diff --git a/.travis.yml b/.travis.yml
index 900d438ee3..eacedee8f1 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -90,10 +90,10 @@ script:
   - opt_enable PIDTEMPBED
   - build_marlin
   #
-  # Test a "Fix Mounted" Probe
+  # Test a "Fix Mounted" Probe along with Safe Homing
   #
   - restore_configs
-  - opt_enable FIX_MOUNTED_PROBE
+  - opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING
   - build_marlin
   #
   # ...with AUTO_BED_LEVELING_FEATURE & DEBUG_LEVELING_FEATURE
diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h
index 8ecf49ebe0..ad7d23cc44 100644
--- a/Marlin/Conditionals.h
+++ b/Marlin/Conditionals.h
@@ -371,15 +371,6 @@
     #define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
     #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
     #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
-
-    #ifndef XY_TRAVEL_SPEED
-      #ifdef HOMING_FEEDRATE_XYZ
-        #define XY_TRAVEL_SPEED HOMING_FEEDRATE_XYZ
-      #else
-        #define XY_TRAVEL_SPEED 4000
-      #endif
-    #endif
-
   #endif
 
   #define HAS_Z_SERVO_ENDSTOP (defined(Z_ENDSTOP_SERVO_NR) && Z_ENDSTOP_SERVO_NR >= 0)
@@ -784,8 +775,12 @@
     #ifndef Z_PROBE_OFFSET_RANGE_MAX
       #define Z_PROBE_OFFSET_RANGE_MAX 20
     #endif
-    #ifndef XY_TRAVEL_SPEED
-      #define XY_TRAVEL_SPEED 4000
+    #ifndef XY_PROBE_SPEED
+      #ifdef HOMING_FEEDRATE_XYZ
+        #define XY_PROBE_SPEED HOMING_FEEDRATE_XYZ
+      #else
+        #define XY_PROBE_SPEED 4000
+      #endif
     #endif
   #endif
 
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 13f855fc35..a55c878c19 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -456,6 +456,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -667,8 +670,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index c9172e71b5..ad83f42ea1 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -367,8 +367,13 @@ static uint8_t target_extruder;
 #endif
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
-  int xy_travel_speed = XY_TRAVEL_SPEED;
+  int xy_probe_speed = XY_PROBE_SPEED;
   bool bed_leveling_in_progress = false;
+  #define XY_PROBE_FEEDRATE xy_probe_speed
+#elif defined(XY_PROBE_SPEED)
+  #define XY_PROBE_FEEDRATE XY_PROBE_SPEED
+#else
+  #define XY_PROBE_FEEDRATE (min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60)
 #endif
 
 #if ENABLED(Z_DUAL_ENDSTOPS) && DISABLED(DELTA)
@@ -1633,13 +1638,7 @@ static void setup_for_endstop_move() {
 
     #if ENABLED(DELTA)
 
-      feedrate =
-        #if ENABLED(AUTO_BED_LEVELING_FEATURE)
-          xy_travel_speed
-        #else
-          min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60
-        #endif
-      ;
+      feedrate = XY_PROBE_FEEDRATE;
 
       destination[X_AXIS] = x;
       destination[Y_AXIS] = y;
@@ -1658,13 +1657,7 @@ static void setup_for_endstop_move() {
       line_to_current_position();
       stepper.synchronize();
 
-      feedrate =
-        #if ENABLED(AUTO_BED_LEVELING_FEATURE)
-          xy_travel_speed
-        #else
-          min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60
-        #endif
-      ;
+      feedrate = XY_PROBE_FEEDRATE;
 
       current_position[X_AXIS] = x;
       current_position[Y_AXIS] = y;
@@ -2981,7 +2974,8 @@ inline void gcode_G28() {
             destination[X_AXIS] = round(Z_SAFE_HOMING_X_POINT - (X_PROBE_OFFSET_FROM_EXTRUDER));
             destination[Y_AXIS] = round(Z_SAFE_HOMING_Y_POINT - (Y_PROBE_OFFSET_FROM_EXTRUDER));
             destination[Z_AXIS] = current_position[Z_AXIS]; //z is already at the right height
-            feedrate = XY_TRAVEL_SPEED;
+
+            feedrate = XY_PROBE_FEEDRATE;
 
             #if ENABLED(DEBUG_LEVELING_FEATURE)
               if (DEBUGGING(LEVELING)) {
@@ -3403,7 +3397,7 @@ inline void gcode_G28() {
         }
       #endif
 
-      xy_travel_speed = code_seen('S') ? (int)code_value_linear_units() : XY_TRAVEL_SPEED;
+      xy_probe_speed = code_seen('S') ? (int)code_value_linear_units() : XY_PROBE_SPEED;
 
       int left_probe_bed_position = code_seen('L') ? (int)code_value_axis_units(X_AXIS) : LEFT_PROBE_BED_POSITION,
           right_probe_bed_position = code_seen('R') ? (int)code_value_axis_units(X_AXIS) : RIGHT_PROBE_BED_POSITION,
@@ -6564,8 +6558,8 @@ inline void gcode_T(uint8_t tmp_extruder) {
     }
     else {
       feedrate =
-        #ifdef XY_TRAVEL_SPEED
-          XY_TRAVEL_SPEED
+        #ifdef XY_PROBE_SPEED
+          XY_PROBE_SPEED
         #else
           min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60
         #endif
diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h
index 8d2edc5d3c..a757f8a292 100644
--- a/Marlin/SanityCheck.h
+++ b/Marlin/SanityCheck.h
@@ -623,6 +623,8 @@
   #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
 #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
   #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
+#elif defined(XY_TRAVEL_SPEED)
+  #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
 #endif
 
 #endif //SANITYCHECK_H
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 84794bd98a..5eebcb077d 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -455,6 +455,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -666,8 +669,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index cab1522c09..fce00f7e06 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -438,6 +438,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -649,8 +652,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 322b36f19e..4881d29a03 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -436,6 +436,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -647,8 +650,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 59a111d4fd..91d879da46 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -448,6 +448,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -659,8 +662,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index e74c1afde3..dce0c97eef 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -450,6 +450,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 15  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -661,8 +664,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 2  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 16ae40da10..0431ff3b32 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -473,6 +473,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -684,8 +687,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index a2492565c2..b84730898c 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -456,6 +456,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -667,8 +670,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 5cbf98f9fa..7d84255153 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -450,6 +450,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -661,8 +664,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 1da70ab1b4..7bb2c7d7b4 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -464,6 +464,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -675,8 +678,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index fc7805553e..fbaed6a81d 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -477,6 +477,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -688,8 +691,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 7712caab3b..1fa1f66b30 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -448,6 +448,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -659,8 +662,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 8225450f7b..1d24232325 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -456,6 +456,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -667,8 +670,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index 1f57ead7e5..527e917f90 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -498,6 +498,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 4000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 //#define Z_PROBE_ALLEN_KEY
@@ -510,32 +513,32 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (XY_TRAVEL_SPEED)/2
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (XY_PROBE_SPEED)/2
 
   #define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
   #define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00
   #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
-  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe
   #define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00
   #define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0
-  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED)/2
+  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/2
 
   #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
   #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
   #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -750,8 +753,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index acfe15c187..c870c8a10b 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -498,6 +498,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 4000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 //#define Z_PROBE_ALLEN_KEY
@@ -509,27 +512,27 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_TRAVEL_SPEED)/10
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10
 
   #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
   #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
   #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
   #define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
   #define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
-  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED)/10
+  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10
 
   #define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
   #define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
   #define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
-  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -744,8 +747,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 34fcddc73c..2052ccf672 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -498,6 +498,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 4000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 #define Z_PROBE_ALLEN_KEY
@@ -510,29 +513,29 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_TRAVEL_SPEED/10)
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED/10)
 
   #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20
   // Move the probe into position
   #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0
   #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
   #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
   // Move the nozzle down further to push the probe into retracted position.
   #define Z_PROBE_ALLEN_KEY_STOW_2_X  Z_PROBE_ALLEN_KEY_STOW_1_X
   #define Z_PROBE_ALLEN_KEY_STOW_2_Y  Z_PROBE_ALLEN_KEY_STOW_1_Y
   #define Z_PROBE_ALLEN_KEY_STOW_2_Z  (Z_PROBE_ALLEN_KEY_STOW_1_Z-Z_PROBE_ALLEN_KEY_STOW_DEPTH)
-  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED/10)
+  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED/10)
   // Raise things back up slightly so we don't bump into anything
   #define Z_PROBE_ALLEN_KEY_STOW_3_X  Z_PROBE_ALLEN_KEY_STOW_2_X
   #define Z_PROBE_ALLEN_KEY_STOW_3_Y  Z_PROBE_ALLEN_KEY_STOW_2_Y
   #define Z_PROBE_ALLEN_KEY_STOW_3_Z  (Z_PROBE_ALLEN_KEY_STOW_1_Z+Z_PROBE_ALLEN_KEY_STOW_DEPTH)
-  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_TRAVEL_SPEED/2)
+  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED/2)
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -747,8 +750,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 10bc948871..64c242bb93 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -489,6 +489,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed.
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -17.25  // Increase this if the first layer is too thin (remember: it's a negative number so increase means closer to zero).
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 #define Z_PROBE_ALLEN_KEY
@@ -501,32 +504,32 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z Z_PROBE_ALLEN_KEY_DEPLOY_1_Z
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (XY_TRAVEL_SPEED)/2
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (XY_PROBE_SPEED)/2
 
   #define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
   #define Z_PROBE_ALLEN_KEY_STOW_1_Y -125.00
   #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
-  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X // move down to retract probe
   #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y
   #define Z_PROBE_ALLEN_KEY_STOW_2_Z 0.0
-  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED)/2
+  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/2
 
   #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
   #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
   #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -741,8 +744,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 1c295bd519..a992ffbf37 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -496,6 +496,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0     // Z probe to nozzle Y offset: -front +behind
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3     // Z probe to nozzle Z offset: -below (always!)
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
 //#define Z_PROBE_ALLEN_KEY
@@ -507,27 +510,27 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-  //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_TRAVEL_SPEED)/10
+  //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10
 
   //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
   //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
   //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-  //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
 
   //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
   //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
   //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
-  //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED)/10
+  //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10
 
   //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
   //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
   //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
-  //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_TRAVEL_SPEED
+  //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -742,8 +745,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 10 // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 76bc85ccab..af2b9f9f97 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -459,6 +459,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -670,8 +673,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index e79d722cc5..efbc931ccc 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -446,6 +446,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
 //
 // Allen Key Probe is defined in the Delta example configurations.
 //
@@ -657,8 +660,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
-
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.