diff --git a/Marlin/src/HAL/HAL_AVR/HAL.h b/Marlin/src/HAL/HAL_AVR/HAL.h index fcc87c88b6..2992ebe0e3 100644 --- a/Marlin/src/HAL/HAL_AVR/HAL.h +++ b/Marlin/src/HAL/HAL_AVR/HAL.h @@ -16,9 +16,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - -#ifndef _HAL_AVR_H_ -#define _HAL_AVR_H_ +#pragma once // -------------------------------------------------------------------------- // Includes @@ -374,5 +372,3 @@ inline void HAL_adc_init(void) { // AVR compatibility #define strtof strtod - -#endif // _HAL_AVR_H_ diff --git a/Marlin/src/HAL/HAL_AVR/MarlinSerial.h b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h index 459c552f3c..132097eb49 100644 --- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.h +++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * MarlinSerial.h - Hardware serial library for Wiring @@ -30,9 +31,6 @@ * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances */ -#ifndef _MARLINSERIAL_H_ -#define _MARLINSERIAL_H_ - #include "../shared/MarlinSerial.h" #include @@ -281,5 +279,3 @@ #if defined(USBCON) && ENABLED(BLUETOOTH) extern HardwareSerial bluetoothSerial; #endif - -#endif // _MARLINSERIAL_H_ diff --git a/Marlin/src/HAL/HAL_AVR/SanityCheck.h b/Marlin/src/HAL/HAL_AVR/SanityCheck.h index a61472cc44..5b15bca082 100644 --- a/Marlin/src/HAL/HAL_AVR/SanityCheck.h +++ b/Marlin/src/HAL/HAL_AVR/SanityCheck.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _SANITYCHECK_AVR_8_BIT_H_ -#define _SANITYCHECK_AVR_8_BIT_H_ +#pragma once /** * Test AVR specific configuration values for errors at compile-time. @@ -116,5 +114,3 @@ || defined(E4_HARDWARE_SERIAL) ) #error "Select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE." #endif - -#endif // _SANITYCHECK_AVR_8_BIT_H_ diff --git a/Marlin/src/HAL/HAL_AVR/ServoTimers.h b/Marlin/src/HAL/HAL_AVR/ServoTimers.h index 4af997f1ef..c7c4587adc 100644 --- a/Marlin/src/HAL/HAL_AVR/ServoTimers.h +++ b/Marlin/src/HAL/HAL_AVR/ServoTimers.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * ServoTimers.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 @@ -39,9 +40,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef _SERVOTIMERS_H_ -#define _SERVOTIMERS_H_ - /** * Defines for 16 bit timers used with Servo library * @@ -91,5 +89,3 @@ typedef enum { #endif _Nbr_16timers } timer16_Sequence_t; - -#endif // _SERVOTIMERS_H_ diff --git a/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h b/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h index 3eea650b15..791c9812af 100644 --- a/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Endstop Interrupts @@ -35,9 +36,6 @@ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino) */ -#ifndef _ENDSTOP_INTERRUPTS_H_ -#define _ENDSTOP_INTERRUPTS_H_ - #include "../../core/macros.h" #include #include "../../module/endstops.h" @@ -256,5 +254,3 @@ void setup_endstop_interrupts( void ) { // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI. } - -#endif // _ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_AVR/fastio_1280.h b/Marlin/src/HAL/HAL_AVR/fastio_1280.h index 1c65f2bde7..601c515f7f 100644 --- a/Marlin/src/HAL/HAL_AVR/fastio_1280.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_1280.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Pin mapping for the 1280 and 2560 @@ -28,9 +29,6 @@ * Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx */ -#ifndef _FASTIO_1280_H_ -#define _FASTIO_1280_H_ - #include "fastio_AVR.h" // change for your board @@ -1111,5 +1109,3 @@ #define PL7_WPORT PORTL #define PL7_DDR DDRL #define PL7_PWM NULL - -#endif // _FASTIO_1280_H_ diff --git a/Marlin/src/HAL/HAL_AVR/fastio_1281.h b/Marlin/src/HAL/HAL_AVR/fastio_1281.h index 94ab6b7553..274bc6285b 100644 --- a/Marlin/src/HAL/HAL_AVR/fastio_1281.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_1281.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Pin mapping for the 1281 and 2561 @@ -27,9 +28,6 @@ * Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5 */ -#ifndef _FASTIO_1281_H_ -#define _FASTIO_1281_H_ - #include "fastio_AVR.h" // change for your board @@ -715,5 +713,3 @@ #define PG5_WPORT PORTG #define PG5_DDR DDRG #define PG5_PWM &OCR0B - -#endif // _FASTIO_1281_H_ diff --git a/Marlin/src/HAL/HAL_AVR/fastio_168.h b/Marlin/src/HAL/HAL_AVR/fastio_168.h index 33492d15dc..36187bc698 100644 --- a/Marlin/src/HAL/HAL_AVR/fastio_168.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_168.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Pin mapping for the 168, 328, and 328P @@ -27,9 +28,6 @@ * Port: B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 */ -#ifndef _FASTIO_168_H_ -#define _FASTIO_168_H_ - #include "fastio_AVR.h" #define DEBUG_LED AIO5 @@ -357,5 +355,3 @@ #define PD7_WPORT PORTD #define PD7_DDR DDRD #define PD7_PWM NULL - -#endif // _FASTIO_168_H_ diff --git a/Marlin/src/HAL/HAL_AVR/fastio_644.h b/Marlin/src/HAL/HAL_AVR/fastio_644.h index 171172023b..1ad7573801 100644 --- a/Marlin/src/HAL/HAL_AVR/fastio_644.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_644.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Pin mapping for the 644, 644p, 644pa, and 1284p @@ -53,9 +54,6 @@ * +--------+ */ -#ifndef _FASTIO_644_H_ -#define _FASTIO_644_H_ - #include "fastio_AVR.h" #define DEBUG_LED DIO0 @@ -552,5 +550,3 @@ #define PD7_WPORT PORTD #define PD7_DDR DDRD #define PD7_PWM OCR2A - -#endif // _FASTIO_644_H_ diff --git a/Marlin/src/HAL/HAL_AVR/fastio_AT90USB.h b/Marlin/src/HAL/HAL_AVR/fastio_AT90USB.h index 6043292960..70cfcf39b7 100644 --- a/Marlin/src/HAL/HAL_AVR/fastio_AT90USB.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_AT90USB.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Pin mapping (Teensy) for AT90USB646, 647, 1286, and 1287 @@ -28,9 +29,6 @@ * The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3 */ -#ifndef _FASTIO_AT90USB_H_ -#define _FASTIO_AT90USB_H_ - #include "fastio_AVR.h" // change for your board @@ -697,5 +695,3 @@ #define TIMER3A 5 #define TIMER3B 4 #define TIMER3C 3 - -#endif // _FASTIO_AT90USB_H_ diff --git a/Marlin/src/HAL/HAL_AVR/fastio_AVR.h b/Marlin/src/HAL/HAL_AVR/fastio_AVR.h index a4e3c5d74d..448438c87e 100644 --- a/Marlin/src/HAL/HAL_AVR/fastio_AVR.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_AVR.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Fast I/O Routines for AVR @@ -26,9 +27,6 @@ * Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al. */ -#ifndef _FASTIO_ARDUINO_H_ -#define _FASTIO_ARDUINO_H_ - #include #include "../../core/macros.h" @@ -312,5 +310,3 @@ enum ClockSource2 : char { // finally - the macro that tells us if a pin is an available hardware PWM #define USEABLE_HARDWARE_PWM(p) (PWM_PINS(p) && !PWM_CHK(p)) - -#endif // _FASTIO_ARDUINO_H_ diff --git a/Marlin/src/HAL/HAL_AVR/math_AVR.h b/Marlin/src/HAL/HAL_AVR/math_AVR.h index 6348ed8bbf..e84e5bb79b 100644 --- a/Marlin/src/HAL/HAL_AVR/math_AVR.h +++ b/Marlin/src/HAL/HAL_AVR/math_AVR.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _MATH_AVR_H_ -#define _MATH_AVR_H_ +#pragma once /** * Optimized math functions for AVR @@ -113,5 +111,3 @@ static FORCE_INLINE uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) { ); return intRes; } - -#endif // _MATH_AVR_H_ diff --git a/Marlin/src/HAL/HAL_AVR/pinsDebug.h b/Marlin/src/HAL/HAL_AVR/pinsDebug.h index ea35f881e5..9c0bebbdd4 100644 --- a/Marlin/src/HAL/HAL_AVR/pinsDebug.h +++ b/Marlin/src/HAL/HAL_AVR/pinsDebug.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * PWM print routines for Atmel 8 bit AVR CPUs */ -#ifndef _PINSDEBUG_AVR_8_BIT_ -#define _PINSDEBUG_AVR_8_BIT_ - #include "../../inc/MarlinConfig.h" #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS @@ -406,5 +404,3 @@ static void pwm_details(uint8_t pin) { #endif #define PRINT_PIN(p) do {sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer);} while (0) - -#endif // _PINSDEBUG_AVR_8_BIT_ diff --git a/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h b/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h index 840e2a22e9..8da9570743 100644 --- a/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h +++ b/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _PINSDEBUG_TEENSYSUINO_H_ -#define _PINSDEBUG_TEENSYSUINO_H_ +#pragma once // // some of the pin mapping functions of the Teensduino extension to the Arduino IDE @@ -111,5 +109,3 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = { // disable the PWMs so we can use it as is // portModeRegister(pin) is OK - -#endif // _PINSDEBUG_TEENSYSUINO_H_ diff --git a/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h b/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h index 5a0f840140..99f83a03a4 100644 --- a/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h +++ b/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h @@ -20,14 +20,12 @@ * along with this program. If not, see . * */ +#pragma once /** * Structures for 2560 family boards that use more than 70 pins */ -#ifndef _PINSDEBUG_PLUS_70_H_ -#define _PINSDEBUG_PLUS_70_H_ - #undef NUM_DIGITAL_PINS #if MB(BQ_ZUM_MEGA_3D) #define NUM_DIGITAL_PINS 85 @@ -336,6 +334,3 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM_plus_70[] = { * PCINT14 J5 76 * PCINT15 J6 77 */ - - -#endif // _PINSDEBUG_PLUS_70_H_ diff --git a/Marlin/src/HAL/HAL_AVR/spi_pins.h b/Marlin/src/HAL/HAL_AVR/spi_pins.h index d4838956e7..d3d2412416 100644 --- a/Marlin/src/HAL/HAL_AVR/spi_pins.h +++ b/Marlin/src/HAL/HAL_AVR/spi_pins.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _SPI_PINS_H_ -#define _SPI_PINS_H_ +#pragma once /** * Define SPI Pins: SCK, MISO, MOSI, SS @@ -65,6 +63,3 @@ #ifndef SS_PIN #define SS_PIN AVR_SS_PIN #endif - - -#endif // _SPI_PINS_H_ diff --git a/Marlin/src/HAL/HAL_AVR/watchdog_AVR.h b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.h index 90c6185cb6..ac55c9aebd 100644 --- a/Marlin/src/HAL/HAL_AVR/watchdog_AVR.h +++ b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _WATCHDOG_AVR_H_ -#define _WATCHDOG_AVR_H_ +#pragma once #include @@ -31,5 +29,3 @@ void watchdog_init(); // Reset watchdog. MUST be called at least every 4 seconds after the // first watchdog_init or AVR will go into emergency procedures. inline void watchdog_reset() { wdt_reset(); } - -#endif // _WATCHDOG_AVR_H_ diff --git a/Marlin/src/HAL/HAL_DUE/HAL.h b/Marlin/src/HAL/HAL_DUE/HAL.h index 6c872026dc..57d3160ca4 100644 --- a/Marlin/src/HAL/HAL_DUE/HAL.h +++ b/Marlin/src/HAL/HAL_DUE/HAL.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Description: HAL for Arduino Due and compatible (SAM3X8E) @@ -26,9 +27,6 @@ * For ARDUINO_ARCH_SAM */ -#ifndef _HAL_DUE_H -#define _HAL_DUE_H - #define CPU_32_BIT #include @@ -189,5 +187,3 @@ char *dtostrf (double __val, signed char __width, unsigned char __prec, char *__ #ifdef __cplusplus } #endif - -#endif // _HAL_DUE_H diff --git a/Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h b/Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h index dd342f5471..46b7aaf5a4 100644 --- a/Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h +++ b/Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h @@ -18,6 +18,7 @@ * along with this program. If not, see . * */ +#pragma once /** * HAL for Arduino Due and compatible (SAM3X8E) @@ -25,9 +26,6 @@ * For ARDUINO_ARCH_SAM */ -#ifndef _HAL_TIMERS_DUE_H -#define _HAL_TIMERS_DUE_H - // -------------------------------------------------------------------------- // Includes // -------------------------------------------------------------------------- @@ -120,5 +118,3 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) { } #define HAL_timer_isr_epilogue(TIMER_NUM) - -#endif // _HAL_TIMERS_DUE_H diff --git a/Marlin/src/HAL/HAL_DUE/InterruptVectors_Due.h b/Marlin/src/HAL/HAL_DUE/InterruptVectors_Due.h index efc63de25d..a9be8e0b31 100644 --- a/Marlin/src/HAL/HAL_DUE/InterruptVectors_Due.h +++ b/Marlin/src/HAL/HAL_DUE/InterruptVectors_Due.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * InterruptVectors_Due.h @@ -35,11 +36,6 @@ * Copyright (c) 2017 Eduardo José Tagle. All right reserved */ -#ifndef INTERRUPTVECTORS_DUE_H -#define INTERRUPTVECTORS_DUE_H - -#include "../../inc/MarlinConfig.h" - #ifdef ARDUINO_ARCH_SAM // ISR handler type @@ -49,4 +45,3 @@ typedef void (*pfnISR_Handler)(void); pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler); #endif // ARDUINO_ARCH_SAM -#endif // INTERRUPTVECTORS_DUE_H diff --git a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h index 627f3a9616..fbba508506 100644 --- a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h +++ b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h @@ -19,15 +19,13 @@ * along with this program. If not, see . * */ +#pragma once /** * MarlinSerialUSB_Due.h - Hardware Serial over USB (CDC) library for Arduino DUE * Copyright (c) 2017 Eduardo José Tagle. All right reserved */ -#ifndef MARLINSERIALUSB_DUE_H -#define MARLINSERIALUSB_DUE_H - #include "../../inc/MarlinConfig.h" #if SERIAL_PORT == -1 @@ -92,4 +90,3 @@ private: extern MarlinSerialUSB customizedSerial1; #endif // SERIAL_PORT == -1 -#endif // MARLINSERIAL_DUE_H diff --git a/Marlin/src/HAL/HAL_DUE/endstop_interrupts.h b/Marlin/src/HAL/HAL_DUE/endstop_interrupts.h index a5c0df61bf..d026abfea6 100644 --- a/Marlin/src/HAL/HAL_DUE/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_DUE/endstop_interrupts.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Endstop Interrupts @@ -34,9 +35,6 @@ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino) */ -#ifndef _ENDSTOP_INTERRUPTS_H_ -#define _ENDSTOP_INTERRUPTS_H_ - #include "../../module/endstops.h" // One ISR for all EXT-Interrupts @@ -82,5 +80,3 @@ void setup_endstop_interrupts(void) { attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); #endif } - -#endif //_ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_DUE/fastio_Due.h b/Marlin/src/HAL/HAL_DUE/fastio_Due.h index 607e2a05ad..d7a8d33c25 100644 --- a/Marlin/src/HAL/HAL_DUE/fastio_Due.h +++ b/Marlin/src/HAL/HAL_DUE/fastio_Due.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Fast I/O Routines for SAM3X8E @@ -36,9 +37,6 @@ * leads to less efficient compiled code!! */ -#ifndef _FASTIO_DUE_H -#define _FASTIO_DUE_H - #include /** @@ -495,5 +493,3 @@ #define DIO100_PIN 11 #define DIO100_WPORT PIOC #endif - -#endif // _FASTIO_DUE_H diff --git a/Marlin/src/HAL/HAL_DUE/spi_pins.h b/Marlin/src/HAL/HAL_DUE/spi_pins.h index ee80cb3883..8f4f987155 100644 --- a/Marlin/src/HAL/HAL_DUE/spi_pins.h +++ b/Marlin/src/HAL/HAL_DUE/spi_pins.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef SPI_PINS_H_ -#define SPI_PINS_H_ +#pragma once /** * Define SPI Pins: SCK, MISO, MOSI, SS @@ -61,5 +59,3 @@ /* A.28, A.29, B.21, C.26, C.29 */ #define SS_PIN SDSS - -#endif /* SPI_PINS_H_ */ diff --git a/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h b/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h index c1434228cd..7355f74f6d 100644 --- a/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h +++ b/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h @@ -40,15 +40,12 @@ * \asf_license_stop * */ -/* +#pragma once + +/** * Support and FAQ: visit Atmel Support */ -#ifndef ARDUINO_DUE_X_H_INCLUDED -#define ARDUINO_DUE_X_H_INCLUDED - -/* ------------------------------------------------------------------------ */ - /** * \page arduino_due_x_opfreq "Arduino Due/X - Operating frequencies" * This page lists several definition related to the board operating frequency @@ -98,6 +95,3 @@ /*! Active level of the USB_VBOF output pin. */ #define USB_VBOF_ACTIVE_LEVEL LOW /* ------------------------------------------------------------------------ */ - - -#endif /* ARDUINO_DUE_X_H_INCLUDED */ diff --git a/Marlin/src/HAL/HAL_DUE/watchdog_Due.h b/Marlin/src/HAL/HAL_DUE/watchdog_Due.h index 57120309a3..c75875e2ea 100644 --- a/Marlin/src/HAL/HAL_DUE/watchdog_Due.h +++ b/Marlin/src/HAL/HAL_DUE/watchdog_Due.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef WATCHDOG_DUE_H -#define WATCHDOG_DUE_H +#pragma once // Arduino Due core now has watchdog support @@ -33,5 +31,3 @@ void watchdog_init(); // Reset watchdog. MUST be called at least every 4 seconds after the // first watchdog_init or AVR will go into emergency procedures. inline void watchdog_reset() { watchdogReset(); } - -#endif // WATCHDOG_DUE_H diff --git a/Marlin/src/HAL/HAL_ESP32/HAL.h b/Marlin/src/HAL/HAL_ESP32/HAL.h index 7921f9bf5f..a9f9afbffc 100644 --- a/Marlin/src/HAL/HAL_ESP32/HAL.h +++ b/Marlin/src/HAL/HAL_ESP32/HAL.h @@ -16,14 +16,12 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ +#pragma once /** * Description: HAL for Espressif ESP32 WiFi */ -#ifndef _HAL_ESP32_H -#define _HAL_ESP32_H - #define CPU_32_BIT // -------------------------------------------------------------------------- @@ -123,5 +121,3 @@ void HAL_adc_start_conversion (uint8_t adc_pin); #define HAL_INIT 1 void HAL_idletask(void); void HAL_init(void); - -#endif // _HAL_ESP32_H diff --git a/Marlin/src/HAL/HAL_ESP32/HAL_timers_ESP32.h b/Marlin/src/HAL/HAL_ESP32/HAL_timers_ESP32.h index a2d0c0b6db..e8afd83bb8 100644 --- a/Marlin/src/HAL/HAL_ESP32/HAL_timers_ESP32.h +++ b/Marlin/src/HAL/HAL_ESP32/HAL_timers_ESP32.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _HAL_TIMERS_ESP32_H -#define _HAL_TIMERS_ESP32_H +#pragma once // -------------------------------------------------------------------------- // Includes @@ -104,5 +102,3 @@ bool HAL_timer_interrupt_enabled(const uint8_t timer_num); #define HAL_timer_isr_prologue(TIMER_NUM) #define HAL_timer_isr_epilogue(TIMER_NUM) - -#endif // _HAL_TIMERS_ESP32_H diff --git a/Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h b/Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h index bcc32db19a..9a325f30a7 100644 --- a/Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Endstop Interrupts @@ -34,9 +35,6 @@ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino) */ -#ifndef _ENDSTOP_INTERRUPTS_H_ -#define _ENDSTOP_INTERRUPTS_H_ - #include "../../module/endstops.h" // One ISR for all EXT-Interrupts @@ -77,5 +75,3 @@ void setup_endstop_interrupts(void) { attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); #endif } - -#endif //_ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_ESP32/fastio_ESP32.h b/Marlin/src/HAL/HAL_ESP32/fastio_ESP32.h index 5f609c4f0c..8459a151cc 100644 --- a/Marlin/src/HAL/HAL_ESP32/fastio_ESP32.h +++ b/Marlin/src/HAL/HAL_ESP32/fastio_ESP32.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _FASTIO_ESP32_H -#define _FASTIO_ESP32_H +#pragma once /** * Utility functions @@ -64,9 +62,3 @@ // TWI (I2C) #define SCL 5 #define SDA 4 - -// -// pins -// - -#endif // _FASTIO_ESP32_H diff --git a/Marlin/src/HAL/HAL_ESP32/ota.h b/Marlin/src/HAL/HAL_ESP32/ota.h index 4af2a74cab..0fa33b532e 100644 --- a/Marlin/src/HAL/HAL_ESP32/ota.h +++ b/Marlin/src/HAL/HAL_ESP32/ota.h @@ -16,11 +16,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - -#ifndef _HAL_OTA_H -#define _HAL_OTA_H +#pragma once void OTA_init(); void OTA_handle(); - -#endif diff --git a/Marlin/src/HAL/HAL_ESP32/spi_pins.h b/Marlin/src/HAL/HAL_ESP32/spi_pins.h index ecd58b9100..48e20a0442 100644 --- a/Marlin/src/HAL/HAL_ESP32/spi_pins.h +++ b/Marlin/src/HAL/HAL_ESP32/spi_pins.h @@ -16,13 +16,9 @@ * along with this program. If not, see . * */ - -#ifndef SPI_PINS_H_ -#define SPI_PINS_H_ +#pragma once #define SS_PIN 5 #define SCK_PIN 18 #define MISO_PIN 19 #define MOSI_PIN 23 - -#endif // SPI_PINS_H_ diff --git a/Marlin/src/HAL/HAL_ESP32/watchdog_ESP32.h b/Marlin/src/HAL/HAL_ESP32/watchdog_ESP32.h index 39f0287275..df80ebc84c 100644 --- a/Marlin/src/HAL/HAL_ESP32/watchdog_ESP32.h +++ b/Marlin/src/HAL/HAL_ESP32/watchdog_ESP32.h @@ -19,14 +19,10 @@ * along with this program. If not, see . * */ - -#ifndef WATCHDOG_ESP32_H -#define WATCHDOG_ESP32_H +#pragma once // Initialize watchdog with a 4 second interrupt time void watchdog_init(); // Reset watchdog. -inline void watchdog_reset() {}; - -#endif // WATCHDOG_ESP32_H +inline void watchdog_reset() { } diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL.h b/Marlin/src/HAL/HAL_LPC1768/HAL.h index db14170eac..689105f109 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HAL.h +++ b/Marlin/src/HAL/HAL_LPC1768/HAL.h @@ -19,15 +19,13 @@ * along with this program. If not, see . * */ +#pragma once /** * HAL_LPC1768/HAL.h * Hardware Abstraction Layer for NXP LPC1768 */ -#ifndef _HAL_LPC1768_H_ -#define _HAL_LPC1768_H_ - #define CPU_32_BIT #define HAL_INIT @@ -156,5 +154,3 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval); #define HAL_IDLETASK 1 void HAL_idletask(void); - -#endif // _HAL_LPC1768_H_ diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h b/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h index d818589104..360a0f5c21 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h +++ b/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h @@ -18,15 +18,13 @@ * along with this program. If not, see . * */ +#pragma once /** * * HAL For LPC1768 */ -#ifndef _HAL_TIMERS_H -#define _HAL_TIMERS_H - // -------------------------------------------------------------------------- // Includes // -------------------------------------------------------------------------- @@ -166,5 +164,3 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) { } #define HAL_timer_isr_epilogue(TIMER_NUM) - -#endif // _HAL_TIMERS_H diff --git a/Marlin/src/HAL/HAL_LPC1768/MarlinSerial.h b/Marlin/src/HAL/HAL_LPC1768/MarlinSerial.h index 889b278e99..7f95be3569 100644 --- a/Marlin/src/HAL/HAL_LPC1768/MarlinSerial.h +++ b/Marlin/src/HAL/HAL_LPC1768/MarlinSerial.h @@ -19,9 +19,8 @@ * along with this program. If not, see . * */ +#pragma once -#ifndef MARLINSERIAL_H -#define MARLINSERIAL_H #include #include @@ -33,7 +32,6 @@ #ifndef SERIAL_PORT #define SERIAL_PORT 0 #endif - #ifndef RX_BUFFER_SIZE #define RX_BUFFER_SIZE 128 #endif @@ -67,5 +65,3 @@ extern MarlinSerial MSerial; extern MarlinSerial MSerial1; extern MarlinSerial MSerial2; extern MarlinSerial MSerial3; - -#endif // MARLINSERIAL_H diff --git a/Marlin/src/HAL/HAL_LPC1768/MarlinServo.h b/Marlin/src/HAL/HAL_LPC1768/MarlinServo.h index 6a6fae1fb7..c535ea6ff5 100644 --- a/Marlin/src/HAL/HAL_LPC1768/MarlinServo.h +++ b/Marlin/src/HAL/HAL_LPC1768/MarlinServo.h @@ -38,6 +38,7 @@ * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#pragma once /** * Based on "servo.h - Interrupt driven Servo library for Arduino using 16 bit timers - @@ -47,12 +48,9 @@ * */ -#ifndef SERVO_PRIVATE_H -#define SERVO_PRIVATE_H - #include -class MarlinServo: public Servo { +class MarlinServo: public Servo { public: void move(const int value) { constexpr uint16_t servo_delay[] = SERVO_DELAY; @@ -70,5 +68,3 @@ class MarlinServo: public Servo { }; #define HAL_SERVO_LIB MarlinServo - -#endif // SERVO_PRIVATE_H diff --git a/Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h b/Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h index 2dfed2f884..a155345926 100644 --- a/Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Endstop Interrupts @@ -34,9 +35,6 @@ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino) */ -#ifndef _ENDSTOP_INTERRUPTS_H_ -#define _ENDSTOP_INTERRUPTS_H_ - #include "../../module/endstops.h" // One ISR for all EXT-Interrupts @@ -104,5 +102,3 @@ void setup_endstop_interrupts(void) { attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); #endif } - -#endif //_ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_LPC1768/fastio.h b/Marlin/src/HAL/HAL_LPC1768/fastio.h index b0ab2089be..75ea85acc2 100644 --- a/Marlin/src/HAL/HAL_LPC1768/fastio.h +++ b/Marlin/src/HAL/HAL_LPC1768/fastio.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Fast I/O Routines for LPC1768/9 @@ -32,9 +33,6 @@ * For TARGET LPC1768 */ -#ifndef _FASTIO_LPC1768_H -#define _FASTIO_LPC1768_H - #include #define USEABLE_HARDWARE_PWM(pin) TRUE // all pins are PWM capable @@ -123,5 +121,3 @@ // Shorthand #define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0) - -#endif // _FASTIO_LPC1768_H diff --git a/Marlin/src/HAL/HAL_LPC1768/include/digipot_mcp4451_I2C_routines.h b/Marlin/src/HAL/HAL_LPC1768/include/digipot_mcp4451_I2C_routines.h index e44e155a40..ac547b08b1 100644 --- a/Marlin/src/HAL/HAL_LPC1768/include/digipot_mcp4451_I2C_routines.h +++ b/Marlin/src/HAL/HAL_LPC1768/include/digipot_mcp4451_I2C_routines.h @@ -19,13 +19,11 @@ * along with this program. If not, see . * */ +#pragma once // adapted from I2C/master/master.c example // https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html -#ifndef _DIGIPOT_MCP4451_I2C_ROUTINES_H_ -#define _DIGIPOT_MCP4451_I2C_ROUTINES_H_ - #define USEDI2CDEV_M 1 // use I2C1 controller #if USEDI2CDEV_M == 0 @@ -53,5 +51,3 @@ uint8_t digipot_mcp4451_send_byte(uint8_t data); #ifdef __cplusplus } #endif - -#endif // _DIGIPOT_MCP4451_I2C_ROUTINES_H_ diff --git a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h index 2d2aed5cd6..0ea045a150 100644 --- a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h +++ b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef SPI_PINS_LPC1768_H -#define SPI_PINS_LPC1768_H +#pragma once #include "src/core/macros.h" @@ -54,5 +52,3 @@ #undef SDSS #define SDSS SS_PIN #endif - -#endif // SPI_PINS_LPC1768_H diff --git a/Marlin/src/HAL/HAL_LPC1768/watchdog.h b/Marlin/src/HAL/HAL_LPC1768/watchdog.h index 90147bd702..f185a99cdd 100644 --- a/Marlin/src/HAL/HAL_LPC1768/watchdog.h +++ b/Marlin/src/HAL/HAL_LPC1768/watchdog.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef WATCHDOG_LPC1768_H -#define WATCHDOG_LPC1768_H +#pragma once #define RST_POWER_ON 1 #define RST_EXTERNAL 2 @@ -34,5 +32,3 @@ void watchdog_init(void); void watchdog_reset(void); void HAL_clear_reset_source(void); uint8_t HAL_get_reset_source(void); - -#endif /* WATCHDOG_H */ diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL.h b/Marlin/src/HAL/HAL_STM32F1/HAL.h index 9faf200fbc..0253a0c35d 100644 --- a/Marlin/src/HAL/HAL_STM32F1/HAL.h +++ b/Marlin/src/HAL/HAL_STM32F1/HAL.h @@ -20,14 +20,12 @@ * along with this program. If not, see . * */ +#pragma once /** * HAL for stm32duino.com based on Libmaple and compatible (STM32F1) */ -#ifndef _HAL_STM32F1_H -#define _HAL_STM32F1_H - #define CPU_32_BIT #undef DEBUG_NONE @@ -251,5 +249,3 @@ void HAL_enable_AdcFreerun(void); #define JTAG_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_SW_ONLY) #define JTAGSWD_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_NONE) - -#endif // _HAL_STM32F1_H diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.h index 778269361f..668378388c 100644 --- a/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.h +++ b/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.h @@ -20,9 +20,7 @@ * along with this program. If not, see . * */ - -#ifndef HAL_SERVO_STM32F1_H -#define HAL_SERVO_STM32F1_H +#pragma once // Pin number of unattached pins #define NOT_ATTACHED (-1) @@ -53,5 +51,3 @@ class libServo { int32_t minAngle; int32_t maxAngle; }; - -#endif // HAL_SERVO_STM32F1_H diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h index 98542f8374..9610bb5533 100644 --- a/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h +++ b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * HAL for stm32duino.com based on Libmaple and compatible (STM32F1) */ -#ifndef _HAL_TIMERS_STM32F1_H -#define _HAL_TIMERS_STM32F1_H - // -------------------------------------------------------------------------- // Includes // -------------------------------------------------------------------------- @@ -167,5 +165,3 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) { } #define HAL_timer_isr_epilogue(TIMER_NUM) - -#endif // _HAL_TIMERS_STM32F1_H diff --git a/Marlin/src/HAL/HAL_STM32F1/endstop_interrupts.h b/Marlin/src/HAL/HAL_STM32F1/endstop_interrupts.h index 1ffc330d89..50d0127968 100644 --- a/Marlin/src/HAL/HAL_STM32F1/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_STM32F1/endstop_interrupts.h @@ -20,6 +20,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Endstop interrupts for Libmaple STM32F1 based targets. @@ -46,9 +47,6 @@ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino) */ -#ifndef _ENDSTOP_INTERRUPTS_H_ -#define _ENDSTOP_INTERRUPTS_H_ - #include "../../module/endstops.h" // One ISR for all EXT-Interrupts @@ -89,5 +87,3 @@ void setup_endstop_interrupts(void) { attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE); #endif } - -#endif //_ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_STM32F1/fastio_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/fastio_Stm32f1.h index e58ab8251c..237ffb0b35 100644 --- a/Marlin/src/HAL/HAL_STM32F1/fastio_Stm32f1.h +++ b/Marlin/src/HAL/HAL_STM32F1/fastio_Stm32f1.h @@ -20,15 +20,13 @@ * along with this program. If not, see . * */ +#pragma once /** * Fast I/O interfaces for STM32F1 * These use GPIO functions instead of Direct Port Manipulation, as on AVR. */ -#ifndef _FASTIO_STM32F1_H -#define _FASTIO_STM32F1_H - #include #define READ(IO) (PIN_MAP[IO].gpio_device->regs->IDR & (1U << PIN_MAP[IO].gpio_bit) ? HIGH : LOW) @@ -52,5 +50,3 @@ #define PWM_PIN(p) true #define USEABLE_HARDWARE_PWM(p) PWM_PIN(p) - -#endif // _FASTIO_STM32F1_H diff --git a/Marlin/src/HAL/HAL_STM32F1/spi_pins.h b/Marlin/src/HAL/HAL_STM32F1/spi_pins.h index f834cea3c2..b2fc2c345d 100644 --- a/Marlin/src/HAL/HAL_STM32F1/spi_pins.h +++ b/Marlin/src/HAL/HAL_STM32F1/spi_pins.h @@ -16,14 +16,12 @@ * along with this program. If not, see . * */ +#pragma once /** * HAL for stm32duino.com based on Libmaple and compatible (STM32F1) */ -#ifndef SPI_PINS_H_ -#define SPI_PINS_H_ - /** * Define SPI Pins: SCK, MISO, MOSI, SS * @@ -33,5 +31,3 @@ #define MISO_PIN PA6 #define MOSI_PIN PA7 #define SS_PIN PA4 - -#endif // SPI_PINS_H_ diff --git a/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h index f307950c76..d34efdc0a2 100644 --- a/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h +++ b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * HAL for stm32duino.com based on Libmaple and compatible (STM32F1) */ -#ifndef WATCHDOG_STM32F1_H -#define WATCHDOG_STM32F1_H - #include #include "../../inc/MarlinConfig.h" @@ -51,5 +49,3 @@ inline void watchdog_reset() { #endif iwdg_feed(); } - -#endif // WATCHDOG_STM32F1_H diff --git a/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h b/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h index a7e3e0f012..a3e93503d8 100644 --- a/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h +++ b/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h @@ -45,10 +45,7 @@ * ****************************************************************************** */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __EEEPROM_EMUL_H -#define __EEEPROM_EMUL_H +#pragma once // -------------------------------------------------------------------------- // Includes @@ -112,6 +109,4 @@ uint16_t EE_Initialize(void); uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data); uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data); -#endif /* __EEEPROM_H */ - /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL.h b/Marlin/src/HAL/HAL_STM32F4/HAL.h index dc6bda473c..9a53fe1697 100644 --- a/Marlin/src/HAL/HAL_STM32F4/HAL.h +++ b/Marlin/src/HAL/HAL_STM32F4/HAL.h @@ -20,9 +20,7 @@ * along with this program. If not, see . * */ - -#ifndef _HAL_STM32F4_H -#define _HAL_STM32F4_H +#pragma once #define CPU_32_BIT #undef DEBUG_NONE @@ -251,5 +249,3 @@ void HAL_enable_AdcFreerun(void); #define JTAG_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_SW_ONLY) #define JTAGSWD_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_NONE) - -#endif // _HAL_STM32F4_H diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h index b68910387c..5daf90ab8d 100644 --- a/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h +++ b/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h @@ -20,22 +20,18 @@ * along with this program. If not, see . * */ - -#ifndef HAL_SERVO_STM32F4_H -#define HAL_SERVO_STM32F4_H +#pragma once #include // Inherit and expand on the official library class libServo : public Servo { -public: + public: int8_t attach(const int pin); int8_t attach(const int pin, const int min, const int max); void move(const int value); -private: + private: uint16_t min_ticks; uint16_t max_ticks; uint8_t servoIndex; // index into the channel data for this servo }; - -#endif // HAL_SERVO_STM32F4_H diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h index 83081ed756..d2c1156542 100644 --- a/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h +++ b/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _HAL_TIMERS_STM32F4_H -#define _HAL_TIMERS_STM32F4_H +#pragma once // -------------------------------------------------------------------------- // Includes @@ -130,5 +128,3 @@ FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) { #endif #define HAL_timer_isr_epilogue(TIMER_NUM) - -#endif // _HAL_TIMERS_STM32F4_H diff --git a/Marlin/src/HAL/HAL_STM32F4/endstop_interrupts.h b/Marlin/src/HAL/HAL_STM32F4/endstop_interrupts.h index e207b720aa..e4a243b43e 100644 --- a/Marlin/src/HAL/HAL_STM32F4/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_STM32F4/endstop_interrupts.h @@ -20,9 +20,7 @@ * along with this program. If not, see . * */ - -#ifndef _ENDSTOP_INTERRUPTS_H_ -#define _ENDSTOP_INTERRUPTS_H_ +#pragma once #include "../../module/endstops.h" @@ -64,5 +62,3 @@ void setup_endstop_interrupts(void) { attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE); #endif } - -#endif //_ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h index 222f6dc518..61de5306cc 100644 --- a/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h +++ b/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h @@ -20,15 +20,13 @@ * along with this program. If not, see . * */ +#pragma once /** * Fast I/O interfaces for STM32F4 * These use GPIO functions instead of Direct Port Manipulation, as on AVR. */ -#ifndef _FASTIO_STM32F4_H -#define _FASTIO_STM32F4_H - #undef _BV #define _BV(b) (1 << (b)) @@ -151,5 +149,3 @@ #define PE13 _STM32_PIN(E, 13) #define PE14 _STM32_PIN(E, 14) #define PE15 _STM32_PIN(E, 15) - -#endif // _FASTIO_STM32F4_H diff --git a/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h index 89295a78e1..cff0cf469b 100644 --- a/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h +++ b/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h @@ -19,15 +19,9 @@ * along with this program. If not, see . * */ - -#ifndef WATCHDOG_STM32F4_H -#define WATCHDOG_STM32F4_H - -#include "../../inc/MarlinConfig.h" +#pragma once extern IWDG_HandleTypeDef hiwdg; void watchdog_init(); void watchdog_reset(); - -#endif // WATCHDOG_STM32F1_H diff --git a/Marlin/src/HAL/HAL_STM32F7/EEPROM_Emul/eeprom_emul.h b/Marlin/src/HAL/HAL_STM32F7/EEPROM_Emul/eeprom_emul.h index 8a45608ed9..441ff1bae1 100644 --- a/Marlin/src/HAL/HAL_STM32F7/EEPROM_Emul/eeprom_emul.h +++ b/Marlin/src/HAL/HAL_STM32F7/EEPROM_Emul/eeprom_emul.h @@ -45,10 +45,7 @@ * ****************************************************************************** */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __EEEPROM_EMUL_H -#define __EEEPROM_EMUL_H +#pragma once // -------------------------------------------------------------------------- // Includes @@ -113,6 +110,4 @@ uint16_t EE_Initialize(void); uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data); uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data); -#endif /* __EEEPROM_H */ - /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/HAL_STM32F7/HAL.h b/Marlin/src/HAL/HAL_STM32F7/HAL.h index a18fb9b0ee..02ee6a1a60 100644 --- a/Marlin/src/HAL/HAL_STM32F7/HAL.h +++ b/Marlin/src/HAL/HAL_STM32F7/HAL.h @@ -20,9 +20,7 @@ * along with this program. If not, see . * */ - -#ifndef _HAL_STM32F7_H -#define _HAL_STM32F7_H +#pragma once #define CPU_32_BIT #undef DEBUG_NONE @@ -234,5 +232,3 @@ void HAL_enable_AdcFreerun(void); #define GET_PIN_MAP_PIN(index) index #define GET_PIN_MAP_INDEX(pin) pin #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) - -#endif // _HAL_STM32F7_H diff --git a/Marlin/src/HAL/HAL_STM32F7/HAL_Servo_STM32F7.h b/Marlin/src/HAL/HAL_STM32F7/HAL_Servo_STM32F7.h index 14ba0528b0..f3a776365f 100644 --- a/Marlin/src/HAL/HAL_STM32F7/HAL_Servo_STM32F7.h +++ b/Marlin/src/HAL/HAL_STM32F7/HAL_Servo_STM32F7.h @@ -20,9 +20,7 @@ * along with this program. If not, see . * */ - -#ifndef HAL_SERVO_STM32F7_H -#define HAL_SERVO_STM32F7_H +#pragma once #include <../../libraries/Servo/src/Servo.h> @@ -37,5 +35,3 @@ private: uint16_t max_ticks; uint8_t servoIndex; // index into the channel data for this servo }; - -#endif // HAL_SERVO_STM32F7_H diff --git a/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h b/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h index 92f0215fce..b5f8cb24bc 100644 --- a/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h +++ b/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _HAL_TIMERS_STM32F7_H -#define _HAL_TIMERS_STM32F7_H +#pragma once // -------------------------------------------------------------------------- // Includes @@ -101,5 +99,3 @@ hal_timer_t HAL_timer_get_compare(const uint8_t timer_num); uint32_t HAL_timer_get_count(const uint8_t timer_num); void HAL_timer_isr_prologue(const uint8_t timer_num); #define HAL_timer_isr_epilogue(TIMER_NUM) - -#endif // _HAL_TIMERS_STM32F7_H diff --git a/Marlin/src/HAL/HAL_STM32F7/TMC2660.h b/Marlin/src/HAL/HAL_STM32F7/TMC2660.h index 4e50cfb4e2..9a26b32048 100644 --- a/Marlin/src/HAL/HAL_STM32F7/TMC2660.h +++ b/Marlin/src/HAL/HAL_STM32F7/TMC2660.h @@ -24,12 +24,9 @@ * THE SOFTWARE. * */ +#pragma once -#include "../../inc/MarlinConfig.h" - -// ensure this library description is only included once -#ifndef _TMC26XSTEPPER_H_ -#define _TMC26XSTEPPER_H_ +#include //! return value for TMC26XStepper.getOverTemperature() if there is a overtemperature situation in the TMC chip /*! @@ -601,5 +598,3 @@ class TMC26XStepper { // SPI sender inline void send262(uint32_t datagram); }; - -#endif // _TMC26XSTEPPER_H_ diff --git a/Marlin/src/HAL/HAL_STM32F7/endstop_interrupts.h b/Marlin/src/HAL/HAL_STM32F7/endstop_interrupts.h index c96d713db4..e4a243b43e 100644 --- a/Marlin/src/HAL/HAL_STM32F7/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_STM32F7/endstop_interrupts.h @@ -20,11 +20,7 @@ * along with this program. If not, see . * */ - - - -#ifndef _ENDSTOP_INTERRUPTS_H_ -#define _ENDSTOP_INTERRUPTS_H_ +#pragma once #include "../../module/endstops.h" @@ -66,5 +62,3 @@ void setup_endstop_interrupts(void) { attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE); #endif } - -#endif //_ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_STM32F7/fastio_STM32F7.h b/Marlin/src/HAL/HAL_STM32F7/fastio_STM32F7.h index 9aa43ccfc5..08f244c791 100644 --- a/Marlin/src/HAL/HAL_STM32F7/fastio_STM32F7.h +++ b/Marlin/src/HAL/HAL_STM32F7/fastio_STM32F7.h @@ -20,15 +20,13 @@ * along with this program. If not, see . * */ +#pragma once /** * Fast I/O interfaces for STM32F7 * These use GPIO functions instead of Direct Port Manipulation, as on AVR. */ -#ifndef _FASTIO_STM32F7_H -#define _FASTIO_STM32F7_H - #define _BV(b) (1 << (b)) #define READ(IO) digitalRead(IO) @@ -186,5 +184,3 @@ #define PG13 _STM32_PIN(G, 13) #define PG14 _STM32_PIN(G, 14) #define PG15 _STM32_PIN(G, 15) - -#endif // _FASTIO_STM32F7_H diff --git a/Marlin/src/HAL/HAL_STM32F7/watchdog_STM32F7.h b/Marlin/src/HAL/HAL_STM32F7/watchdog_STM32F7.h index 977f0f9b7e..cff0cf469b 100644 --- a/Marlin/src/HAL/HAL_STM32F7/watchdog_STM32F7.h +++ b/Marlin/src/HAL/HAL_STM32F7/watchdog_STM32F7.h @@ -19,15 +19,9 @@ * along with this program. If not, see . * */ - -#ifndef WATCHDOG_STM32F7_H -#define WATCHDOG_STM32F7_H - -#include "../../inc/MarlinConfig.h" +#pragma once extern IWDG_HandleTypeDef hiwdg; void watchdog_init(); void watchdog_reset(); - -#endif // WATCHDOG_STM32F1_H diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL.h b/Marlin/src/HAL/HAL_TEENSY35_36/HAL.h index b60a5d28ad..4cbf8bfec9 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * Description: HAL for Teensy 3.5 and Teensy 3.6 */ -#ifndef _HAL_TEENSY_H -#define _HAL_TEENSY_H - #define CPU_32_BIT // -------------------------------------------------------------------------- @@ -167,9 +165,3 @@ uint16_t HAL_adc_get_result(void); #define GET_PIN_MAP_PIN(index) index #define GET_PIN_MAP_INDEX(pin) pin #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) - -// -------------------------------------------------------------------------- -// -// -------------------------------------------------------------------------- - -#endif // _HAL_TEENSY_H diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.h index 78b2092051..e53b5c6796 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.h @@ -1,5 +1,25 @@ -#ifndef _HAL_SERVO_TEENSY_H_ -#define _HAL_SERVO_TEENSY_H_ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once #include @@ -14,5 +34,3 @@ class libServo : public Servo { uint16_t max_ticks; uint8_t servoIndex; // index into the channel data for this servo }; - -#endif // _HAL_SERVO_TEENSY_H_ diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h index b44c310156..29b157c156 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h @@ -1,23 +1,23 @@ -/* ************************************************************************** - - Marlin 3D Printer Firmware - Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com - Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -****************************************************************************/ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once /** * Description: HAL for @@ -25,9 +25,6 @@ * Teensy3.6 (__MK66FX1M0__) */ -#ifndef _HAL_TIMERS_TEENSY_H -#define _HAL_TIMERS_TEENSY_H - // -------------------------------------------------------------------------- // Includes // -------------------------------------------------------------------------- @@ -108,5 +105,3 @@ bool HAL_timer_interrupt_enabled(const uint8_t timer_num); void HAL_timer_isr_prologue(const uint8_t timer_num); #define HAL_timer_isr_epilogue(TIMER_NUM) - -#endif // _HAL_TIMERS_TEENSY_H diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/endstop_interrupts.h b/Marlin/src/HAL/HAL_TEENSY35_36/endstop_interrupts.h index d3f9d102bc..79a19fdbea 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/endstop_interrupts.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Endstop Interrupts @@ -34,9 +35,6 @@ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino) */ -#ifndef _ENDSTOP_INTERRUPTS_H_ -#define _ENDSTOP_INTERRUPTS_H_ - #include "../../module/endstops.h" // One ISR for all EXT-Interrupts @@ -81,5 +79,3 @@ void setup_endstop_interrupts( void ) { attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); #endif } - -#endif //_ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/fastio_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/fastio_Teensy.h index 4d31310d8d..43a4c5a786 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/fastio_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/fastio_Teensy.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Fast I/O Routines for Teensy 3.5 and Teensy 3.6 @@ -26,9 +27,6 @@ * Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al. */ -#ifndef _FASTIO_TEENSY_H -#define _FASTIO_TEENSY_H - #ifndef MASK #define MASK(PIN) (1 << PIN) #endif @@ -91,5 +89,3 @@ */ #define DIO0_PIN 8 - -#endif /* _FASTIO_TEENSY_H */ diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/spi_pins.h b/Marlin/src/HAL/HAL_TEENSY35_36/spi_pins.h index ecbc690e4d..fb4cbc140b 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/spi_pins.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/spi_pins.h @@ -19,13 +19,9 @@ * along with this program. If not, see . * */ - -#ifndef SPI_PINS_H_ -#define SPI_PINS_H_ +#pragma once #define SCK_PIN 13 #define MISO_PIN 12 #define MOSI_PIN 11 -#define SS_PIN 20 //SDSS // A.28, A.29, B.21, C.26, C.29 - -#endif /* SPI_PINS_H_ */ +#define SS_PIN 20 // SDSS // A.28, A.29, B.21, C.26, C.29 diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.h index ca05dd225a..69c422e160 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.h @@ -19,13 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef WATCHDOG_TEENSY_H -#define WATCHDOG_TEENSY_H - -#include "HAL.h" - -// Arduino Due core now has watchdog support +#pragma once void watchdog_init(); @@ -34,5 +28,3 @@ inline void watchdog_reset() { WDOG_REFRESH = 0xA602; WDOG_REFRESH = 0xB480; } - -#endif // WATCHDOG_TEENSY_H diff --git a/Marlin/src/HAL/platforms.h b/Marlin/src/HAL/platforms.h index 894100f8be..c1e0e9f8e6 100644 --- a/Marlin/src/HAL/platforms.h +++ b/Marlin/src/HAL/platforms.h @@ -1,7 +1,25 @@ -#ifndef _HAL_PLATFORMS_H_ -#define _HAL_PLATFORMS_H_ - -#ifndef HAL_PLATFORM +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once #ifdef __AVR__ #define HAL_PLATFORM HAL_AVR @@ -27,10 +45,6 @@ #error "Unsupported Platform!" #endif -#endif // HAL_PLATFORM - #define XSTR_(M) #M #define XSTR(M) XSTR_(M) #define HAL_PATH(PATH, NAME) XSTR(PATH/HAL_PLATFORM/NAME) - -#endif // _HAL_PLATFORMS_H_ diff --git a/Marlin/src/HAL/shared/HAL_SPI.h b/Marlin/src/HAL/shared/HAL_SPI.h index 388b9f9cfb..cc2304fc57 100644 --- a/Marlin/src/HAL/shared/HAL_SPI.h +++ b/Marlin/src/HAL/shared/HAL_SPI.h @@ -19,15 +19,13 @@ * along with this program. If not, see . * */ +#pragma once /** * HAL/HAL_SPI.h * Core Marlin definitions for SPI, implemented in the HALs */ -#ifndef _HAL_SPI_H_ -#define _HAL_SPI_H_ - #include /** @@ -78,5 +76,3 @@ void spiRead(uint8_t* buf, uint16_t nbyte); void spiSendBlock(uint8_t token, const uint8_t* buf); /** Begin SPI transaction, set clock, bit order, data mode */ void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode); - -#endif // _HAL_SPI_H_ diff --git a/Marlin/src/HAL/shared/backtrace/backtrace.h b/Marlin/src/HAL/shared/backtrace/backtrace.h index c2761b9f5a..37a567189c 100644 --- a/Marlin/src/HAL/shared/backtrace/backtrace.h +++ b/Marlin/src/HAL/shared/backtrace/backtrace.h @@ -19,11 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _BACKTRACE_H_ -#define _BACKTRACE_H_ +#pragma once // Perform a backtrace to the serial port void backtrace(void); - -#endif \ No newline at end of file diff --git a/Marlin/src/HAL/shared/backtrace/unwarm.h b/Marlin/src/HAL/shared/backtrace/unwarm.h index 8ecdeba8a5..7414ecc06b 100644 --- a/Marlin/src/HAL/shared/backtrace/unwarm.h +++ b/Marlin/src/HAL/shared/backtrace/unwarm.h @@ -11,8 +11,7 @@ * File Description: Internal interface between the ARM unwinding sub-modules. **************************************************************************/ -#ifndef UNWARM_H -#define UNWARM_H +#pragma once #include "unwinder.h" @@ -139,5 +138,3 @@ bool UnwReportRetAddr(UnwState * const state, uint32_t addr); bool UnwMemWriteRegister(UnwState * const state, const uint32_t addr, const RegData * const reg); bool UnwMemReadRegister(UnwState * const state, const uint32_t addr, RegData * const reg); void UnwMemHashGC(UnwState * const state); - -#endif // UNWARM_H diff --git a/Marlin/src/HAL/shared/backtrace/unwarmbytab.h b/Marlin/src/HAL/shared/backtrace/unwarmbytab.h index 527d3a6c72..77a1c82dbd 100644 --- a/Marlin/src/HAL/shared/backtrace/unwarmbytab.h +++ b/Marlin/src/HAL/shared/backtrace/unwarmbytab.h @@ -12,8 +12,7 @@ * File Description: Interface to the memory tracking sub-system. **************************************************************************/ -#ifndef UNWARMBYTAB_H -#define UNWARMBYTAB_H +#pragma once #include "unwarm.h" @@ -30,5 +29,3 @@ typedef struct { } UnwTabEntry; UnwResult UnwindByTableStart(UnwindFrame* frame, const UnwindCallbacks *cb, void *data); - -#endif // UNWARMBYTAB_H diff --git a/Marlin/src/HAL/shared/backtrace/unwarmmem.h b/Marlin/src/HAL/shared/backtrace/unwarmmem.h index f30846b34c..588618b34f 100644 --- a/Marlin/src/HAL/shared/backtrace/unwarmmem.h +++ b/Marlin/src/HAL/shared/backtrace/unwarmmem.h @@ -12,14 +12,10 @@ * File Description: Interface to the memory tracking sub-system. **************************************************************************/ -#ifndef UNWARMMEM_H -#define UNWARMMEM_H +#pragma once #include "unwarm.h" bool UnwMemHashRead(MemData * const memData, uint32_t addr, uint32_t * const data, bool * const tracked); bool UnwMemHashWrite(MemData * const memData, uint32_t addr, uint32_t val, bool valValid); void UnwMemHashGC(UnwState * const state); - -#endif - diff --git a/Marlin/src/HAL/shared/backtrace/unwinder.h b/Marlin/src/HAL/shared/backtrace/unwinder.h index 29132d0b5b..604854ad0f 100644 --- a/Marlin/src/HAL/shared/backtrace/unwinder.h +++ b/Marlin/src/HAL/shared/backtrace/unwinder.h @@ -13,8 +13,7 @@ * Interface to the ARM stack unwinding module. **************************************************************************/ -#ifndef UNWINDER_H -#define UNWINDER_H +#pragma once #include @@ -171,5 +170,3 @@ typedef struct { * get function names in the traceback. Otherwise, you will not. */ UnwResult UnwindStart(UnwindFrame* frame, const UnwindCallbacks *cb, void *data); - -#endif /* UNWINDER_H */ diff --git a/Marlin/src/HAL/shared/backtrace/unwmemaccess.h b/Marlin/src/HAL/shared/backtrace/unwmemaccess.h index 5405f3a673..fe42bd9485 100644 --- a/Marlin/src/HAL/shared/backtrace/unwmemaccess.h +++ b/Marlin/src/HAL/shared/backtrace/unwmemaccess.h @@ -12,8 +12,7 @@ * File Description: Utility functions to access memory **************************************************************************/ -#ifndef UNWMEMACCESS_H -#define UNWMEMACCESS_H +#pragma once #include "unwarm.h" #include @@ -21,6 +20,3 @@ bool UnwReadW(const uint32_t a, uint32_t *v); bool UnwReadH(const uint32_t a, uint16_t *v); bool UnwReadB(const uint32_t a, uint8_t *v); - -#endif - diff --git a/Marlin/src/HAL/shared/math_32bit.h b/Marlin/src/HAL/shared/math_32bit.h index 472dfc3b56..5ce51b62ab 100644 --- a/Marlin/src/HAL/shared/math_32bit.h +++ b/Marlin/src/HAL/shared/math_32bit.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef MATH_32BIT_H -#define MATH_32BIT_H +#pragma once #include "../../core/macros.h" @@ -31,5 +29,3 @@ static FORCE_INLINE uint32_t MultiU32X24toH32(uint32_t longIn1, uint32_t longIn2) { return ((uint64_t)longIn1 * longIn2 + 0x00800000) >> 24; } - -#endif // MATH_32BIT_H diff --git a/Marlin/src/HAL/shared/servo_private.h b/Marlin/src/HAL/shared/servo_private.h index 2dcc9eb98f..522e4594ff 100644 --- a/Marlin/src/HAL/shared/servo_private.h +++ b/Marlin/src/HAL/shared/servo_private.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * servo_private.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 @@ -39,9 +40,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef SERVO_PRIVATE_H -#define SERVO_PRIVATE_H - #include // Architecture specific include @@ -98,5 +96,3 @@ extern ServoInfo_t servo_info[MAX_SERVOS]; extern void initISR(timer16_Sequence_t timer); extern void finISR(timer16_Sequence_t timer); - -#endif // SERVO_PRIVATE_H diff --git a/Marlin/src/Marlin.h b/Marlin/src/Marlin.h index cd95f964fa..1025d677c9 100644 --- a/Marlin/src/Marlin.h +++ b/Marlin/src/Marlin.h @@ -19,8 +19,7 @@ * along with this program. If not, see . * */ -#ifndef __MARLIN_H__ -#define __MARLIN_H__ +#pragma once #include "inc/MarlinConfig.h" @@ -242,5 +241,3 @@ void protected_pin_err(); #if HAS_SUICIDE inline void suicide() { OUT_WRITE(SUICIDE_PIN, LOW); } #endif - -#endif // __MARLIN_H__ diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 64d266114c..5a5dc76cd1 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef BOARDS_H -#define BOARDS_H +#pragma once #define BOARD_UNKNOWN -1 @@ -247,5 +245,3 @@ #define BOARD_ESP32 1900 #define MB(board) (defined(BOARD_##board) && MOTHERBOARD==BOARD_##board) - -#endif // __BOARDS_H diff --git a/Marlin/src/core/enum.h b/Marlin/src/core/enum.h index bf30f7b628..7abfe0bb88 100644 --- a/Marlin/src/core/enum.h +++ b/Marlin/src/core/enum.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __ENUM_H__ -#define __ENUM_H__ +#pragma once /** * Axis indices as enumerated constants @@ -68,5 +66,3 @@ typedef enum { TEMPUNIT_K, TEMPUNIT_F } TempUnit; - -#endif // __ENUM_H__ diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h index 9320167bd3..ea7ee6a671 100644 --- a/Marlin/src/core/serial.h +++ b/Marlin/src/core/serial.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ +#pragma once #include "../inc/MarlinConfigPre.h" #include HAL_PATH(../HAL, HAL.h) @@ -246,5 +244,3 @@ void serial_error_start(); void print_xyz(PGM_P prefix, PGM_P suffix, const float xyz[]); #define DEBUG_POS(SUFFIX,VAR) do { print_xyz(PSTR(" " STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n"), VAR); } while(0) #endif - -#endif // __SERIAL_H__ diff --git a/Marlin/src/core/utility.h b/Marlin/src/core/utility.h index 05ba721def..8122c3b5ad 100644 --- a/Marlin/src/core/utility.h +++ b/Marlin/src/core/utility.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __UTILITY_H__ -#define __UTILITY_H__ +#pragma once #include "../inc/MarlinConfigPre.h" @@ -102,5 +100,3 @@ void safe_delay(millis_t ms); #if ENABLED(DEBUG_LEVELING_FEATURE) void log_machine_info(); #endif - -#endif // __UTILITY_H__ diff --git a/Marlin/src/feature/I2CPositionEncoder.h b/Marlin/src/feature/I2CPositionEncoder.h index 0fba3615a8..32895e62ce 100644 --- a/Marlin/src/feature/I2CPositionEncoder.h +++ b/Marlin/src/feature/I2CPositionEncoder.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef I2CPOSENC_H -#define I2CPOSENC_H +#pragma once #include "../inc/MarlinConfig.h" @@ -331,5 +329,3 @@ class I2CPositionEncodersMgr { }; extern I2CPositionEncodersMgr I2CPEM; - -#endif //I2CPOSENC_H diff --git a/Marlin/src/feature/baricuda.h b/Marlin/src/feature/baricuda.h index 7ed23925b8..a7a70d8dc9 100644 --- a/Marlin/src/feature/baricuda.h +++ b/Marlin/src/feature/baricuda.h @@ -19,11 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __BARICUDA_H__ -#define __BARICUDA_H__ +#pragma once extern uint8_t baricuda_valve_pressure, baricuda_e_to_p_pressure; - -#endif // __BARICUDA_H__ diff --git a/Marlin/src/feature/bedlevel/abl/abl.h b/Marlin/src/feature/bedlevel/abl/abl.h index 0ac1f424bb..8a82bfb3be 100644 --- a/Marlin/src/feature/bedlevel/abl/abl.h +++ b/Marlin/src/feature/bedlevel/abl/abl.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __ABL_H__ -#define __ABL_H__ +#pragma once #include "../../../inc/MarlinConfig.h" @@ -47,5 +45,3 @@ #endif #endif // AUTO_BED_LEVELING_BILINEAR - -#endif // __ABL_H__ diff --git a/Marlin/src/feature/bedlevel/bedlevel.h b/Marlin/src/feature/bedlevel/bedlevel.h index 3db5aabd68..d9c5cdee7d 100644 --- a/Marlin/src/feature/bedlevel/bedlevel.h +++ b/Marlin/src/feature/bedlevel/bedlevel.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __BEDLEVEL_H__ -#define __BEDLEVEL_H__ +#pragma once #include "../../inc/MarlinConfigPre.h" @@ -85,5 +83,3 @@ void reset_bed_level(); #elif HAS_ABL #include "abl/abl.h" #endif - -#endif // __BEDLEVEL_H__ diff --git a/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h b/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h index 5b68edefe5..22563e9d9b 100644 --- a/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h +++ b/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _MESH_BED_LEVELING_H_ -#define _MESH_BED_LEVELING_H_ +#pragma once #include "../../../inc/MarlinConfig.h" @@ -120,5 +118,3 @@ public: }; extern mesh_bed_leveling mbl; - -#endif // _MESH_BED_LEVELING_H_ diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.h b/Marlin/src/feature/bedlevel/ubl/ubl.h index f851b2e05c..6f2cfb1ac6 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl.h +++ b/Marlin/src/feature/bedlevel/ubl/ubl.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef UNIFIED_BED_LEVELING_H -#define UNIFIED_BED_LEVELING_H +#pragma once //#define UBL_DEVEL_DEBUGGING @@ -372,5 +370,3 @@ class unified_bed_leveling { }; // class unified_bed_leveling extern unified_bed_leveling ubl; - -#endif // UNIFIED_BED_LEVELING_H diff --git a/Marlin/src/feature/caselight.h b/Marlin/src/feature/caselight.h index 3e16819eb5..4cd6c13770 100644 --- a/Marlin/src/feature/caselight.h +++ b/Marlin/src/feature/caselight.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __CASELIGHT_H__ -#define __CASELIGHT_H__ +#pragma once extern uint8_t case_light_brightness; extern bool case_light_on; @@ -29,5 +27,3 @@ extern uint8_t case_light_brightness_sav; // saves brighness info when case_li extern bool case_light_arg_flag; // flag to notify if S or P argument type void update_case_light(); - -#endif // __CASELIGHT_H__ diff --git a/Marlin/src/feature/controllerfan.h b/Marlin/src/feature/controllerfan.h index 8a7b393c33..7badc99d26 100644 --- a/Marlin/src/feature/controllerfan.h +++ b/Marlin/src/feature/controllerfan.h @@ -19,10 +19,6 @@ * along with this program. If not, see . * */ - -#ifndef __CONTROLLERFAN_H__ -#define __CONTROLLERFAN_H__ +#pragma once void controllerfan_update(); - -#endif // __CONTROLLERFAN_H__ diff --git a/Marlin/src/feature/dac/dac_dac084s085.h b/Marlin/src/feature/dac/dac_dac084s085.h index af98c16776..f1b69c292b 100644 --- a/Marlin/src/feature/dac/dac_dac084s085.h +++ b/Marlin/src/feature/dac/dac_dac084s085.h @@ -1,5 +1,25 @@ -#ifndef DAC084S085_H -#define DAC084S085_H +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once class dac084s085 { public: @@ -9,5 +29,3 @@ class dac084s085 { private: static void cshigh(); }; - -#endif // DAC084S085_H diff --git a/Marlin/src/feature/dac/dac_mcp4728.h b/Marlin/src/feature/dac/dac_mcp4728.h index aeacaaa0bc..2e0937fcf6 100644 --- a/Marlin/src/feature/dac/dac_mcp4728.h +++ b/Marlin/src/feature/dac/dac_mcp4728.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * Arduino library for MicroChip MCP4728 I2C D/A converter. */ -#ifndef DAC_MCP4728_H -#define DAC_MCP4728_H - #include #define defaultVDD DAC_STEPPER_MAX //was 5000 but differs with internal Vref @@ -57,5 +55,3 @@ uint8_t mcp4728_fastWrite(); uint8_t mcp4728_simpleCommand(byte simpleCommand); uint8_t mcp4728_getDrvPct(uint8_t channel); void mcp4728_setDrvPct(uint8_t pct[XYZE]); - -#endif // DAC_MCP4728_H diff --git a/Marlin/src/feature/dac/stepper_dac.h b/Marlin/src/feature/dac/stepper_dac.h index e74bac5f15..a2e2370482 100644 --- a/Marlin/src/feature/dac/stepper_dac.h +++ b/Marlin/src/feature/dac/stepper_dac.h @@ -19,31 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * stepper_dac.h - To set stepper current via DAC - * - * Part of Marlin - * - * Copyright (c) 2016 MarlinFirmware - * - * Marlin is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * Marlin is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with Marlin. If not, see . */ -#ifndef STEPPER_DAC_H -#define STEPPER_DAC_H - #include "dac_mcp4728.h" int dac_init(); @@ -53,5 +34,3 @@ void dac_print_values(); void dac_commit_eeprom(); uint8_t dac_current_get_percent(AxisEnum axis); void dac_current_set_percents(const uint8_t pct[XYZE]); - -#endif // STEPPER_DAC_H diff --git a/Marlin/src/feature/digipot/digipot.h b/Marlin/src/feature/digipot/digipot.h index f2cd00ba6e..d4354c748f 100644 --- a/Marlin/src/feature/digipot/digipot.h +++ b/Marlin/src/feature/digipot/digipot.h @@ -19,11 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __DIGIPOT_H__ -#define __DIGIPOT_H__ +#pragma once void digipot_i2c_set_current(const uint8_t channel, const float current); void digipot_i2c_init(); - -#endif // __DIGIPOT_H__ diff --git a/Marlin/src/feature/fanmux.h b/Marlin/src/feature/fanmux.h index 2524876146..2dfc4aabf8 100644 --- a/Marlin/src/feature/fanmux.h +++ b/Marlin/src/feature/fanmux.h @@ -19,15 +19,11 @@ * along with this program. If not, see . * */ +#pragma once /** * feature/fanmux.h - Cooling Fan Multiplexer support functions */ -#ifndef _FANMUX_H_ -#define _FANMUX_H_ - extern void fanmux_switch(const uint8_t e); extern void fanmux_init(void); - -#endif // _FANMUX_H_ diff --git a/Marlin/src/feature/filwidth.h b/Marlin/src/feature/filwidth.h index 1f0dfc6f04..a130e8cf8c 100644 --- a/Marlin/src/feature/filwidth.h +++ b/Marlin/src/feature/filwidth.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __FILWIDTH_H__ -#define __FILWIDTH_H__ +#pragma once #include "../inc/MarlinConfig.h" @@ -31,5 +29,3 @@ extern float filament_width_nominal, // Nominal filament extern uint8_t meas_delay_cm; // Distance delay setting extern int8_t measurement_delay[MAX_MEASUREMENT_DELAY + 1], // Ring buffer to delayed measurement. Store extruder factor after subtracting 100 filwidth_delay_index[2]; // Indexes into ring buffer - -#endif // __FILWIDTH_H__ diff --git a/Marlin/src/feature/leds/blinkm.h b/Marlin/src/feature/leds/blinkm.h index 20e84d9a95..8709ebda34 100644 --- a/Marlin/src/feature/leds/blinkm.h +++ b/Marlin/src/feature/leds/blinkm.h @@ -19,17 +19,13 @@ * along with this program. If not, see . * */ +#pragma once /** * blinkm.h - Control a BlinkM over i2c */ -#ifndef _BLINKM_H_ -#define _BLINKM_H_ - struct LEDColor; typedef LEDColor LEDColor; void blinkm_set_led_color(const LEDColor &color); - -#endif // _BLINKM_H_ diff --git a/Marlin/src/feature/leds/neopixel.h b/Marlin/src/feature/leds/neopixel.h index 9f24b0287a..f761877c9a 100644 --- a/Marlin/src/feature/leds/neopixel.h +++ b/Marlin/src/feature/leds/neopixel.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * Neopixel support */ -#ifndef __NEOPIXEL_H__ -#define __NEOPIXEL_H__ - #include "../../inc/MarlinConfig.h" #include @@ -46,5 +44,3 @@ void set_neopixel_color(const uint32_t color); //bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p); extern Adafruit_NeoPixel pixels; - -#endif // __NEOPIXEL_H__ diff --git a/Marlin/src/feature/leds/pca9632.h b/Marlin/src/feature/leds/pca9632.h index 4d98267beb..f2d6687780 100644 --- a/Marlin/src/feature/leds/pca9632.h +++ b/Marlin/src/feature/leds/pca9632.h @@ -19,18 +19,14 @@ * along with this program. If not, see . * */ +#pragma once /** * Driver for the Philips PCA9632 LED driver. * Written by Robert Mendon Feb 2017. */ -#ifndef __PCA9632_H__ -#define __PCA9632_H__ - struct LEDColor; typedef LEDColor LEDColor; void pca9632_set_led_color(const LEDColor &color); - -#endif // __PCA9632_H__ diff --git a/Marlin/src/feature/leds/tempstat.h b/Marlin/src/feature/leds/tempstat.h index 290e73f1c0..ac50d93f29 100644 --- a/Marlin/src/feature/leds/tempstat.h +++ b/Marlin/src/feature/leds/tempstat.h @@ -19,14 +19,10 @@ * along with this program. If not, see . * */ +#pragma once /** * Marlin general RGB LED support */ -#ifndef __TEMPSTAT_H__ -#define __TEMPSTAT_H__ - void handle_status_leds(void); - -#endif // __TEMPSTAT_H__ diff --git a/Marlin/src/feature/snmm.h b/Marlin/src/feature/snmm.h index b15f9147a6..ad8782d16a 100644 --- a/Marlin/src/feature/snmm.h +++ b/Marlin/src/feature/snmm.h @@ -19,10 +19,6 @@ * along with this program. If not, see . * */ - -#ifndef __SNMM_H__ -#define __SNMM_H__ +#pragma once void select_multiplexed_stepper(const uint8_t e); - -#endif // __SNMM_H__ diff --git a/Marlin/src/feature/solenoid.h b/Marlin/src/feature/solenoid.h index 6373b2ed30..6652b19daa 100644 --- a/Marlin/src/feature/solenoid.h +++ b/Marlin/src/feature/solenoid.h @@ -19,12 +19,8 @@ * along with this program. If not, see . * */ - -#ifndef __SOLENOID_H__ -#define __SOLENOID_H__ +#pragma once void enable_solenoid_on_active_extruder(); void disable_all_solenoids(); void enable_solenoid(const uint8_t num); - -#endif // __SOLENOID_H__ diff --git a/Marlin/src/feature/tmc_util.h b/Marlin/src/feature/tmc_util.h index 84f9cf94ee..015c82c499 100644 --- a/Marlin/src/feature/tmc_util.h +++ b/Marlin/src/feature/tmc_util.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef _TMC_UTIL_H_ -#define _TMC_UTIL_H_ +#pragma once #include "../inc/MarlinConfig.h" #if HAS_TRINAMIC @@ -179,5 +177,3 @@ void monitor_tmc_driver(); #if TMC_HAS_SPI void tmc_init_cs_pins(); #endif - -#endif // _TMC_UTIL_H_ diff --git a/Marlin/src/feature/twibus.h b/Marlin/src/feature/twibus.h index 7a17e2d53a..449cf7f691 100644 --- a/Marlin/src/feature/twibus.h +++ b/Marlin/src/feature/twibus.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef TWIBUS_H -#define TWIBUS_H +#pragma once #include "../core/macros.h" @@ -238,5 +236,3 @@ class TWIBus { #endif }; - -#endif // TWIBUS_H diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index c697e33c09..acaf73229e 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -251,9 +251,7 @@ * T0-T3 - Select an extruder (tool) by index: "T F" * */ - -#ifndef _GCODE_H_ -#define _GCODE_H_ +#pragma once #include "../inc/MarlinConfig.h" #include "parser.h" @@ -829,5 +827,3 @@ private: }; extern GcodeSuite gcode; - -#endif // _GCODE_H_ diff --git a/Marlin/src/gcode/queue.h b/Marlin/src/gcode/queue.h index a75d8affa4..0f4f95cd0f 100644 --- a/Marlin/src/gcode/queue.h +++ b/Marlin/src/gcode/queue.h @@ -19,15 +19,13 @@ * along with this program. If not, see . * */ +#pragma once /** * queue.h - The G-code command queue, which holds commands before they * go to the parser and dispatcher. */ -#ifndef GCODE_QUEUE_H -#define GCODE_QUEUE_H - #include "../inc/MarlinConfig.h" /** @@ -125,5 +123,3 @@ void get_available_commands(); * Get the next command in the queue, optionally log it to SD, then dispatch it */ void advance_command_queue(); - -#endif // GCODE_QUEUE_H diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index 289f174373..edafe6e23d 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -19,30 +19,26 @@ * along with this program. If not, see . * */ +#pragma once /** * Conditionals_adv.h * Defines that depend on advanced configuration. */ -#ifndef CONDITIONALS_ADV_H -#define CONDITIONALS_ADV_H - - #if !defined(__AVR__) || !defined(USBCON) - // Define constants and variables for buffering serial data. - // Use only 0 or powers of 2 greater than 1 - // : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...] - #ifndef RX_BUFFER_SIZE - #define RX_BUFFER_SIZE 128 - #endif - // 256 is the max TX buffer limit due to uint8_t head and tail - // : [0, 4, 8, 16, 32, 64, 128, 256] - #ifndef TX_BUFFER_SIZE - #define TX_BUFFER_SIZE 32 - #endif - #else - // SERIAL_XON_XOFF not supported on USB-native devices - #undef SERIAL_XON_XOFF +#if !defined(__AVR__) || !defined(USBCON) + // Define constants and variables for buffering serial data. + // Use only 0 or powers of 2 greater than 1 + // : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...] + #ifndef RX_BUFFER_SIZE + #define RX_BUFFER_SIZE 128 #endif - -#endif // CONDITIONALS_ADV_H + // 256 is the max TX buffer limit due to uint8_t head and tail + // : [0, 4, 8, 16, 32, 64, 128, 256] + #ifndef TX_BUFFER_SIZE + #define TX_BUFFER_SIZE 32 + #endif +#else + // SERIAL_XON_XOFF not supported on USB-native devices + #undef SERIAL_XON_XOFF +#endif diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index c7b09e0c48..f086bea982 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -19,15 +19,13 @@ * along with this program. If not, see . * */ +#pragma once /** * Conditionals_post.h * Defines that depend on configuration but are not editable. */ -#ifndef CONDITIONALS_POST_H -#define CONDITIONALS_POST_H - #define AVR_ATmega2560_FAMILY_PLUS_70 ( \ MB(BQ_ZUM_MEGA_3D) \ || MB(MIGHTYBOARD_REVE) \ @@ -1637,5 +1635,3 @@ #else #define Z_STEPPER_COUNT 1 #endif - -#endif // CONDITIONALS_POST_H diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h index 12a7ba9ae2..d3e91927e0 100644 --- a/Marlin/src/lcd/language/language_an.h +++ b/Marlin/src/lcd/language/language_an.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Aragonese @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_AN_H -#define LANGUAGE_AN_H #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 @@ -256,5 +255,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("cargar filamento") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Aguardando impre.") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pa continar") - -#endif // LANGUAGE_AN_H diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h index ddce04a60e..f7471675c7 100644 --- a/Marlin/src/lcd/language/language_bg.h +++ b/Marlin/src/lcd/language/language_bg.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Bulgarian @@ -27,9 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_BG_H -#define LANGUAGE_BG_H - #define DISPLAY_CHARSET_ISO10646_5 #define CHARSIZE 2 @@ -146,5 +144,3 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровка Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровка Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровка Център") - -#endif // LANGUAGE_BG_H diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index a8e93aac77..3826cb6c3d 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Catalan @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_CA_H -#define LANGUAGE_CA_H #define CHARSIZE 2 @@ -261,5 +260,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Carregant...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprenent...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_CA_H diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index dbde4b406c..878ed6ef59 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Czech @@ -32,8 +33,6 @@ * http://www.zahradniksebavi.cz * */ -#ifndef LANGUAGE_CZ_UTF_H -#define LANGUAGE_CZ_UTF_H #define DISPLAY_CHARSET_ISO10646_CZ #define CHARSIZE 2 @@ -406,5 +405,3 @@ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_CZ_UTF_H diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index aa0a8262fb..2b489618f4 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Danish @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_DA_H -#define LANGUAGE_DA_H #define DISPLAY_CHARSET_ISO10646_1 #define CHARSIZE 2 @@ -250,5 +249,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Indtager...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsætter...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_DA_H diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index a915829c89..6b761948e3 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * German @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_DE_H -#define LANGUAGE_DE_H #define CHARSIZE 2 @@ -427,5 +426,3 @@ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Entleeren...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_DE_H diff --git a/Marlin/src/lcd/language/language_el-gr.h b/Marlin/src/lcd/language/language_el-gr.h index e5838e9f9d..fc5d642bc0 100644 --- a/Marlin/src/lcd/language/language_el-gr.h +++ b/Marlin/src/lcd/language/language_el-gr.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Greek (Greece) @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_EL_GR_H -#define LANGUAGE_EL_GR_H #define DISPLAY_CHARSET_ISO10646_GREEK #define CHARSIZE 2 @@ -186,5 +185,3 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Βαθμονόμηση Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου") - -#endif // LANGUAGE_EL_GR_H diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h index 2e2ed7e1dd..c7ab0b28b8 100644 --- a/Marlin/src/lcd/language/language_el.h +++ b/Marlin/src/lcd/language/language_el.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Greek @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_EL_H -#define LANGUAGE_EL_H #define DISPLAY_CHARSET_ISO10646_GREEK #define CHARSIZE 2 @@ -187,5 +186,3 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Βαθμονόμηση Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου") - -#endif // LANGUAGE_EL_H diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 0ae25c6b94..ec829406f1 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * English @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_EN_H -#define LANGUAGE_EN_H #define en 1234 #if LCD_LANGUAGE == en @@ -1149,5 +1148,3 @@ #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") #endif #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_EN_H diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index 7c5c3b593e..0852215550 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Spanish @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_ES_UTF_H -#define LANGUAGE_ES_UTF_H #define DISPLAY_CHARSET_ISO10646_1 #define CHARSIZE 2 @@ -262,5 +261,3 @@ #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Calentar la boquilla") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Calentando boquilla") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Espere por favor") - -#endif // LANGUAGE_ES_UTF_H diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index 11ee846904..05b46b4f7e 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Basque-Euskera @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_EU_H -#define LANGUAGE_EU_H #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 @@ -360,32 +359,30 @@ // ...or up to 2 lines on a 3-line display // #if LCD_HEIGHT >= 4 -// #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start") -// #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament") -// #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change") -// #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for") -// #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") -// #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament") -// #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button") -// #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...") -// #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to") -// #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.") -// #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle") -// #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...") -// #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for") -// #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") -// #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Wait for") -// #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("filament purge") -// #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") -// #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") + //#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start") + //#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament") + //#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change") + //#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for") + //#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") + //#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament") + //#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button") + //#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...") + //#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to") + //#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.") + //#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle") + //#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...") + //#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for") + //#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") + //#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Wait for") + //#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("filament purge") + //#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") + //#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") #else // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Mesedez, itxaron...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Deskargatzen...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Sartu eta click egin") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Berotzen...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Kargatzen...") -// #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...") -// #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") + //#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...") + //#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_EU_H diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h index 12f67d4452..6155a4e9fe 100644 --- a/Marlin/src/lcd/language/language_fi.h +++ b/Marlin/src/lcd/language/language_fi.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Finnish @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_FI_H -#define LANGUAGE_FI_H #define DISPLAY_CHARSET_ISO10646_1 #define CHARSIZE 2 @@ -169,5 +168,3 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibroi Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibroi Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibroi Center") - -#endif // LANGUAGE_FI_H diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index cd9ff69f77..0f09b83d06 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * French @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_FR_UTF_H -#define LANGUAGE_FR_UTF_H #define DISPLAY_CHARSET_ISO10646_1 #define CHARSIZE 2 @@ -392,5 +391,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_FR_UTF_H diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index 42ec703e04..ba9382ac46 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Galician language (ISO "gl") @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_GL_H -#define LANGUAGE_GL_H #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 @@ -251,5 +250,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cargando...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Seguindo...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_GL_H diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h index 57f6abc4be..e3f60c58ea 100644 --- a/Marlin/src/lcd/language/language_hr.h +++ b/Marlin/src/lcd/language/language_hr.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Croatian (Hrvatski) @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_HR_H -#define LANGUAGE_HR_H #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays. #define CHARSIZE 2 @@ -250,5 +249,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_HR_H diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index f7b95ddad0..ad060c7923 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Italian @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_IT_H -#define LANGUAGE_IT_H #define DISPLAY_CHARSET_ISO10646_1 @@ -423,5 +422,3 @@ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Spurgo filamento") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_IT_H diff --git a/Marlin/src/lcd/language/language_jp-kana.h b/Marlin/src/lcd/language/language_jp-kana.h index ebe0bfbc1a..a297ba9028 100644 --- a/Marlin/src/lcd/language/language_jp-kana.h +++ b/Marlin/src/lcd/language/language_jp-kana.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Japanese (Kana) @@ -29,9 +30,6 @@ * */ -#ifndef LANGUAGE_KANA_UTF_H -#define LANGUAGE_KANA_UTF_H - #define DISPLAY_CHARSET_ISO10646_KANA #define CHARSIZE 3 @@ -221,5 +219,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("シバラクオマチクダサイ") // "filament load" #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("プリントヲサイカイシマス") // "Wait for print" #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("シバラクオマチクダサイ") // "to resume" - -#endif // LANGUAGE_KANA_UTF_H diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h index f22f3615c8..e39a2f8beb 100644 --- a/Marlin/src/lcd/language/language_ko_KR.h +++ b/Marlin/src/lcd/language/language_ko_KR.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Korean @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_KO_KR_H -#define LANGUAGE_KO_KR_H #define CHARSIZE 1 @@ -412,5 +411,3 @@ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_KO_KR_H diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h index 6c2d383200..cfe17216ea 100644 --- a/Marlin/src/lcd/language/language_nl.h +++ b/Marlin/src/lcd/language/language_nl.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Dutch @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_NL_H -#define LANGUAGE_NL_H #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 @@ -281,5 +280,3 @@ #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("printing...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_NL_H diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index 478ece8987..a724fd74d3 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * Polish for DOGM display - includes accented characters */ -#ifndef LANGUAGE_PL_DOGM_H -#define LANGUAGE_PL_DOGM_H - #define DISPLAY_CHARSET_ISO10646_PL #define CHARSIZE 2 @@ -253,5 +251,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ładowanie...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_PL_DOGM_H diff --git a/Marlin/src/lcd/language/language_pt-br.h b/Marlin/src/lcd/language/language_pt-br.h index f6ce554987..9144547043 100644 --- a/Marlin/src/lcd/language/language_pt-br.h +++ b/Marlin/src/lcd/language/language_pt-br.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Portuguese (Brazil) @@ -28,8 +29,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_PT_BR_UTF_H -#define LANGUAGE_PT_BR_UTF_H // Put characters here that should be displayed with M117 //_UxGT("áãàçÉéêíóõ") @@ -382,5 +381,3 @@ #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusando...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Continuando...") #endif - -#endif // LANGUAGE_PT_BR_UTF_H diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h index a243d75d58..36f5ebc2a8 100644 --- a/Marlin/src/lcd/language/language_pt.h +++ b/Marlin/src/lcd/language/language_pt.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Portuguese @@ -28,8 +29,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_PT_UTF_H -#define LANGUAGE_PT_UTF_H #define DISPLAY_CHARSET_ISO10646_1 #define CHARSIZE 2 @@ -186,5 +185,3 @@ #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") #define MSG_LCD_ENDSTOPS _UxGT("Fim de curso") - -#endif // LANGUAGE_PT_UTF_H diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h index 3bfb82d4d5..8189e202fb 100644 --- a/Marlin/src/lcd/language/language_ru.h +++ b/Marlin/src/lcd/language/language_ru.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Russian @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_RU_H -#define LANGUAGE_RU_H #define DISPLAY_CHARSET_ISO10646_5 #define CHARSIZE 2 @@ -399,5 +398,3 @@ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Выдавливание...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Возобновление...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_RU_H diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index 2f78581a7c..47e4d6e4a6 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Slovak @@ -31,8 +32,6 @@ * http://www.facebook.com/farmamam * */ -#ifndef LANGUAGE_SK_UTF_H -#define LANGUAGE_SK_UTF_H // Put characters here that should be displayed with M117 //_UxGT("aäAÄaáAÁeéEÉiíIÍlĺLĹ") @@ -437,5 +436,3 @@ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačovanie...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračovanie...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_SK_UTF_H diff --git a/Marlin/src/lcd/language/language_test.h b/Marlin/src/lcd/language/language_test.h index 32805f11a3..dfc31953fb 100644 --- a/Marlin/src/lcd/language/language_test.h +++ b/Marlin/src/lcd/language/language_test.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * TEST @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_TEST_H -#define LANGUAGE_TEST_H // Select ONE of the following Mappers. // They decide what to do with a symbol in the area of [0x80:0xFF]. They take a symbol of this language file and make them point @@ -226,5 +225,3 @@ #define MSG_PID_P STRG_OKTAL_e #define MSG_PID_I STRG_OKTAL_f #endif - -#endif // LANGUAGE_TEST_H diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index b6b5b817cb..46e0805754 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Turkish @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_TR_H -#define LANGUAGE_TR_H #define DISPLAY_CHARSET_ISO10646_TR #define CHARSIZE 2 @@ -266,5 +265,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Yüklüyor...") // Yüklüyor... #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Sürdürülüyor...") // Sürdürülüyor... #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_TR_H diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h index 98dbfad4d5..8030f3da44 100644 --- a/Marlin/src/lcd/language/language_uk.h +++ b/Marlin/src/lcd/language/language_uk.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Ukrainian @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_UK_H -#define LANGUAGE_UK_H #define DISPLAY_CHARSET_ISO10646_5 #define CHARSIZE 2 @@ -240,5 +239,3 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ввід...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Відновлення...") #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_UK_H diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index 16c932032b..39a407168b 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Simplified Chinese @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_ZH_CN_H -#define LANGUAGE_ZH_CN_H #define CHARSIZE 3 @@ -384,5 +383,3 @@ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..." #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..." #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_ZH_CN_H diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index ff2d690650..f780cbe043 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Traditional Chinese @@ -27,8 +28,6 @@ * See also http://marlinfw.org/docs/development/lcd_language.html * */ -#ifndef LANGUAGE_ZH_TW_H -#define LANGUAGE_ZH_TW_H #define CHARSIZE 3 @@ -384,5 +383,3 @@ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..." #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢復中 ...") //"Resuming..." #endif // LCD_HEIGHT < 4 - -#endif // LANGUAGE_ZH_TW_H diff --git a/Marlin/src/libs/buzzer.h b/Marlin/src/libs/buzzer.h index 2da9b8dee7..2a150e267c 100644 --- a/Marlin/src/libs/buzzer.h +++ b/Marlin/src/libs/buzzer.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __BUZZER_H__ -#define __BUZZER_H__ +#pragma once #include "../inc/MarlinConfig.h" @@ -123,5 +121,3 @@ class Buzzer { #define BUZZ(d,f) NOOP #endif - -#endif diff --git a/Marlin/src/libs/circularqueue.h b/Marlin/src/libs/circularqueue.h index d10e79bac9..1cd051c2fa 100644 --- a/Marlin/src/libs/circularqueue.h +++ b/Marlin/src/libs/circularqueue.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __CIRCULARQUEUE_H__ -#define __CIRCULARQUEUE_H__ +#pragma once #include @@ -141,5 +139,3 @@ class CircularQueue { return this->buffer.count; } }; - -#endif diff --git a/Marlin/src/libs/hex_print_routines.h b/Marlin/src/libs/hex_print_routines.h index 859b79fe31..2033e5670b 100644 --- a/Marlin/src/libs/hex_print_routines.h +++ b/Marlin/src/libs/hex_print_routines.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef HEX_PRINT_ROUTINES_H -#define HEX_PRINT_ROUTINES_H +#pragma once #include @@ -46,5 +44,3 @@ void print_hex_address(const void * const w); #else typedef uint16_t ptr_int_t; #endif - -#endif // HEX_PRINT_ROUTINES_H diff --git a/Marlin/src/libs/least_squares_fit.h b/Marlin/src/libs/least_squares_fit.h index cbd42d2c6b..02ed9cfbd9 100644 --- a/Marlin/src/libs/least_squares_fit.h +++ b/Marlin/src/libs/least_squares_fit.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Incremental Least Squares Best Fit By Roxy and Ed Williams @@ -32,9 +33,6 @@ * */ -#ifndef _LEAST_SQUARES_FIT_H_ -#define _LEAST_SQUARES_FIT_H_ - #include "../inc/MarlinConfig.h" #include @@ -83,5 +81,3 @@ void inline incremental_LSF(struct linear_fit_data *lsf, const float &x, const f } int finish_incremental_LSF(struct linear_fit_data *); - -#endif // _LEAST_SQUARES_FIT_H_ diff --git a/Marlin/src/libs/nozzle.h b/Marlin/src/libs/nozzle.h index 3adf6f3ac8..5e56618e3f 100644 --- a/Marlin/src/libs/nozzle.h +++ b/Marlin/src/libs/nozzle.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __NOZZLE_H__ -#define __NOZZLE_H__ +#pragma once #include "../inc/MarlinConfig.h" #include "point_t.h" @@ -90,5 +88,3 @@ class Nozzle { #endif }; - -#endif // __NOZZLE_H__ diff --git a/Marlin/src/libs/private_spi.h b/Marlin/src/libs/private_spi.h index 7998de7bea..89c591a2a4 100644 --- a/Marlin/src/libs/private_spi.h +++ b/Marlin/src/libs/private_spi.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef __PRIVATE_SPI_H__ -#define __PRIVATE_SPI_H__ +#pragma once #include "softspi.h" #include @@ -53,5 +51,3 @@ class SPIclass { } }; - -#endif // __PRIVATE_SPI_H__ diff --git a/Marlin/src/libs/stopwatch.h b/Marlin/src/libs/stopwatch.h index 358f636ca2..c1e9ea74f8 100644 --- a/Marlin/src/libs/stopwatch.h +++ b/Marlin/src/libs/stopwatch.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef STOPWATCH_H -#define STOPWATCH_H +#pragma once // Print debug messages with M111 S2 (Uses 156 bytes of PROGMEM) //#define DEBUG_STOPWATCH @@ -116,5 +114,3 @@ class Stopwatch { #endif }; - -#endif // STOPWATCH_H diff --git a/Marlin/src/module/configuration_store.h b/Marlin/src/module/configuration_store.h index 1d4862c353..88f36a492f 100644 --- a/Marlin/src/module/configuration_store.h +++ b/Marlin/src/module/configuration_store.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef CONFIGURATION_STORE_H -#define CONFIGURATION_STORE_H +#pragma once #include "../inc/MarlinConfig.h" @@ -120,5 +118,3 @@ extern MarlinSettings settings; #undef PORTINIT_SOLO #undef PORTINIT_AFTER - -#endif // CONFIGURATION_STORE_H diff --git a/Marlin/src/module/endstops.h b/Marlin/src/module/endstops.h index f4c9181e93..f73c17946f 100644 --- a/Marlin/src/module/endstops.h +++ b/Marlin/src/module/endstops.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * endstops.h - manages endstops */ -#ifndef __ENDSTOPS_H__ -#define __ENDSTOPS_H__ - #include "../inc/MarlinConfig.h" #include @@ -173,5 +171,3 @@ class Endstops { }; extern Endstops endstops; - -#endif // __ENDSTOPS_H__ diff --git a/Marlin/src/module/planner_bezier.h b/Marlin/src/module/planner_bezier.h index 7e4ea23657..ec4031f155 100644 --- a/Marlin/src/module/planner_bezier.h +++ b/Marlin/src/module/planner_bezier.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * planner_bezier.h @@ -27,10 +28,8 @@ * */ -#ifndef PLANNER_BEZIER_H -#define PLANNER_BEZIER_H - -#include "../inc/MarlinConfig.h" +#include +#include "../core/macros.h" void cubic_b_spline( const float position[NUM_AXIS], // current position @@ -39,5 +38,3 @@ void cubic_b_spline( float fr_mm_s, uint8_t extruder ); - -#endif // PLANNER_BEZIER_H diff --git a/Marlin/src/module/printcounter.h b/Marlin/src/module/printcounter.h index 461c689e51..ce3fd05b3c 100644 --- a/Marlin/src/module/printcounter.h +++ b/Marlin/src/module/printcounter.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef PRINTCOUNTER_H -#define PRINTCOUNTER_H +#pragma once #include "../libs/stopwatch.h" #include "../libs/duration_t.h" @@ -193,5 +191,3 @@ class PrintCounter: public Stopwatch { #else extern Stopwatch print_job_timer; #endif - -#endif // PRINTCOUNTER_H diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h index f81482dcec..830911a6ba 100644 --- a/Marlin/src/module/probe.h +++ b/Marlin/src/module/probe.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * probe.h - Move, deploy, enable, etc. */ -#ifndef PROBE_H -#define PROBE_H - #include "../inc/MarlinConfig.h" #if HAS_BED_PROBE @@ -73,5 +71,3 @@ set_bltouch_deployed(false); } #endif - -#endif // PROBE_H diff --git a/Marlin/src/module/servo.h b/Marlin/src/module/servo.h index 04582431dd..7dc70559c7 100644 --- a/Marlin/src/module/servo.h +++ b/Marlin/src/module/servo.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * module/servo.h */ -#ifndef _SERVO_H_ -#define _SERVO_H_ - #include "../inc/MarlinConfig.h" #include "../HAL/shared/servo.h" @@ -40,5 +38,3 @@ extern void servo_init(); #define DEPLOY_Z_SERVO() MOVE_SERVO(Z_PROBE_SERVO_NR, servo_angles[Z_PROBE_SERVO_NR][0]) #define STOW_Z_SERVO() MOVE_SERVO(Z_PROBE_SERVO_NR, servo_angles[Z_PROBE_SERVO_NR][1]) #endif - -#endif // _SERVO_H_ diff --git a/Marlin/src/module/speed_lookuptable.h b/Marlin/src/module/speed_lookuptable.h index c251a7ffc1..ade4e01bd4 100644 --- a/Marlin/src/module/speed_lookuptable.h +++ b/Marlin/src/module/speed_lookuptable.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef SPEED_LOOKUPTABLE_H -#define SPEED_LOOKUPTABLE_H +#pragma once #if F_CPU == 16000000 @@ -168,5 +166,3 @@ }; #endif - -#endif // SPEED_LOOKUPTABLE_H diff --git a/Marlin/src/module/stepper.h b/Marlin/src/module/stepper.h index 6304b0c503..5f7cdc54cc 100644 --- a/Marlin/src/module/stepper.h +++ b/Marlin/src/module/stepper.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * stepper.h - stepper motor driver: executes motion plans of planner.c using the stepper motors @@ -40,9 +41,6 @@ * along with Grbl. If not, see . */ -#ifndef STEPPER_H -#define STEPPER_H - #include "../inc/MarlinConfig.h" // Disable multiple steps per ISR @@ -559,5 +557,3 @@ class Stepper { }; extern Stepper stepper; - -#endif // STEPPER_H diff --git a/Marlin/src/module/stepper_indirection.h b/Marlin/src/module/stepper_indirection.h index 0ca6aac9c6..1b0e6c883d 100644 --- a/Marlin/src/module/stepper_indirection.h +++ b/Marlin/src/module/stepper_indirection.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * stepper_indirection.h - stepper motor driver indirection macros @@ -41,9 +42,6 @@ * along with Marlin. If not, see . */ -#ifndef STEPPER_INDIRECTION_H -#define STEPPER_INDIRECTION_H - #include "../inc/MarlinConfig.h" // TMC26X drivers have STEP/DIR on normal pins, but ENABLE via SPI @@ -615,5 +613,3 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define NORM_E_DIR(E) E0_DIR_WRITE(!INVERT_E0_DIR) #define REV_E_DIR(E) E0_DIR_WRITE( INVERT_E0_DIR) #endif - -#endif // STEPPER_INDIRECTION_H diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 6baeacf24c..7c56105552 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -19,14 +19,12 @@ * along with this program. If not, see . * */ +#pragma once /** * temperature.h - temperature controller */ -#ifndef TEMPERATURE_H -#define TEMPERATURE_H - #include "thermistor/thermistors.h" #include "../inc/MarlinConfig.h" @@ -660,5 +658,3 @@ class Temperature { }; extern Temperature thermalManager; - -#endif // TEMPERATURE_H diff --git a/Marlin/src/module/thermistor/thermistor_1010.h b/Marlin/src/module/thermistor/thermistor_1010.h index 79a557954e..863a92fff8 100644 --- a/Marlin/src/module/thermistor/thermistor_1010.h +++ b/Marlin/src/module/thermistor/thermistor_1010.h @@ -22,17 +22,17 @@ // Pt1000 with 1k0 pullup const short temptable_1010[][2] PROGMEM = { - PtLine( 0, 1000, 1000) - PtLine( 25, 1000, 1000) - PtLine( 50, 1000, 1000) - PtLine( 75, 1000, 1000) - PtLine(100, 1000, 1000) - PtLine(125, 1000, 1000) - PtLine(150, 1000, 1000) - PtLine(175, 1000, 1000) - PtLine(200, 1000, 1000) - PtLine(225, 1000, 1000) - PtLine(250, 1000, 1000) - PtLine(275, 1000, 1000) + PtLine( 0, 1000, 1000), + PtLine( 25, 1000, 1000), + PtLine( 50, 1000, 1000), + PtLine( 75, 1000, 1000), + PtLine(100, 1000, 1000), + PtLine(125, 1000, 1000), + PtLine(150, 1000, 1000), + PtLine(175, 1000, 1000), + PtLine(200, 1000, 1000), + PtLine(225, 1000, 1000), + PtLine(250, 1000, 1000), + PtLine(275, 1000, 1000), PtLine(300, 1000, 1000) }; diff --git a/Marlin/src/module/thermistor/thermistor_1047.h b/Marlin/src/module/thermistor/thermistor_1047.h index 01997abc3a..b4c69f5803 100644 --- a/Marlin/src/module/thermistor/thermistor_1047.h +++ b/Marlin/src/module/thermistor/thermistor_1047.h @@ -23,11 +23,11 @@ // Pt1000 with 4k7 pullup const short temptable_1047[][2] PROGMEM = { // only a few values are needed as the curve is very flat - PtLine( 0, 1000, 4700) - PtLine( 50, 1000, 4700) - PtLine(100, 1000, 4700) - PtLine(150, 1000, 4700) - PtLine(200, 1000, 4700) - PtLine(250, 1000, 4700) + PtLine( 0, 1000, 4700), + PtLine( 50, 1000, 4700), + PtLine(100, 1000, 4700), + PtLine(150, 1000, 4700), + PtLine(200, 1000, 4700), + PtLine(250, 1000, 4700), PtLine(300, 1000, 4700) }; diff --git a/Marlin/src/module/thermistor/thermistor_110.h b/Marlin/src/module/thermistor/thermistor_110.h index 7a4c80df71..5a5d387d4d 100644 --- a/Marlin/src/module/thermistor/thermistor_110.h +++ b/Marlin/src/module/thermistor/thermistor_110.h @@ -23,11 +23,11 @@ // Pt100 with 1k0 pullup const short temptable_110[][2] PROGMEM = { // only a few values are needed as the curve is very flat - PtLine( 0, 100, 1000) - PtLine( 50, 100, 1000) - PtLine(100, 100, 1000) - PtLine(150, 100, 1000) - PtLine(200, 100, 1000) - PtLine(250, 100, 1000) + PtLine( 0, 100, 1000), + PtLine( 50, 100, 1000), + PtLine(100, 100, 1000), + PtLine(150, 100, 1000), + PtLine(200, 100, 1000), + PtLine(250, 100, 1000), PtLine(300, 100, 1000) }; diff --git a/Marlin/src/module/thermistor/thermistor_147.h b/Marlin/src/module/thermistor/thermistor_147.h index 7e4a3b6fb6..22fe8a8e76 100644 --- a/Marlin/src/module/thermistor/thermistor_147.h +++ b/Marlin/src/module/thermistor/thermistor_147.h @@ -23,11 +23,11 @@ // Pt100 with 4k7 pullup const short temptable_147[][2] PROGMEM = { // only a few values are needed as the curve is very flat - PtLine( 0, 100, 4700) - PtLine( 50, 100, 4700) - PtLine(100, 100, 4700) - PtLine(150, 100, 4700) - PtLine(200, 100, 4700) - PtLine(250, 100, 4700) + PtLine( 0, 100, 4700), + PtLine( 50, 100, 4700), + PtLine(100, 100, 4700), + PtLine(150, 100, 4700), + PtLine(200, 100, 4700), + PtLine(250, 100, 4700), PtLine(300, 100, 4700) }; diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index 56b75e1739..953fdf7fea 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -19,9 +19,7 @@ * along with this program. If not, see . * */ - -#ifndef THERMISTORS_H_ -#define THERMISTORS_H_ +#pragma once #include "../../inc/MarlinConfig.h" @@ -36,9 +34,9 @@ // a=3.9083E-3, b=-5.775E-7 #define PtA 3.9083E-3 #define PtB -5.775E-7 -#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T))) -#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1)) -#define PtLine(T,R0,Rup) { OV(PtAdVal(T,R0,Rup)), T }, +#define PtRt(T,R0) ((R0) * (1.0 + (PtA) * (T) + (PtB) * (T) * (T))) +#define PtAdVal(T,R0,Rup) (short)(1024 / (Rup / PtRt(T, R0) + 1)) +#define PtLine(T,R0,Rup) { OV(PtAdVal(T, R0, Rup)), T } #if ANY_THERMISTOR_IS(1) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "EPCOS" #include "thermistor_1.h" @@ -276,5 +274,3 @@ static_assert(HEATER_0_TEMPTABLE_LEN < 256 && HEATER_1_TEMPTABLE_LEN < 256 && HE #define HEATER_CHAMBER_RAW_LO_TEMP 0 #endif #endif - -#endif // THERMISTORS_H_ diff --git a/Marlin/src/sd/Sd2Card.h b/Marlin/src/sd/Sd2Card.h index d6d9af18ba..8f14073df8 100644 --- a/Marlin/src/sd/Sd2Card.h +++ b/Marlin/src/sd/Sd2Card.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * \file @@ -31,8 +32,6 @@ * * This file is part of the Arduino Sd2Card Library */ -#ifndef _SD2CARD_H_ -#define _SD2CARD_H_ #include "SdFatConfig.h" #include "SdInfo.h" @@ -202,5 +201,3 @@ class Sd2Card { bool waitNotBusy(const millis_t timeout_ms); bool writeData(uint8_t token, const uint8_t* src); }; - -#endif // _SD2CARD_H_ diff --git a/Marlin/src/sd/SdBaseFile.h b/Marlin/src/sd/SdBaseFile.h index d8139d20c0..8fa91a650f 100644 --- a/Marlin/src/sd/SdBaseFile.h +++ b/Marlin/src/sd/SdBaseFile.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * \file @@ -31,9 +32,6 @@ * * This file is part of the Arduino Sd2Card Library */ -#ifndef _SDBASEFILE_H_ -#define _SDBASEFILE_H_ - #include "SdFatConfig.h" #include "SdVolume.h" @@ -387,5 +385,3 @@ class SdBaseFile { bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags); dir_t* readDirCache(); }; - -#endif // _SDBASEFILE_H_ diff --git a/Marlin/src/sd/SdFatConfig.h b/Marlin/src/sd/SdFatConfig.h index d2c769a014..d203aa38ae 100644 --- a/Marlin/src/sd/SdFatConfig.h +++ b/Marlin/src/sd/SdFatConfig.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * SdFatConfig.h @@ -28,12 +29,8 @@ * This file is part of the Arduino Sd2Card Library */ -#ifndef _SDFATCONFIG_H_ -#define _SDFATCONFIG_H_ - #include "../inc/MarlinConfig.h" - /** * To use multiple SD cards set USE_MULTIPLE_CARDS nonzero. * @@ -113,5 +110,3 @@ // Total bytes needed to store a single long filename #define LONG_FILENAME_LENGTH (FILENAME_LENGTH * MAX_VFAT_ENTRIES + 1) - -#endif // _SDFATCONFIG_H_ diff --git a/Marlin/src/sd/SdFatStructs.h b/Marlin/src/sd/SdFatStructs.h index 7b84b1ad0c..eaf7a03ea3 100644 --- a/Marlin/src/sd/SdFatStructs.h +++ b/Marlin/src/sd/SdFatStructs.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * \file @@ -31,8 +32,6 @@ * * This file is part of the Arduino Sd2Card Library */ -#ifndef SDFATSTRUCTS_H -#define SDFATSTRUCTS_H #include @@ -613,5 +612,3 @@ static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) { static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) { return (dir->attributes & DIR_ATT_VOLUME_ID) == 0; } - -#endif // SDFATSTRUCTS_H diff --git a/Marlin/src/sd/SdFatUtil.cpp b/Marlin/src/sd/SdFatUtil.cpp index 1110d1dc9c..b06ee74a5d 100644 --- a/Marlin/src/sd/SdFatUtil.cpp +++ b/Marlin/src/sd/SdFatUtil.cpp @@ -32,6 +32,7 @@ #if ENABLED(SDSUPPORT) #include "SdFatUtil.h" +#include /** * Amount of free RAM diff --git a/Marlin/src/sd/SdFatUtil.h b/Marlin/src/sd/SdFatUtil.h index 1deb1eb8f3..e510ee8e13 100644 --- a/Marlin/src/sd/SdFatUtil.h +++ b/Marlin/src/sd/SdFatUtil.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Arduino SdFat Library @@ -26,10 +27,6 @@ * * This file is part of the Arduino Sd2Card Library */ -#ifndef _SDFATUTIL_H_ -#define _SDFATUTIL_H_ - -#include /** * \file @@ -41,5 +38,3 @@ namespace SdFatUtil { } using namespace SdFatUtil; // NOLINT - -#endif // _SDFATUTIL_H_ diff --git a/Marlin/src/sd/SdFile.h b/Marlin/src/sd/SdFile.h index dd250110a1..e555797c75 100644 --- a/Marlin/src/sd/SdFile.h +++ b/Marlin/src/sd/SdFile.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * \file @@ -31,8 +32,6 @@ * * This file is part of the Arduino Sd2Card Library */ -#ifndef _SDFILE_H_ -#define _SDFILE_H_ #include "SdBaseFile.h" @@ -58,5 +57,3 @@ class SdFile : public SdBaseFile/*, public Print*/ { void write_P(PGM_P str); void writeln_P(PGM_P str); }; - -#endif // _SDFILE_H_ diff --git a/Marlin/src/sd/SdInfo.h b/Marlin/src/sd/SdInfo.h index 91cb35da9e..62a445d06d 100644 --- a/Marlin/src/sd/SdInfo.h +++ b/Marlin/src/sd/SdInfo.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * Arduino Sd2Card Library @@ -26,8 +27,6 @@ * * This file is part of the Arduino Sd2Card Library */ -#ifndef _SDINFO_H_ -#define _SDINFO_H_ #include @@ -264,5 +263,3 @@ union csd_t { csd1_t v1; csd2_t v2; }; - -#endif // _SDINFO_H_ diff --git a/Marlin/src/sd/SdVolume.h b/Marlin/src/sd/SdVolume.h index 697d0b4933..0f3839362f 100644 --- a/Marlin/src/sd/SdVolume.h +++ b/Marlin/src/sd/SdVolume.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * \file @@ -31,8 +32,6 @@ * * This file is part of the Arduino Sd2Card Library */ -#ifndef _SDVOLUME_H_ -#define _SDVOLUME_H_ #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #include "usb_flashdrive/Sd2Card_FlashDrive.h" @@ -195,5 +194,3 @@ class SdVolume { bool readBlock(uint32_t block, uint8_t* dst) { return sdCard_->readBlock(block, dst); } bool writeBlock(uint32_t block, const uint8_t* dst) { return sdCard_->writeBlock(block, dst); } }; - -#endif // _SDVOLUME_H_ diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h index 3b5a5fcba3..ee044a19b6 100644 --- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h +++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h @@ -19,15 +19,13 @@ * along with this program. If not, see . * */ +#pragma once /** * \file * \brief Sd2Card class for V2 SD/SDHC cards */ -#ifndef _SD2CARD_FLASHDRIVE_H_ -#define _SD2CARD_FLASHDRIVE_H_ - /* Uncomment USB_DEBUG to enable debugging. * 1 - basic debugging and bounds checking * 2 - print each block access @@ -99,5 +97,3 @@ class Sd2Card { uint32_t cardSize(); static bool isInserted(); }; - -#endif // _SD2CARD_FLASHDRIVE_H_ diff --git a/Marlin/src/sd/usb_flashdrive/lib/UsbCore.h b/Marlin/src/sd/usb_flashdrive/lib/UsbCore.h index 74f7b40d80..5bd60a6803 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/UsbCore.h +++ b/Marlin/src/sd/usb_flashdrive/lib/UsbCore.h @@ -26,8 +26,7 @@ e-mail : support@circuitsathome.com #error "Never include UsbCore.h directly; include Usb.h instead" #endif -#ifndef USBCORE_H -#define USBCORE_H +#pragma once // Not used anymore? If anyone uses this, please let us know so that this may be // moved to the proper place, settings.h. @@ -137,68 +136,68 @@ typedef MAX3421e MAX3421E; // Official Arduinos (UNO, Duemilanove, Mega class USBDeviceConfig { public: - virtual uint8_t Init(uint8_t parent __attribute__((unused)), uint8_t port __attribute__((unused)), bool lowspeed __attribute__((unused))) { - return 0; - } + virtual uint8_t Init(uint8_t parent __attribute__((unused)), uint8_t port __attribute__((unused)), bool lowspeed __attribute__((unused))) { + return 0; + } - virtual uint8_t ConfigureDevice(uint8_t parent __attribute__((unused)), uint8_t port __attribute__((unused)), bool lowspeed __attribute__((unused))) { - return 0; - } + virtual uint8_t ConfigureDevice(uint8_t parent __attribute__((unused)), uint8_t port __attribute__((unused)), bool lowspeed __attribute__((unused))) { + return 0; + } - virtual uint8_t Release() { - return 0; - } + virtual uint8_t Release() { + return 0; + } - virtual uint8_t Poll() { - return 0; - } + virtual uint8_t Poll() { + return 0; + } - virtual uint8_t GetAddress() { - return 0; - } + virtual uint8_t GetAddress() { + return 0; + } - virtual void ResetHubPort(uint8_t port __attribute__((unused))) { - return; - } // Note used for hubs only! + virtual void ResetHubPort(uint8_t port __attribute__((unused))) { + return; + } // Note used for hubs only! - virtual bool VIDPIDOK(uint16_t vid __attribute__((unused)), uint16_t pid __attribute__((unused))) { - return false; - } + virtual bool VIDPIDOK(uint16_t vid __attribute__((unused)), uint16_t pid __attribute__((unused))) { + return false; + } - virtual bool DEVCLASSOK(uint8_t klass __attribute__((unused))) { - return false; - } + virtual bool DEVCLASSOK(uint8_t klass __attribute__((unused))) { + return false; + } - virtual bool DEVSUBCLASSOK(uint8_t subklass __attribute__((unused))) { - return true; - } + virtual bool DEVSUBCLASSOK(uint8_t subklass __attribute__((unused))) { + return true; + } }; /* USB Setup Packet Structure */ typedef struct { - union { // offset description - uint8_t bmRequestType; // 0 Bit-map of request type - - struct { - uint8_t recipient : 5; // Recipient of the request - uint8_t type : 2; // Type of request - uint8_t direction : 1; // Direction of data X-fer - } __attribute__((packed)); - } ReqType_u; - uint8_t bRequest; // 1 Request - - union { - uint16_t wValue; // 2 Depends on bRequest - - struct { - uint8_t wValueLo; - uint8_t wValueHi; - } __attribute__((packed)); - } wVal_u; - uint16_t wIndex; // 4 Depends on bRequest - uint16_t wLength; // 6 Depends on bRequest + union { // offset description + uint8_t bmRequestType; // 0 Bit-map of request type + + struct { + uint8_t recipient : 5; // Recipient of the request + uint8_t type : 2; // Type of request + uint8_t direction : 1; // Direction of data X-fer + } __attribute__((packed)); + } ReqType_u; + uint8_t bRequest; // 1 Request + + union { + uint16_t wValue; // 2 Depends on bRequest + + struct { + uint8_t wValueLo; + uint8_t wValueHi; + } __attribute__((packed)); + } wVal_u; + uint16_t wIndex; // 4 Depends on bRequest + uint16_t wLength; // 6 Depends on bRequest } __attribute__((packed)) SETUP_PKT, *PSETUP_PKT; @@ -207,108 +206,106 @@ typedef struct { class USBReadParser { public: - virtual void Parse(const uint16_t len, const uint8_t *pbuf, const uint16_t &offset) = 0; + virtual void Parse(const uint16_t len, const uint8_t *pbuf, const uint16_t &offset) = 0; }; class USB : public MAX3421E { - AddressPoolImpl addrPool; - USBDeviceConfig* devConfig[USB_NUMDEVICES]; - uint8_t bmHubPre; + AddressPoolImpl addrPool; + USBDeviceConfig* devConfig[USB_NUMDEVICES]; + uint8_t bmHubPre; public: - USB(void); - - void SetHubPreMask() { - bmHubPre |= bmHUBPRE; - }; - - void ResetHubPreMask() { - bmHubPre &= (~bmHUBPRE); - }; - - AddressPool& GetAddressPool() { - return (AddressPool&)addrPool; - }; - - uint8_t RegisterDeviceClass(USBDeviceConfig *pdev) { - for(uint8_t i = 0; i < USB_NUMDEVICES; i++) { - if(!devConfig[i]) { - devConfig[i] = pdev; - return 0; - } - } - return USB_ERROR_UNABLE_TO_REGISTER_DEVICE_CLASS; - }; - - void ForEachUsbDevice(UsbDeviceHandleFunc pfunc) { - addrPool.ForEachUsbDevice(pfunc); - }; - uint8_t getUsbTaskState(void); - void setUsbTaskState(uint8_t state); - - EpInfo* getEpInfoEntry(uint8_t addr, uint8_t ep); - uint8_t setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr); - - /* Control requests */ - uint8_t getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr); - uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr); - - uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p); - - uint8_t getStrDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t* dataptr); - uint8_t setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr); - uint8_t setConf(uint8_t addr, uint8_t ep, uint8_t conf_value); - /**/ - uint8_t ctrlData(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr, bool direction); - uint8_t ctrlStatus(uint8_t ep, bool direction, uint16_t nak_limit); - uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data, uint8_t bInterval = 0); - uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data); - uint8_t dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit); - - void Task(void); - - uint8_t DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed); - uint8_t Configuring(uint8_t parent, uint8_t port, bool lowspeed); - uint8_t ReleaseDevice(uint8_t addr); - - uint8_t ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi, - uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p); + USB(void); + + void SetHubPreMask() { + bmHubPre |= bmHUBPRE; + }; + + void ResetHubPreMask() { + bmHubPre &= (~bmHUBPRE); + }; + + AddressPool& GetAddressPool() { + return (AddressPool&)addrPool; + }; + + uint8_t RegisterDeviceClass(USBDeviceConfig *pdev) { + for(uint8_t i = 0; i < USB_NUMDEVICES; i++) { + if(!devConfig[i]) { + devConfig[i] = pdev; + return 0; + } + } + return USB_ERROR_UNABLE_TO_REGISTER_DEVICE_CLASS; + }; + + void ForEachUsbDevice(UsbDeviceHandleFunc pfunc) { + addrPool.ForEachUsbDevice(pfunc); + }; + uint8_t getUsbTaskState(void); + void setUsbTaskState(uint8_t state); + + EpInfo* getEpInfoEntry(uint8_t addr, uint8_t ep); + uint8_t setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr); + + /* Control requests */ + uint8_t getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr); + uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr); + + uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p); + + uint8_t getStrDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t* dataptr); + uint8_t setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr); + uint8_t setConf(uint8_t addr, uint8_t ep, uint8_t conf_value); + /**/ + uint8_t ctrlData(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr, bool direction); + uint8_t ctrlStatus(uint8_t ep, bool direction, uint16_t nak_limit); + uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data, uint8_t bInterval = 0); + uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data); + uint8_t dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit); + + void Task(void); + + uint8_t DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed); + uint8_t Configuring(uint8_t parent, uint8_t port, bool lowspeed); + uint8_t ReleaseDevice(uint8_t addr); + + uint8_t ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi, + uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p); private: - void init(); - uint8_t SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t *nak_limit); - uint8_t OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data); - uint8_t InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t *data, uint8_t bInterval = 0); - uint8_t AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lowspeed); + void init(); + uint8_t SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t *nak_limit); + uint8_t OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data); + uint8_t InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t *data, uint8_t bInterval = 0); + uint8_t AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lowspeed); }; #if 0 //defined(USB_METHODS_INLINE) //get device descriptor inline uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) { - return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, dataptr)); + return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, dataptr)); } //get configuration descriptor inline uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) { - return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, dataptr)); + return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, dataptr)); } //get string descriptor inline uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t nuint8_ts, uint8_t index, uint16_t langid, uint8_t* dataptr) { - return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, nuint8_ts, dataptr)); + return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, nuint8_ts, dataptr)); } //set address inline uint8_t USB::setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr) { - return ( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, NULL)); + return ( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, NULL)); } //set configuration inline uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) { - return ( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, NULL)); + return ( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, NULL)); } #endif // defined(USB_METHODS_INLINE) - -#endif /* USBCORE_H */ diff --git a/Marlin/src/sd/usb_flashdrive/lib/macros.h b/Marlin/src/sd/usb_flashdrive/lib/macros.h index 6df44e1c36..f5517904ca 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/macros.h +++ b/Marlin/src/sd/usb_flashdrive/lib/macros.h @@ -26,8 +26,7 @@ e-mail : support@circuitsathome.com #error "Never include macros.h directly; include Usb.h instead" #endif -#ifndef MACROS_H -#define MACROS_H +#pragma once //////////////////////////////////////////////////////////////////////////////// // HANDY MACROS @@ -85,5 +84,3 @@ e-mail : support@circuitsathome.com #define USBTRACE1(s,l) (Notify(PSTR(s), l)) #define USBTRACE2(s,r) (Notify(PSTR(s), 0x80), D_PrintHex((r), 0x80), Notify(PSTR("\r\n"), 0x80)) #define USBTRACE3(s,r,l) (Notify(PSTR(s), l), D_PrintHex((r), l), Notify(PSTR("\r\n"), l)) - -#endif /* MACROS_H */ diff --git a/Marlin/src/sd/usb_flashdrive/lib/masstorage.h b/Marlin/src/sd/usb_flashdrive/lib/masstorage.h index e2cc1887c7..672f55b250 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/masstorage.h +++ b/Marlin/src/sd/usb_flashdrive/lib/masstorage.h @@ -22,12 +22,11 @@ Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ -#if !defined(__MASSTORAGE_H__) -#define __MASSTORAGE_H__ +#pragma once // Cruft removal, makes driver smaller, faster. #ifndef MS_WANT_PARSER -#define MS_WANT_PARSER 0 + #define MS_WANT_PARSER 0 #endif #include "Usb.h" @@ -184,395 +183,394 @@ e-mail : support@circuitsathome.com #define MASS_MAX_ENDPOINTS 3 struct Capacity { - uint8_t data[8]; - //uint32_t dwBlockAddress; - //uint32_t dwBlockLength; + uint8_t data[8]; + //uint32_t dwBlockAddress; + //uint32_t dwBlockLength; } __attribute__((packed)); struct BASICCDB { - uint8_t Opcode; + uint8_t Opcode; - unsigned unused : 5; - unsigned LUN : 3; + unsigned unused : 5; + unsigned LUN : 3; - uint8_t info[12]; + uint8_t info[12]; } __attribute__((packed)); typedef BASICCDB BASICCDB_t; struct CDB6 { - uint8_t Opcode; + uint8_t Opcode; - unsigned LBAMSB : 5; - unsigned LUN : 3; + unsigned LBAMSB : 5; + unsigned LUN : 3; - uint8_t LBAHB; - uint8_t LBALB; - uint8_t AllocationLength; - uint8_t Control; + uint8_t LBAHB; + uint8_t LBALB; + uint8_t AllocationLength; + uint8_t Control; public: - CDB6(uint8_t _Opcode, uint8_t _LUN, uint32_t LBA, uint8_t _AllocationLength, uint8_t _Control) : - Opcode(_Opcode), LBAMSB(BGRAB2(LBA) & 0x1f), LUN(_LUN), LBAHB(BGRAB1(LBA)), LBALB(BGRAB0(LBA)), - AllocationLength(_AllocationLength), Control(_Control) { - } + CDB6(uint8_t _Opcode, uint8_t _LUN, uint32_t LBA, uint8_t _AllocationLength, uint8_t _Control) : + Opcode(_Opcode), LBAMSB(BGRAB2(LBA) & 0x1f), LUN(_LUN), LBAHB(BGRAB1(LBA)), LBALB(BGRAB0(LBA)), + AllocationLength(_AllocationLength), Control(_Control) { + } - CDB6(uint8_t _Opcode, uint8_t _LUN, uint8_t _AllocationLength, uint8_t _Control) : - Opcode(_Opcode), LBAMSB(0), LUN(_LUN), LBAHB(0), LBALB(0), - AllocationLength(_AllocationLength), Control(_Control) { - } + CDB6(uint8_t _Opcode, uint8_t _LUN, uint8_t _AllocationLength, uint8_t _Control) : + Opcode(_Opcode), LBAMSB(0), LUN(_LUN), LBAHB(0), LBALB(0), + AllocationLength(_AllocationLength), Control(_Control) { + } } __attribute__((packed)); typedef CDB6 CDB6_t; struct CDB10 { - uint8_t Opcode; + uint8_t Opcode; - unsigned Service_Action : 5; - unsigned LUN : 3; + unsigned Service_Action : 5; + unsigned LUN : 3; - uint8_t LBA_L_M_MB; - uint8_t LBA_L_M_LB; - uint8_t LBA_L_L_MB; - uint8_t LBA_L_L_LB; + uint8_t LBA_L_M_MB; + uint8_t LBA_L_M_LB; + uint8_t LBA_L_L_MB; + uint8_t LBA_L_L_LB; - uint8_t Misc2; + uint8_t Misc2; - uint8_t ALC_MB; - uint8_t ALC_LB; + uint8_t ALC_MB; + uint8_t ALC_LB; - uint8_t Control; + uint8_t Control; public: - CDB10(uint8_t _Opcode, uint8_t _LUN) : - Opcode(_Opcode), Service_Action(0), LUN(_LUN), - LBA_L_M_MB(0), LBA_L_M_LB(0), LBA_L_L_MB(0), LBA_L_L_LB(0), - Misc2(0), ALC_MB(0), ALC_LB(0), Control(0) { - } - - CDB10(uint8_t _Opcode, uint8_t _LUN, uint16_t xflen, uint32_t _LBA) : - Opcode(_Opcode), Service_Action(0), LUN(_LUN), - LBA_L_M_MB(BGRAB3(_LBA)), LBA_L_M_LB(BGRAB2(_LBA)), LBA_L_L_MB(BGRAB1(_LBA)), LBA_L_L_LB(BGRAB0(_LBA)), - Misc2(0), ALC_MB(BGRAB1(xflen)), ALC_LB(BGRAB0(xflen)), Control(0) { - } + CDB10(uint8_t _Opcode, uint8_t _LUN) : + Opcode(_Opcode), Service_Action(0), LUN(_LUN), + LBA_L_M_MB(0), LBA_L_M_LB(0), LBA_L_L_MB(0), LBA_L_L_LB(0), + Misc2(0), ALC_MB(0), ALC_LB(0), Control(0) { + } + + CDB10(uint8_t _Opcode, uint8_t _LUN, uint16_t xflen, uint32_t _LBA) : + Opcode(_Opcode), Service_Action(0), LUN(_LUN), + LBA_L_M_MB(BGRAB3(_LBA)), LBA_L_M_LB(BGRAB2(_LBA)), LBA_L_L_MB(BGRAB1(_LBA)), LBA_L_L_LB(BGRAB0(_LBA)), + Misc2(0), ALC_MB(BGRAB1(xflen)), ALC_LB(BGRAB0(xflen)), Control(0) { + } } __attribute__((packed)); typedef CDB10 CDB10_t; struct CDB12 { - uint8_t Opcode; + uint8_t Opcode; - unsigned Service_Action : 5; - unsigned Misc : 3; + unsigned Service_Action : 5; + unsigned Misc : 3; - uint8_t LBA_L_M_LB; - uint8_t LBA_L_L_MB; - uint8_t LBA_L_L_LB; + uint8_t LBA_L_M_LB; + uint8_t LBA_L_L_MB; + uint8_t LBA_L_L_LB; - uint8_t ALC_M_LB; - uint8_t ALC_L_MB; - uint8_t ALC_L_LB; - uint8_t Control; + uint8_t ALC_M_LB; + uint8_t ALC_L_MB; + uint8_t ALC_L_LB; + uint8_t Control; } __attribute__((packed)); typedef CDB12 CDB12_t; struct CDB_LBA32_16 { - uint8_t Opcode; + uint8_t Opcode; - unsigned Service_Action : 5; - unsigned Misc : 3; + unsigned Service_Action : 5; + unsigned Misc : 3; - uint8_t LBA_L_M_MB; - uint8_t LBA_L_M_LB; - uint8_t LBA_L_L_MB; - uint8_t LBA_L_L_LB; + uint8_t LBA_L_M_MB; + uint8_t LBA_L_M_LB; + uint8_t LBA_L_L_MB; + uint8_t LBA_L_L_LB; - uint8_t A_M_M_MB; - uint8_t A_M_M_LB; - uint8_t A_M_L_MB; - uint8_t A_M_L_LB; + uint8_t A_M_M_MB; + uint8_t A_M_M_LB; + uint8_t A_M_L_MB; + uint8_t A_M_L_LB; - uint8_t ALC_M_MB; - uint8_t ALC_M_LB; - uint8_t ALC_L_MB; - uint8_t ALC_L_LB; + uint8_t ALC_M_MB; + uint8_t ALC_M_LB; + uint8_t ALC_L_MB; + uint8_t ALC_L_LB; - uint8_t Misc2; - uint8_t Control; + uint8_t Misc2; + uint8_t Control; } __attribute__((packed)); struct CDB_LBA64_16 { - uint8_t Opcode; - uint8_t Misc; - - uint8_t LBA_M_M_MB; - uint8_t LBA_M_M_LB; - uint8_t LBA_M_L_MB; - uint8_t LBA_M_L_LB; - - uint8_t LBA_L_M_MB; - uint8_t LBA_L_M_LB; - uint8_t LBA_L_L_MB; - uint8_t LBA_L_L_LB; - - uint8_t ALC_M_MB; - uint8_t ALC_M_LB; - uint8_t ALC_L_MB; - uint8_t ALC_L_LB; - - uint8_t Misc2; - uint8_t Control; + uint8_t Opcode; + uint8_t Misc; + + uint8_t LBA_M_M_MB; + uint8_t LBA_M_M_LB; + uint8_t LBA_M_L_MB; + uint8_t LBA_M_L_LB; + + uint8_t LBA_L_M_MB; + uint8_t LBA_L_M_LB; + uint8_t LBA_L_L_MB; + uint8_t LBA_L_L_LB; + + uint8_t ALC_M_MB; + uint8_t ALC_M_LB; + uint8_t ALC_L_MB; + uint8_t ALC_L_LB; + + uint8_t Misc2; + uint8_t Control; } __attribute__((packed)); struct InquiryResponse { - uint8_t DeviceType : 5; - uint8_t PeripheralQualifier : 3; - - unsigned Reserved : 7; - unsigned Removable : 1; - - uint8_t Version; - - unsigned ResponseDataFormat : 4; - unsigned HISUP : 1; - unsigned NormACA : 1; - unsigned TrmTsk : 1; - unsigned AERC : 1; - - uint8_t AdditionalLength; - //uint8_t Reserved3[2]; - - unsigned PROTECT : 1; - unsigned Res : 2; - unsigned ThreePC : 1; - unsigned TPGS : 2; - unsigned ACC : 1; - unsigned SCCS : 1; - - unsigned ADDR16 : 1; - unsigned R1 : 1; - unsigned R2 : 1; - unsigned MCHNGR : 1; - unsigned MULTIP : 1; - unsigned VS : 1; - unsigned ENCSERV : 1; - unsigned BQUE : 1; - - unsigned SoftReset : 1; - unsigned CmdQue : 1; - unsigned Reserved4 : 1; - unsigned Linked : 1; - unsigned Sync : 1; - unsigned WideBus16Bit : 1; - unsigned WideBus32Bit : 1; - unsigned RelAddr : 1; - - uint8_t VendorID[8]; - uint8_t ProductID[16]; - uint8_t RevisionID[4]; + uint8_t DeviceType : 5; + uint8_t PeripheralQualifier : 3; + + unsigned Reserved : 7; + unsigned Removable : 1; + + uint8_t Version; + + unsigned ResponseDataFormat : 4; + unsigned HISUP : 1; + unsigned NormACA : 1; + unsigned TrmTsk : 1; + unsigned AERC : 1; + + uint8_t AdditionalLength; + //uint8_t Reserved3[2]; + + unsigned PROTECT : 1; + unsigned Res : 2; + unsigned ThreePC : 1; + unsigned TPGS : 2; + unsigned ACC : 1; + unsigned SCCS : 1; + + unsigned ADDR16 : 1; + unsigned R1 : 1; + unsigned R2 : 1; + unsigned MCHNGR : 1; + unsigned MULTIP : 1; + unsigned VS : 1; + unsigned ENCSERV : 1; + unsigned BQUE : 1; + + unsigned SoftReset : 1; + unsigned CmdQue : 1; + unsigned Reserved4 : 1; + unsigned Linked : 1; + unsigned Sync : 1; + unsigned WideBus16Bit : 1; + unsigned WideBus32Bit : 1; + unsigned RelAddr : 1; + + uint8_t VendorID[8]; + uint8_t ProductID[16]; + uint8_t RevisionID[4]; } __attribute__((packed)); struct CommandBlockWrapperBase { - uint32_t dCBWSignature; - uint32_t dCBWTag; - uint32_t dCBWDataTransferLength; - uint8_t bmCBWFlags; + uint32_t dCBWSignature; + uint32_t dCBWTag; + uint32_t dCBWDataTransferLength; + uint8_t bmCBWFlags; public: - CommandBlockWrapperBase() { - } + CommandBlockWrapperBase() { + } - CommandBlockWrapperBase(uint32_t tag, uint32_t xflen, uint8_t flgs) : - dCBWSignature(MASS_CBW_SIGNATURE), dCBWTag(tag), dCBWDataTransferLength(xflen), bmCBWFlags(flgs) { - } + CommandBlockWrapperBase(uint32_t tag, uint32_t xflen, uint8_t flgs) : + dCBWSignature(MASS_CBW_SIGNATURE), dCBWTag(tag), dCBWDataTransferLength(xflen), bmCBWFlags(flgs) { + } } __attribute__((packed)); struct CommandBlockWrapper : public CommandBlockWrapperBase { - struct { - uint8_t bmCBWLUN : 4; - uint8_t bmReserved1 : 4; - }; + struct { + uint8_t bmCBWLUN : 4; + uint8_t bmReserved1 : 4; + }; - struct { - uint8_t bmCBWCBLength : 4; - uint8_t bmReserved2 : 4; - }; + struct { + uint8_t bmCBWCBLength : 4; + uint8_t bmReserved2 : 4; + }; - uint8_t CBWCB[16]; + uint8_t CBWCB[16]; public: - // All zeroed. - - CommandBlockWrapper() : - CommandBlockWrapperBase(0, 0, 0), bmReserved1(0), bmReserved2(0) { - for(int i = 0; i < 16; i++) CBWCB[i] = 0; - } - - // Generic Wrap, CDB zeroed. - - CommandBlockWrapper(uint32_t tag, uint32_t xflen, uint8_t flgs, uint8_t lu, uint8_t cmdlen, uint8_t cmd) : - CommandBlockWrapperBase(tag, xflen, flgs), - bmCBWLUN(lu), bmReserved1(0), bmCBWCBLength(cmdlen), bmReserved2(0) { - for(int i = 0; i < 16; i++) CBWCB[i] = 0; - // Type punning can cause optimization problems and bugs. - // Using reinterpret_cast to a dreinterpretifferent object is the proper way to do this. - //(((BASICCDB_t *) CBWCB)->LUN) = cmd; - BASICCDB_t *x = reinterpret_cast(CBWCB); - x->LUN = cmd; - } - - // Wrap for CDB of 6 - - CommandBlockWrapper(uint32_t tag, uint32_t xflen, CDB6_t *cdb, uint8_t dir) : - CommandBlockWrapperBase(tag, xflen, dir), - bmCBWLUN(cdb->LUN), bmReserved1(0), bmCBWCBLength(6), bmReserved2(0) { - memcpy(&CBWCB, cdb, 6); - } - // Wrap for CDB of 10 - - CommandBlockWrapper(uint32_t tag, uint32_t xflen, CDB10_t *cdb, uint8_t dir) : - CommandBlockWrapperBase(tag, xflen, dir), - bmCBWLUN(cdb->LUN), bmReserved1(0), bmCBWCBLength(10), bmReserved2(0) { - memcpy(&CBWCB, cdb, 10); - } + // All zeroed. + + CommandBlockWrapper() : + CommandBlockWrapperBase(0, 0, 0), bmReserved1(0), bmReserved2(0) { + for(int i = 0; i < 16; i++) CBWCB[i] = 0; + } + + // Generic Wrap, CDB zeroed. + + CommandBlockWrapper(uint32_t tag, uint32_t xflen, uint8_t flgs, uint8_t lu, uint8_t cmdlen, uint8_t cmd) : + CommandBlockWrapperBase(tag, xflen, flgs), + bmCBWLUN(lu), bmReserved1(0), bmCBWCBLength(cmdlen), bmReserved2(0) { + for(int i = 0; i < 16; i++) CBWCB[i] = 0; + // Type punning can cause optimization problems and bugs. + // Using reinterpret_cast to a dreinterpretifferent object is the proper way to do this. + //(((BASICCDB_t *) CBWCB)->LUN) = cmd; + BASICCDB_t *x = reinterpret_cast(CBWCB); + x->LUN = cmd; + } + + // Wrap for CDB of 6 + + CommandBlockWrapper(uint32_t tag, uint32_t xflen, CDB6_t *cdb, uint8_t dir) : + CommandBlockWrapperBase(tag, xflen, dir), + bmCBWLUN(cdb->LUN), bmReserved1(0), bmCBWCBLength(6), bmReserved2(0) { + memcpy(&CBWCB, cdb, 6); + } + // Wrap for CDB of 10 + + CommandBlockWrapper(uint32_t tag, uint32_t xflen, CDB10_t *cdb, uint8_t dir) : + CommandBlockWrapperBase(tag, xflen, dir), + bmCBWLUN(cdb->LUN), bmReserved1(0), bmCBWCBLength(10), bmReserved2(0) { + memcpy(&CBWCB, cdb, 10); + } } __attribute__((packed)); struct CommandStatusWrapper { - uint32_t dCSWSignature; - uint32_t dCSWTag; - uint32_t dCSWDataResidue; - uint8_t bCSWStatus; + uint32_t dCSWSignature; + uint32_t dCSWTag; + uint32_t dCSWDataResidue; + uint8_t bCSWStatus; } __attribute__((packed)); struct RequestSenseResponce { - uint8_t bResponseCode; - uint8_t bSegmentNumber; - - uint8_t bmSenseKey : 4; - uint8_t bmReserved : 1; - uint8_t bmILI : 1; - uint8_t bmEOM : 1; - uint8_t bmFileMark : 1; - - uint8_t Information[4]; - uint8_t bAdditionalLength; - uint8_t CmdSpecificInformation[4]; - uint8_t bAdditionalSenseCode; - uint8_t bAdditionalSenseQualifier; - uint8_t bFieldReplaceableUnitCode; - uint8_t SenseKeySpecific[3]; + uint8_t bResponseCode; + uint8_t bSegmentNumber; + + uint8_t bmSenseKey : 4; + uint8_t bmReserved : 1; + uint8_t bmILI : 1; + uint8_t bmEOM : 1; + uint8_t bmFileMark : 1; + + uint8_t Information[4]; + uint8_t bAdditionalLength; + uint8_t CmdSpecificInformation[4]; + uint8_t bAdditionalSenseCode; + uint8_t bAdditionalSenseQualifier; + uint8_t bFieldReplaceableUnitCode; + uint8_t SenseKeySpecific[3]; } __attribute__((packed)); class BulkOnly : public USBDeviceConfig, public UsbConfigXtracter { protected: - static const uint8_t epDataInIndex; // DataIn endpoint index - static const uint8_t epDataOutIndex; // DataOUT endpoint index - static const uint8_t epInterruptInIndex; // InterruptIN endpoint index - - USB *pUsb; - uint8_t bAddress; - uint8_t bConfNum; // configuration number - uint8_t bIface; // interface value - uint8_t bNumEP; // total number of EP in the configuration - uint32_t qNextPollTime; // next poll time - bool bPollEnable; // poll enable flag - - EpInfo epInfo[MASS_MAX_ENDPOINTS]; - - uint32_t dCBWTag; // Tag - //uint32_t dCBWDataTransferLength; // Data Transfer Length - uint8_t bLastUsbError; // Last USB error - uint8_t bMaxLUN; // Max LUN - uint8_t bTheLUN; // Active LUN - uint32_t CurrentCapacity[MASS_MAX_SUPPORTED_LUN]; // Total sectors - uint16_t CurrentSectorSize[MASS_MAX_SUPPORTED_LUN]; // Sector size, clipped to 16 bits - bool LUNOk[MASS_MAX_SUPPORTED_LUN]; // use this to check for media changes. - bool WriteOk[MASS_MAX_SUPPORTED_LUN]; - void PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR* ep_ptr); - - - // Additional Initialization Method for Subclasses - - virtual uint8_t OnInit() { - return 0; - }; + static const uint8_t epDataInIndex; // DataIn endpoint index + static const uint8_t epDataOutIndex; // DataOUT endpoint index + static const uint8_t epInterruptInIndex; // InterruptIN endpoint index + + USB *pUsb; + uint8_t bAddress; + uint8_t bConfNum; // configuration number + uint8_t bIface; // interface value + uint8_t bNumEP; // total number of EP in the configuration + uint32_t qNextPollTime; // next poll time + bool bPollEnable; // poll enable flag + + EpInfo epInfo[MASS_MAX_ENDPOINTS]; + + uint32_t dCBWTag; // Tag + //uint32_t dCBWDataTransferLength; // Data Transfer Length + uint8_t bLastUsbError; // Last USB error + uint8_t bMaxLUN; // Max LUN + uint8_t bTheLUN; // Active LUN + uint32_t CurrentCapacity[MASS_MAX_SUPPORTED_LUN]; // Total sectors + uint16_t CurrentSectorSize[MASS_MAX_SUPPORTED_LUN]; // Sector size, clipped to 16 bits + bool LUNOk[MASS_MAX_SUPPORTED_LUN]; // use this to check for media changes. + bool WriteOk[MASS_MAX_SUPPORTED_LUN]; + void PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR* ep_ptr); + + + // Additional Initialization Method for Subclasses + + virtual uint8_t OnInit() { + return 0; + }; + public: - BulkOnly(USB *p); + BulkOnly(USB *p); - uint8_t GetLastUsbError() { - return bLastUsbError; - }; + uint8_t GetLastUsbError() { + return bLastUsbError; + }; - uint8_t GetbMaxLUN() { - return bMaxLUN; // Max LUN - } + uint8_t GetbMaxLUN() { + return bMaxLUN; // Max LUN + } - uint8_t GetbTheLUN() { - return bTheLUN; // Active LUN - } + uint8_t GetbTheLUN() { + return bTheLUN; // Active LUN + } - bool WriteProtected(uint8_t lun); - uint8_t MediaCTL(uint8_t lun, uint8_t ctl); - uint8_t Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf); - uint8_t Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, USBReadParser *prs); - uint8_t Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t *buf); - uint8_t LockMedia(uint8_t lun, uint8_t lock); + bool WriteProtected(uint8_t lun); + uint8_t MediaCTL(uint8_t lun, uint8_t ctl); + uint8_t Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf); + uint8_t Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, USBReadParser *prs); + uint8_t Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t *buf); + uint8_t LockMedia(uint8_t lun, uint8_t lock); - bool LUNIsGood(uint8_t lun); - uint32_t GetCapacity(uint8_t lun); - uint16_t GetSectorSize(uint8_t lun); + bool LUNIsGood(uint8_t lun); + uint32_t GetCapacity(uint8_t lun); + uint16_t GetSectorSize(uint8_t lun); - // USBDeviceConfig implementation - uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed); - uint8_t ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed); + // USBDeviceConfig implementation + uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed); + uint8_t ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed); - uint8_t Release(); - uint8_t Poll(); + uint8_t Release(); + uint8_t Poll(); - virtual uint8_t GetAddress() { - return bAddress; - }; + virtual uint8_t GetAddress() { + return bAddress; + }; - // UsbConfigXtracter implementation - void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep); + // UsbConfigXtracter implementation + void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep); - virtual bool DEVCLASSOK(uint8_t klass) { - return (klass == USB_CLASS_MASS_STORAGE); - } + virtual bool DEVCLASSOK(uint8_t klass) { + return (klass == USB_CLASS_MASS_STORAGE); + } - uint8_t SCSITransaction6(CDB6_t *cdb, uint16_t buf_size, void *buf, uint8_t dir); - uint8_t SCSITransaction10(CDB10_t *cdb, uint16_t buf_size, void *buf, uint8_t dir); + uint8_t SCSITransaction6(CDB6_t *cdb, uint16_t buf_size, void *buf, uint8_t dir); + uint8_t SCSITransaction10(CDB10_t *cdb, uint16_t buf_size, void *buf, uint8_t dir); private: - uint8_t Inquiry(uint8_t lun, uint16_t size, uint8_t *buf); - uint8_t TestUnitReady(uint8_t lun); - uint8_t RequestSense(uint8_t lun, uint16_t size, uint8_t *buf); - uint8_t ModeSense6(uint8_t lun, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t len, uint8_t *buf); - uint8_t GetMaxLUN(uint8_t *max_lun); - uint8_t SetCurLUN(uint8_t lun); - void Reset(); - uint8_t ResetRecovery(); - uint8_t ReadCapacity10(uint8_t lun, uint8_t *buf); - void ClearAllEP(); - void CheckMedia(); - bool CheckLUN(uint8_t lun); - uint8_t Page3F(uint8_t lun); - bool IsValidCBW(uint8_t size, uint8_t *pcbw); - bool IsMeaningfulCBW(uint8_t size, uint8_t *pcbw); - - bool IsValidCSW(CommandStatusWrapper *pcsw, CommandBlockWrapperBase *pcbw); - - uint8_t ClearEpHalt(uint8_t index); -#if MS_WANT_PARSER - uint8_t Transaction(CommandBlockWrapper *cbw, uint16_t bsize, void *buf, uint8_t flags); -#endif - uint8_t Transaction(CommandBlockWrapper *cbw, uint16_t bsize, void *buf); - uint8_t HandleUsbError(uint8_t error, uint8_t index); - uint8_t HandleSCSIError(uint8_t status); + uint8_t Inquiry(uint8_t lun, uint16_t size, uint8_t *buf); + uint8_t TestUnitReady(uint8_t lun); + uint8_t RequestSense(uint8_t lun, uint16_t size, uint8_t *buf); + uint8_t ModeSense6(uint8_t lun, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t len, uint8_t *buf); + uint8_t GetMaxLUN(uint8_t *max_lun); + uint8_t SetCurLUN(uint8_t lun); + void Reset(); + uint8_t ResetRecovery(); + uint8_t ReadCapacity10(uint8_t lun, uint8_t *buf); + void ClearAllEP(); + void CheckMedia(); + bool CheckLUN(uint8_t lun); + uint8_t Page3F(uint8_t lun); + bool IsValidCBW(uint8_t size, uint8_t *pcbw); + bool IsMeaningfulCBW(uint8_t size, uint8_t *pcbw); + + bool IsValidCSW(CommandStatusWrapper *pcsw, CommandBlockWrapperBase *pcbw); + + uint8_t ClearEpHalt(uint8_t index); + #if MS_WANT_PARSER + uint8_t Transaction(CommandBlockWrapper *cbw, uint16_t bsize, void *buf, uint8_t flags); + #endif + uint8_t Transaction(CommandBlockWrapper *cbw, uint16_t bsize, void *buf); + uint8_t HandleUsbError(uint8_t error, uint8_t index); + uint8_t HandleSCSIError(uint8_t status); }; - -#endif // __MASSTORAGE_H__ diff --git a/Marlin/src/sd/usb_flashdrive/lib/settings.h b/Marlin/src/sd/usb_flashdrive/lib/settings.h index b549a1ae36..f59467b355 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/settings.h +++ b/Marlin/src/sd/usb_flashdrive/lib/settings.h @@ -22,8 +22,7 @@ Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ -#ifndef USB_HOST_SHIELD_SETTINGS_H -#define USB_HOST_SHIELD_SETTINGS_H +#pragma once #include "../../../inc/MarlinConfig.h" @@ -232,5 +231,3 @@ e-mail : support@circuitsathome.com #ifdef ARDUINO_ESP8266_WIFIO #error "This board is currently not supported" #endif - -#endif /* SETTINGS_H */ diff --git a/Marlin/src/sd/usb_flashdrive/usb_host.h b/Marlin/src/sd/usb_flashdrive/usb_host.h index e19fcfe914..f5e8651556 100644 --- a/Marlin/src/sd/usb_flashdrive/usb_host.h +++ b/Marlin/src/sd/usb_flashdrive/usb_host.h @@ -19,8 +19,7 @@ * location: . * ****************************************************************************/ -#ifndef _USB_HOST_H_ -#define _USB_HOST_H_ +#pragma once /* This the following comes from "lib/usbhost.h", but has been rewritten * to use the SPI functions from Marlin's HAL */ @@ -57,5 +56,3 @@ class MAX3421e { #if defined(__SAM3X8E__) && !defined(ARDUINO_SAM_DUE) #define ARDUINO_SAM_DUE // Spoof the USB library that this is a DUE #endif - -#endif // _USB_HOST_H_ diff --git a/buildroot/share/fonts/getline.h b/buildroot/share/fonts/getline.h index 180a218dc7..1ba0e878e8 100644 --- a/buildroot/share/fonts/getline.h +++ b/buildroot/share/fonts/getline.h @@ -1,6 +1,5 @@ - #ifndef MYGETLINE_H -#define MYGETLINE_H 1 +#define MYGETLINE_H //#include "config.h"