Michael Triffon
7 years ago
committed by
Scott Lahteine
Scott Lahteine
56 changed files with 452 additions and 209 deletions
@ -0,0 +1,182 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
/**
|
|||
* Azteeg X5 MINI pin assignments |
|||
*/ |
|||
|
|||
#ifndef TARGET_LPC1768 |
|||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE." |
|||
#endif |
|||
|
|||
#ifndef BOARD_NAME |
|||
#define BOARD_NAME "Azteeg X5 MINI WIFI" |
|||
#define DEFAULT_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
|
|||
#endif |
|||
|
|||
//
|
|||
// Set CPU
|
|||
//
|
|||
#undef F_CPU |
|||
#define F_CPU 120000000 |
|||
|
|||
//
|
|||
// Servo
|
|||
//
|
|||
#define SERVO0_PIN P1_23 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_MIN_PIN P1_24 |
|||
#define Y_MIN_PIN P1_26 |
|||
#define Z_MIN_PIN P1_28 |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN P2_01 |
|||
#define X_DIR_PIN P0_11 |
|||
#define X_ENABLE_PIN P0_10 |
|||
|
|||
#define Y_STEP_PIN P2_02 |
|||
#define Y_DIR_PIN P0_20 |
|||
#define Y_ENABLE_PIN P0_19 |
|||
|
|||
#define Z_STEP_PIN P2_03 |
|||
#define Z_DIR_PIN P0_22 |
|||
#define Z_ENABLE_PIN P0_21 |
|||
|
|||
#define E0_STEP_PIN P2_00 |
|||
#define E0_DIR_PIN P0_05 |
|||
#define E0_ENABLE_PIN P0_04 |
|||
|
|||
//
|
|||
// DIGIPOT slave addresses
|
|||
//
|
|||
#define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
|
|||
#define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
|
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
// 3.3V max when defined as an analog input
|
|||
//
|
|||
#define TEMP_BED_PIN 0 // A0 (TH1)
|
|||
#define TEMP_0_PIN 1 // A1 (TH2)
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_BED_PIN P2_07 |
|||
#define HEATER_0_PIN P2_05 |
|||
#ifndef FAN_PIN |
|||
#define FAN_PIN P0_26 |
|||
#endif |
|||
#define FAN1_PIN P1_25 |
|||
|
|||
//
|
|||
// Display
|
|||
//
|
|||
#if ENABLED(ULTRA_LCD) |
|||
|
|||
#if ENABLED(CR10_STOCKDISPLAY) |
|||
|
|||
// Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
|
|||
// Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
|
|||
// 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
|
|||
// Requires REVERSE_ENCODER_DIRECTION in Configuration.h
|
|||
|
|||
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
|
|||
|
|||
#define BTN_EN1 P0_16 // J3-7 & AUX-4
|
|||
#define BTN_EN2 P1_23 // J3-5 & AUX-4
|
|||
#define BTN_ENC P3_25 // J3-4 & AUX-4
|
|||
|
|||
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
|
|||
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
|
|||
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
|
|||
|
|||
#else |
|||
|
|||
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
|||
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
|||
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
|||
|
|||
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
|||
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
|||
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
|
|||
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
|||
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
|||
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|||
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
|||
|
|||
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
|||
|
|||
#if ENABLED(REPRAPWORLD_KEYPAD) |
|||
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|||
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
|
|||
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
|||
#elif DISABLED(NEWPANEL) |
|||
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
|
|||
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
|
|||
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
|
|||
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
|
|||
#endif |
|||
|
|||
#if ENABLED(VIKI2) || ENABLED(miniVIKI) |
|||
//#define LCD_SCREEN_ROT_180
|
|||
|
|||
#define BEEPER_PIN P1_30 // (37) may change if cable changes
|
|||
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
|||
#define DOGLCD_SCK SCK_PIN |
|||
#define DOGLCD_MOSI MOSI_PIN |
|||
|
|||
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
|
|||
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
|
|||
#else |
|||
#if ENABLED(ULTIPANEL) |
|||
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
|
|||
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
|
|||
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
|
|||
#endif |
|||
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
|||
#define DOGLCD_CS P0_16 // (16)
|
|||
#endif |
|||
|
|||
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
|
|||
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
|
|||
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
|
|||
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS
|
|||
|
|||
#if ENABLED(MINIPANEL) |
|||
// GLCD features
|
|||
//#define LCD_CONTRAST 190
|
|||
// Uncomment screen orientation
|
|||
//#define LCD_SCREEN_ROT_90
|
|||
//#define LCD_SCREEN_ROT_180
|
|||
//#define LCD_SCREEN_ROT_270
|
|||
#endif |
|||
|
|||
#endif |
|||
|
|||
#endif // ULTRA_LCD
|
|||
Loading…
Reference in new issue