andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge pull request #9188 from thinkyhead/bf2_creality_ender 

[2.0.x] Add Creality Ender config/board
pull/1/head
Scott Lahteine 7 years ago
committed by GitHub
parent
d743d96886 2038722c52
commit
f4e4c7a7c8
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
16 changed files with 3600 additions and 16 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 3
      Marlin/src/Makefile
  2. 1781
      Marlin/src/config/examples/Creality/Ender/Configuration.h
  3. 1597
      Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
  4. 18
      Marlin/src/config/examples/Creality/Ender/README.md
  5. 74
      Marlin/src/config/examples/Creality/Ender/_Bootscreen.h
  6. 54
      Marlin/src/config/examples/Creality/Ender/_Statusscreen.h
  7. 1
      Marlin/src/core/boards.h
  8. 22
      Marlin/src/lcd/dogm/dogm_bitmaps.h
  9. 2
      Marlin/src/lcd/language/language_en.h
  10. 13
      Marlin/src/lcd/ultralcd_impl_DOGM.h
  11. 2
      Marlin/src/pins/pins.h
  12. 4
      Marlin/src/pins/pins_BEAST.h
  13. 2
      Marlin/src/pins/pins_CHITU3D.h
  14. 34
      Marlin/src/pins/pins_CREALITY_ENDER.h
  15. 7
      Marlin/src/pins/pins_SANGUINOLOLU_11.h
  16. 2
      Marlin/src/pins/pins_STM3R_MINI.h

3
Marlin/src/Makefile
View File

@ -176,6 +176,9 @@ MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),69)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),601)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
#Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),7)

1781
Marlin/src/config/examples/Creality/Ender/Configuration.h
View File

File diff suppressed because it is too large

1597
Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
View File

File diff suppressed because it is too large

18
Marlin/src/config/examples/Creality/Ender/README.md
View File

@ -0,0 +1,18 @@
# Creality Ender Support
This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because
* 1.0.0 had very different serial output in `setup()` and overall code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`.
Configurations were found by seeing what code was compiled into the firmware, and constants used there.
For U8Glib, at least version 1.14 and at most 1.17 is used, because
* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.
## Bitmaps
The bootscreen and custom status screens come from Creality's firmware.

74
Marlin/src/config/examples/Creality/Ender/_Bootscreen.h
View File

@ -0,0 +1,74 @@
#ifndef BOOTSCREEN_H_
#define BOOTSCREEN_H_
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 // milliseconds
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 // Width in pixels
#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64 // Height in pixels
const unsigned char custom_start_bmp[] PROGMEM = {
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF3,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xE1,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFE,0x78,0x00,0x00,0x03,0xDD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0xFF,0x80,0x7E,0x00,0x01,0xEE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0x7D,0xCF,0xFC,0x00,0x00,0xF7,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x8E,0x06,0x00,0x00,0x00,0x7B,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,0x7D,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFC,0x01,0xFE,0x00,0x00,0x3E,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x03,0x1F,0x73,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF8,0x00,0x01,0x8F,0x81,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x00,0x00,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xFC,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x0F,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFE,0x03,0xFF,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x07,0xC0,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x07,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x07,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x07,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x03,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7E,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x8E,0x03,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x80,0x00,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x87,0xFD,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x87,0xFF,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x0F,0xE7,0xF3,0x0F,0xFC,0x23,0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x0F,0xEF,0x80,0x07,0xF0,0x03,0xF0,0x1E,0x00,0x7F,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0x1F,0xCF,0x81,0x87,0xC7,0x87,0xC7,0x0C,0x00,0x7F,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0xC7,0xC7,0x8F,0xC7,0x9F,0x0F,0x0C,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0x87,0x8F,0x1F,0x8F,0x1F,0x0F,0x1F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFC,0x3F,0x9F,0x8F,0x8F,0x1F,0x8E,0x00,0x1E,0x3F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFC,0x7F,0x3F,0x0F,0x1E,0x3F,0x1E,0x3F,0xFE,0x3F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xF8,0x7F,0xFF,0x1F,0x1C,0x3F,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0x1E,0x1C,0x7E,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xF0,0xFF,0xCE,0x3E,0x3C,0x7E,0x3C,0x7F,0xB8,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xF0,0xFF,0x9E,0x3C,0x38,0x7C,0x38,0x7E,0x78,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xE1,0xFF,0x3C,0x7C,0x78,0x7C,0x78,0x3C,0xF1,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xE1,0xF8,0x38,0x78,0x78,0x10,0x18,0x01,0xF1,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0x00,0x00,0x60,0x20,0x3C,0x00,0x7C,0x07,0x80,0x7F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x1F,0xFE,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
};
#endif // BOOTSCREEN_H_

54
Marlin/src/config/examples/Creality/Ender/_Statusscreen.h
View File

@ -0,0 +1,54 @@
#ifndef STATUSSCREEN_H_
#define STATUSSCREEN_H_
#define STATUS_SCREENWIDTH 128 // Width in pixels
const unsigned char status_screen0_bmp[] PROGMEM = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
};
const unsigned char status_screen1_bmp[] PROGMEM = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
};
#define STATUS_SCREEN_X 0
#define STATUS_SCREEN_HOTEND_TEXT_X(i) (39 + (i) * 25)
#define STATUS_SCREEN_BED_TEXT_X 72
#define STATUS_SCREEN_FAN_TEXT_X 103
#endif // STATUSSCREEN_H_

1
Marlin/src/core/boards.h
View File

@ -115,6 +115,7 @@
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc)
#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board
#define BOARD_CREALITY_ENDER 601 // Creality Ender
#define BOARD_STB_11 64 // STB V1.1
#define BOARD_AZTEEG_X1 65 // Azteeg X1

22
Marlin/src/lcd/dogm/dogm_bitmaps.h
View File

@ -115,7 +115,14 @@
// When only one extruder is selected, the "1" on the symbol will not
// be displayed.
#if HAS_TEMP_BED
#ifdef CUSTOM_STATUS_SCREEN_FILE
#undef STATUS_SCREENWIDTH
// This file must define STATUS_SCREENWIDTH and status_screen{0,1}_bmp.
// It can also define STATUS_SCREEN_X, STATUS_SCREEN_{BED,FAN}_TEXT_X and
// STATUS_SCREEN_HOTEND_TEXT_X(i) to modify draw locations.
#include CUSTOM_STATUS_SCREEN_FILE
#elif HAS_TEMP_BED
#if HOTENDS == 1
#define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels
@ -513,3 +520,16 @@
};
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
#ifndef STATUS_SCREEN_X
#define STATUS_SCREEN_X 9
#endif
#ifndef STATUS_SCREEN_HOTEND_TEXT_X
#define STATUS_SCREEN_HOTEND_TEXT_X(i) (5 + (i) * 25)
#endif
#ifndef STATUS_SCREEN_BED_TEXT_X
#define STATUS_SCREEN_BED_TEXT_X 81
#endif
#ifndef STATUS_SCREEN_FAN_TEXT_X
#define STATUS_SCREEN_FAN_TEXT_X 104
#endif

2
Marlin/src/lcd/language/language_en.h
View File

@ -37,7 +37,7 @@
#undef en
#ifndef WELCOME_MSG
#define WELCOME_MSG MACHINE_NAME _UxGT(" ready.")
#define WELCOME_MSG MACHINE_NAME _UxGT(" Ready.")
#endif
#ifndef MSG_BACK
#define MSG_BACK _UxGT("Back")

13
Marlin/src/lcd/ultralcd_impl_DOGM.h
View File

@ -324,7 +324,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) {
u8g.firstPage();
do {
u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
u8g.drawBitmapP(offx, offy, (START_BMPWIDTH + 7) / 8, START_BMPHEIGHT, start_bmp);
lcd_setFont(FONT_MENU);
#ifndef STRING_SPLASH_LINE2
u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT), STRING_SPLASH_LINE1);
@ -365,7 +365,6 @@ static void lcd_implementation_init() {
#elif ENABLED(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270°
#endif
}
// The kill screen is displayed for unrecoverable conditions
@ -503,7 +502,9 @@ static void lcd_implementation_status_screen() {
if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) {
u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT,
u8g.drawBitmapP(
STATUS_SCREEN_X, 1,
(STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT,
#if HAS_FAN0
blink && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp
#else
@ -519,11 +520,11 @@ static void lcd_implementation_status_screen() {
if (PAGE_UNDER(28)) {
// Extruders
HOTEND_LOOP() _draw_heater_status(5 + e * 25, e, blink);
HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink);
// Heated bed
#if HOTENDS < 4 && HAS_TEMP_BED
_draw_heater_status(81, -1, blink);
_draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink);
#endif
#if HAS_FAN0
@ -531,7 +532,7 @@ static void lcd_implementation_status_screen() {
// Fan
const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256;
if (per) {
u8g.setPrintPos(104, 27);
u8g.setPrintPos(STATUS_SCREEN_FAN_TEXT_X, 27);
lcd_print(itostr3(per));
u8g.print('%');
}

2
Marlin/src/pins/pins.h
View File

@ -195,6 +195,8 @@
#include "pins_MELZI_CREALITY.h" // ATmega644P, ATmega1284P
#elif MB(MELZI_MALYAN)
#include "pins_MELZI_MALYAN.h" // ATmega644P, ATmega1284P
#elif MB(CREALITY_ENDER)
#include "pins_CREALITY_ENDER.h" // ATmega1284P
#elif MB(STB_11)
#include "pins_STB_11.h" // ATmega644P, ATmega1284P
#elif MB(AZTEEG_X1)

4
Marlin/src/pins/pins_BEAST.h
View File

@ -21,7 +21,7 @@
*/
#if !defined(__STM32F1__) && !defined(__STM32F4__)
#error "Oops! Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
#error "Oops! Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
#endif
/**
@ -31,8 +31,6 @@
#define DEFAULT_MACHINE_NAME "STM32F103RET6"
#define BOARD_NAME "Marlin for STM32"
#define LARGE_FLASH true
// Enable I2C_EEPROM for testing
#define I2C_EEPROM

2
Marlin/src/pins/pins_CHITU3D.h
View File

@ -31,8 +31,6 @@
#define DEFAULT_MACHINE_NAME "STM32F103RET6"
#define BOARD_NAME "Chitu3d Marlin"
#define LARGE_FLASH true
// Enable I2C_EEPROM for testing
//#define I2C_EEPROM

34
Marlin/src/pins/pins_CREALITY_ENDER.h
View File

@ -0,0 +1,34 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Creality Ender pin assignments
*
* Applies to the following boards:
*
* Creality Ender-2
* Creality Ender-4
*/
#define BOARD_NAME "Creality Ender"
#include "pins_SANGUINOLOLU_12.h"

7
Marlin/src/pins/pins_SANGUINOLOLU_11.h
View File

@ -114,7 +114,7 @@
#endif
#if MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI)
#if MB(AZTEEG_X1) || MB(STB_11) || MB(CREALITY_ENDER) || ENABLED(IS_MELZI)
#define FAN_PIN 4 // Works for Panelolu2 too
#endif
@ -187,6 +187,11 @@
#define DOGLCD_CS 17
#define LCD_BACKLIGHT_PIN 28 // PA3
#elif MB(CREALITY_ENDER)
#define BEEPER_PIN 27
#define DOGLCD_CS 28
#else // !MAKRPANEL
#define DOGLCD_CS 29

2
Marlin/src/pins/pins_STM3R_MINI.h
View File

@ -31,8 +31,6 @@
#define DEFAULT_MACHINE_NAME "STM3R Mini"
#define BOARD_NAME "Marlin for STM32"
#define LARGE_FLASH true
// Enable I2C_EEPROM for testing
#define I2C_EEPROM

Write Preview
Loading…
Cancel
Save