diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
index 5c4f5a4413..06e0d228e0 100644
--- a/Marlin/src/MarlinCore.cpp
+++ b/Marlin/src/MarlinCore.cpp
@@ -498,12 +498,7 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
         if (ENABLED(DISABLE_INACTIVE_Z)) DISABLE_AXIS_Z();
         if (ENABLED(DISABLE_INACTIVE_E)) disable_e_steppers();
 
-        #if BOTH(HAS_LCD_MENU, AUTO_BED_LEVELING_UBL)
-          if (ubl.lcd_map_control) {
-            ubl.lcd_map_control = false;
-            ui.defer_status_screen(false);
-          }
-        #endif
+        TERN_(AUTO_BED_LEVELING_UBL, ubl.steppers_were_disabled());
       }
     }
     else
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.cpp b/Marlin/src/feature/bedlevel/ubl/ubl.cpp
index e08debf1d3..a93f5218d3 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl.cpp
@@ -84,11 +84,7 @@
     _GRIDPOS(Y, 12), _GRIDPOS(Y, 13), _GRIDPOS(Y, 14), _GRIDPOS(Y, 15)
   );
 
-  #if HAS_LCD_MENU
-    bool unified_bed_leveling::lcd_map_control = false;
-  #endif
-
-  volatile int unified_bed_leveling::encoder_diff;
+  volatile int16_t unified_bed_leveling::encoder_diff;
 
   unified_bed_leveling::unified_bed_leveling() {
     reset();
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.h b/Marlin/src/feature/bedlevel/ubl/ubl.h
index 9e227f02d9..3455416a62 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl.h
+++ b/Marlin/src/feature/bedlevel/ubl/ubl.h
@@ -111,9 +111,12 @@ class unified_bed_leveling {
 
     #if HAS_LCD_MENU
       static bool lcd_map_control;
+      static void steppers_were_disabled();
+    #else
+      static inline void steppers_were_disabled() {}
     #endif
 
-    static volatile int encoder_diff; // Volatile because it's changed at interrupt time.
+    static volatile int16_t encoder_diff; // Volatile because buttons may changed it at interrupt time
 
     unified_bed_leveling();
 
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
index a3d45169bc..da3477078a 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -54,7 +54,18 @@
   #define UBL_G29_P31
 
   #if HAS_LCD_MENU
-    void _lcd_ubl_output_map_lcd();
+
+    bool unified_bed_leveling::lcd_map_control = false;
+
+    void unified_bed_leveling::steppers_were_disabled() {
+      if (lcd_map_control) {
+        lcd_map_control = false;
+        ui.defer_status_screen(false);
+      }
+    }
+
+    void ubl_map_screen();
+
   #endif
 
   #define SIZE_OF_LITTLE_RAISE 1
@@ -789,11 +800,11 @@
 
     bool click_and_hold(const clickFunc_t func=nullptr) {
       if (ui.button_pressed()) {
-        ui.quick_feedback(false);                // Preserve button state for click-and-hold
+        ui.quick_feedback(false);         // Preserve button state for click-and-hold
         const millis_t nxt = millis() + 1500UL;
-        while (ui.button_pressed()) {                // Loop while the encoder is pressed. Uses hardware flag!
-          idle();                                 // idle, of course
-          if (ELAPSED(millis(), nxt)) {           // After 1.5 seconds
+        while (ui.button_pressed()) {     // Loop while the encoder is pressed. Uses hardware flag!
+          idle();                         // idle, of course
+          if (ELAPSED(millis(), nxt)) {   // After 1.5 seconds
             ui.quick_feedback();
             if (func) (*func)();
             ui.wait_for_release();
@@ -995,9 +1006,9 @@
         lcd_mesh_edit_setup(new_z);
 
         do {
+          idle();
           new_z = lcd_mesh_edit();
           TERN_(UBL_MESH_EDIT_MOVES_Z, do_blocking_move_to_z(h_offset + new_z)); // Move the nozzle as the point is edited
-          idle();
           SERIAL_FLUSH();                                   // Prevent host M105 buffer overrun.
         } while (!ui.button_pressed());
 
@@ -1022,7 +1033,7 @@
       SERIAL_ECHOLNPGM("Done Editing Mesh");
 
       if (lcd_map_control)
-        ui.goto_screen(_lcd_ubl_output_map_lcd);
+        ui.goto_screen(ubl_map_screen);
       else
         ui.return_to_status();
     }
diff --git a/Marlin/src/feature/touch/xpt2046.cpp b/Marlin/src/feature/touch/xpt2046.cpp
index 9c84e4d95c..879d88bab3 100644
--- a/Marlin/src/feature/touch/xpt2046.cpp
+++ b/Marlin/src/feature/touch/xpt2046.cpp
@@ -81,7 +81,6 @@
 #endif
 
 XPT2046 touch;
-extern int8_t encoderDiff;
 
 void XPT2046::init() {
   SET_INPUT(TOUCH_MISO_PIN);
diff --git a/Marlin/src/gcode/control/M17_M18_M84.cpp b/Marlin/src/gcode/control/M17_M18_M84.cpp
index 55a219917c..842f301d92 100644
--- a/Marlin/src/gcode/control/M17_M18_M84.cpp
+++ b/Marlin/src/gcode/control/M17_M18_M84.cpp
@@ -64,11 +64,6 @@ void GcodeSuite::M18_M84() {
     else
       planner.finish_and_disable();
 
-    #if BOTH(HAS_LCD_MENU, AUTO_BED_LEVELING_UBL)
-      if (ubl.lcd_map_control) {
-        ubl.lcd_map_control = false;
-        ui.defer_status_screen(false);
-      }
-    #endif
+    TERN_(AUTO_BED_LEVELING_UBL, ubl.steppers_were_disabled());
   }
 }
diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp
index 05491bfeea..7c384f1618 100644
--- a/Marlin/src/lcd/menu/menu.cpp
+++ b/Marlin/src/lcd/menu/menu.cpp
@@ -230,7 +230,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co
           screen = TERN(BABYSTEP_ZPROBE_OFFSET, lcd_babystep_zoffset, lcd_babystep_z);
         else {
           #if ENABLED(MOVE_Z_WHEN_IDLE)
-            move_menu_scale = MOVE_Z_IDLE_MULTIPLICATOR;
+            ui.manual_move.menu_scale = MOVE_Z_IDLE_MULTIPLICATOR;
             screen = lcd_move_z;
           #endif
         }
diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
index 381606bd14..7c25ca0afc 100644
--- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
+++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
@@ -46,7 +46,7 @@ void _man_probe_pt(const xy_pos_t &xy) {
     do_blocking_move_to_xy_z(xy, Z_CLEARANCE_BETWEEN_PROBES);
     ui.wait_for_move = false;
     ui.synchronize();
-    move_menu_scale = _MAX(PROBE_MANUALLY_STEP, MIN_STEPS_PER_SEGMENT / float(DEFAULT_XYZ_STEPS_PER_UNIT));
+    ui.manual_move.menu_scale = _MAX(PROBE_MANUALLY_STEP, MIN_STEPS_PER_SEGMENT / float(DEFAULT_XYZ_STEPS_PER_UNIT));
     ui.goto_screen(lcd_move_z);
   }
 }
diff --git a/Marlin/src/lcd/menu/menu_motion.cpp b/Marlin/src/lcd/menu/menu_motion.cpp
index 58594dd013..ff99358a8b 100644
--- a/Marlin/src/lcd/menu/menu_motion.cpp
+++ b/Marlin/src/lcd/menu/menu_motion.cpp
@@ -50,28 +50,13 @@
   float manual_move_e_origin = 0;
 #endif
 
-//
-// Tell ui.update() to start a move to current_position" after a short delay.
-//
-inline void manual_move_to_current(AxisEnum axis
-  #if MULTI_MANUAL
-    , const int8_t eindex=-1
-  #endif
-) {
-  #if MULTI_MANUAL
-    if (axis == E_AXIS) ui.manual_move_e_index = eindex >= 0 ? eindex : active_extruder;
-  #endif
-  ui.manual_move_start_time = millis() + (move_menu_scale < 0.99f ? 0UL : 250UL); // delay for bigger moves
-  ui.manual_move_axis = (int8_t)axis;
-}
-
 //
 // "Motion" > "Move Axis" submenu
 //
 
 static void _lcd_move_xyz(PGM_P const name, const AxisEnum axis) {
   if (ui.use_click()) return ui.goto_previous_screen_no_defer();
-  if (ui.encoderPosition && !ui.processing_manual_move) {
+  if (ui.encoderPosition && !ui.manual_move.processing) {
 
     // Start with no limits to movement
     float min = current_position[axis] - 1000,
@@ -105,13 +90,13 @@ static void _lcd_move_xyz(PGM_P const name, const AxisEnum axis) {
     #endif
 
     // Get the new position
-    const float diff = float(int32_t(ui.encoderPosition)) * move_menu_scale;
+    const float diff = float(int32_t(ui.encoderPosition)) * ui.manual_move.menu_scale;
     #if IS_KINEMATIC
-      ui.manual_move_offset += diff;
+      ui.manual_move.offset += diff;
       if (int32_t(ui.encoderPosition) < 0)
-        NOLESS(ui.manual_move_offset, min - current_position[axis]);
+        NOLESS(ui.manual_move.offset, min - current_position[axis]);
       else
-        NOMORE(ui.manual_move_offset, max - current_position[axis]);
+        NOMORE(ui.manual_move.offset, max - current_position[axis]);
     #else
       current_position[axis] += diff;
       if (int32_t(ui.encoderPosition) < 0)
@@ -120,16 +105,16 @@ static void _lcd_move_xyz(PGM_P const name, const AxisEnum axis) {
         NOMORE(current_position[axis], max);
     #endif
 
-    manual_move_to_current(axis);
+    ui.manual_move.soon(axis);
     ui.refresh(LCDVIEW_REDRAW_NOW);
   }
   ui.encoderPosition = 0;
   if (ui.should_draw()) {
     const float pos = NATIVE_TO_LOGICAL(
-      ui.processing_manual_move ? destination[axis] : current_position[axis] + TERN0(IS_KINEMATIC, ui.manual_move_offset),
+      ui.manual_move.processing ? destination[axis] : current_position[axis] + TERN0(IS_KINEMATIC, ui.manual_move.offset),
       axis
     );
-    MenuEditItemBase::draw_edit_screen(name, move_menu_scale >= 0.1f ? ftostr41sign(pos) : ftostr43sign(pos));
+    MenuEditItemBase::draw_edit_screen(name, ui.manual_move.menu_scale >= 0.1f ? ftostr41sign(pos) : ftostr43sign(pos));
   }
 }
 void lcd_move_x() { _lcd_move_xyz(GET_TEXT(MSG_MOVE_X), X_AXIS); }
@@ -141,10 +126,10 @@ void lcd_move_z() { _lcd_move_xyz(GET_TEXT(MSG_MOVE_Z), Z_AXIS); }
   static void lcd_move_e(TERN_(MULTI_MANUAL, const int8_t eindex=-1)) {
     if (ui.use_click()) return ui.goto_previous_screen_no_defer();
     if (ui.encoderPosition) {
-      if (!ui.processing_manual_move) {
-        const float diff = float(int32_t(ui.encoderPosition)) * move_menu_scale;
-        TERN(IS_KINEMATIC, ui.manual_move_offset, current_position.e) += diff;
-        manual_move_to_current(E_AXIS
+      if (!ui.manual_move.processing) {
+        const float diff = float(int32_t(ui.encoderPosition)) * ui.manual_move.menu_scale;
+        TERN(IS_KINEMATIC, ui.manual_move.offset, current_position.e) += diff;
+        ui.manual_move.soon(E_AXIS
           #if MULTI_MANUAL
             , eindex
           #endif
@@ -160,7 +145,7 @@ void lcd_move_z() { _lcd_move_xyz(GET_TEXT(MSG_MOVE_Z), Z_AXIS); }
       MenuEditItemBase::draw_edit_screen(
         GET_TEXT(TERN(MULTI_MANUAL, MSG_MOVE_EN, MSG_MOVE_E)),
         ftostr41sign(current_position.e
-          + TERN0(IS_KINEMATIC, ui.manual_move_offset)
+          + TERN0(IS_KINEMATIC, ui.manual_move.offset)
           - TERN0(MANUAL_E_MOVES_RELATIVE, manual_move_e_origin)
         )
       );
@@ -181,7 +166,7 @@ screenFunc_t _manual_move_func_ptr;
 
 void _goto_manual_move(const float scale) {
   ui.defer_status_screen();
-  move_menu_scale = scale;
+  ui.manual_move.menu_scale = scale;
   ui.goto_screen(_manual_move_func_ptr);
 }
 
diff --git a/Marlin/src/lcd/menu/menu_ubl.cpp b/Marlin/src/lcd/menu/menu_ubl.cpp
index 58cf13a11c..3722b53cb9 100644
--- a/Marlin/src/lcd/menu/menu_ubl.cpp
+++ b/Marlin/src/lcd/menu/menu_ubl.cpp
@@ -49,46 +49,36 @@ static int8_t x_plot = 0, y_plot = 0; // May be negative during move
   static int16_t custom_bed_temp = 50;
 #endif
 
-float mesh_edit_value, mesh_edit_accumulator; // We round mesh_edit_value to 2.5 decimal places. So we keep a
-                                              // separate value that doesn't lose precision.
-static int16_t ubl_encoderPosition = 0;
+float mesh_edit_accumulator;  // Rounded to 2.5 decimal places on use
+
+inline float rounded_mesh_value() {
+  const int32_t rounded = int32_t(mesh_edit_accumulator * 1000);
+  return float(rounded - (rounded % 5L)) / 1000;
+}
 
 static void _lcd_mesh_fine_tune(PGM_P const msg) {
   ui.defer_status_screen();
   if (ubl.encoder_diff) {
-    ubl_encoderPosition = (ubl.encoder_diff > 0) ? 1 : -1;
+    mesh_edit_accumulator += ubl.encoder_diff > 0 ? 0.005f : -0.005f;
     ubl.encoder_diff = 0;
-
-    mesh_edit_accumulator += float(ubl_encoderPosition) * 0.005f * 0.5f;
-    mesh_edit_value = mesh_edit_accumulator;
-    ui.encoderPosition = 0;
     ui.refresh(LCDVIEW_CALL_REDRAW_NEXT);
-
-    const int32_t rounded = (int32_t)(mesh_edit_value * 1000);
-    mesh_edit_value = float(rounded - (rounded % 5L)) / 1000;
   }
 
   if (ui.should_draw()) {
-    MenuEditItemBase::draw_edit_screen(msg, ftostr43sign(mesh_edit_value));
-    TERN_(MESH_EDIT_GFX_OVERLAY, _lcd_zoffset_overlay_gfx(mesh_edit_value));
+    const float rounded_f = rounded_mesh_value();
+    MenuEditItemBase::draw_edit_screen(msg, ftostr43sign(rounded_f));
+    TERN_(MESH_EDIT_GFX_OVERLAY, _lcd_zoffset_overlay_gfx(rounded_f));
   }
 }
 
-void lcd_limbo() {
-  ui.currentScreen = []{};
-  ui.defer_status_screen();
-}
-
-float lcd_mesh_edit() {
-  lcd_limbo();
-  ui.refresh(LCDVIEW_CALL_REDRAW_NEXT);
-  _lcd_mesh_fine_tune(GET_TEXT(MSG_MESH_EDITOR));
-  return mesh_edit_value;
-}
+//
+// Called external to the menu system to acquire the result of an edit.
+//
+float lcd_mesh_edit() { return rounded_mesh_value(); }
 
 void lcd_mesh_edit_setup(const float &initial) {
-  mesh_edit_value = mesh_edit_accumulator = initial;
-  lcd_limbo();
+  mesh_edit_accumulator = initial;
+  ui.goto_screen([]{ _lcd_mesh_fine_tune(GET_TEXT(MSG_MESH_EDIT_Z)); });
 }
 
 void _lcd_z_offset_edit() {
@@ -97,11 +87,11 @@ void _lcd_z_offset_edit() {
 
 float lcd_z_offset_edit() {
   ui.goto_screen(_lcd_z_offset_edit);
-  return mesh_edit_value;
+  return rounded_mesh_value();
 }
 
 void lcd_z_offset_edit_setup(const float &initial) {
-  mesh_edit_value = mesh_edit_accumulator = initial;
+  mesh_edit_accumulator = initial;
   ui.goto_screen(_lcd_z_offset_edit);
 }
 
@@ -390,24 +380,10 @@ void _lcd_ubl_storage_mesh() {
   END_MENU();
 }
 
-/**
- * UBL LCD "radar" map homing
- */
-void _lcd_ubl_output_map_lcd();
-
-void _lcd_ubl_map_homing() {
-  ui.defer_status_screen();
-  _lcd_draw_homing();
-  if (all_axes_homed()) {
-    ubl.lcd_map_control = true; // Return to the map screen
-    ui.goto_screen(_lcd_ubl_output_map_lcd);
-  }
-}
-
 /**
  * UBL LCD "radar" map point editing
  */
-void _lcd_ubl_map_lcd_edit_cmd() {
+void _lcd_ubl_map_edit_cmd() {
   char ubl_lcd_gcode[50], str[10], str2[10];
   dtostrf(ubl.mesh_index_to_xpos(x_plot), 0, 2, str);
   dtostrf(ubl.mesh_index_to_ypos(y_plot), 0, 2, str2);
@@ -419,85 +395,122 @@ void _lcd_ubl_map_lcd_edit_cmd() {
  * UBL LCD Map Movement
  */
 void ubl_map_move_to_xy() {
-  const feedRate_t fr_mm_s = MMM_TO_MMS(XY_PROBE_SPEED);
-
-  destination = current_position;          // sync destination at the start
 
   #if ENABLED(DELTA)
-    if (current_position.z > delta_clip_start_height) {
+    if (current_position.z > delta_clip_start_height) { // Make sure the delta has fully free motion
+      destination = current_position;
       destination.z = delta_clip_start_height;
-      prepare_internal_move_to_destination(fr_mm_s);
+      prepare_internal_fast_move_to_destination(homing_feedrate(Z_AXIS)); // Set current_position from destination
     }
   #endif
 
-  destination.set(ubl.mesh_index_to_xpos(x_plot), ubl.mesh_index_to_ypos(y_plot));
-  prepare_internal_move_to_destination(fr_mm_s);
+  // Set the nozzle position to the mesh point
+  current_position.set(ubl.mesh_index_to_xpos(x_plot), ubl.mesh_index_to_ypos(y_plot));
+
+  // Use the built-in manual move handler
+  ui.manual_move.soon(ALL_AXES);
+}
+
+inline int32_t grid_index(const uint8_t x, const uint8_t y) {
+  return (GRID_MAX_POINTS_X) * y + x;
 }
 
 /**
  * UBL LCD "radar" map
  */
-void _lcd_ubl_output_map_lcd() {
+void ubl_map_screen() {
+  // static millis_t next_move = 0;
+  // const millis_t ms = millis();
 
-  static int16_t step_scaler = 0;
+  uint8_t x, y;
 
-  if (ui.use_click()) return _lcd_ubl_map_lcd_edit_cmd();
+  if (ui.first_page) {
 
-  if (ui.encoderPosition) {
-    step_scaler += int32_t(ui.encoderPosition);
-    x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM);
-    ui.encoderPosition = 0;
-    ui.refresh(LCDVIEW_REDRAW_NOW);
-  }
+    // On click send "G29 P4 ..." to edit the Z value
+    if (ui.use_click()) {
+      _lcd_ubl_map_edit_cmd();
+      return;
+    }
 
-  #define KEEP_LOOPING ENABLED(IS_KINEMATIC) // Loop until a valid point is found
+    ui.defer_status_screen();
+
+    #if IS_KINEMATIC
+      // Index of the mesh point upon entry
+      const uint32_t old_pos_index = grid_index(x_plot, y_plot);
+      // Direction from new (unconstrained) encoder value
+      const int8_t step_dir = int32_t(ui.encoderPosition) < old_pos_index ? -1 : 1;
+    #endif
 
-  do {
-    // Encoder to the right (++)
-    if (x_plot >= GRID_MAX_POINTS_X) { x_plot = 0; y_plot++; }
-    if (y_plot >= GRID_MAX_POINTS_Y) y_plot = 0;
+    do {
+      // Now, keep the encoder position within range
+      if (int32_t(ui.encoderPosition) < 0) ui.encoderPosition = GRID_MAX_POINTS - 1;
+      if (int32_t(ui.encoderPosition) > GRID_MAX_POINTS - 1) ui.encoderPosition = 0;
 
-    // Encoder to the left (--)
-    if (x_plot < 0) { x_plot = GRID_MAX_POINTS_X - 1; y_plot--; }
-    if (y_plot < 0) y_plot = GRID_MAX_POINTS_Y - 1;
+      // Draw the grid point based on the encoder
+      x = ui.encoderPosition % (GRID_MAX_POINTS_X);
+      y = ui.encoderPosition / (GRID_MAX_POINTS_X);
 
+      // Validate if needed
+      #if IS_KINEMATIC
+        const xy_pos_t xy = { ubl.mesh_index_to_xpos(x), ubl.mesh_index_to_ypos(y) };
+        if (position_is_reachable(xy)) break; // Found a valid point
+        ui.encoderPosition += step_dir;       // Test the next point
+      #endif
+    } while(ENABLED(IS_KINEMATIC));
+
+    // Determine number of points to edit
     #if IS_KINEMATIC
-      const xy_pos_t xy = { ubl.mesh_index_to_xpos(x_plot), ubl.mesh_index_to_ypos(y_plot) };
-      if (position_is_reachable(xy)) break; // Found a valid point
-      x_plot += (step_scaler < 0) ? -1 : 1;
+      n_edit_pts = 9; // TODO: Delta accessible edit points
+    #else
+      const bool xc = WITHIN(x, 1, GRID_MAX_POINTS_X - 2),
+                 yc = WITHIN(y, 1, GRID_MAX_POINTS_Y - 2);
+      n_edit_pts = yc ? (xc ? 9 : 6) : (xc ? 6 : 4); // Corners
     #endif
 
-  } while(KEEP_LOOPING);
+    // Refresh is also set by encoder movement
+    //if (int32_t(ui.encoderPosition) != grid_index(x, y))
+    //  ui.refresh(LCDVIEW_CALL_REDRAW_NEXT);
+  }
 
-  // Determine number of points to edit
-  #if IS_KINEMATIC
-    n_edit_pts = 9; //TODO: Delta accessible edit points
-  #else
-    const bool xc = WITHIN(x_plot, 1, GRID_MAX_POINTS_X - 2),
-               yc = WITHIN(y_plot, 1, GRID_MAX_POINTS_Y - 2);
-    n_edit_pts = yc ? (xc ? 9 : 6) : (xc ? 6 : 4); // Corners
-  #endif
+  // Draw the grid point based on the encoder
+  x = ui.encoderPosition % (GRID_MAX_POINTS_X);
+  y = ui.encoderPosition / (GRID_MAX_POINTS_X);
 
-  // Cleanup
-  if (ABS(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0;
+  if (ui.should_draw()) ui.ubl_plot(x, y);
 
-  if (ui.should_draw()) {
-    ui.ubl_plot(x_plot, y_plot);
-    if (!planner.movesplanned())
-      ubl_map_move_to_xy();       // Move to new location
+  // Add a move if needed to match the grid point
+  if (x != x_plot || y != y_plot) {
+    x_plot = x; y_plot = y;   // The move is always posted, so update the grid point now
+    ubl_map_move_to_xy();     // Sets up a "manual move"
+    ui.refresh(LCDVIEW_CALL_REDRAW_NEXT); // Clean up a half drawn box
+  }
+}
+
+/**
+ * UBL LCD "radar" map homing
+ */
+void _ubl_map_screen_homing() {
+  ui.defer_status_screen();
+  _lcd_draw_homing();
+  if (all_axes_homed()) {
+    ubl.lcd_map_control = true;     // Return to the map screen after editing Z
+    ui.goto_screen(ubl_map_screen, grid_index(x_plot, y_plot)); // Pre-set the encoder value
+    ui.manual_move.menu_scale = 0;  // Immediate move
+    ubl_map_move_to_xy();           // Move to current mesh point
+    ui.manual_move.menu_scale = 1;  // Delayed moves
   }
 }
 
 /**
  * UBL Homing before LCD map
  */
-void _lcd_ubl_output_map_lcd_cmd() {
+void _ubl_goto_map_screen() {
+  if (planner.movesplanned()) return;     // The ACTION_ITEM will do nothing
   if (!all_axes_known()) {
     set_all_unhomed();
     queue.inject_P(G28_STR);
   }
-  if (planner.movesplanned()) return;
-  ui.goto_screen(_lcd_ubl_map_homing);
+  ui.goto_screen(_ubl_map_screen_homing); // Go to the "Homing" screen
 }
 
 /**
@@ -591,7 +604,7 @@ void _lcd_ubl_level_bed() {
   #if ENABLED(G26_MESH_VALIDATION)
     SUBMENU(MSG_UBL_STEP_BY_STEP_MENU, _lcd_ubl_step_by_step);
   #endif
-  ACTION_ITEM(MSG_UBL_MESH_EDIT, _lcd_ubl_output_map_lcd_cmd);
+  ACTION_ITEM(MSG_UBL_MESH_EDIT, _ubl_goto_map_screen);
   SUBMENU(MSG_UBL_STORAGE_MESH_MENU, _lcd_ubl_storage_mesh);
   SUBMENU(MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map);
   SUBMENU(MSG_UBL_TOOLS, _menu_ubl_tools);
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 74924e1dd1..d2033018a6 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -211,7 +211,6 @@ millis_t MarlinUI::next_button_update_ms; // = 0
   #endif
 
   bool MarlinUI::lcd_clicked;
-  float move_menu_scale;
 
   bool MarlinUI::use_click() {
     const bool click = lcd_clicked;
@@ -388,7 +387,7 @@ bool MarlinUI::get_blink() {
     void lcd_move_z();
 
     void _reprapworld_keypad_move(const AxisEnum axis, const int16_t dir) {
-      move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
+      ui.manual_move.menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
       ui.encoderPosition = dir;
       switch (axis) {
         case X_AXIS: lcd_move_x(); break;
@@ -637,51 +636,65 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
 
 #if HAS_LCD_MENU
 
-  int8_t MarlinUI::manual_move_axis = (int8_t)NO_AXIS;
-  millis_t MarlinUI::manual_move_start_time = 0;
+  ManualMove MarlinUI::manual_move{};
 
-  #if IS_KINEMATIC
-    bool MarlinUI::processing_manual_move = false;
-    float MarlinUI::manual_move_offset = 0;
-  #endif
-
-  #if MULTI_MANUAL
-    int8_t MarlinUI::manual_move_e_index = 0;
-  #endif
+  millis_t ManualMove::start_time = 0;
+  float ManualMove::menu_scale = 1;
+  TERN_(IS_KINEMATIC, float ManualMove::offset = 0);
+  TERN_(IS_KINEMATIC, bool ManualMove::processing = false);
+  TERN_(MULTI_MANUAL, int8_t ManualMove::e_index = 0);
+  uint8_t ManualMove::axis = (uint8_t)NO_AXIS;
 
   /**
-   * If the most recent manual move hasn't been fed to the planner yet,
-   * and the planner can accept one, send a move immediately.
+   * If a manual move has been posted and its time has arrived, and if the planner
+   * has a space for it, then add a linear move to current_position the planner.
+   *
+   * If any manual move needs to be interrupted, make sure to force a manual move
+   * by setting manual_move.start_time to millis() after updating current_position.
+   *
+   * To post a manual move:
+   *   - Update current_position to the new place you want to go.
+   *   - Set manual_move.axis to an axis like X_AXIS. Use ALL_AXES for diagonal moves.
+   *   - Set manual_move.start_time to a point in the future (in ms) when the move should be done.
+   *
+   * For kinematic machines:
+   *   - Set manual_move.offset to modify one axis and post the move.
+   *     This is used to achieve more rapid stepping on kinematic machines.
+   *
+   * Currently used by the _lcd_move_xyz function in menu_motion.cpp
+   * and the ubl_map_move_to_xy funtion in menu_ubl.cpp.
    */
-  void MarlinUI::manage_manual_move() {
+  void ManualMove::task() {
 
-    if (processing_manual_move) return;
+    if (processing) return;   // Prevent re-entry from idle() calls
 
-    if (manual_move_axis != (int8_t)NO_AXIS && ELAPSED(millis(), manual_move_start_time) && !planner.is_full()) {
+    // Add a manual move to the queue?
+    if (axis != (uint8_t)NO_AXIS && ELAPSED(millis(), start_time) && !planner.is_full()) {
+
+      const feedRate_t fr_mm_s = (uint8_t(axis) <= E_AXIS) ? manual_feedrate_mm_s[axis] : XY_PROBE_FEEDRATE_MM_S;
 
-      const feedRate_t fr_mm_s = manual_feedrate_mm_s[manual_move_axis];
       #if IS_KINEMATIC
 
         #if EXTRUDERS > 1
           const int8_t old_extruder = active_extruder;
-          if (manual_move_axis == E_AXIS) active_extruder = manual_move_e_index;
+          if (axis == E_AXIS) active_extruder = e_index;
         #endif
 
-        // Set movement on a single axis
+        // Apply a linear offset to a single axis
         destination = current_position;
-        destination[manual_move_axis] += manual_move_offset;
+        if (axis <= XYZE) destination[axis] += offset;
 
         // Reset for the next move
-        manual_move_offset = 0;
-        manual_move_axis = (int8_t)NO_AXIS;
+        offset = 0;
+        axis = (uint8_t)NO_AXIS;
 
         // DELTA and SCARA machines use segmented moves, which could fill the planner during the call to
         // move_to_destination. This will cause idle() to be called, which can then call this function while the
-        // previous invocation is being blocked. Modifications to manual_move_offset shouldn't be made while
-        // processing_manual_move is true or the planner will get out of sync.
-        processing_manual_move = true;
+        // previous invocation is being blocked. Modifications to offset shouldn't be made while
+        // processing is true or the planner will get out of sync.
+        processing = true;
         prepare_internal_move_to_destination(fr_mm_s);  // will set current_position from destination
-        processing_manual_move = false;
+        processing = false;
 
         #if EXTRUDERS > 1
           active_extruder = old_extruder;
@@ -689,15 +702,47 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
 
       #else
 
-        planner.buffer_line(current_position, fr_mm_s, manual_move_axis == E_AXIS ? manual_move_e_index : active_extruder);
-        manual_move_axis = (int8_t)NO_AXIS;
+        // For Cartesian / Core motion simply move to the current_position
+        planner.buffer_line(current_position, fr_mm_s, axis == E_AXIS ? e_index : active_extruder);
+
+        //SERIAL_ECHOLNPAIR("Add planner.move with Axis ", int(axis), " at FR ", fr_mm_s);
+
+        axis = (uint8_t)NO_AXIS;
 
       #endif
     }
   }
 
+  //
+  // Tell ui.update() to start a move to current_position after a short delay.
+  //
+  void ManualMove::soon(AxisEnum move_axis
+    #if MULTI_MANUAL
+      , const int8_t eindex/*=-1*/
+    #endif
+  ) {
+    #if MULTI_MANUAL
+      if (move_axis == E_AXIS) e_index = eindex >= 0 ? eindex : active_extruder;
+    #endif
+    start_time = millis() + (menu_scale < 0.99f ? 0UL : 250UL); // delay for bigger moves
+    axis = (uint8_t)move_axis;
+    //SERIAL_ECHOLNPAIR("Post Move with Axis ", int(axis), " soon.");
+  }
+
 #endif // HAS_LCD_MENU
 
+#if ENABLED(AUTO_BED_LEVELING_UBL)
+
+  void MarlinUI::external_encoder() {
+    if (external_control && encoderDiff) {
+      ubl.encoder_diff += encoderDiff;  // Encoder for UBL G29 mesh editing
+      encoderDiff = 0;                  // Hide encoder events from the screen handler
+      refresh(LCDVIEW_REDRAW_NOW);      // ...but keep the refresh.
+    }
+  }
+
+#endif
+
 /**
  * Update the LCD, read encoder buttons, etc.
  *   - Read button states
@@ -753,7 +798,7 @@ void MarlinUI::update() {
   #if HAS_LCD_MENU
 
     // Handle any queued Move Axis motion
-    manage_manual_move();
+    manual_move.task();
 
     // Update button states for button_pressed(), etc.
     // If the state changes the next update may be delayed 300-500ms.
@@ -776,7 +821,7 @@ void MarlinUI::update() {
           if (ELAPSED(ms, next_button_update_ms)) {
             encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * (ENCODER_PULSES_PER_STEP) * encoderDirection;
             if (touch_buttons & EN_A) encoderDiff *= -1;
-            TERN_(AUTO_BED_LEVELING_UBL, if (external_control) ubl.encoder_diff = encoderDiff);
+            TERN_(AUTO_BED_LEVELING_UBL, external_encoder());
             next_button_update_ms = ms + repeat_delay;    // Assume the repeat delay
             if (!wait_for_unclick) {
               next_button_update_ms += 250;               // Longer delay on first press
@@ -1196,10 +1241,7 @@ void MarlinUI::update() {
           case encrot2: ENCODER_SPIN(encrot1, encrot3); break;
           case encrot3: ENCODER_SPIN(encrot2, encrot0); break;
         }
-        if (external_control) {
-          TERN_(AUTO_BED_LEVELING_UBL, ubl.encoder_diff = encoderDiff); // Make encoder rotation available to UBL G29 mesh editing.
-          encoderDiff = 0;                    // Hide the encoder event from the current screen handler.
-        }
+        TERN_(AUTO_BED_LEVELING_UBL, external_encoder());
         lastEncoderBits = enc;
       }
 
diff --git a/Marlin/src/lcd/ultralcd.h b/Marlin/src/lcd/ultralcd.h
index 7641643409..6ebd43a37d 100644
--- a/Marlin/src/lcd/ultralcd.h
+++ b/Marlin/src/lcd/ultralcd.h
@@ -99,9 +99,6 @@
     typedef void (*screenFunc_t)();
     typedef void (*menuAction_t)();
 
-    // Manual Movement
-    extern float move_menu_scale;
-
     #if ENABLED(ADVANCED_PAUSE_FEATURE)
       void lcd_pause_show_message(const PauseMessage message,
                                   const PauseMode mode=PAUSE_MODE_SAME,
@@ -264,6 +261,35 @@
   } preheat_t;
 #endif
 
+#if HAS_LCD_MENU
+
+  // Manual Movement class
+  class ManualMove {
+  public:
+    static millis_t start_time;
+    static float menu_scale;
+    TERN_(IS_KINEMATIC, static float offset);
+    #if IS_KINEMATIC
+      static bool processing;
+    #else
+      static bool constexpr processing = false;
+    #endif
+    #if MULTI_MANUAL
+      static int8_t e_index;
+    #else
+      static int8_t constexpr e_index = 0;
+    #endif
+    static uint8_t axis;
+    static void task();
+    static void soon(AxisEnum axis
+      #if MULTI_MANUAL
+        , const int8_t eindex=-1
+      #endif
+    );
+  };
+
+#endif
+
 ////////////////////////////////////////////
 //////////// MarlinUI Singleton ////////////
 ////////////////////////////////////////////
@@ -494,29 +520,14 @@ public:
       static void enable_encoder_multiplier(const bool onoff);
     #endif
 
-    static int8_t manual_move_axis;
-    static millis_t manual_move_start_time;
-
-    #if IS_KINEMATIC
-      static float manual_move_offset;
-      static bool processing_manual_move;
-    #else
-      static constexpr bool processing_manual_move = false;
-    #endif
-
-    #if E_MANUAL > 1
-      static int8_t manual_move_e_index;
-    #else
-      static constexpr int8_t manual_move_e_index = 0;
-    #endif
+    // Manual Movement
+    static ManualMove manual_move;
 
     // Select Screen (modal NO/YES style dialog)
     static bool selection;
     static void set_selection(const bool sel) { selection = sel; }
     static bool update_selection();
 
-    static void manage_manual_move();
-
     static bool lcd_clicked;
     static bool use_click();
 
@@ -609,6 +620,9 @@ public:
     static bool external_control;
     FORCE_INLINE static void capture() { external_control = true; }
     FORCE_INLINE static void release() { external_control = false; }
+    #if ENABLED(AUTO_BED_LEVELING_UBL)
+      static void external_encoder();
+    #endif
   #else
     static constexpr bool external_control = false;
   #endif
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index 7fba6f8ea3..1994280a2c 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -1316,16 +1316,18 @@ void do_homing_move(const AxisEnum axis, const float distance, const feedRate_t
     current_position[axis] = distance;
     line_to_current_position(real_fr_mm_s);
   #else
+    // Get the ABC or XYZ positions in mm
     abce_pos_t target = planner.get_axis_positions_mm();
-    target[axis] = 0;
-    planner.set_machine_position_mm(target);
-    target[axis] = distance;
+
+    target[axis] = 0;                         // Set the single homing axis to 0
+    planner.set_machine_position_mm(target);  // Update the machine position
 
     #if HAS_DIST_MM_ARG
       const xyze_float_t cart_dist_mm{0};
     #endif
 
     // Set delta/cartesian axes directly
+    target[axis] = distance;                  // The move will be towards the endstop
     planner.buffer_segment(target
       #if HAS_DIST_MM_ARG
         , cart_dist_mm
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index 1beb63c1a4..8352c2b3a6 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -1654,7 +1654,7 @@ void Planner::synchronize() {
  *  extruder      - target extruder
  *  millimeters   - the length of the movement, if known
  *
- * Returns true if movement was properly queued, false otherwise
+ * Returns true if movement was properly queued, false otherwise (if cleaning)
  */
 bool Planner::_buffer_steps(const xyze_long_t &target
   #if HAS_POSITION_FLOAT
@@ -2637,6 +2637,8 @@ void Planner::buffer_sync_block() {
  *  fr_mm_s     - (target) speed of the move
  *  extruder    - target extruder
  *  millimeters - the length of the movement, if known
+ *
+ * Return 'false' if no segment was queued due to cleaning, cold extrusion, full queue, etc.
  */
 bool Planner::buffer_segment(const float &a, const float &b, const float &c, const float &e
   #if HAS_DIST_MM_ARG
@@ -2706,7 +2708,7 @@ bool Planner::buffer_segment(const float &a, const float &b, const float &c, con
     SERIAL_ECHOLNPGM(")");
   //*/
 
-  // Queue the movement
+  // Queue the movement. Return 'false' if the move was not queued.
   if (!_buffer_steps(target
       #if HAS_POSITION_FLOAT
         , target_float