIE0B); //Temperature ISR
DISABLE_STEPPER_DRIVER_INTERRUPT();
sei();
if (cleaning_buffer_counter) {
--cleaning_buffer_counter;
current_block = NULL;
@ -583,7 +583,7 @@ void Stepper::isr() {
#endif
}
#endif
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
// If we have esteps to execute, fire the next advance_isr "now"
if (e_steps[TOOL_E_INDEX]) OCR0A = TCNT0 + 2;

2
Marlin/stepper.h

@ -358,7 +358,7 @@ class Stepper {
acc_step_rate = current_block->initial_rate;
acceleration_time = calc_timer(acc_step_rate);
OCR1A = acceleration_time;
#if ENABLED(LIN_ADVANCE)
if (current_block->use_advance_lead) {
current_estep_rate[current_block->active_extruder] = ((unsigned long)acc_step_rate * current_block->abs_adv_steps_multiplier8) >> 17;

4
Marlin/stepper_dac.cpp

@ -88,7 +88,7 @@
static float dac_perc(int8_t n) { return 100.0 * mcp4728_getValue(dac_order[n]) * (1.0 / (DAC_STEPPER_MAX)); }
static float dac_amps(int8_t n) { return mcp4728_getDrvPct(dac_order[n]) * (DAC_STEPPER_MAX) * 0.125 * (1.0 / (DAC_STEPPER_SENSE)); }
int16_t dac_current_get_percent(AxisEnum axis) { return mcp4728_getDrvPct(dac_order[axis]); }
void dac_current_set_percents(int16_t pct[XYZE]) {
LOOP_XYZE(i) dac_channel_pct[i] = pct[dac_order[i]];
@ -101,7 +101,7 @@
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Stepper current values in % (Amps):");
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" X:", dac_perc(X_AXIS));
SERIAL_ECHOPAIR(" X:", dac_perc(X_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(X_AXIS));
SERIAL_ECHOPAIR(") Y:", dac_perc(Y_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(Y_AXIS));

2
Marlin/temperature.cpp

@ -1943,6 +1943,6 @@ void Temperature::isr() {
if (!endstop_monitor_count) endstop_monitor(); // report changes in endstop status
}
#endif
SBI(TIMSK0, OCIE0B); //re-enable Temperature ISR
}

Loading…
Cancel
Save