Browse Source

Creality Ender board support

pull/1/head
Scott Lahteine 7 years ago
parent
commit
f887719a40
  1. 3
      Marlin/src/Makefile
  2. 1
      Marlin/src/core/boards.h
  3. 22
      Marlin/src/lcd/dogm/dogm_bitmaps.h
  4. 2
      Marlin/src/lcd/language/language_en.h
  5. 13
      Marlin/src/lcd/ultralcd_impl_DOGM.h
  6. 2
      Marlin/src/pins/pins.h
  7. 34
      Marlin/src/pins/pins_CREALITY_ENDER.h
  8. 7
      Marlin/src/pins/pins_SANGUINOLOLU_11.h

3
Marlin/src/Makefile

@ -176,6 +176,9 @@ MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),69) else ifeq ($(HARDWARE_MOTHERBOARD),69)
HARDWARE_VARIANT ?= Sanguino HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),601)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
#Ultimaker #Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),7) else ifeq ($(HARDWARE_MOTHERBOARD),7)

1
Marlin/src/core/boards.h

@ -115,6 +115,7 @@
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version) #define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc) #define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc)
#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board #define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board
#define BOARD_CREALITY_ENDER 601 // Creality Ender
#define BOARD_STB_11 64 // STB V1.1 #define BOARD_STB_11 64 // STB V1.1
#define BOARD_AZTEEG_X1 65 // Azteeg X1 #define BOARD_AZTEEG_X1 65 // Azteeg X1

22
Marlin/src/lcd/dogm/dogm_bitmaps.h

@ -115,7 +115,14 @@
// When only one extruder is selected, the "1" on the symbol will not // When only one extruder is selected, the "1" on the symbol will not
// be displayed. // be displayed.
#if HAS_TEMP_BED #ifdef CUSTOM_STATUS_SCREEN_FILE
#undef STATUS_SCREENWIDTH
// This file must define STATUS_SCREENWIDTH and status_screen{0,1}_bmp.
// It can also define STATUS_SCREEN_X, STATUS_SCREEN_{BED,FAN}_TEXT_X and
// STATUS_SCREEN_HOTEND_TEXT_X(i) to modify draw locations.
#include CUSTOM_STATUS_SCREEN_FILE
#elif HAS_TEMP_BED
#if HOTENDS == 1 #if HOTENDS == 1
#define STATUS_SCREENWIDTH 115 //Width in pixels #define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels #define STATUS_SCREENHEIGHT 19 //Height in pixels
@ -513,3 +520,16 @@
}; };
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY #endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
#ifndef STATUS_SCREEN_X
#define STATUS_SCREEN_X 9
#endif
#ifndef STATUS_SCREEN_HOTEND_TEXT_X
#define STATUS_SCREEN_HOTEND_TEXT_X(i) (5 + (i) * 25)
#endif
#ifndef STATUS_SCREEN_BED_TEXT_X
#define STATUS_SCREEN_BED_TEXT_X 81
#endif
#ifndef STATUS_SCREEN_FAN_TEXT_X
#define STATUS_SCREEN_FAN_TEXT_X 104
#endif

2
Marlin/src/lcd/language/language_en.h

@ -37,7 +37,7 @@
#undef en #undef en
#ifndef WELCOME_MSG #ifndef WELCOME_MSG
#define WELCOME_MSG MACHINE_NAME _UxGT(" ready.") #define WELCOME_MSG MACHINE_NAME _UxGT(" Ready.")
#endif #endif
#ifndef MSG_BACK #ifndef MSG_BACK
#define MSG_BACK _UxGT("Back") #define MSG_BACK _UxGT("Back")

13
Marlin/src/lcd/ultralcd_impl_DOGM.h

@ -324,7 +324,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) {
u8g.firstPage(); u8g.firstPage();
do { do {
u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp); u8g.drawBitmapP(offx, offy, (START_BMPWIDTH + 7) / 8, START_BMPHEIGHT, start_bmp);
lcd_setFont(FONT_MENU); lcd_setFont(FONT_MENU);
#ifndef STRING_SPLASH_LINE2 #ifndef STRING_SPLASH_LINE2
u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT), STRING_SPLASH_LINE1); u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT), STRING_SPLASH_LINE1);
@ -365,7 +365,6 @@ static void lcd_implementation_init() {
#elif ENABLED(LCD_SCREEN_ROT_270) #elif ENABLED(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270° u8g.setRot270(); // Rotate screen by 270°
#endif #endif
} }
// The kill screen is displayed for unrecoverable conditions // The kill screen is displayed for unrecoverable conditions
@ -503,7 +502,9 @@ static void lcd_implementation_status_screen() {
if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) { if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) {
u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT, u8g.drawBitmapP(
STATUS_SCREEN_X, 1,
(STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT,
#if HAS_FAN0 #if HAS_FAN0
blink && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp blink && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp
#else #else
@ -519,11 +520,11 @@ static void lcd_implementation_status_screen() {
if (PAGE_UNDER(28)) { if (PAGE_UNDER(28)) {
// Extruders // Extruders
HOTEND_LOOP() _draw_heater_status(5 + e * 25, e, blink); HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink);
// Heated bed // Heated bed
#if HOTENDS < 4 && HAS_TEMP_BED #if HOTENDS < 4 && HAS_TEMP_BED
_draw_heater_status(81, -1, blink); _draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink);
#endif #endif
#if HAS_FAN0 #if HAS_FAN0
@ -531,7 +532,7 @@ static void lcd_implementation_status_screen() {
// Fan // Fan
const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256; const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256;
if (per) { if (per) {
u8g.setPrintPos(104, 27); u8g.setPrintPos(STATUS_SCREEN_FAN_TEXT_X, 27);
lcd_print(itostr3(per)); lcd_print(itostr3(per));
u8g.print('%'); u8g.print('%');
} }

2
Marlin/src/pins/pins.h

@ -195,6 +195,8 @@
#include "pins_MELZI_CREALITY.h" // ATmega644P, ATmega1284P #include "pins_MELZI_CREALITY.h" // ATmega644P, ATmega1284P
#elif MB(MELZI_MALYAN) #elif MB(MELZI_MALYAN)
#include "pins_MELZI_MALYAN.h" // ATmega644P, ATmega1284P #include "pins_MELZI_MALYAN.h" // ATmega644P, ATmega1284P
#elif MB(CREALITY_ENDER)
#include "pins_CREALITY_ENDER.h" // ATmega1284P
#elif MB(STB_11) #elif MB(STB_11)
#include "pins_STB_11.h" // ATmega644P, ATmega1284P #include "pins_STB_11.h" // ATmega644P, ATmega1284P
#elif MB(AZTEEG_X1) #elif MB(AZTEEG_X1)

34
Marlin/src/pins/pins_CREALITY_ENDER.h

@ -0,0 +1,34 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Creality Ender pin assignments
*
* Applies to the following boards:
*
* Creality Ender-2
* Creality Ender-4
*/
#define BOARD_NAME "Creality Ender"
#include "pins_SANGUINOLOLU_12.h"

7
Marlin/src/pins/pins_SANGUINOLOLU_11.h

@ -114,7 +114,7 @@
#endif #endif
#if MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI) #if MB(AZTEEG_X1) || MB(STB_11) || MB(CREALITY_ENDER) || ENABLED(IS_MELZI)
#define FAN_PIN 4 // Works for Panelolu2 too #define FAN_PIN 4 // Works for Panelolu2 too
#endif #endif
@ -187,6 +187,11 @@
#define DOGLCD_CS 17 #define DOGLCD_CS 17
#define LCD_BACKLIGHT_PIN 28 // PA3 #define LCD_BACKLIGHT_PIN 28 // PA3
#elif MB(CREALITY_ENDER)
#define BEEPER_PIN 27
#define DOGLCD_CS 28
#else // !MAKRPANEL #else // !MAKRPANEL
#define DOGLCD_CS 29 #define DOGLCD_CS 29

Loading…
Cancel
Save