Browse Source
Co-authored-by: Gonçalo Pereira <goncalo_pereira@outlook.pt> Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>vanilla_fb_2.0.x
Justin Nesselrotte
3 years ago
committed by
Scott Lahteine
Scott Lahteine
7 changed files with 237 additions and 0 deletions
@ -0,0 +1,157 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
/**
|
||||
|
* STM32F407VET6 on Index PnP Mobo Rev03 |
||||
|
* Website - https://indexmachines.io/
|
||||
|
*/ |
||||
|
|
||||
|
#define ALLOW_STM32DUINO |
||||
|
#include "env_validate.h" |
||||
|
|
||||
|
#define BOARD_INFO_NAME "Index Mobo Rev03" |
||||
|
#define DEFAULT_MACHINE_NAME "Index Pick and Place" |
||||
|
|
||||
|
/**
|
||||
|
* By default, the extra stepper motor configuration is: |
||||
|
* I = Left Head |
||||
|
* J = Right Head |
||||
|
* K = Auxiliary (Conveyor belt) |
||||
|
*/ |
||||
|
|
||||
|
#define SRAM_EEPROM_EMULATION |
||||
|
#define MARLIN_EEPROM_SIZE 0x2000 // 8KB
|
||||
|
|
||||
|
//
|
||||
|
// Servos
|
||||
|
//
|
||||
|
#define SERVO0_PIN PB10 |
||||
|
#define SERVO1_PIN PB11 |
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#define X_STOP_PIN PC6 |
||||
|
#define Y_STOP_PIN PD15 |
||||
|
#define Z_STOP_PIN PD14 |
||||
|
|
||||
|
// None of these require limit switches by default, so we leave these commented
|
||||
|
// here for your reference.
|
||||
|
// #define I_MIN_PIN PA8
|
||||
|
// #define I_MAX_PIN PA8
|
||||
|
// #define J_MIN_PIN PD13
|
||||
|
// #define J_MAX_PIN PD13
|
||||
|
// #define K_MIN_PIN PC9
|
||||
|
// #define K_MAX_PIN PC9
|
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
#define X_STEP_PIN PB15 |
||||
|
#define X_DIR_PIN PB14 |
||||
|
#define X_ENABLE_PIN PD9 |
||||
|
#define X_SERIAL_TX_PIN PD8 |
||||
|
#define X_SERIAL_RX_PIN PD8 |
||||
|
|
||||
|
#define Y_STEP_PIN PE15 |
||||
|
#define Y_DIR_PIN PE14 |
||||
|
#define Y_ENABLE_PIN PB13 |
||||
|
#define Y_SERIAL_TX_PIN PB12 |
||||
|
#define Y_SERIAL_RX_PIN PB12 |
||||
|
|
||||
|
#define Z_STEP_PIN PE7 |
||||
|
#define Z_DIR_PIN PB1 |
||||
|
#define Z_ENABLE_PIN PE9 |
||||
|
#define Z_SERIAL_TX_PIN PE8 |
||||
|
#define Z_SERIAL_RX_PIN PE8 |
||||
|
|
||||
|
#define I_STEP_PIN PC4 |
||||
|
#define I_DIR_PIN PA4 |
||||
|
#define I_ENABLE_PIN PB0 |
||||
|
#define I_SERIAL_TX_PIN PC5 |
||||
|
#define I_SERIAL_RX_PIN PC5 |
||||
|
|
||||
|
#define J_STEP_PIN PE11 |
||||
|
#define J_DIR_PIN PE10 |
||||
|
#define J_ENABLE_PIN PE13 |
||||
|
#define J_SERIAL_TX_PIN PE12 |
||||
|
#define J_SERIAL_RX_PIN PE12 |
||||
|
#define K_SERIAL_TX_PIN PA2 |
||||
|
#define K_SERIAL_RX_PIN PA2 |
||||
|
|
||||
|
#define K_STEP_PIN PD6 |
||||
|
#define K_DIR_PIN PD7 |
||||
|
#define K_ENABLE_PIN PA3 |
||||
|
|
||||
|
// Reduce baud rate to improve software serial reliability
|
||||
|
#define TMC_BAUD_RATE 19200 |
||||
|
|
||||
|
// Not required for this board. Fails to compile otherwise.
|
||||
|
// PD0 is not connected on this board.
|
||||
|
#define TEMP_0_PIN PD0 |
||||
|
|
||||
|
// General use mosfets, useful for things like pumps and solenoids
|
||||
|
#define FAN_PIN PE2 |
||||
|
#define FAN1_PIN PE3 |
||||
|
#define FAN2_PIN PE4 |
||||
|
#define FAN3_PIN PE5 |
||||
|
|
||||
|
// Neopixel Rings
|
||||
|
#define NEOPIXEL_PIN PC7 |
||||
|
#define NEOPIXEL2_PIN PC8 |
||||
|
|
||||
|
// SPI
|
||||
|
#define MISO_PIN PB4 |
||||
|
#define MOSI_PIN PB5 |
||||
|
#define SCK_PIN PB3 |
||||
|
|
||||
|
// I2C
|
||||
|
#define I2C_SDA_PIN PB7 |
||||
|
#define I2C_SCL_PIN PB6 |
||||
|
|
||||
|
/**
|
||||
|
* The index mobo rev03 has 3 aux ports. We define them here so they may be used |
||||
|
* in other places and to make sure someone doesn't have to go look up the pinout |
||||
|
* in the board files. Each 12 pin aux port has this pinout: |
||||
|
* |
||||
|
* VDC 1 2 GND |
||||
|
* 3.3V 3 4 SCL (I2C_SCL_PIN) |
||||
|
* PWM1 5 6 SDA (I2C_SDA_PIN) |
||||
|
* PWM2 7 8 CIPO (MISO_PIN) |
||||
|
* A1 9 10 COPI (MOSI_PIN) |
||||
|
* A2 11 12 SCK (SCK_PIN) |
||||
|
*/ |
||||
|
#define INDEX_AUX1_PWM1 PA15 |
||||
|
#define INDEX_AUX1_PWM2 PA5 |
||||
|
#define INDEX_AUX1_A1 PC0 |
||||
|
#define INDEX_AUX1_A2 PC1 |
||||
|
|
||||
|
#define INDEX_AUX2_PWM1 PA6 |
||||
|
#define INDEX_AUX2_PWM2 PA7 |
||||
|
#define INDEX_AUX2_A1 PC2 |
||||
|
#define INDEX_AUX2_A2 PC3 |
||||
|
|
||||
|
#define INDEX_AUX3_PWM1 PB8 |
||||
|
#define INDEX_AUX3_PWM2 PB9 |
||||
|
#define INDEX_AUX3_A1 PA0 |
||||
|
#define INDEX_AUX3_A2 PA1 |
||||
@ -0,0 +1,51 @@ |
|||||
|
{ |
||||
|
"build": { |
||||
|
"core": "stm32", |
||||
|
"cpu": "cortex-m4", |
||||
|
"extra_flags": "-DSTM32F407xx", |
||||
|
"f_cpu": "168000000L", |
||||
|
"hwids": [ |
||||
|
[ |
||||
|
"0x1EAF", |
||||
|
"0x0003" |
||||
|
], |
||||
|
[ |
||||
|
"0x0483", |
||||
|
"0x3748" |
||||
|
], |
||||
|
[ |
||||
|
"0x0483", |
||||
|
"0xdf11" |
||||
|
] |
||||
|
], |
||||
|
"mcu": "stm32f407vet6", |
||||
|
"variant": "MARLIN_F407VE" |
||||
|
}, |
||||
|
"debug": { |
||||
|
"jlink_device": "STM32F407VE", |
||||
|
"openocd_target": "stm32f4x", |
||||
|
"svd_path": "STM32F40x.svd" |
||||
|
}, |
||||
|
"frameworks": [ |
||||
|
"arduino", |
||||
|
"stm32cube" |
||||
|
], |
||||
|
"name": "STM32F407VE (192k RAM. 512k Flash)", |
||||
|
"upload": { |
||||
|
"disable_flushing": false, |
||||
|
"maximum_ram_size": 131072, |
||||
|
"maximum_size": 524288, |
||||
|
"protocol": "stlink", |
||||
|
"protocols": [ |
||||
|
"stlink", |
||||
|
"dfu", |
||||
|
"jlink", |
||||
|
"blackmagic" |
||||
|
], |
||||
|
"require_upload_port": true, |
||||
|
"use_1200bps_touch": false, |
||||
|
"wait_for_upload_port": false |
||||
|
}, |
||||
|
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html", |
||||
|
"vendor": "Generic" |
||||
|
} |
||||
@ -0,0 +1,13 @@ |
|||||
|
#!/usr/bin/env bash |
||||
|
# |
||||
|
# Build tests for Index_Mobo_Rev03 |
||||
|
# |
||||
|
|
||||
|
# exit on first failure |
||||
|
set -e |
||||
|
|
||||
|
use_example_configs Index/REV_03 |
||||
|
exec_test $1 $2 "Index REV03 Pick and Place" "$3" |
||||
|
|
||||
|
# cleanup |
||||
|
restore_configs |
||||
Loading…
Reference in new issue