Browse Source

Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom

Add Linear Advance values to EEPROM and LCD
pull/1/head
Scott Lahteine 8 years ago
committed by GitHub
parent
commit
f33a650ecc
  1. 6
      Marlin/Configuration_adv.h
  2. 174
      Marlin/Marlin_main.cpp
  3. 382
      Marlin/configuration_store.cpp
  4. 6
      Marlin/example_configurations/Cartesio/Configuration_adv.h
  5. 6
      Marlin/example_configurations/Felix/Configuration_adv.h
  6. 6
      Marlin/example_configurations/Hephestos/Configuration_adv.h
  7. 6
      Marlin/example_configurations/Hephestos_2/Configuration_adv.h
  8. 6
      Marlin/example_configurations/K8200/Configuration_adv.h
  9. 6
      Marlin/example_configurations/K8400/Configuration_adv.h
  10. 6
      Marlin/example_configurations/RigidBot/Configuration_adv.h
  11. 6
      Marlin/example_configurations/SCARA/Configuration_adv.h
  12. 6
      Marlin/example_configurations/TAZ4/Configuration_adv.h
  13. 6
      Marlin/example_configurations/TinyBoy2/Configuration_adv.h
  14. 6
      Marlin/example_configurations/WITBOX/Configuration_adv.h
  15. 6
      Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
  16. 6
      Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
  17. 6
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  18. 6
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  19. 6
      Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
  20. 6
      Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
  21. 6
      Marlin/example_configurations/makibox/Configuration_adv.h
  22. 6
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
  23. 6
      Marlin/example_configurations/wt150/Configuration_adv.h
  24. 2
      Marlin/language_an.h
  25. 2
      Marlin/language_bg.h
  26. 2
      Marlin/language_ca.h
  27. 2
      Marlin/language_cn.h
  28. 2
      Marlin/language_cz.h
  29. 2
      Marlin/language_da.h
  30. 2
      Marlin/language_de.h
  31. 2
      Marlin/language_el-gr.h
  32. 2
      Marlin/language_el.h
  33. 7
      Marlin/language_en.h
  34. 2
      Marlin/language_es.h
  35. 2
      Marlin/language_eu.h
  36. 2
      Marlin/language_fi.h
  37. 2
      Marlin/language_fr.h
  38. 2
      Marlin/language_gl.h
  39. 2
      Marlin/language_hr.h
  40. 2
      Marlin/language_it.h
  41. 2
      Marlin/language_kana.h
  42. 2
      Marlin/language_kana_utf8.h
  43. 2
      Marlin/language_nl.h
  44. 2
      Marlin/language_pl.h
  45. 2
      Marlin/language_pt-br.h
  46. 2
      Marlin/language_pt-br_utf8.h
  47. 2
      Marlin/language_pt.h
  48. 2
      Marlin/language_pt_utf8.h
  49. 2
      Marlin/language_ru.h
  50. 6
      Marlin/language_test.h
  51. 2
      Marlin/language_tr.h
  52. 2
      Marlin/language_uk.h
  53. 2
      Marlin/language_zh_CN.h
  54. 2
      Marlin/language_zh_TW.h
  55. 5
      Marlin/planner.h
  56. 429
      Marlin/ultralcd.cpp
  57. 42
      Marlin/ultralcd_impl_DOGM.h
  58. 43
      Marlin/ultralcd_impl_HD44780.h

6
Marlin/Configuration_adv.h

@ -633,13 +633,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

174
Marlin/Marlin_main.cpp

@ -1285,19 +1285,19 @@ inline bool code_value_bool() { return !code_has_value() || code_value_byte() >
volumetric_unit_factor = pow(linear_unit_factor, 3.0); volumetric_unit_factor = pow(linear_unit_factor, 3.0);
} }
inline float axis_unit_factor(int axis) { inline float axis_unit_factor(const AxisEnum axis) {
return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor); return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor);
} }
inline float code_value_linear_units() { return code_value_float() * linear_unit_factor; } inline float code_value_linear_units() { return code_value_float() * linear_unit_factor; }
inline float code_value_axis_units(int axis) { return code_value_float() * axis_unit_factor(axis); } inline float code_value_axis_units(const AxisEnum axis) { return code_value_float() * axis_unit_factor(axis); }
inline float code_value_per_axis_unit(int axis) { return code_value_float() / axis_unit_factor(axis); } inline float code_value_per_axis_unit(const AxisEnum axis) { return code_value_float() / axis_unit_factor(axis); }
#else #else
inline float code_value_linear_units() { return code_value_float(); } #define code_value_linear_units() code_value_float()
inline float code_value_axis_units(int axis) { UNUSED(axis); return code_value_float(); } #define code_value_axis_units(A) code_value_float()
inline float code_value_per_axis_unit(int axis) { UNUSED(axis); return code_value_float(); } #define code_value_per_axis_unit(A) code_value_float()
#endif #endif
@ -3063,7 +3063,7 @@ static void homeaxis(const AxisEnum axis) {
void gcode_get_destination() { void gcode_get_destination() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) if (code_seen(axis_codes[i]))
destination[i] = code_value_axis_units(i) + (axis_relative_modes[i] || relative_mode ? current_position[i] : 0); destination[i] = code_value_axis_units((AxisEnum)i) + (axis_relative_modes[i] || relative_mode ? current_position[i] : 0);
else else
destination[i] = current_position[i]; destination[i] = current_position[i];
} }
@ -3232,7 +3232,7 @@ inline void gcode_G0_G1(
float arc_offset[2] = { 0.0, 0.0 }; float arc_offset[2] = { 0.0, 0.0 };
if (code_seen('R')) { if (code_seen('R')) {
const float r = code_value_axis_units(X_AXIS), const float r = code_value_linear_units(),
x1 = current_position[X_AXIS], y1 = current_position[Y_AXIS], x1 = current_position[X_AXIS], y1 = current_position[Y_AXIS],
x2 = destination[X_AXIS], y2 = destination[Y_AXIS]; x2 = destination[X_AXIS], y2 = destination[Y_AXIS];
if (r && (x2 != x1 || y2 != y1)) { if (r && (x2 != x1 || y2 != y1)) {
@ -3248,8 +3248,8 @@ inline void gcode_G0_G1(
} }
} }
else { else {
if (code_seen('I')) arc_offset[X_AXIS] = code_value_axis_units(X_AXIS); if (code_seen('I')) arc_offset[X_AXIS] = code_value_linear_units();
if (code_seen('J')) arc_offset[Y_AXIS] = code_value_axis_units(Y_AXIS); if (code_seen('J')) arc_offset[Y_AXIS] = code_value_linear_units();
} }
if (arc_offset[0] || arc_offset[1]) { if (arc_offset[0] || arc_offset[1]) {
@ -3302,10 +3302,10 @@ inline void gcode_G4() {
gcode_get_destination(); gcode_get_destination();
const float offset[] = { const float offset[] = {
code_seen('I') ? code_value_axis_units(X_AXIS) : 0.0, code_seen('I') ? code_value_linear_units() : 0.0,
code_seen('J') ? code_value_axis_units(Y_AXIS) : 0.0, code_seen('J') ? code_value_linear_units() : 0.0,
code_seen('P') ? code_value_axis_units(X_AXIS) : 0.0, code_seen('P') ? code_value_linear_units() : 0.0,
code_seen('Q') ? code_value_axis_units(Y_AXIS) : 0.0 code_seen('Q') ? code_value_linear_units() : 0.0
}; };
plan_cubic_move(offset); plan_cubic_move(offset);
@ -4023,7 +4023,7 @@ inline void gcode_G28() {
} }
if (code_seen('Z')) { if (code_seen('Z')) {
mbl.z_values[px][py] = code_value_axis_units(Z_AXIS); mbl.z_values[px][py] = code_value_linear_units();
} }
else { else {
SERIAL_CHAR('Z'); say_not_entered(); SERIAL_CHAR('Z'); say_not_entered();
@ -4033,7 +4033,7 @@ inline void gcode_G28() {
case MeshSetZOffset: case MeshSetZOffset:
if (code_seen('Z')) { if (code_seen('Z')) {
mbl.z_offset = code_value_axis_units(Z_AXIS); mbl.z_offset = code_value_linear_units();
} }
else { else {
SERIAL_CHAR('Z'); say_not_entered(); SERIAL_CHAR('Z'); say_not_entered();
@ -4305,7 +4305,7 @@ inline void gcode_G28() {
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR) #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
zoffset = code_seen('Z') ? code_value_axis_units(Z_AXIS) : 0; zoffset = code_seen('Z') ? code_value_linear_units() : 0;
#endif #endif
@ -4313,10 +4313,10 @@ inline void gcode_G28() {
xy_probe_feedrate_mm_s = MMM_TO_MMS(code_seen('S') ? code_value_linear_units() : XY_PROBE_SPEED); xy_probe_feedrate_mm_s = MMM_TO_MMS(code_seen('S') ? code_value_linear_units() : XY_PROBE_SPEED);
left_probe_bed_position = code_seen('L') ? (int)code_value_axis_units(X_AXIS) : LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION); left_probe_bed_position = code_seen('L') ? (int)code_value_linear_units() : LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION);
right_probe_bed_position = code_seen('R') ? (int)code_value_axis_units(X_AXIS) : LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION); right_probe_bed_position = code_seen('R') ? (int)code_value_linear_units() : LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION);
front_probe_bed_position = code_seen('F') ? (int)code_value_axis_units(Y_AXIS) : LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION); front_probe_bed_position = code_seen('F') ? (int)code_value_linear_units() : LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION);
back_probe_bed_position = code_seen('B') ? (int)code_value_axis_units(Y_AXIS) : LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION); back_probe_bed_position = code_seen('B') ? (int)code_value_linear_units() : LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION);
const bool left_out_l = left_probe_bed_position < LOGICAL_X_POSITION(MIN_PROBE_X), const bool left_out_l = left_probe_bed_position < LOGICAL_X_POSITION(MIN_PROBE_X),
left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - (MIN_PROBE_EDGE), left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - (MIN_PROBE_EDGE),
@ -4927,8 +4927,8 @@ inline void gcode_G28() {
* S = Stows the probe if 1 (default=1) * S = Stows the probe if 1 (default=1)
*/ */
inline void gcode_G30() { inline void gcode_G30() {
float X_probe_location = code_seen('X') ? code_value_axis_units(X_AXIS) : current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER, float X_probe_location = code_seen('X') ? code_value_linear_units() : current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER,
Y_probe_location = code_seen('Y') ? code_value_axis_units(Y_AXIS) : current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER; Y_probe_location = code_seen('Y') ? code_value_linear_units() : current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER;
float pos[XYZ] = { X_probe_location, Y_probe_location, LOGICAL_Z_POSITION(0) }; float pos[XYZ] = { X_probe_location, Y_probe_location, LOGICAL_Z_POSITION(0) };
if (!position_is_reachable(pos, true)) return; if (!position_is_reachable(pos, true)) return;
@ -5431,13 +5431,13 @@ inline void gcode_G92() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
#if IS_SCARA #if IS_SCARA
current_position[i] = code_value_axis_units(i); current_position[i] = code_value_axis_units((AxisEnum)i);
if (i != E_AXIS) didXYZ = true; if (i != E_AXIS) didXYZ = true;
#else #else
#if HAS_POSITION_SHIFT #if HAS_POSITION_SHIFT
float p = current_position[i]; const float p = current_position[i];
#endif #endif
float v = code_value_axis_units(i); float v = code_value_axis_units((AxisEnum)i);
current_position[i] = v; current_position[i] = v;
@ -6078,7 +6078,7 @@ inline void gcode_M42() {
bool stow_probe_after_each = code_seen('E'); bool stow_probe_after_each = code_seen('E');
float X_probe_location = code_seen('X') ? code_value_axis_units(X_AXIS) : X_current + X_PROBE_OFFSET_FROM_EXTRUDER; float X_probe_location = code_seen('X') ? code_value_linear_units() : X_current + X_PROBE_OFFSET_FROM_EXTRUDER;
#if DISABLED(DELTA) #if DISABLED(DELTA)
if (!WITHIN(X_probe_location, LOGICAL_X_POSITION(MIN_PROBE_X), LOGICAL_X_POSITION(MAX_PROBE_X))) { if (!WITHIN(X_probe_location, LOGICAL_X_POSITION(MIN_PROBE_X), LOGICAL_X_POSITION(MAX_PROBE_X))) {
out_of_range_error(PSTR("X")); out_of_range_error(PSTR("X"));
@ -6086,7 +6086,7 @@ inline void gcode_M42() {
} }
#endif #endif
float Y_probe_location = code_seen('Y') ? code_value_axis_units(Y_AXIS) : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER; float Y_probe_location = code_seen('Y') ? code_value_linear_units() : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER;
#if DISABLED(DELTA) #if DISABLED(DELTA)
if (!WITHIN(Y_probe_location, LOGICAL_Y_POSITION(MIN_PROBE_Y), LOGICAL_Y_POSITION(MAX_PROBE_Y))) { if (!WITHIN(Y_probe_location, LOGICAL_Y_POSITION(MIN_PROBE_Y), LOGICAL_Y_POSITION(MAX_PROBE_Y))) {
out_of_range_error(PSTR("Y")); out_of_range_error(PSTR("Y"));
@ -7063,7 +7063,7 @@ inline void gcode_M92() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
if (i == E_AXIS) { if (i == E_AXIS) {
float value = code_value_per_axis_unit(E_AXIS + TARGET_EXTRUDER); const float value = code_value_per_axis_unit(E_AXIS + TARGET_EXTRUDER);
if (value < 20.0) { if (value < 20.0) {
float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab. float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab.
planner.max_jerk[E_AXIS] *= factor; planner.max_jerk[E_AXIS] *= factor;
@ -7250,7 +7250,7 @@ inline void gcode_M121() { endstops.enable_globally(false); }
RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE); RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE);
// Lift Z axis // Lift Z axis
const float z_lift = code_seen('Z') ? code_value_axis_units(Z_AXIS) : const float z_lift = code_seen('Z') ? code_value_linear_units() :
#if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0 #if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0
FILAMENT_CHANGE_Z_ADD FILAMENT_CHANGE_Z_ADD
#else #else
@ -7264,12 +7264,12 @@ inline void gcode_M121() { endstops.enable_globally(false); }
} }
// Move XY axes to filament change position or given position // Move XY axes to filament change position or given position
destination[X_AXIS] = code_seen('X') ? code_value_axis_units(X_AXIS) : 0 destination[X_AXIS] = code_seen('X') ? code_value_linear_units() : 0
#ifdef FILAMENT_CHANGE_X_POS #ifdef FILAMENT_CHANGE_X_POS
+ FILAMENT_CHANGE_X_POS + FILAMENT_CHANGE_X_POS
#endif #endif
; ;
destination[Y_AXIS] = code_seen('Y') ? code_value_axis_units(Y_AXIS) : 0 destination[Y_AXIS] = code_seen('Y') ? code_value_linear_units() : 0
#ifdef FILAMENT_CHANGE_Y_POS #ifdef FILAMENT_CHANGE_Y_POS
+ FILAMENT_CHANGE_Y_POS + FILAMENT_CHANGE_Y_POS
#endif #endif
@ -7355,10 +7355,6 @@ inline void gcode_M200() {
if (! filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA; if (! filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
} }
} }
else {
//reserved for setting filament diameter via UFID or filament measuring device
return;
}
calculate_volumetric_multipliers(); calculate_volumetric_multipliers();
} }
@ -7374,7 +7370,7 @@ inline void gcode_M201() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
planner.max_acceleration_mm_per_s2[a] = code_value_axis_units(a); planner.max_acceleration_mm_per_s2[a] = code_value_axis_units((AxisEnum)a);
} }
} }
// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner) // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
@ -7384,7 +7380,7 @@ inline void gcode_M201() {
#if 0 // Not used for Sprinter/grbl gen6 #if 0 // Not used for Sprinter/grbl gen6
inline void gcode_M202() { inline void gcode_M202() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value_axis_units(i) * planner.axis_steps_per_mm[i]; if (code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value_axis_units((AxisEnum)i) * planner.axis_steps_per_mm[i];
} }
} }
#endif #endif
@ -7402,7 +7398,7 @@ inline void gcode_M203() {
LOOP_XYZE(i) LOOP_XYZE(i)
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
planner.max_feedrate_mm_s[a] = code_value_axis_units(a); planner.max_feedrate_mm_s[a] = code_value_axis_units((AxisEnum)a);
} }
} }
@ -7449,10 +7445,10 @@ inline void gcode_M205() {
if (code_seen('S')) planner.min_feedrate_mm_s = code_value_linear_units(); if (code_seen('S')) planner.min_feedrate_mm_s = code_value_linear_units();
if (code_seen('T')) planner.min_travel_feedrate_mm_s = code_value_linear_units(); if (code_seen('T')) planner.min_travel_feedrate_mm_s = code_value_linear_units();
if (code_seen('B')) planner.min_segment_time = code_value_millis(); if (code_seen('B')) planner.min_segment_time = code_value_millis();
if (code_seen('X')) planner.max_jerk[X_AXIS] = code_value_axis_units(X_AXIS); if (code_seen('X')) planner.max_jerk[X_AXIS] = code_value_linear_units();
if (code_seen('Y')) planner.max_jerk[Y_AXIS] = code_value_axis_units(Y_AXIS); if (code_seen('Y')) planner.max_jerk[Y_AXIS] = code_value_linear_units();
if (code_seen('Z')) planner.max_jerk[Z_AXIS] = code_value_axis_units(Z_AXIS); if (code_seen('Z')) planner.max_jerk[Z_AXIS] = code_value_linear_units();
if (code_seen('E')) planner.max_jerk[E_AXIS] = code_value_axis_units(E_AXIS); if (code_seen('E')) planner.max_jerk[E_AXIS] = code_value_linear_units();
} }
#if HAS_M206_COMMAND #if HAS_M206_COMMAND
@ -7463,11 +7459,11 @@ inline void gcode_M205() {
inline void gcode_M206() { inline void gcode_M206() {
LOOP_XYZ(i) LOOP_XYZ(i)
if (code_seen(axis_codes[i])) if (code_seen(axis_codes[i]))
set_home_offset((AxisEnum)i, code_value_axis_units(i)); set_home_offset((AxisEnum)i, code_value_linear_units());
#if ENABLED(MORGAN_SCARA) #if ENABLED(MORGAN_SCARA)
if (code_seen('T')) set_home_offset(A_AXIS, code_value_axis_units(A_AXIS)); // Theta if (code_seen('T')) set_home_offset(A_AXIS, code_value_linear_units()); // Theta
if (code_seen('P')) set_home_offset(B_AXIS, code_value_axis_units(B_AXIS)); // Psi if (code_seen('P')) set_home_offset(B_AXIS, code_value_linear_units()); // Psi
#endif #endif
SYNC_PLAN_POSITION_KINEMATIC(); SYNC_PLAN_POSITION_KINEMATIC();
@ -7517,7 +7513,7 @@ inline void gcode_M205() {
#endif #endif
LOOP_XYZ(i) { LOOP_XYZ(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
endstop_adj[i] = code_value_axis_units(i); endstop_adj[i] = code_value_linear_units();
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) { if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("endstop_adj[", axis_codes[i]); SERIAL_ECHOPAIR("endstop_adj[", axis_codes[i]);
@ -7539,7 +7535,7 @@ inline void gcode_M205() {
* M666: For Z Dual Endstop setup, set z axis offset to the z2 axis. * M666: For Z Dual Endstop setup, set z axis offset to the z2 axis.
*/ */
inline void gcode_M666() { inline void gcode_M666() {
if (code_seen('Z')) z_endstop_adj = code_value_axis_units(Z_AXIS); if (code_seen('Z')) z_endstop_adj = code_value_linear_units();
SERIAL_ECHOLNPAIR("Z Endstop Adjustment set to (mm):", z_endstop_adj); SERIAL_ECHOLNPAIR("Z Endstop Adjustment set to (mm):", z_endstop_adj);
} }
@ -7558,7 +7554,7 @@ inline void gcode_M205() {
inline void gcode_M207() { inline void gcode_M207() {
if (code_seen('S')) retract_length = code_value_axis_units(E_AXIS); if (code_seen('S')) retract_length = code_value_axis_units(E_AXIS);
if (code_seen('F')) retract_feedrate_mm_s = MMM_TO_MMS(code_value_axis_units(E_AXIS)); if (code_seen('F')) retract_feedrate_mm_s = MMM_TO_MMS(code_value_axis_units(E_AXIS));
if (code_seen('Z')) retract_zlift = code_value_axis_units(Z_AXIS); if (code_seen('Z')) retract_zlift = code_value_linear_units();
#if EXTRUDERS > 1 #if EXTRUDERS > 1
if (code_seen('W')) retract_length_swap = code_value_axis_units(E_AXIS); if (code_seen('W')) retract_length_swap = code_value_axis_units(E_AXIS);
#endif #endif
@ -7631,11 +7627,11 @@ inline void gcode_M211() {
inline void gcode_M218() { inline void gcode_M218() {
if (get_target_extruder_from_command(218) || target_extruder == 0) return; if (get_target_extruder_from_command(218) || target_extruder == 0) return;
if (code_seen('X')) hotend_offset[X_AXIS][target_extruder] = code_value_axis_units(X_AXIS); if (code_seen('X')) hotend_offset[X_AXIS][target_extruder] = code_value_linear_units();
if (code_seen('Y')) hotend_offset[Y_AXIS][target_extruder] = code_value_axis_units(Y_AXIS); if (code_seen('Y')) hotend_offset[Y_AXIS][target_extruder] = code_value_linear_units();
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER) #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER)
if (code_seen('Z')) hotend_offset[Z_AXIS][target_extruder] = code_value_axis_units(Z_AXIS); if (code_seen('Z')) hotend_offset[Z_AXIS][target_extruder] = code_value_linear_units();
#endif #endif
SERIAL_ECHO_START; SERIAL_ECHO_START;
@ -8285,11 +8281,11 @@ void quickstop_stepper() {
int8_t px = 0, py = 0; int8_t px = 0, py = 0;
float z = 0; float z = 0;
bool hasX, hasY, hasZ, hasI, hasJ; bool hasX, hasY, hasZ, hasI, hasJ;
if ((hasX = code_seen('X'))) px = mbl.probe_index_x(code_value_axis_units(X_AXIS)); if ((hasX = code_seen('X'))) px = mbl.probe_index_x(code_value_linear_units());
if ((hasY = code_seen('Y'))) py = mbl.probe_index_y(code_value_axis_units(Y_AXIS)); if ((hasY = code_seen('Y'))) py = mbl.probe_index_y(code_value_linear_units());
if ((hasI = code_seen('I'))) px = code_value_axis_units(X_AXIS); if ((hasI = code_seen('I'))) px = code_value_linear_units();
if ((hasJ = code_seen('J'))) py = code_value_axis_units(Y_AXIS); if ((hasJ = code_seen('J'))) py = code_value_linear_units();
if ((hasZ = code_seen('Z'))) z = code_value_axis_units(Z_AXIS); if ((hasZ = code_seen('Z'))) z = code_value_linear_units();
if (hasX && hasY && hasZ) { if (hasX && hasY && hasZ) {
@ -8325,9 +8321,9 @@ void quickstop_stepper() {
int8_t px = 0, py = 0; int8_t px = 0, py = 0;
float z = 0; float z = 0;
bool hasI, hasJ, hasZ; bool hasI, hasJ, hasZ;
if ((hasI = code_seen('I'))) px = code_value_axis_units(X_AXIS); if ((hasI = code_seen('I'))) px = code_value_linear_units();
if ((hasJ = code_seen('J'))) py = code_value_axis_units(Y_AXIS); if ((hasJ = code_seen('J'))) py = code_value_linear_units();
if ((hasZ = code_seen('Z'))) z = code_value_axis_units(Z_AXIS); if ((hasZ = code_seen('Z'))) z = code_value_linear_units();
if (hasI && hasJ && hasZ) { if (hasI && hasJ && hasZ) {
if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_X - 1)) { if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_X - 1)) {
@ -8474,7 +8470,7 @@ inline void gcode_M503() {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_ZPROBE_ZOFFSET " "); SERIAL_ECHOPGM(MSG_ZPROBE_ZOFFSET " ");
if (code_seen('Z')) { if (code_seen('Z')) {
const float value = code_value_axis_units(Z_AXIS); const float value = code_value_linear_units();
if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) { if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) {
zprobe_zoffset = value; zprobe_zoffset = value;
refresh_zprobe_zoffset(); refresh_zprobe_zoffset();
@ -8557,7 +8553,7 @@ inline void gcode_M503() {
RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE); RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE);
// Lift Z axis // Lift Z axis
float z_lift = code_seen('Z') ? code_value_axis_units(Z_AXIS) : float z_lift = code_seen('Z') ? code_value_linear_units() :
#if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0 #if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0
FILAMENT_CHANGE_Z_ADD FILAMENT_CHANGE_Z_ADD
#else #else
@ -8572,12 +8568,12 @@ inline void gcode_M503() {
} }
// Move XY axes to filament exchange position // Move XY axes to filament exchange position
if (code_seen('X')) destination[X_AXIS] = code_value_axis_units(X_AXIS); if (code_seen('X')) destination[X_AXIS] = code_value_linear_units();
#ifdef FILAMENT_CHANGE_X_POS #ifdef FILAMENT_CHANGE_X_POS
else destination[X_AXIS] = FILAMENT_CHANGE_X_POS; else destination[X_AXIS] = FILAMENT_CHANGE_X_POS;
#endif #endif
if (code_seen('Y')) destination[Y_AXIS] = code_value_axis_units(Y_AXIS); if (code_seen('Y')) destination[Y_AXIS] = code_value_linear_units();
#ifdef FILAMENT_CHANGE_Y_POS #ifdef FILAMENT_CHANGE_Y_POS
else destination[Y_AXIS] = FILAMENT_CHANGE_Y_POS; else destination[Y_AXIS] = FILAMENT_CHANGE_Y_POS;
#endif #endif
@ -8766,7 +8762,7 @@ inline void gcode_M503() {
case DXC_AUTO_PARK_MODE: case DXC_AUTO_PARK_MODE:
break; break;
case DXC_DUPLICATION_MODE: case DXC_DUPLICATION_MODE:
if (code_seen('X')) duplicate_extruder_x_offset = max(code_value_axis_units(X_AXIS), X2_MIN_POS - x_home_pos(0)); if (code_seen('X')) duplicate_extruder_x_offset = max(code_value_linear_units(), X2_MIN_POS - x_home_pos(0));
if (code_seen('R')) duplicate_extruder_temp_offset = code_value_temp_diff(); if (code_seen('R')) duplicate_extruder_temp_offset = code_value_temp_diff();
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
@ -8801,28 +8797,34 @@ inline void gcode_M503() {
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
/** /**
* M905: Set advance factor * M900: Set and/or Get advance K factor and WH/D ratio
*
* K<factor> Set advance K factor
* R<ratio> Set ratio directly (overrides WH/D)
* W<width> H<height> D<diam> Set ratio from WH/D
*/ */
inline void gcode_M905() { inline void gcode_M900() {
stepper.synchronize(); stepper.synchronize();
const float newK = code_seen('K') ? code_value_float() : -1, const float newK = code_seen('K') ? code_value_float() : -1;
newD = code_seen('D') ? code_value_float() : -1, if (newK >= 0) planner.set_extruder_advance_k(newK);
newW = code_seen('W') ? code_value_float() : -1,
newH = code_seen('H') ? code_value_float() : -1;
if (newK >= 0.0) planner.set_extruder_advance_k(newK); float newR = code_seen('R') ? code_value_float() : -1;
if (newR < 0) {
const float newD = code_seen('D') ? code_value_float() : -1,
newW = code_seen('W') ? code_value_float() : -1,
newH = code_seen('H') ? code_value_float() : -1;
if (newD >= 0 && newW >= 0 && newH >= 0)
newR = newD ? (newW * newH) / (sq(newD * 0.5) * M_PI) : 0;
}
if (newR >= 0) planner.set_advance_ed_ratio(newR);
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNPAIR("Advance factor: ", planner.get_extruder_advance_k()); SERIAL_ECHOPAIR("Advance K=", planner.get_extruder_advance_k());
SERIAL_ECHOPGM(" E/D=");
if (newD >= 0 || newW >= 0 || newH >= 0) { const float ratio = planner.get_advance_ed_ratio();
const float ratio = (!newD || !newW || !newH) ? 0 : (newW * newH) / (sq(newD * 0.5) * M_PI); ratio ? SERIAL_ECHO(ratio) : SERIAL_ECHOPGM("Auto");
planner.set_advance_ed_ratio(ratio); SERIAL_EOL;
SERIAL_ECHO_START;
SERIAL_ECHOPGM("E/D ratio: ");
if (ratio) SERIAL_ECHOLN(ratio); else SERIAL_ECHOLNPGM("Automatic");
}
} }
#endif // LIN_ADVANCE #endif // LIN_ADVANCE
@ -9127,7 +9129,7 @@ inline void gcode_M355() {
* *
*/ */
inline void gcode_M163() { inline void gcode_M163() {
int mix_index = code_seen('S') ? code_value_int() : 0; const int mix_index = code_seen('S') ? code_value_int() : 0;
if (mix_index < MIXING_STEPPERS) { if (mix_index < MIXING_STEPPERS) {
float mix_value = code_seen('P') ? code_value_float() : 0.0; float mix_value = code_seen('P') ? code_value_float() : 0.0;
NOLESS(mix_value, 0.0); NOLESS(mix_value, 0.0);
@ -9144,7 +9146,7 @@ inline void gcode_M355() {
* *
*/ */
inline void gcode_M164() { inline void gcode_M164() {
int tool_index = code_seen('S') ? code_value_int() : 0; const int tool_index = code_seen('S') ? code_value_int() : 0;
if (tool_index < MIXING_VIRTUAL_TOOLS) { if (tool_index < MIXING_VIRTUAL_TOOLS) {
normalize_mix(); normalize_mix();
for (uint8_t i = 0; i < MIXING_STEPPERS; i++) for (uint8_t i = 0; i < MIXING_STEPPERS; i++)
@ -9542,7 +9544,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
tool_change( tool_change(
tmp_extruder, tmp_extruder,
code_seen('F') ? MMM_TO_MMS(code_value_axis_units(X_AXIS)) : 0.0, code_seen('F') ? MMM_TO_MMS(code_value_linear_units()) : 0.0,
(tmp_extruder == active_extruder) || (code_seen('S') && code_value_bool()) (tmp_extruder == active_extruder) || (code_seen('S') && code_value_bool())
); );
@ -10262,8 +10264,8 @@ void process_next_command() {
#endif // DUAL_X_CARRIAGE #endif // DUAL_X_CARRIAGE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
case 905: // M905: Set advance K factor. case 900: // M900: Set advance K factor.
gcode_M905(); gcode_M900();
break; break;
#endif #endif

382
Marlin/configuration_store.cpp

@ -36,7 +36,7 @@
* *
*/ */
#define EEPROM_VERSION "V34" #define EEPROM_VERSION "V35"
// Change EEPROM version if these are changed: // Change EEPROM version if these are changed:
#define EEPROM_OFFSET 100 #define EEPROM_OFFSET 100
@ -67,27 +67,27 @@
* Global Leveling: * Global Leveling:
* 219 z_fade_height (float) * 219 z_fade_height (float)
* *
* Mesh bed leveling: 43 bytes * MESH_BED_LEVELING: 43 bytes
* 223 M420 S from mbl.status (bool) * 223 M420 S from mbl.status (bool)
* 224 mbl.z_offset (float) * 224 mbl.z_offset (float)
* 228 GRID_MAX_POINTS_X (uint8_t) * 228 GRID_MAX_POINTS_X (uint8_t)
* 229 GRID_MAX_POINTS_Y (uint8_t) * 229 GRID_MAX_POINTS_Y (uint8_t)
* 230 G29 S3 XYZ z_values[][] (float x9, up to float x 81) +288 * 230 G29 S3 XYZ z_values[][] (float x9, up to float x 81) +288
* *
* AUTO BED LEVELING 4 bytes * HAS_BED_PROBE: 4 bytes
* 266 M851 zprobe_zoffset (float) * 266 M851 zprobe_zoffset (float)
* *
* ABL_PLANAR (or placeholder): 36 bytes * ABL_PLANAR: 36 bytes
* 270 planner.bed_level_matrix (matrix_3x3 = float x9) * 270 planner.bed_level_matrix (matrix_3x3 = float x9)
* *
* AUTO_BED_LEVELING_BILINEAR (or placeholder): 47 bytes * AUTO_BED_LEVELING_BILINEAR: 47 bytes
* 306 GRID_MAX_POINTS_X (uint8_t) * 306 GRID_MAX_POINTS_X (uint8_t)
* 307 GRID_MAX_POINTS_Y (uint8_t) * 307 GRID_MAX_POINTS_Y (uint8_t)
* 308 bilinear_grid_spacing (int x2) * 308 bilinear_grid_spacing (int x2)
* 312 G29 L F bilinear_start (int x2) * 312 G29 L F bilinear_start (int x2)
* 316 bed_level_grid[][] (float x9, up to float x256) +988 * 316 bed_level_grid[][] (float x9, up to float x256) +988
* *
* DELTA (if deltabot): 48 bytes * DELTA: 48 bytes
* 348 M666 XYZ endstop_adj (float x3) * 348 M666 XYZ endstop_adj (float x3)
* 360 M665 R delta_radius (float) * 360 M665 R delta_radius (float)
* 364 M665 L delta_diagonal_rod (float) * 364 M665 L delta_diagonal_rod (float)
@ -99,7 +99,7 @@
* 388 M665 J delta_tower_angle_trim[B] (float) * 388 M665 J delta_tower_angle_trim[B] (float)
* 392 M665 K delta_tower_angle_trim[C] (float) * 392 M665 K delta_tower_angle_trim[C] (float)
* *
* Z_DUAL_ENDSTOPS (if not deltabot): 48 bytes * Z_DUAL_ENDSTOPS: 48 bytes
* 348 M666 Z z_endstop_adj (float) * 348 M666 Z z_endstop_adj (float)
* --- dummy data (float x11) * --- dummy data (float x11)
* *
@ -136,7 +136,7 @@
* 533 M200 D volumetric_enabled (bool) * 533 M200 D volumetric_enabled (bool)
* 534 M200 T D filament_size (float x5) (T0..3) * 534 M200 T D filament_size (float x5) (T0..3)
* *
* TMC2130 Stepper Current: 20 bytes * HAVE_TMC2130: 20 bytes
* 554 M906 X stepperX current (uint16_t) * 554 M906 X stepperX current (uint16_t)
* 556 M906 Y stepperY current (uint16_t) * 556 M906 Y stepperY current (uint16_t)
* 558 M906 Z stepperZ current (uint16_t) * 558 M906 Z stepperZ current (uint16_t)
@ -149,8 +149,12 @@
* 572 M906 E3 stepperE3 current (uint16_t) * 572 M906 E3 stepperE3 current (uint16_t)
* 576 M906 E4 stepperE4 current (uint16_t) * 576 M906 E4 stepperE4 current (uint16_t)
* *
* 580 Minimum end-point * LIN_ADVANCE: 8 bytes
* 1901 (580 + 36 + 9 + 288 + 988) Maximum end-point * 580 M900 K extruder_advance_k (float)
* 584 M900 WHD advance_ed_ratio (float)
*
* 588 Minimum end-point
* 1909 (588 + 36 + 9 + 288 + 988) Maximum end-point
*/ */
#include "configuration_store.h" #include "configuration_store.h"
@ -570,6 +574,20 @@ void MarlinSettings::postprocess() {
for (uint8_t q = 0; q < 11; ++q) EEPROM_WRITE(val); for (uint8_t q = 0; q < 11; ++q) EEPROM_WRITE(val);
#endif #endif
//
// Linear Advance
//
float extruder_advance_k = 0.0f, advance_ed_ratio = 0.0f;
#if ENABLED(LIN_ADVANCE)
extruder_advance_k = planner.get_extruder_advance_k();
advance_ed_ratio = planner.get_advance_ed_ratio();
#endif
EEPROM_WRITE(extruder_advance_k);
EEPROM_WRITE(advance_ed_ratio);
if (!eeprom_write_error) { if (!eeprom_write_error) {
const uint16_t final_checksum = eeprom_checksum, const uint16_t final_checksum = eeprom_checksum,
@ -900,6 +918,19 @@ void MarlinSettings::postprocess() {
for (uint8_t q = 0; q < 11; q++) EEPROM_READ(val); for (uint8_t q = 0; q < 11; q++) EEPROM_READ(val);
#endif #endif
//
// Linear Advance
//
float extruder_advance_k, advance_ed_ratio;
EEPROM_READ(extruder_advance_k);
EEPROM_READ(advance_ed_ratio);
#if ENABLED(LIN_ADVANCE)
planner.set_extruder_advance_k(extruder_advance_k);
planner.set_advance_ed_ratio(advance_ed_ratio);
#endif
if (eeprom_checksum == stored_checksum) { if (eeprom_checksum == stored_checksum) {
if (eeprom_read_error) if (eeprom_read_error)
reset(); reset();
@ -1155,6 +1186,11 @@ void MarlinSettings::reset() {
#endif #endif
#endif #endif
#if ENABLED(LIN_ADVANCE)
planner.set_extruder_advance_k(LIN_ADVANCE_K);
planner.set_advance_ed_ratio(LIN_ADVANCE_E_D_RATIO);
#endif
postprocess(); postprocess();
SERIAL_ECHO_START; SERIAL_ECHO_START;
@ -1165,6 +1201,13 @@ void MarlinSettings::reset() {
#define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START; }while(0) #define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START; }while(0)
#if ENABLED(INCH_MODE_SUPPORT)
extern float linear_unit_factor;
#define LINEAR_UNIT(N) ((N) / linear_unit_factor)
#else
#define LINEAR_UNIT(N) N
#endif
/** /**
* M503 - Report current settings in RAM * M503 - Report current settings in RAM
* *
@ -1172,113 +1215,168 @@ void MarlinSettings::reset() {
*/ */
void MarlinSettings::report(bool forReplay) { void MarlinSettings::report(bool forReplay) {
/**
* Announce current units, in case inches are being displayed
*/
CONFIG_ECHO_START; CONFIG_ECHO_START;
#if ENABLED(INCH_MODE_SUPPORT)
extern float linear_unit_factor, volumetric_unit_factor;
#define LINEAR_UNIT(N) ((N) / linear_unit_factor)
#define VOLUMETRIC_UNIT(N) ((N) / (volumetric_enabled ? volumetric_unit_factor : linear_unit_factor))
serialprintPGM(linear_unit_factor == 1.0 ? PSTR(" G21 ; Units in mm\n") : PSTR(" G20 ; Units in inches\n"));
#else
#define LINEAR_UNIT(N) N
#define VOLUMETRIC_UNIT(N) N
SERIAL_ECHOLNPGM(" G21 ; Units in mm\n");
#endif
SERIAL_EOL;
/**
* Volumetric extrusion M200
*/
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Steps per unit:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPGM("Filament settings:");
if (volumetric_enabled)
SERIAL_EOL;
else
SERIAL_ECHOLNPGM(" Disabled");
} }
SERIAL_ECHOPAIR(" M92 X", planner.axis_steps_per_mm[X_AXIS]);
SERIAL_ECHOPAIR(" Y", planner.axis_steps_per_mm[Y_AXIS]); CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" Z", planner.axis_steps_per_mm[Z_AXIS]); SERIAL_ECHOPAIR(" M200 D", filament_size[0]);
SERIAL_EOL;
#if EXTRUDERS > 1
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]);
SERIAL_EOL;
#if EXTRUDERS > 2
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
SERIAL_EOL;
#if EXTRUDERS > 3
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
SERIAL_EOL;
#if EXTRUDERS > 4
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T4 D", filament_size[4]);
SERIAL_EOL;
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
if (!volumetric_enabled) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM(" M200 D0");
}
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Steps per unit:");
}
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M92 X", LINEAR_UNIT(planner.axis_steps_per_mm[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.axis_steps_per_mm[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.axis_steps_per_mm[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS) #if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", planner.axis_steps_per_mm[E_AXIS]); SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.axis_steps_per_mm[E_AXIS]));
#endif #endif
SERIAL_EOL; SERIAL_EOL;
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START;
for (uint8_t i = 0; i < E_STEPPERS; i++) { for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M92 T", (int)i); SERIAL_ECHOPAIR(" M92 T", (int)i);
SERIAL_ECHOLNPAIR(" E", planner.axis_steps_per_mm[E_AXIS + i]); SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.axis_steps_per_mm[E_AXIS + i]));
} }
#endif #endif
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Maximum feedrates (units/s):");
} }
SERIAL_ECHOPAIR(" M203 X", planner.max_feedrate_mm_s[X_AXIS]); CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" Y", planner.max_feedrate_mm_s[Y_AXIS]); SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.max_feedrate_mm_s[X_AXIS]));
SERIAL_ECHOPAIR(" Z", planner.max_feedrate_mm_s[Z_AXIS]); SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_feedrate_mm_s[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_feedrate_mm_s[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS) #if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", planner.max_feedrate_mm_s[E_AXIS]); SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_feedrate_mm_s[E_AXIS]));
#endif #endif
SERIAL_EOL; SERIAL_EOL;
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START;
for (uint8_t i = 0; i < E_STEPPERS; i++) { for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M203 T", (int)i); SERIAL_ECHOPAIR(" M203 T", (int)i);
SERIAL_ECHOLNPAIR(" E", planner.max_feedrate_mm_s[E_AXIS + i]); SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.max_feedrate_mm_s[E_AXIS + i]));
} }
#endif #endif
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Maximum Acceleration (units/s2):");
} }
SERIAL_ECHOPAIR(" M201 X", planner.max_acceleration_mm_per_s2[X_AXIS]); CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" Y", planner.max_acceleration_mm_per_s2[Y_AXIS]); SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[X_AXIS]));
SERIAL_ECHOPAIR(" Z", planner.max_acceleration_mm_per_s2[Z_AXIS]); SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS) #if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", planner.max_acceleration_mm_per_s2[E_AXIS]); SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_acceleration_mm_per_s2[E_AXIS]));
#endif #endif
SERIAL_EOL; SERIAL_EOL;
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
SERIAL_ECHO_START;
for (uint8_t i = 0; i < E_STEPPERS; i++) { for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M201 T", (int)i); SERIAL_ECHOPAIR(" M201 T", (int)i);
SERIAL_ECHOLNPAIR(" E", planner.max_acceleration_mm_per_s2[E_AXIS + i]); SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.max_acceleration_mm_per_s2[E_AXIS + i]));
} }
#endif #endif
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Accelerations: P=printing, R=retract and T=travel");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>");
} }
SERIAL_ECHOPAIR(" M204 P", planner.acceleration);
SERIAL_ECHOPAIR(" R", planner.retract_acceleration);
SERIAL_ECHOPAIR(" T", planner.travel_acceleration);
SERIAL_EOL;
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M204 P", LINEAR_UNIT(planner.acceleration));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(planner.retract_acceleration));
SERIAL_ECHOLNPAIR(" T", LINEAR_UNIT(planner.travel_acceleration));
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Advanced: S<min_feedrate> T<min_travel_feedrate> B<min_segment_time_ms> X<max_xy_jerk> Z<max_z_jerk> E<max_e_jerk>");
} }
SERIAL_ECHOPAIR(" M205 S", planner.min_feedrate_mm_s); CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" T", planner.min_travel_feedrate_mm_s); SERIAL_ECHOPAIR(" M205 S", LINEAR_UNIT(planner.min_feedrate_mm_s));
SERIAL_ECHOPAIR(" T", LINEAR_UNIT(planner.min_travel_feedrate_mm_s));
SERIAL_ECHOPAIR(" B", planner.min_segment_time); SERIAL_ECHOPAIR(" B", planner.min_segment_time);
SERIAL_ECHOPAIR(" X", planner.max_jerk[X_AXIS]); SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS]));
SERIAL_ECHOPAIR(" Y", planner.max_jerk[Y_AXIS]); SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", planner.max_jerk[Z_AXIS]); SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS]));
SERIAL_ECHOPAIR(" E", planner.max_jerk[E_AXIS]); SERIAL_ECHOLNPAIR(" E", LINEAR_UNIT(planner.max_jerk[E_AXIS]));
SERIAL_EOL;
#if HAS_M206_COMMAND #if HAS_M206_COMMAND
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Home offset (mm)");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Home offset:");
} }
SERIAL_ECHOPAIR(" M206 X", home_offset[X_AXIS]); CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" Y", home_offset[Y_AXIS]); SERIAL_ECHOPAIR(" M206 X", LINEAR_UNIT(home_offset[X_AXIS]));
SERIAL_ECHOPAIR(" Z", home_offset[Z_AXIS]); SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(home_offset[Y_AXIS]));
SERIAL_EOL; SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(home_offset[Z_AXIS]));
#endif #endif
#if HOTENDS > 1 #if HOTENDS > 1
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Hotend offsets (mm)");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Hotend offsets:");
} }
CONFIG_ECHO_START;
for (uint8_t e = 1; e < HOTENDS; e++) { for (uint8_t e = 1; e < HOTENDS; e++) {
SERIAL_ECHOPAIR(" M218 T", (int)e); SERIAL_ECHOPAIR(" M218 T", (int)e);
SERIAL_ECHOPAIR(" X", hotend_offset[X_AXIS][e]); SERIAL_ECHOPAIR(" X", LINEAR_UNIT(hotend_offset[X_AXIS][e]));
SERIAL_ECHOPAIR(" Y", hotend_offset[Y_AXIS][e]); SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e]));
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER) #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER)
SERIAL_ECHOPAIR(" Z", hotend_offset[Z_AXIS][e]); SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e]));
#endif #endif
SERIAL_EOL; SERIAL_EOL;
} }
@ -1287,12 +1385,13 @@ void MarlinSettings::reset() {
#if ENABLED(MESH_BED_LEVELING) #if ENABLED(MESH_BED_LEVELING)
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Mesh Bed Leveling:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Mesh Bed Leveling:");
} }
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M420 S", mbl.has_mesh() ? 1 : 0); SERIAL_ECHOPAIR(" M420 S", mbl.has_mesh() ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOLNPAIR(" Z", planner.z_fade_height); SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif #endif
SERIAL_EOL; SERIAL_EOL;
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) { for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
@ -1301,7 +1400,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1); SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1);
SERIAL_ECHOPAIR(" Y", (int)py + 1); SERIAL_ECHOPAIR(" Y", (int)py + 1);
SERIAL_ECHOPGM(" Z"); SERIAL_ECHOPGM(" Z");
SERIAL_PROTOCOL_F(mbl.z_values[px][py], 5); SERIAL_PROTOCOL_F(LINEAR_UNIT(mbl.z_values[px][py]), 5);
SERIAL_EOL; SERIAL_EOL;
} }
} }
@ -1309,12 +1408,13 @@ void MarlinSettings::reset() {
#elif ENABLED(AUTO_BED_LEVELING_UBL) #elif ENABLED(AUTO_BED_LEVELING_UBL)
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Unified Bed Leveling:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Unified Bed Leveling:");
} }
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M420 S", ubl.state.active ? 1 : 0); SERIAL_ECHOPAIR(" M420 S", ubl.state.active ? 1 : 0);
//#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) //#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
// SERIAL_ECHOLNPAIR(" Z", ubl.state.g29_correction_fade_height); // SERIAL_ECHOPAIR(" Z", ubl.state.g29_correction_fade_height);
//#endif //#endif
SERIAL_EOL; SERIAL_EOL;
@ -1351,72 +1451,69 @@ void MarlinSettings::reset() {
#elif HAS_ABL #elif HAS_ABL
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Auto Bed Leveling:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Auto Bed Leveling:");
} }
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M420 S", planner.abl_enabled ? 1 : 0); SERIAL_ECHOPAIR(" M420 S", planner.abl_enabled ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOLNPAIR(" Z", planner.z_fade_height); SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif #endif
SERIAL_EOL; SERIAL_EOL;
#endif #endif
#if ENABLED(DELTA) #if ENABLED(DELTA)
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Endstop adjustment (mm):");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Endstop adjustment:");
} }
SERIAL_ECHOPAIR(" M666 X", endstop_adj[X_AXIS]);
SERIAL_ECHOPAIR(" Y", endstop_adj[Y_AXIS]);
SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS]);
SERIAL_EOL;
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M666 X", LINEAR_UNIT(endstop_adj[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(endstop_adj[Y_AXIS]));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(endstop_adj[Z_AXIS]));
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Delta settings: L=diagonal_rod, R=radius, H=height, S=segments_per_second, ABC=diagonal_rod_trim_tower_[123]");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Delta settings: L<diagonal_rod> R<radius> H<height> S<segments_per_s> ABC<diagonal_rod_[123]_trim>");
} }
SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod); CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" R", delta_radius); SERIAL_ECHOPAIR(" M665 L", LINEAR_UNIT(delta_diagonal_rod));
SERIAL_ECHOPAIR(" H", DELTA_HEIGHT + home_offset[Z_AXIS]); SERIAL_ECHOPAIR(" R", LINEAR_UNIT(delta_radius));
SERIAL_ECHOPAIR(" H", LINEAR_UNIT(DELTA_HEIGHT + home_offset[Z_AXIS]));
SERIAL_ECHOPAIR(" S", delta_segments_per_second); SERIAL_ECHOPAIR(" S", delta_segments_per_second);
SERIAL_ECHOPAIR(" A", delta_diagonal_rod_trim[A_AXIS]); SERIAL_ECHOPAIR(" A", LINEAR_UNIT(delta_diagonal_rod_trim[A_AXIS]));
SERIAL_ECHOPAIR(" B", delta_diagonal_rod_trim[B_AXIS]); SERIAL_ECHOPAIR(" B", LINEAR_UNIT(delta_diagonal_rod_trim[B_AXIS]));
SERIAL_ECHOPAIR(" C", delta_diagonal_rod_trim[C_AXIS]); SERIAL_ECHOPAIR(" C", LINEAR_UNIT(delta_diagonal_rod_trim[C_AXIS]));
SERIAL_ECHOPAIR(" I", delta_tower_angle_trim[A_AXIS]); SERIAL_ECHOPAIR(" I", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS]));
SERIAL_ECHOPAIR(" J", delta_tower_angle_trim[B_AXIS]); SERIAL_ECHOPAIR(" J", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS]));
SERIAL_ECHOPAIR(" K", delta_tower_angle_trim[C_AXIS]); SERIAL_ECHOLNPAIR(" K", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS]));
SERIAL_EOL;
#elif ENABLED(Z_DUAL_ENDSTOPS) #elif ENABLED(Z_DUAL_ENDSTOPS)
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Z2 Endstop adjustment (mm):");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Z2 Endstop adjustment:");
} }
SERIAL_ECHOPAIR(" M666 Z", z_endstop_adj); CONFIG_ECHO_START;
SERIAL_EOL; SERIAL_ECHOLNPAIR(" M666 Z", LINEAR_UNIT(z_endstop_adj));
#endif // DELTA #endif // DELTA
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Material heatup parameters:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Material heatup parameters:");
} }
CONFIG_ECHO_START;
for (uint8_t i = 0; i < COUNT(lcd_preheat_hotend_temp); i++) { for (uint8_t i = 0; i < COUNT(lcd_preheat_hotend_temp); i++) {
SERIAL_ECHOPAIR(" M145 S", (int)i); SERIAL_ECHOPAIR(" M145 S", (int)i);
SERIAL_ECHOPAIR(" H", lcd_preheat_hotend_temp[i]); SERIAL_ECHOPAIR(" H", lcd_preheat_hotend_temp[i]);
SERIAL_ECHOPAIR(" B", lcd_preheat_bed_temp[i]); SERIAL_ECHOPAIR(" B", lcd_preheat_bed_temp[i]);
SERIAL_ECHOPAIR(" F", lcd_preheat_fan_speed[i]); SERIAL_ECHOLNPAIR(" F", lcd_preheat_fan_speed[i]);
SERIAL_EOL;
} }
#endif // ULTIPANEL #endif // ULTIPANEL
#if HAS_PID_HEATING #if HAS_PID_HEATING
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("PID settings:"); SERIAL_ECHOLNPGM("PID settings:");
} }
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
@ -1462,113 +1559,69 @@ void MarlinSettings::reset() {
#endif // PIDTEMP || PIDTEMPBED #endif // PIDTEMP || PIDTEMPBED
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("LCD Contrast:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("LCD Contrast:");
} }
SERIAL_ECHOPAIR(" M250 C", lcd_contrast); CONFIG_ECHO_START;
SERIAL_EOL; SERIAL_ECHOLNPAIR(" M250 C", lcd_contrast);
#endif #endif
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Retract: S<length> F<units/m> Z<lift>");
} }
SERIAL_ECHOPAIR(" M207 S", retract_length); CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M207 S", LINEAR_UNIT(retract_length));
#if EXTRUDERS > 1 #if EXTRUDERS > 1
SERIAL_ECHOPAIR(" W", retract_length_swap); SERIAL_ECHOPAIR(" W", LINEAR_UNIT(retract_length_swap));
#endif #endif
SERIAL_ECHOPAIR(" F", MMS_TO_MMM(retract_feedrate_mm_s)); SERIAL_ECHOPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(retract_feedrate_mm_s)));
SERIAL_ECHOPAIR(" Z", retract_zlift); SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(retract_zlift));
SERIAL_EOL;
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Recover: S<length> F<units/m>");
} }
SERIAL_ECHOPAIR(" M208 S", retract_recover_length); CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M208 S", LINEAR_UNIT(retract_recover_length));
#if EXTRUDERS > 1 #if EXTRUDERS > 1
SERIAL_ECHOPAIR(" W", retract_recover_length_swap); SERIAL_ECHOPAIR(" W", LINEAR_UNIT(retract_recover_length_swap));
#endif #endif
SERIAL_ECHOPAIR(" F", MMS_TO_MMM(retract_recover_feedrate_mm_s)); SERIAL_ECHOLNPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(retract_recover_feedrate_mm_s)));
SERIAL_EOL;
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
} }
SERIAL_ECHOPAIR(" M209 S", autoretract_enabled ? 1 : 0);
SERIAL_EOL;
#endif // FWRETRACT
/**
* Volumetric extrusion M200
*/
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOPGM("Filament settings:");
if (volumetric_enabled)
SERIAL_EOL;
else
SERIAL_ECHOLNPGM(" Disabled");
}
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 D", filament_size[0]);
SERIAL_EOL;
#if EXTRUDERS > 1
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]); SERIAL_ECHOLNPAIR(" M209 S", autoretract_enabled ? 1 : 0);
SERIAL_EOL;
#if EXTRUDERS > 2
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
SERIAL_EOL;
#if EXTRUDERS > 3
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
SERIAL_EOL;
#if EXTRUDERS > 4
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T4 D", filament_size[4]);
SERIAL_EOL;
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
if (!volumetric_enabled) { #endif // FWRETRACT
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM(" M200 D0");
}
/** /**
* Auto Bed Leveling * Auto Bed Leveling
*/ */
#if HAS_BED_PROBE #if HAS_BED_PROBE
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Z-Probe Offset (mm):");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Z-Probe Offset (mm):");
} }
SERIAL_ECHOPAIR(" M851 Z", zprobe_zoffset); CONFIG_ECHO_START;
SERIAL_EOL; SERIAL_ECHOLNPAIR(" M851 Z", LINEAR_UNIT(zprobe_zoffset));
#endif #endif
/** /**
* TMC2130 stepper driver current * TMC2130 stepper driver current
*/ */
#if ENABLED(HAVE_TMC2130) #if ENABLED(HAVE_TMC2130)
CONFIG_ECHO_START;
if (!forReplay) { if (!forReplay) {
SERIAL_ECHOLNPGM("Stepper driver current:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Stepper driver current:");
} }
CONFIG_ECHO_START;
SERIAL_ECHO(" M906"); SERIAL_ECHO(" M906");
#if ENABLED(X_IS_TMC2130) #if ENABLED(X_IS_TMC2130)
SERIAL_ECHOPAIR(" X", stepperX.getCurrent()); SERIAL_ECHOPAIR(" X", stepperX.getCurrent());
@ -1602,6 +1655,19 @@ void MarlinSettings::reset() {
#endif #endif
SERIAL_EOL; SERIAL_EOL;
#endif #endif
/**
* Linear Advance
*/
#if ENABLED(LIN_ADVANCE)
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Linear Advance:");
}
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M900 K", planner.get_extruder_advance_k());
SERIAL_ECHOLNPAIR(" R", planner.get_advance_ed_ratio());
#endif
} }
#endif // !DISABLE_M503 #endif // !DISABLE_M503

6
Marlin/example_configurations/Cartesio/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/Felix/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/Hephestos/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@ -614,13 +614,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/K8200/Configuration_adv.h

@ -643,13 +643,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/K8400/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/RigidBot/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/SCARA/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/TAZ4/Configuration_adv.h

@ -638,13 +638,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/TinyBoy2/Configuration_adv.h

@ -633,13 +633,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/WITBOX/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

@ -654,13 +654,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

@ -654,13 +654,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/delta/generic/Configuration_adv.h

@ -651,13 +651,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@ -651,13 +651,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@ -657,13 +657,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@ -651,13 +651,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/makibox/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@ -630,13 +630,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

6
Marlin/example_configurations/wt150/Configuration_adv.h

@ -633,13 +633,15 @@
* to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
* if the slicer is using variable widths or layer heights within one print! * if the slicer is using variable widths or layer heights within one print!
* *
* This option sets the default E:D ratio at startup. Use `M905` to override this value. * This option sets the default E:D ratio at startup. Use `M900` to override this value.
* *
* Example: `M905 W0.4 H0.2 D1.75`, where: * Example: `M900 W0.4 H0.2 D1.75`, where:
* - W is the extrusion width in mm * - W is the extrusion width in mm
* - H is the layer height in mm * - H is the layer height in mm
* - D is the filament diameter in mm * - D is the filament diameter in mm
* *
* Example: `M900 R0.0458` to set the ratio directly.
*
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.

2
Marlin/language_an.h

@ -115,7 +115,7 @@
#define MSG_E5STEPS _UxGT("E5 trangos/mm") #define MSG_E5STEPS _UxGT("E5 trangos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimiento") #define MSG_MOTION _UxGT("Movimiento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("Contraste") #define MSG_CONTRAST _UxGT("Contraste")

2
Marlin/language_bg.h

@ -116,7 +116,7 @@
#define MSG_E5STEPS _UxGT("E5 стъпки/mm") #define MSG_E5STEPS _UxGT("E5 стъпки/mm")
#define MSG_TEMPERATURE _UxGT("Температура") #define MSG_TEMPERATURE _UxGT("Температура")
#define MSG_MOTION _UxGT("Движение") #define MSG_MOTION _UxGT("Движение")
#define MSG_VOLUMETRIC _UxGT("Нишка") #define MSG_FILAMENT _UxGT("Нишка")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Диам. нишка") #define MSG_FILAMENT_DIAM _UxGT("Диам. нишка")
#define MSG_CONTRAST _UxGT("LCD контраст") #define MSG_CONTRAST _UxGT("LCD контраст")

2
Marlin/language_ca.h

@ -120,7 +120,7 @@
#define MSG_E5STEPS _UxGT("E5passos/mm") #define MSG_E5STEPS _UxGT("E5passos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Moviment") #define MSG_MOTION _UxGT("Moviment")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") #define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.")
#define MSG_CONTRAST _UxGT("Contrast de LCD") #define MSG_CONTRAST _UxGT("Contrast de LCD")

2
Marlin/language_cn.h

@ -108,7 +108,7 @@
#define MSG_E5STEPS "E5steps/mm" #define MSG_E5STEPS "E5steps/mm"
#define MSG_TEMPERATURE "\xc9\xd2" #define MSG_TEMPERATURE "\xc9\xd2"
#define MSG_MOTION "\xdf\xb2" #define MSG_MOTION "\xdf\xb2"
#define MSG_VOLUMETRIC "Filament" #define MSG_FILAMENT "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD contrast" #define MSG_CONTRAST "LCD contrast"

2
Marlin/language_cz.h

@ -119,7 +119,7 @@
#define MSG_E5STEPS _UxGT("E5kroku/mm") #define MSG_E5STEPS _UxGT("E5kroku/mm")
#define MSG_TEMPERATURE _UxGT("Teplota") #define MSG_TEMPERATURE _UxGT("Teplota")
#define MSG_MOTION _UxGT("Pohyb") #define MSG_MOTION _UxGT("Pohyb")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Prum.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Prum.")
#define MSG_CONTRAST _UxGT("Kontrast LCD") #define MSG_CONTRAST _UxGT("Kontrast LCD")

2
Marlin/language_da.h

@ -117,7 +117,7 @@
#define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_TEMPERATURE _UxGT("Temperatur")
#define MSG_MOTION _UxGT("Bevægelse") #define MSG_MOTION _UxGT("Bevægelse")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E i mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E i mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("LCD kontrast") #define MSG_CONTRAST _UxGT("LCD kontrast")

2
Marlin/language_de.h

@ -121,7 +121,7 @@
#define MSG_E5STEPS _UxGT("E5 Steps/mm") #define MSG_E5STEPS _UxGT("E5 Steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_TEMPERATURE _UxGT("Temperatur")
#define MSG_MOTION _UxGT("Bewegung") #define MSG_MOTION _UxGT("Bewegung")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")
#define MSG_FILAMENT_DIAM _UxGT("D Fil.") #define MSG_FILAMENT_DIAM _UxGT("D Fil.")
#define MSG_CONTRAST _UxGT("LCD Kontrast") #define MSG_CONTRAST _UxGT("LCD Kontrast")

2
Marlin/language_el-gr.h

@ -115,7 +115,7 @@
#define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ") #define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ")
#define MSG_TEMPERATURE _UxGT("Θερμοκρασία") #define MSG_TEMPERATURE _UxGT("Θερμοκρασία")
#define MSG_MOTION _UxGT("Κίνηση") #define MSG_MOTION _UxGT("Κίνηση")
#define MSG_VOLUMETRIC _UxGT("Νήμα") #define MSG_FILAMENT _UxGT("Νήμα")
#define MSG_VOLUMETRIC_ENABLED _UxGT("Ε σε μμ3") #define MSG_VOLUMETRIC_ENABLED _UxGT("Ε σε μμ3")
#define MSG_FILAMENT_DIAM _UxGT("Διάμετρος νήματος") #define MSG_FILAMENT_DIAM _UxGT("Διάμετρος νήματος")
#define MSG_CONTRAST _UxGT("Κοντράστ LCD") #define MSG_CONTRAST _UxGT("Κοντράστ LCD")

2
Marlin/language_el.h

@ -115,7 +115,7 @@
#define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ") #define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ")
#define MSG_TEMPERATURE _UxGT("Θερμοκρασία") #define MSG_TEMPERATURE _UxGT("Θερμοκρασία")
#define MSG_MOTION _UxGT("Κίνηση") #define MSG_MOTION _UxGT("Κίνηση")
#define MSG_VOLUMETRIC _UxGT("Νήμα") #define MSG_FILAMENT _UxGT("Νήμα")
#define MSG_VOLUMETRIC_ENABLED _UxGT("Ε σε μμ3") #define MSG_VOLUMETRIC_ENABLED _UxGT("Ε σε μμ3")
#define MSG_FILAMENT_DIAM _UxGT("Διάμετρος νήματος") #define MSG_FILAMENT_DIAM _UxGT("Διάμετρος νήματος")
#define MSG_CONTRAST _UxGT("Κοντράστ LCD") #define MSG_CONTRAST _UxGT("Κοντράστ LCD")

7
Marlin/language_en.h

@ -300,8 +300,8 @@
#ifndef MSG_MOTION #ifndef MSG_MOTION
#define MSG_MOTION _UxGT("Motion") #define MSG_MOTION _UxGT("Motion")
#endif #endif
#ifndef MSG_VOLUMETRIC #ifndef MSG_FILAMENT
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#endif #endif
#ifndef MSG_VOLUMETRIC_ENABLED #ifndef MSG_VOLUMETRIC_ENABLED
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
@ -309,6 +309,9 @@
#ifndef MSG_FILAMENT_DIAM #ifndef MSG_FILAMENT_DIAM
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#endif #endif
#ifndef MSG_ADVANCE_K
#define MSG_ADVANCE_K _UxGT("Advance K")
#endif
#ifndef MSG_CONTRAST #ifndef MSG_CONTRAST
#define MSG_CONTRAST _UxGT("LCD contrast") #define MSG_CONTRAST _UxGT("LCD contrast")
#endif #endif

2
Marlin/language_es.h

@ -119,7 +119,7 @@
#define MSG_E5STEPS _UxGT("E5 pasos/mm") #define MSG_E5STEPS _UxGT("E5 pasos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimiento") #define MSG_MOTION _UxGT("Movimiento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("Contraste") #define MSG_CONTRAST _UxGT("Contraste")

2
Marlin/language_eu.h

@ -106,7 +106,7 @@
#define MSG_E5STEPS _UxGT("E5 pausoak/mm") #define MSG_E5STEPS _UxGT("E5 pausoak/mm")
#define MSG_TEMPERATURE _UxGT("Tenperatura") #define MSG_TEMPERATURE _UxGT("Tenperatura")
#define MSG_MOTION _UxGT("Mugimendua") #define MSG_MOTION _UxGT("Mugimendua")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("LCD kontrastea") #define MSG_CONTRAST _UxGT("LCD kontrastea")

2
Marlin/language_fi.h

@ -107,7 +107,7 @@
#define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Lämpötila") #define MSG_TEMPERATURE _UxGT("Lämpötila")
#define MSG_MOTION _UxGT("Liike") #define MSG_MOTION _UxGT("Liike")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("LCD kontrasti") #define MSG_CONTRAST _UxGT("LCD kontrasti")

2
Marlin/language_fr.h

@ -120,7 +120,7 @@
#define MSG_E5STEPS _UxGT("E5pas/mm") #define MSG_E5STEPS _UxGT("E5pas/mm")
#define MSG_TEMPERATURE _UxGT("Tempzrature") #define MSG_TEMPERATURE _UxGT("Tempzrature")
#define MSG_MOTION _UxGT("Mouvement") #define MSG_MOTION _UxGT("Mouvement")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") #define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.")
#define MSG_CONTRAST _UxGT("Contraste LCD") #define MSG_CONTRAST _UxGT("Contraste LCD")

2
Marlin/language_gl.h

@ -116,7 +116,7 @@
#define MSG_E5STEPS _UxGT("E5pasos/mm") #define MSG_E5STEPS _UxGT("E5pasos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movemento") #define MSG_MOTION _UxGT("Movemento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. fil.") #define MSG_FILAMENT_DIAM _UxGT("Diam. fil.")
#define MSG_CONTRAST _UxGT("Constraste LCD") #define MSG_CONTRAST _UxGT("Constraste LCD")

2
Marlin/language_hr.h

@ -115,7 +115,7 @@
#define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperature") #define MSG_TEMPERATURE _UxGT("Temperature")
#define MSG_MOTION _UxGT("Gibanje") #define MSG_MOTION _UxGT("Gibanje")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("Kontrast LCD-a") #define MSG_CONTRAST _UxGT("Kontrast LCD-a")

2
Marlin/language_it.h

@ -123,7 +123,7 @@
#define MSG_E5STEPS _UxGT("E5passi/mm") #define MSG_E5STEPS _UxGT("E5passi/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimento") #define MSG_MOTION _UxGT("Movimento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. filo") #define MSG_FILAMENT_DIAM _UxGT("Diam. filo")
#define MSG_CONTRAST _UxGT("Contrasto LCD") #define MSG_CONTRAST _UxGT("Contrasto LCD")

2
Marlin/language_kana.h

@ -151,7 +151,7 @@
#endif #endif
#define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "オンド" ("Temperature") #define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "オンド" ("Temperature")
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ウゴキセッテイ" ("Motion") #define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ウゴキセッテイ" ("Motion")
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "フィラメント" ("Filament") #define MSG_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4" // "フィラメント" ("Filament")
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm3"
#if LCD_WIDTH >= 20 #if LCD_WIDTH >= 20
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "フィラメントチョッケイ" ("Fil. Dia.") #define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "フィラメントチョッケイ" ("Fil. Dia.")

2
Marlin/language_kana_utf8.h

@ -125,7 +125,7 @@
#define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("オンド") // "Temperature" #define MSG_TEMPERATURE _UxGT("オンド") // "Temperature"
#define MSG_MOTION _UxGT("ウゴキセッテイ") // "Motion" #define MSG_MOTION _UxGT("ウゴキセッテイ") // "Motion"
#define MSG_VOLUMETRIC _UxGT("フィラメント") // "Filament" #define MSG_FILAMENT _UxGT("フィラメント") // "Filament"
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("フィラメントチョッケイ") // "Fil. Dia." #define MSG_FILAMENT_DIAM _UxGT("フィラメントチョッケイ") // "Fil. Dia."
#define MSG_CONTRAST _UxGT("LCDコントラスト") // "LCD contrast" #define MSG_CONTRAST _UxGT("LCDコントラスト") // "LCD contrast"

2
Marlin/language_nl.h

@ -115,7 +115,7 @@
#define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperatuur") #define MSG_TEMPERATURE _UxGT("Temperatuur")
#define MSG_MOTION _UxGT("Beweging") #define MSG_MOTION _UxGT("Beweging")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("LCD contrast") #define MSG_CONTRAST _UxGT("LCD contrast")

2
Marlin/language_pl.h

@ -115,7 +115,7 @@
#define MSG_E5STEPS _UxGT("krokiE5/mm") #define MSG_E5STEPS _UxGT("krokiE5/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Ruch") #define MSG_MOTION _UxGT("Ruch")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3")
#define MSG_FILAMENT_DIAM _UxGT("Sr. fil.") #define MSG_FILAMENT_DIAM _UxGT("Sr. fil.")
#define MSG_CONTRAST _UxGT("Kontrast LCD") #define MSG_CONTRAST _UxGT("Kontrast LCD")

2
Marlin/language_pt-br.h

@ -108,7 +108,7 @@
#define MSG_E5STEPS "E5/mm" #define MSG_E5STEPS "E5/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento" #define MSG_FILAMENT "Filamento"
#define MSG_VOLUMETRIC_ENABLED "Extr. em mm3" #define MSG_VOLUMETRIC_ENABLED "Extr. em mm3"
#define MSG_FILAMENT_DIAM "Diametro Fil." #define MSG_FILAMENT_DIAM "Diametro Fil."
#define MSG_CONTRAST "Contraste" #define MSG_CONTRAST "Contraste"

2
Marlin/language_pt-br_utf8.h

@ -108,7 +108,7 @@
#define MSG_E5STEPS _UxGT("E5/mm") #define MSG_E5STEPS _UxGT("E5/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimento") #define MSG_MOTION _UxGT("Movimento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("Extr. em mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("Extr. em mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diametro Fil.") #define MSG_FILAMENT_DIAM _UxGT("Diametro Fil.")
#define MSG_CONTRAST _UxGT("Contraste") #define MSG_CONTRAST _UxGT("Contraste")

2
Marlin/language_pt.h

@ -112,7 +112,7 @@
#define MSG_E5STEPS "E5 passo/mm" #define MSG_E5STEPS "E5 passo/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento" #define MSG_FILAMENT "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E em mm3" #define MSG_VOLUMETRIC_ENABLED "E em mm3"
#define MSG_FILAMENT_DIAM "Fil. Diam." #define MSG_FILAMENT_DIAM "Fil. Diam."
#define MSG_CONTRAST "Contraste" #define MSG_CONTRAST "Contraste"

2
Marlin/language_pt_utf8.h

@ -112,7 +112,7 @@
#define MSG_E5STEPS _UxGT("E5 passo/mm") #define MSG_E5STEPS _UxGT("E5 passo/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimento") #define MSG_MOTION _UxGT("Movimento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E em mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E em mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Diam.") #define MSG_FILAMENT_DIAM _UxGT("Fil. Diam.")
#define MSG_CONTRAST _UxGT("Contraste") #define MSG_CONTRAST _UxGT("Contraste")

2
Marlin/language_ru.h

@ -111,7 +111,7 @@
#define MSG_E4STEPS _UxGT("E4 шаг/мм") #define MSG_E4STEPS _UxGT("E4 шаг/мм")
#define MSG_TEMPERATURE _UxGT("Температура") #define MSG_TEMPERATURE _UxGT("Температура")
#define MSG_MOTION _UxGT("Механика") #define MSG_MOTION _UxGT("Механика")
#define MSG_VOLUMETRIC _UxGT("Пруток") #define MSG_FILAMENT _UxGT("Пруток")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E в mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E в mm3")
#define MSG_FILAMENT_DIAM _UxGT("Диаметр прутка") #define MSG_FILAMENT_DIAM _UxGT("Диаметр прутка")
#define MSG_CONTRAST _UxGT("Контраст LCD") #define MSG_CONTRAST _UxGT("Контраст LCD")

6
Marlin/language_test.h

@ -148,7 +148,7 @@
#define MSG_MAIN STRG_OKTAL_2 #define MSG_MAIN STRG_OKTAL_2
#define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_TEMPERATURE STRG_OKTAL_3
#define MSG_MOTION STRG_OKTAL_4 #define MSG_MOTION STRG_OKTAL_4
#define MSG_VOLUMETRIC STRG_OKTAL_5 #define MSG_FILAMENT STRG_OKTAL_5
#define MSG_CONTRAST STRG_OKTAL_6 #define MSG_CONTRAST STRG_OKTAL_6
#define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7
@ -183,7 +183,7 @@
#define MSG_MAIN STRG_OKTAL_2 #define MSG_MAIN STRG_OKTAL_2
#define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_TEMPERATURE STRG_OKTAL_3
#define MSG_MOTION STRG_OKTAL_4 #define MSG_MOTION STRG_OKTAL_4
#define MSG_VOLUMETRIC STRG_OKTAL_5 #define MSG_FILAMENT STRG_OKTAL_5
#define MSG_CONTRAST STRG_OKTAL_6 #define MSG_CONTRAST STRG_OKTAL_6
#define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7
@ -218,7 +218,7 @@
#define MSG_MAIN STRG_OKTAL_2 #define MSG_MAIN STRG_OKTAL_2
#define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_TEMPERATURE STRG_OKTAL_3
#define MSG_MOTION STRG_OKTAL_4 #define MSG_MOTION STRG_OKTAL_4
#define MSG_VOLUMETRIC STRG_OKTAL_5 #define MSG_FILAMENT STRG_OKTAL_5
#define MSG_CONTRAST STRG_OKTAL_6 #define MSG_CONTRAST STRG_OKTAL_6
#define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7

2
Marlin/language_tr.h

@ -120,7 +120,7 @@
#define MSG_E5STEPS _UxGT("E5steps/mm") // E4steps/mm #define MSG_E5STEPS _UxGT("E5steps/mm") // E4steps/mm
#define MSG_TEMPERATURE _UxGT("Sıcaklık") // Sıcaklık #define MSG_TEMPERATURE _UxGT("Sıcaklık") // Sıcaklık
#define MSG_MOTION _UxGT("Hareket") // Hareket #define MSG_MOTION _UxGT("Hareket") // Hareket
#define MSG_VOLUMETRIC _UxGT("Filaman") // Filaman #define MSG_FILAMENT _UxGT("Filaman") // Filaman
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") // E in mm3 #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") // E in mm3
#define MSG_FILAMENT_DIAM _UxGT("Fil. Çap") // Fil. Çap #define MSG_FILAMENT_DIAM _UxGT("Fil. Çap") // Fil. Çap
#define MSG_CONTRAST _UxGT("LCD Kontrast") // LCD Kontrast #define MSG_CONTRAST _UxGT("LCD Kontrast") // LCD Kontrast

2
Marlin/language_uk.h

@ -116,7 +116,7 @@
#define MSG_E5STEPS _UxGT("E5кроків/мм") #define MSG_E5STEPS _UxGT("E5кроків/мм")
#define MSG_TEMPERATURE _UxGT("Температура") #define MSG_TEMPERATURE _UxGT("Температура")
#define MSG_MOTION _UxGT("Рух") #define MSG_MOTION _UxGT("Рух")
#define MSG_VOLUMETRIC _UxGT("Волокно") #define MSG_FILAMENT _UxGT("Волокно")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E в мм3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E в мм3")
#define MSG_FILAMENT_DIAM _UxGT("Діам. волок.") #define MSG_FILAMENT_DIAM _UxGT("Діам. волок.")
#define MSG_CONTRAST _UxGT("контраст LCD") #define MSG_CONTRAST _UxGT("контраст LCD")

2
Marlin/language_zh_CN.h

@ -108,7 +108,7 @@
#define MSG_ESTEPS _UxGT("挤出机步数/mm") //"Esteps/mm" #define MSG_ESTEPS _UxGT("挤出机步数/mm") //"Esteps/mm"
#define MSG_TEMPERATURE _UxGT("温度") //"Temperature" #define MSG_TEMPERATURE _UxGT("温度") //"Temperature"
#define MSG_MOTION _UxGT("运动") //"Motion" #define MSG_MOTION _UxGT("运动") //"Motion"
#define MSG_VOLUMETRIC _UxGT("丝料测容") //"Filament" lcd_control_volumetric_menu #define MSG_FILAMENT _UxGT("丝料测容") //"Filament" lcd_control_volumetric_menu
#define MSG_VOLUMETRIC_ENABLED _UxGT("测容积mm³") //"E in mm3" volumetric_enabled #define MSG_VOLUMETRIC_ENABLED _UxGT("测容积mm³") //"E in mm3" volumetric_enabled
#define MSG_FILAMENT_DIAM _UxGT("丝料直径") //"Fil. Dia." #define MSG_FILAMENT_DIAM _UxGT("丝料直径") //"Fil. Dia."
#define MSG_CONTRAST _UxGT("LCD对比度") //"LCD contrast" #define MSG_CONTRAST _UxGT("LCD对比度") //"LCD contrast"

2
Marlin/language_zh_TW.h

@ -108,7 +108,7 @@
#define MSG_ESTEPS _UxGT("擠出機步數/mm") //"Esteps/mm" #define MSG_ESTEPS _UxGT("擠出機步數/mm") //"Esteps/mm"
#define MSG_TEMPERATURE _UxGT("溫度") //"Temperature" #define MSG_TEMPERATURE _UxGT("溫度") //"Temperature"
#define MSG_MOTION _UxGT("運動") //"Motion" #define MSG_MOTION _UxGT("運動") //"Motion"
#define MSG_VOLUMETRIC _UxGT("絲料測容") //"Filament" lcd_control_volumetric_menu #define MSG_FILAMENT _UxGT("絲料測容") //"Filament" lcd_control_volumetric_menu
#define MSG_VOLUMETRIC_ENABLED _UxGT("測容積mm³") //"E in mm3" volumetric_enabled #define MSG_VOLUMETRIC_ENABLED _UxGT("測容積mm³") //"E in mm3" volumetric_enabled
#define MSG_FILAMENT_DIAM _UxGT("絲料直徑") //"Fil. Dia." #define MSG_FILAMENT_DIAM _UxGT("絲料直徑") //"Fil. Dia."
#define MSG_CONTRAST _UxGT("LCD對比度") //"LCD contrast" #define MSG_CONTRAST _UxGT("LCD對比度") //"LCD contrast"

5
Marlin/planner.h

@ -267,9 +267,10 @@ class Planner {
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
static void set_extruder_advance_k(const float &k) { extruder_advance_k = k; }; static void set_extruder_advance_k(float k) { extruder_advance_k = k; };
static float get_extruder_advance_k() { return extruder_advance_k; }; static float get_extruder_advance_k() { return extruder_advance_k; };
static void set_advance_ed_ratio(const float &ratio) { advance_ed_ratio = ratio; }; static void set_advance_ed_ratio(float ratio) { advance_ed_ratio = ratio; };
static float get_advance_ed_ratio() { return advance_ed_ratio; };
#endif #endif
/** /**

429
Marlin/ultralcd.cpp

@ -90,50 +90,25 @@ uint16_t max_display_update_time = 0;
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
// place-holders for Ki and Kd edits #ifndef TALL_FONT_CORRECTION
float raw_Ki, raw_Kd; #define TALL_FONT_CORRECTION 0
/**
* REVERSE_MENU_DIRECTION
*
* To reverse the menu direction we need a general way to reverse
* the direction of the encoder everywhere. So encoderDirection is
* added to allow the encoder to go the other way.
*
* This behavior is limited to scrolling Menus and SD card listings,
* and is disabled in other contexts.
*/
#if ENABLED(REVERSE_MENU_DIRECTION)
int8_t encoderDirection = 1;
#define ENCODER_DIRECTION_NORMAL() (encoderDirection = 1)
#define ENCODER_DIRECTION_MENUS() (encoderDirection = -1)
#else
#define ENCODER_DIRECTION_NORMAL() ;
#define ENCODER_DIRECTION_MENUS() ;
#endif #endif
int8_t encoderDiff; // updated from interrupt context and added to encoderPosition every LCD update // Function pointer to menu functions.
typedef void (*screenFunc_t)();
millis_t manual_move_start_time = 0; #if HAS_POWER_SWITCH
int8_t manual_move_axis = (int8_t)NO_AXIS; extern bool powersupply;
#if EXTRUDERS > 1
int8_t manual_move_e_index = 0;
#else
#define manual_move_e_index 0
#endif #endif
bool encoderRateMultiplierEnabled;
int32_t lastEncoderMovementMillis;
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
#include "ubl.h" #include "ubl.h"
#endif #endif
#if HAS_POWER_SWITCH ////////////////////////////////////////////
extern bool powersupply; ///////////////// Menu Tree ////////////////
#endif ////////////////////////////////////////////
const float manual_feedrate_mm_m[] = MANUAL_FEEDRATE;
void lcd_main_menu(); void lcd_main_menu();
void lcd_tune_menu(); void lcd_tune_menu();
void lcd_prepare_menu(); void lcd_prepare_menu();
@ -143,14 +118,7 @@ uint16_t max_display_update_time = 0;
void lcd_control_temperature_preheat_material1_settings_menu(); void lcd_control_temperature_preheat_material1_settings_menu();
void lcd_control_temperature_preheat_material2_settings_menu(); void lcd_control_temperature_preheat_material2_settings_menu();
void lcd_control_motion_menu(); void lcd_control_motion_menu();
void lcd_control_volumetric_menu(); void lcd_control_filament_menu();
#if ENABLED(DAC_STEPPER_CURRENT)
void dac_driver_commit();
void dac_driver_getValues();
void lcd_dac_menu();
void lcd_dac_write_eeprom();
#endif
#if ENABLED(LCD_INFO_MENU) #if ENABLED(LCD_INFO_MENU)
#if ENABLED(PRINTCOUNTER) #if ENABLED(PRINTCOUNTER)
@ -173,6 +141,13 @@ uint16_t max_display_update_time = 0;
void lcd_filament_change_resume_message(); void lcd_filament_change_resume_message();
#endif #endif
#if ENABLED(DAC_STEPPER_CURRENT)
void dac_driver_commit();
void dac_driver_getValues();
void lcd_dac_menu();
void lcd_dac_write_eeprom();
#endif
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
void lcd_set_contrast(); void lcd_set_contrast();
#endif #endif
@ -189,35 +164,40 @@ uint16_t max_display_update_time = 0;
#include "mesh_bed_leveling.h" #include "mesh_bed_leveling.h"
#endif #endif
// Function pointer to menu functions. ////////////////////////////////////////////
typedef void (*screenFunc_t)(); //////////// Menu System Actions ///////////
////////////////////////////////////////////
// Different types of actions that can be used in menu items.
#define menu_action_back(dummy) _menu_action_back() #define menu_action_back(dummy) _menu_action_back()
void _menu_action_back(); void _menu_action_back();
void menu_action_submenu(screenFunc_t data); void menu_action_submenu(screenFunc_t data);
void menu_action_gcode(const char* pgcode); void menu_action_gcode(const char* pgcode);
void menu_action_function(screenFunc_t data); void menu_action_function(screenFunc_t data);
#define DECLARE_MENU_EDIT_TYPE(_type, _name) \
bool _menu_edit_ ## _name(); \
void menu_edit_ ## _name(); \
void menu_edit_callback_ ## _name(); \
void _menu_action_setting_edit_ ## _name(const char * const pstr, _type* const ptr, const _type minValue, const _type maxValue); \
void menu_action_setting_edit_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue); \
void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback); \
void _menu_action_setting_edit_accessor_ ## _name(const char * const pstr, _type (*pget)(), void (*pset)(_type), const _type minValue, const _type maxValue); \
void menu_action_setting_edit_accessor_ ## _name(const char * const pstr, _type (*pget)(), void (*pset)(_type), const _type minValue, const _type maxValue); \
typedef void _name##_void
DECLARE_MENU_EDIT_TYPE(int, int3);
DECLARE_MENU_EDIT_TYPE(float, float3);
DECLARE_MENU_EDIT_TYPE(float, float32);
DECLARE_MENU_EDIT_TYPE(float, float43);
DECLARE_MENU_EDIT_TYPE(float, float5);
DECLARE_MENU_EDIT_TYPE(float, float51);
DECLARE_MENU_EDIT_TYPE(float, float52);
DECLARE_MENU_EDIT_TYPE(float, float62);
DECLARE_MENU_EDIT_TYPE(unsigned long, long5);
void menu_action_setting_edit_bool(const char* pstr, bool* ptr); void menu_action_setting_edit_bool(const char* pstr, bool* ptr);
void menu_action_setting_edit_int3(const char* pstr, int* ptr, int minValue, int maxValue);
void menu_action_setting_edit_float3(const char* pstr, float* ptr, float minValue, float maxValue);
void menu_action_setting_edit_float32(const char* pstr, float* ptr, float minValue, float maxValue);
void menu_action_setting_edit_float43(const char* pstr, float* ptr, float minValue, float maxValue);
void menu_action_setting_edit_float5(const char* pstr, float* ptr, float minValue, float maxValue);
void menu_action_setting_edit_float51(const char* pstr, float* ptr, float minValue, float maxValue);
void menu_action_setting_edit_float52(const char* pstr, float* ptr, float minValue, float maxValue);
void menu_action_setting_edit_float62(const char* pstr, float* ptr, float minValue, float maxValue);
void menu_action_setting_edit_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue);
void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc); void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc);
void menu_action_setting_edit_callback_int3(const char* pstr, int* ptr, int minValue, int maxValue, screenFunc_t callbackFunc); void menu_action_setting_edit_accessor_bool(const char* pstr, bool (*pget)(), void (*pset)(bool));
void menu_action_setting_edit_callback_float3(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc);
void menu_action_setting_edit_callback_float32(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc);
void menu_action_setting_edit_callback_float43(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc);
void menu_action_setting_edit_callback_float5(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc);
void menu_action_setting_edit_callback_float51(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc);
void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc);
void menu_action_setting_edit_callback_float62(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc);
void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, screenFunc_t callbackFunc);
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
void lcd_sdcard_menu(); void lcd_sdcard_menu();
@ -225,7 +205,9 @@ uint16_t max_display_update_time = 0;
void menu_action_sddirectory(const char* filename, char* longFilename); void menu_action_sddirectory(const char* filename, char* longFilename);
#endif #endif
/* Helper macros for menus */ ////////////////////////////////////////////
//////////// Menu System Macros ////////////
////////////////////////////////////////////
#ifndef ENCODER_FEEDRATE_DEADZONE #ifndef ENCODER_FEEDRATE_DEADZONE
#define ENCODER_FEEDRATE_DEADZONE 10 #define ENCODER_FEEDRATE_DEADZONE 10
@ -237,59 +219,6 @@ uint16_t max_display_update_time = 0;
#define ENCODER_PULSES_PER_STEP 1 #define ENCODER_PULSES_PER_STEP 1
#endif #endif
#ifndef TALL_FONT_CORRECTION
#define TALL_FONT_CORRECTION 0
#endif
/**
* START_SCREEN_OR_MENU generates init code for a screen or menu
*
* encoderLine is the position based on the encoder
* encoderTopLine is the top menu line to display
* _lcdLineNr is the index of the LCD line (e.g., 0-3)
* _menuLineNr is the menu item to draw and process
* _thisItemNr is the index of each MENU_ITEM or STATIC_ITEM
* _countedItems is the total number of items in the menu (after one call)
*/
#define START_SCREEN_OR_MENU(LIMIT) \
ENCODER_DIRECTION_MENUS(); \
encoderRateMultiplierEnabled = false; \
if (encoderPosition > 0x8000) encoderPosition = 0; \
static int8_t _countedItems = 0; \
int8_t encoderLine = encoderPosition / (ENCODER_STEPS_PER_MENU_ITEM); \
if (_countedItems > 0 && encoderLine >= _countedItems - (LIMIT)) { \
encoderLine = max(0, _countedItems - (LIMIT)); \
encoderPosition = encoderLine * (ENCODER_STEPS_PER_MENU_ITEM); \
}
#define SCREEN_OR_MENU_LOOP() \
int8_t _menuLineNr = encoderTopLine, _thisItemNr; \
for (int8_t _lcdLineNr = 0; _lcdLineNr < LCD_HEIGHT - (TALL_FONT_CORRECTION); _lcdLineNr++, _menuLineNr++) { \
_thisItemNr = 0
/**
* START_SCREEN Opening code for a screen having only static items.
* Do simplified scrolling of the entire screen.
*
* START_MENU Opening code for a screen with menu items.
* Scroll as-needed to keep the selected line in view.
*/
#define START_SCREEN() \
START_SCREEN_OR_MENU(LCD_HEIGHT - (TALL_FONT_CORRECTION)); \
encoderTopLine = encoderLine; \
bool _skipStatic = false; \
SCREEN_OR_MENU_LOOP()
#define START_MENU() \
START_SCREEN_OR_MENU(1); \
screen_changed = false; \
NOMORE(encoderTopLine, encoderLine); \
if (encoderLine >= encoderTopLine + LCD_HEIGHT - (TALL_FONT_CORRECTION)) { \
encoderTopLine = encoderLine - (LCD_HEIGHT - (TALL_FONT_CORRECTION) - 1); \
} \
bool _skipStatic = true; \
SCREEN_OR_MENU_LOOP()
/** /**
* MENU_ITEM generates draw & handler code for a menu item, potentially calling: * MENU_ITEM generates draw & handler code for a menu item, potentially calling:
* *
@ -347,17 +276,11 @@ uint16_t max_display_update_time = 0;
} \ } \
++_thisItemNr ++_thisItemNr
#define END_SCREEN() \
} \
_countedItems = _thisItemNr
#define END_MENU() \
} \
_countedItems = _thisItemNr; \
UNUSED(_skipStatic)
#if ENABLED(ENCODER_RATE_MULTIPLIER) #if ENABLED(ENCODER_RATE_MULTIPLIER)
bool encoderRateMultiplierEnabled;
#define ENCODER_RATE_MULTIPLY(F) (encoderRateMultiplierEnabled = F)
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value //#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
/** /**
@ -370,55 +293,155 @@ uint16_t max_display_update_time = 0;
_MENU_ITEM_PART_2(type, ## __VA_ARGS__); \ _MENU_ITEM_PART_2(type, ## __VA_ARGS__); \
} while(0) } while(0)
#endif //ENCODER_RATE_MULTIPLIER #else // !ENCODER_RATE_MULTIPLIER
#define ENCODER_RATE_MULTIPLY(F) NOOP
#endif // !ENCODER_RATE_MULTIPLIER
#define MENU_ITEM_DUMMY() do { _thisItemNr++; } while(0) #define MENU_ITEM_DUMMY() do { _thisItemNr++; } while(0)
#define MENU_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__)
#define MENU_ITEM_EDIT_CALLBACK(type, label, ...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_ITEM_EDIT_CALLBACK(type, label, ...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__)
#define MENU_ITEM_EDIT_ACCESSOR(type, label, ...) MENU_ITEM(setting_edit_accessor_ ## type, label, PSTR(label), ## __VA_ARGS__)
#if ENABLED(ENCODER_RATE_MULTIPLIER) #if ENABLED(ENCODER_RATE_MULTIPLIER)
#define MENU_MULTIPLIER_ITEM_EDIT(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_MULTIPLIER_ITEM_EDIT(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__)
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__)
#define MENU_MULTIPLIER_ITEM_EDIT_ACCESSOR(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_accessor_ ## type, label, PSTR(label), ## __VA_ARGS__)
#else //!ENCODER_RATE_MULTIPLIER #else //!ENCODER_RATE_MULTIPLIER
#define MENU_MULTIPLIER_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_MULTIPLIER_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__)
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, ...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, ...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__)
#define MENU_MULTIPLIER_ITEM_EDIT_ACCESSOR(type, label, ...) MENU_ITEM(setting_edit_accessor_ ## type, label, PSTR(label), ## __VA_ARGS__)
#endif //!ENCODER_RATE_MULTIPLIER #endif //!ENCODER_RATE_MULTIPLIER
/** Used variables to keep track of the menu */ /**
volatile uint8_t buttons; //the last checked buttons in a bit array. * START_SCREEN_OR_MENU generates init code for a screen or menu
#if ENABLED(REPRAPWORLD_KEYPAD) *
volatile uint8_t buttons_reprapworld_keypad; // to store the keypad shift register values * encoderLine is the position based on the encoder
#endif * encoderTopLine is the top menu line to display
* _lcdLineNr is the index of the LCD line (e.g., 0-3)
* _menuLineNr is the menu item to draw and process
* _thisItemNr is the index of each MENU_ITEM or STATIC_ITEM
* _countedItems is the total number of items in the menu (after one call)
*/
#define START_SCREEN_OR_MENU(LIMIT) \
ENCODER_DIRECTION_MENUS(); \
ENCODER_RATE_MULTIPLY(false); \
if (encoderPosition > 0x8000) encoderPosition = 0; \
static int8_t _countedItems = 0; \
int8_t encoderLine = encoderPosition / (ENCODER_STEPS_PER_MENU_ITEM); \
if (_countedItems > 0 && encoderLine >= _countedItems - (LIMIT)) { \
encoderLine = max(0, _countedItems - (LIMIT)); \
encoderPosition = encoderLine * (ENCODER_STEPS_PER_MENU_ITEM); \
}
#if ENABLED(LCD_HAS_SLOW_BUTTONS) #define SCREEN_OR_MENU_LOOP() \
volatile uint8_t slow_buttons; // Bits of the pressed buttons. int8_t _menuLineNr = encoderTopLine, _thisItemNr; \
for (int8_t _lcdLineNr = 0; _lcdLineNr < LCD_HEIGHT - (TALL_FONT_CORRECTION); _lcdLineNr++, _menuLineNr++) { \
_thisItemNr = 0
/**
* START_SCREEN Opening code for a screen having only static items.
* Do simplified scrolling of the entire screen.
*
* START_MENU Opening code for a screen with menu items.
* Scroll as-needed to keep the selected line in view.
*/
#define START_SCREEN() \
START_SCREEN_OR_MENU(LCD_HEIGHT - (TALL_FONT_CORRECTION)); \
encoderTopLine = encoderLine; \
bool _skipStatic = false; \
SCREEN_OR_MENU_LOOP()
#define START_MENU() \
START_SCREEN_OR_MENU(1); \
screen_changed = false; \
NOMORE(encoderTopLine, encoderLine); \
if (encoderLine >= encoderTopLine + LCD_HEIGHT - (TALL_FONT_CORRECTION)) { \
encoderTopLine = encoderLine - (LCD_HEIGHT - (TALL_FONT_CORRECTION) - 1); \
} \
bool _skipStatic = true; \
SCREEN_OR_MENU_LOOP()
#define END_SCREEN() \
} \
_countedItems = _thisItemNr
#define END_MENU() \
} \
_countedItems = _thisItemNr; \
UNUSED(_skipStatic)
////////////////////////////////////////////
///////////// Global Variables /////////////
////////////////////////////////////////////
/**
* REVERSE_MENU_DIRECTION
*
* To reverse the menu direction we need a general way to reverse
* the direction of the encoder everywhere. So encoderDirection is
* added to allow the encoder to go the other way.
*
* This behavior is limited to scrolling Menus and SD card listings,
* and is disabled in other contexts.
*/
#if ENABLED(REVERSE_MENU_DIRECTION)
int8_t encoderDirection = 1;
#define ENCODER_DIRECTION_NORMAL() (encoderDirection = 1)
#define ENCODER_DIRECTION_MENUS() (encoderDirection = -1)
#else
#define ENCODER_DIRECTION_NORMAL() ;
#define ENCODER_DIRECTION_MENUS() ;
#endif #endif
int8_t encoderTopLine; /* scroll offset in the current menu */
millis_t next_button_update_ms; // Encoder Movement
uint8_t lastEncoderBits; volatile int8_t encoderDiff; // Updated in lcd_buttons_update, added to encoderPosition every LCD update
uint32_t encoderPosition; uint32_t encoderPosition;
#if PIN_EXISTS(SD_DETECT) millis_t lastEncoderMovementMillis = 0;
uint8_t lcd_sd_status;
// Button States
bool lcd_clicked, wait_for_unclick;
volatile uint8_t buttons;
millis_t next_button_update_ms;
#if ENABLED(REPRAPWORLD_KEYPAD)
volatile uint8_t buttons_reprapworld_keypad;
#endif
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
volatile uint8_t slow_buttons;
#endif #endif
// Menu System Navigation
screenFunc_t currentScreen = lcd_status_screen;
int8_t encoderTopLine;
typedef struct { typedef struct {
screenFunc_t menu_function; screenFunc_t menu_function;
uint32_t encoder_position; uint32_t encoder_position;
} menuPosition; } menuPosition;
menuPosition screen_history[6];
uint8_t screen_history_depth = 0;
bool screen_changed, defer_return_to_status;
screenFunc_t currentScreen = lcd_status_screen; // pointer to the currently active menu handler // Value Editing
const char *editLabel;
void *editValue, *editSetter;
int32_t minEditValue, maxEditValue;
screenFunc_t callbackFunc;
menuPosition screen_history[10]; // Manual Moves
uint8_t screen_history_depth = 0; const float manual_feedrate_mm_m[] = MANUAL_FEEDRATE;
bool screen_changed; millis_t manual_move_start_time = 0;
int8_t manual_move_axis = (int8_t)NO_AXIS;
#if EXTRUDERS > 1
int8_t manual_move_e_index = 0;
#else
#define manual_move_e_index 0
#endif
// LCD and menu clicks #if PIN_EXISTS(SD_DETECT)
bool lcd_clicked, wait_for_unclick, defer_return_to_status; uint8_t lcd_sd_status;
#endif
// Variables used when editing values. #if ENABLED(PIDTEMP)
const char* editLabel; float raw_Ki, raw_Kd; // place-holders for Ki and Kd edits
void* editValue; #endif
int32_t minEditValue, maxEditValue;
screenFunc_t callbackFunc; // call this after editing
/** /**
* General function to go directly to a screen * General function to go directly to a screen
@ -519,7 +542,7 @@ void lcd_status_screen() {
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
ENCODER_DIRECTION_NORMAL(); ENCODER_DIRECTION_NORMAL();
encoderRateMultiplierEnabled = false; ENCODER_RATE_MULTIPLY(false);
#endif #endif
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
@ -2105,7 +2128,7 @@ void kill_screen(const char* lcd_msg) {
MENU_BACK(MSG_MAIN); MENU_BACK(MSG_MAIN);
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_volumetric_menu); MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu);
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
//MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63); //MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
@ -2177,28 +2200,28 @@ void kill_screen(const char* lcd_msg) {
PID_PARAM(Kd, e) = scalePID_d(raw_Kd); PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
thermalManager.updatePID(); thermalManager.updatePID();
} }
#define _PIDTEMP_BASE_FUNCTIONS(N) \ #define _DEFINE_PIDTEMP_BASE_FUNCS(N) \
void copy_and_scalePID_i_E ## N() { copy_and_scalePID_i(N); } \ void copy_and_scalePID_i_E ## N() { copy_and_scalePID_i(N); } \
void copy_and_scalePID_d_E ## N() { copy_and_scalePID_d(N); } void copy_and_scalePID_d_E ## N() { copy_and_scalePID_d(N); }
#if ENABLED(PID_AUTOTUNE_MENU) #if ENABLED(PID_AUTOTUNE_MENU)
#define _PIDTEMP_FUNCTIONS(N) \ #define DEFINE_PIDTEMP_FUNCS(N) \
_PIDTEMP_BASE_FUNCTIONS(N); \ _DEFINE_PIDTEMP_BASE_FUNCS(N); \
void lcd_autotune_callback_E ## N() { _lcd_autotune(N); } void lcd_autotune_callback_E ## N() { _lcd_autotune(N); } typedef void _pid_##N##_void
#else #else
#define _PIDTEMP_FUNCTIONS(N) _PIDTEMP_BASE_FUNCTIONS(N) #define DEFINE_PIDTEMP_FUNCS(N) _DEFINE_PIDTEMP_BASE_FUNCS(N) typedef void _pid_##N##_void
#endif #endif
_PIDTEMP_FUNCTIONS(0) DEFINE_PIDTEMP_FUNCS(0);
#if ENABLED(PID_PARAMS_PER_HOTEND) #if ENABLED(PID_PARAMS_PER_HOTEND)
#if HOTENDS > 1 #if HOTENDS > 1
_PIDTEMP_FUNCTIONS(1) DEFINE_PIDTEMP_FUNCS(1);
#if HOTENDS > 2 #if HOTENDS > 2
_PIDTEMP_FUNCTIONS(2) DEFINE_PIDTEMP_FUNCS(2);
#if HOTENDS > 3 #if HOTENDS > 3
_PIDTEMP_FUNCTIONS(3) DEFINE_PIDTEMP_FUNCS(3);
#if HOTENDS > 4 #if HOTENDS > 4
_PIDTEMP_FUNCTIONS(4) DEFINE_PIDTEMP_FUNCS(4);
#endif // HOTENDS > 4 #endif // HOTENDS > 4
#endif // HOTENDS > 3 #endif // HOTENDS > 3
#endif // HOTENDS > 2 #endif // HOTENDS > 2
@ -2543,10 +2566,14 @@ void kill_screen(const char* lcd_msg) {
* "Control" > "Filament" submenu * "Control" > "Filament" submenu
* *
*/ */
void lcd_control_volumetric_menu() { void lcd_control_filament_menu() {
START_MENU(); START_MENU();
MENU_BACK(MSG_CONTROL); MENU_BACK(MSG_CONTROL);
#if ENABLED(LIN_ADVANCE)
MENU_ITEM_EDIT_ACCESSOR(float3, MSG_ADVANCE_K, planner.get_extruder_advance_k, planner.set_extruder_advance_k, 0, 999);
#endif
MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers); MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers);
if (volumetric_enabled) { if (volumetric_enabled) {
@ -2647,7 +2674,7 @@ void kill_screen(const char* lcd_msg) {
void lcd_sdcard_menu() { void lcd_sdcard_menu() {
ENCODER_DIRECTION_MENUS(); ENCODER_DIRECTION_MENUS();
if (!lcdDrawUpdate && !lcd_clicked) return; // nothing to do (so don't thrash the SD card) if (!lcdDrawUpdate && !lcd_clicked) return; // nothing to do (so don't thrash the SD card)
uint16_t fileCnt = card.getnrfilenames(); const uint16_t fileCnt = card.getnrfilenames();
START_MENU(); START_MENU();
MENU_BACK(MSG_MAIN); MENU_BACK(MSG_MAIN);
card.getWorkDirName(); card.getWorkDirName();
@ -2662,11 +2689,11 @@ void kill_screen(const char* lcd_msg) {
for (uint16_t i = 0; i < fileCnt; i++) { for (uint16_t i = 0; i < fileCnt; i++) {
if (_menuLineNr == _thisItemNr) { if (_menuLineNr == _thisItemNr) {
#if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA) const uint16_t nr =
int nr = fileCnt - 1 - i; #if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA)
#else fileCnt - 1 -
int nr = i; #endif
#endif i;
#if ENABLED(SDCARD_SORT_ALPHA) #if ENABLED(SDCARD_SORT_ALPHA)
card.getfilename_sorted(nr); card.getfilename_sorted(nr);
@ -3091,9 +3118,9 @@ void kill_screen(const char* lcd_msg) {
* *
* Functions for editing single values * Functions for editing single values
* *
* The "menu_edit_type" macro generates the functions needed to edit a numerical value. * The "DEFINE_MENU_EDIT_TYPE" macro generates the functions needed to edit a numerical value.
* *
* For example, menu_edit_type(int, int3, itostr3, 1) expands into these functions: * For example, DEFINE_MENU_EDIT_TYPE(int, int3, itostr3, 1) expands into these functions:
* *
* bool _menu_edit_int3(); * bool _menu_edit_int3();
* void menu_edit_int3(); // edit int (interactively) * void menu_edit_int3(); // edit int (interactively)
@ -3101,6 +3128,8 @@ void kill_screen(const char* lcd_msg) {
* void _menu_action_setting_edit_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue); * void _menu_action_setting_edit_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue);
* void menu_action_setting_edit_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue); * void menu_action_setting_edit_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue);
* void menu_action_setting_edit_callback_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue, const screenFunc_t callback); // edit int with callback * void menu_action_setting_edit_callback_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue, const screenFunc_t callback); // edit int with callback
* void _menu_action_setting_edit_accessor_int3(const char * const pstr, int (*pget)(), void (*pset)(int), const int minValue, const int maxValue);
* void menu_action_setting_edit_accessor_int3(const char * const pstr, int (*pget)(), void (*pset)(int), const int minValue, const int maxValue); // edit int via pget and pset accessor functions
* *
* You can then use one of the menu macros to present the edit interface: * You can then use one of the menu macros to present the edit interface:
* MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999) * MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999)
@ -3112,8 +3141,11 @@ void kill_screen(const char* lcd_msg) {
* Also: MENU_MULTIPLIER_ITEM_EDIT, MENU_ITEM_EDIT_CALLBACK, and MENU_MULTIPLIER_ITEM_EDIT_CALLBACK * Also: MENU_MULTIPLIER_ITEM_EDIT, MENU_ITEM_EDIT_CALLBACK, and MENU_MULTIPLIER_ITEM_EDIT_CALLBACK
* *
* menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) * menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999)
*
* Values that are get/set via functions (As opposed to global variables) can use the accessor form:
* MENU_ITEM_EDIT_ACCESSOR(int3, MSG_SPEED, get_feedrate_percentage, set_feedrate_percentage, 10, 999)
*/ */
#define menu_edit_type(_type, _name, _strFunc, _scale) \ #define DEFINE_MENU_EDIT_TYPE(_type, _name, _strFunc, _scale) \
bool _menu_edit_ ## _name () { \ bool _menu_edit_ ## _name () { \
ENCODER_DIRECTION_NORMAL(); \ ENCODER_DIRECTION_NORMAL(); \
if ((int32_t)encoderPosition < 0) encoderPosition = 0; \ if ((int32_t)encoderPosition < 0) encoderPosition = 0; \
@ -3121,7 +3153,11 @@ void kill_screen(const char* lcd_msg) {
if (lcdDrawUpdate) \ if (lcdDrawUpdate) \
lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale))); \ lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale))); \
if (lcd_clicked) { \ if (lcd_clicked) { \
*((_type*)editValue) = ((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale); \ _type value = ((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale); \
if (editValue != NULL) \
*((_type*)editValue) = value; \
else if (editSetter != NULL) \
((void (*)(_type))editSetter)(value); \
lcd_goto_previous_menu(); \ lcd_goto_previous_menu(); \
} \ } \
return lcd_clicked; \ return lcd_clicked; \
@ -3135,6 +3171,7 @@ void kill_screen(const char* lcd_msg) {
\ \
editLabel = pstr; \ editLabel = pstr; \
editValue = ptr; \ editValue = ptr; \
editSetter = NULL; \
minEditValue = minValue * _scale; \ minEditValue = minValue * _scale; \
maxEditValue = maxValue * _scale - minEditValue; \ maxEditValue = maxValue * _scale - minEditValue; \
encoderPosition = (*ptr) * _scale - minEditValue; \ encoderPosition = (*ptr) * _scale - minEditValue; \
@ -3142,23 +3179,39 @@ void kill_screen(const char* lcd_msg) {
void menu_action_setting_edit_ ## _name (const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue) { \ void menu_action_setting_edit_ ## _name (const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue) { \
_menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \ _menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \
currentScreen = menu_edit_ ## _name; \ currentScreen = menu_edit_ ## _name; \
}\ } \
void menu_action_setting_edit_callback_ ## _name (const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback) { \ void menu_action_setting_edit_callback_ ## _name (const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback) { \
_menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \ _menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \
currentScreen = menu_edit_callback_ ## _name; \ currentScreen = menu_edit_callback_ ## _name; \
callbackFunc = callback; \ callbackFunc = callback; \
} \ } \
void _menu_action_setting_edit_accessor_ ## _name (const char * const pstr, _type (*pget)(), void (*pset)(_type), const _type minValue, const _type maxValue) { \
lcd_save_previous_screen(); \
\
lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; \
\
editLabel = pstr; \
editValue = NULL; \
editSetter = pset; \
minEditValue = minValue * _scale; \
maxEditValue = maxValue * _scale - minEditValue; \
encoderPosition = pget() * _scale - minEditValue; \
} \
void menu_action_setting_edit_accessor_ ## _name (const char * const pstr, _type (*pget)(), void (*pset)(_type), const _type minValue, const _type maxValue) { \
_menu_action_setting_edit_accessor_ ## _name(pstr, pget, pset, minValue, maxValue); \
currentScreen = menu_edit_ ## _name; \
} \
typedef void _name typedef void _name
menu_edit_type(int, int3, itostr3, 1); DEFINE_MENU_EDIT_TYPE(int, int3, itostr3, 1);
menu_edit_type(float, float3, ftostr3, 1.0); DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0);
menu_edit_type(float, float32, ftostr32, 100.0); DEFINE_MENU_EDIT_TYPE(float, float32, ftostr32, 100.0);
menu_edit_type(float, float43, ftostr43sign, 1000.0); DEFINE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000.0);
menu_edit_type(float, float5, ftostr5rj, 0.01); DEFINE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01);
menu_edit_type(float, float51, ftostr51sign, 10.0); DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0);
menu_edit_type(float, float52, ftostr52sign, 100.0); DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52sign, 100.0);
menu_edit_type(float, float62, ftostr62rj, 100.0); DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0);
menu_edit_type(unsigned long, long5, ftostr5rj, 0.01); DEFINE_MENU_EDIT_TYPE(unsigned long, long5, ftostr5rj, 0.01);
/** /**
* *
@ -3252,6 +3305,11 @@ void kill_screen(const char* lcd_msg) {
menu_action_setting_edit_bool(pstr, ptr); menu_action_setting_edit_bool(pstr, ptr);
(*callback)(); (*callback)();
} }
void menu_action_setting_edit_accessor_bool(const char* pstr, bool (*pget)(), void (*pset)(bool)) {
UNUSED(pstr);
pset(!pget());
lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW;
}
#endif // ULTIPANEL #endif // ULTIPANEL
@ -3422,7 +3480,7 @@ void lcd_update() {
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
bool sd_status = IS_SD_INSERTED; const bool sd_status = IS_SD_INSERTED;
if (sd_status != lcd_sd_status && lcd_detected()) { if (sd_status != lcd_sd_status && lcd_detected()) {
if (sd_status) { if (sd_status) {
@ -3445,7 +3503,7 @@ void lcd_update() {
#endif //SDSUPPORT && SD_DETECT_PIN #endif //SDSUPPORT && SD_DETECT_PIN
millis_t ms = millis(); const millis_t ms = millis();
if (ELAPSED(ms, next_lcd_update_ms) if (ELAPSED(ms, next_lcd_update_ms)
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
|| drawing_screen || drawing_screen
@ -3715,6 +3773,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
* Warning: This function is called from interrupt context! * Warning: This function is called from interrupt context!
*/ */
void lcd_buttons_update() { void lcd_buttons_update() {
static uint8_t lastEncoderBits;
millis_t now = millis(); millis_t now = millis();
if (ELAPSED(now, next_button_update_ms)) { if (ELAPSED(now, next_button_update_ms)) {

42
Marlin/ultralcd_impl_DOGM.h

@ -771,27 +771,31 @@ static void lcd_implementation_status_screen() {
#define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false) #define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false)
#define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true) #define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true)
#define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data))) #define DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(_type, _name, _strFunc) \
#define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data))) inline void lcd_implementation_drawmenu_setting_edit_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \
#define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data))) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, _strFunc(*(data))); \
#define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43sign(*(data))) } \
#define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data))) inline void lcd_implementation_drawmenu_setting_edit_callback_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \
#define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52sign(*(data))) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, _strFunc(*(data))); \
#define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51sign(*(data))) } \
#define lcd_implementation_drawmenu_setting_edit_float62(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr62rj(*(data))) inline void lcd_implementation_drawmenu_setting_edit_accessor_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type (*pget)(), void (*pset)(_type), ...) { \
#define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data))) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, _strFunc(pget())); \
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) } \
typedef void _name##_void
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int, int3, itostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float43, ftostr43sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float5, ftostr5rj);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(long, long5, ftostr5rj);
#define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data))) #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43sign(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52sign(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51sign(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float62(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr62rj(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_accessor_bool(sel, row, pstr, pstr2, pget, pset) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
void lcd_implementation_drawedit(const char* const pstr, const char* const value=NULL) { void lcd_implementation_drawedit(const char* const pstr, const char* const value=NULL) {
const uint8_t labellen = lcd_strlen_P(pstr), const uint8_t labellen = lcd_strlen_P(pstr),

43
Marlin/ultralcd_impl_HD44780.h

@ -874,28 +874,31 @@ static void lcd_implementation_status_screen() {
lcd_printPGM(data); lcd_printPGM(data);
} }
#define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', itostr3(*(data))) #define DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(_type, _name, _strFunc) \
#define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr3(*(data))) inline void lcd_implementation_drawmenu_setting_edit_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \
#define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr32(*(data))) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(*(data))); \
#define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr43sign(*(data))) } \
#define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5rj(*(data))) inline void lcd_implementation_drawmenu_setting_edit_callback_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \
#define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr52sign(*(data))) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(*(data))); \
#define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr51sign(*(data))) } \
#define lcd_implementation_drawmenu_setting_edit_float62(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr62rj(*(data))) inline void lcd_implementation_drawmenu_setting_edit_accessor_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type (*pget)(), void (*pset)(_type), ...) { \
#define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5rj(*(data))) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(pget())); \
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) } \
typedef void _name##_void
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int, int3, itostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float43, ftostr43sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float5, ftostr5rj);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(long, long5, ftostr5rj);
//Add version for callback functions #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr43sign(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5rj(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr52sign(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr51sign(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float62(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr62rj(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5rj(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_accessor_bool(sel, row, pstr, pstr2, pget, pset, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
void lcd_implementation_drawedit(const char* pstr, const char* const value=NULL) { void lcd_implementation_drawedit(const char* pstr, const char* const value=NULL) {
lcd.setCursor(1, 1); lcd.setCursor(1, 1);

Loading…
Cancel
Save