Power options formatting

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -331,9 +331,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -368,9 +368,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Alfawise/U20/Configuration.h

@@ -368,9 +368,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/AliExpress/CL-260/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Anet/A2/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Anet/A2plus/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Anet/A6/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Anet/A8/Configuration.h

@@ -331,9 +331,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Anet/A8plus/Configuration.h

@@ -331,9 +331,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Anet/E16/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/AnyCubic/i3/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/ArmEd/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Artillery/Sidewinder X1/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Azteeg/X5GT/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/BIBO/TouchX/default/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/BQ/Hephestos/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/BQ/Hephestos_2/Configuration.h

@@ -338,9 +338,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/BQ/WITBOX/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Cartesio/Configuration.h

@@ -331,9 +331,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/CR-10/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/CR-10S/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/CR-10_5S/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/CR-10mini/Configuration.h

@@ -339,9 +339,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/CR-20/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/CR-8/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/Ender-2/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/Ender-3/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/Ender-4/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/Ender-5 Pro/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Creality/Ender-5/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Dagoma/Disco Ultimate/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Einstart-S/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FYSETC/AIO_II/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FYSETC/Cheetah 1.2/base/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FYSETC/Cheetah/BLTouch/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FYSETC/Cheetah/base/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FYSETC/F6_13/Configuration.h

@@ -332,9 +332,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FYSETC/S6/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Felix/DUAL/Configuration.h

@@ -327,11 +327,12 @@
 #if ENABLED(PSU_CONTROL)
   #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  #define PSU_DEFAULT_OFF       // Keep power off until enabled directly with M80
+  #define PSU_DEFAULT_OFF           // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Felix/Single/Configuration.h

@@ -327,11 +327,12 @@
 #if ENABLED(PSU_CONTROL)
   #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  #define PSU_DEFAULT_OFF       // Keep power off until enabled directly with M80
+  #define PSU_DEFAULT_OFF           // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Formbot/Raptor/Configuration.h

@@ -371,9 +371,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -339,9 +339,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -334,9 +334,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/A10/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/A10D/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/A10M/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/A10T/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/A20/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/A20M/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/A20T/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/A30/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/E180/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/GT2560/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/PI3A PRO/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/HMS434/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Infitary/i3-M508/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/JGAurora/A1/Configuration.h

@@ -335,9 +335,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/JGAurora/A5/Configuration.h

@@ -335,9 +335,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/JGAurora/A5S/Configuration.h

@@ -335,9 +335,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/MakerParts/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Malyan/M150/Configuration.h

@@ -335,9 +335,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Malyan/M200/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Micromake/C1/basic/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Mks/Robin/Configuration.h

@@ -331,9 +331,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Mks/Sbase/Configuration.h

@@ -327,11 +327,12 @@
 #if ENABLED(PSU_CONTROL)
   #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  #define PSU_DEFAULT_OFF       // Keep power off until enabled directly with M80
+  #define PSU_DEFAULT_OFF           // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Modix/Big60/Configuration.h

@@ -325,13 +325,14 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX (1), 'true' for X-Box (2)
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PS_DEFAULT_OFF          // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -331,9 +331,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/RapideLite/RL200/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Renkforce/RF100/Configuration.h

@@ -333,9 +333,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Renkforce/RF100XL/Configuration.h

@@ -333,9 +333,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Renkforce/RF100v2/Configuration.h

@@ -333,9 +333,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/RepRapPro/Huxley/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/RigidBot/Configuration.h

@@ -333,9 +333,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/SCARA/MP_SCARA/Configuration.h

@@ -365,13 +365,14 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX (1), 'true' for X-Box (2)
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PS_DEFAULT_OFF          // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/SCARA/Morgan/Configuration.h

@@ -370,9 +370,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/STM32/Black_STM32F407VET6/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/STM32/STM32F103RE/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/STM32/STM32F4/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/STM32/stm32f103ret6/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Sanguinololu/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Tevo/Michelangelo/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

config/examples/Tevo/Tarantula Pro/Configuration.h

@@ -330,9 +330,9 @@
   //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN