32 micro

Marlin/Configuration.h

@@ -743,7 +743,7 @@
  * Override with M92
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {  80.5, 80.5, 400, 415 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {  161.0, 161.0, 800, 830 }
 
 /**
  * Default Max Feed Rate (mm/s)
@@ -763,7 +763,7 @@
  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 1500, 1500, 100, 800 }
+#define DEFAULT_MAX_ACCELERATION      { 1300, 1300, 100, 800 }
 
 #define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -779,7 +779,7 @@
  *   M204 T    Travel Acceleration
  */
 // @efim-a-efim - decreased E0 acceleration to make it less noisy (yes, even with TMC2208 drivers)
-#define DEFAULT_ACCELERATION          1150    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          1100    // X, Y, Z and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  800    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1200    // X, Y, Z acceleration for travel (non printing) moves
 
@@ -793,15 +793,15 @@
  */
 #define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
-  #define DEFAULT_XJERK 17.0
+  #define DEFAULT_XJERK 13.0
-  #define DEFAULT_YJERK 17.0
+  #define DEFAULT_YJERK 13.0
   #define DEFAULT_ZJERK  0.5
 
   //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves
 
   #define LIMITED_JERK_EDITING        // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
   #if ENABLED(LIMITED_JERK_EDITING)
-    #define MAX_JERK_EDIT_VALUES { 30, 30, 2, 20 } // ...or, set your own edit limits
+    #define MAX_JERK_EDIT_VALUES { 20, 20, 2, 20 } // ...or, set your own edit limits
   #endif
 #endif
 
@@ -1152,14 +1152,14 @@
 
 // The size of the print bed
 #define X_BED_SIZE 250
-#define Y_BED_SIZE 207
+#define Y_BED_SIZE 206
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
-#define Y_MIN_POS 0
+#define Y_MIN_POS -4
 #define Z_MIN_POS 0
-#define X_MAX_POS X_BED_SIZE
+#define X_MAX_POS X_BED_SIZE + X_MIN_POS
-#define Y_MAX_POS Y_BED_SIZE
+#define Y_MAX_POS Y_BED_SIZE + Y_MIN_POS
 #define Z_MAX_POS 210
 
 /**

Marlin/Configuration_adv.h

@@ -2232,7 +2232,7 @@
   #if AXIS_IS_TMC(X)
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
-    #define X_MICROSTEPS     16    // 0..256
+    #define X_MICROSTEPS     32    // 0..256
     #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1    // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ...
   #endif
@@ -2248,7 +2248,7 @@
   #if AXIS_IS_TMC(Y)
     #define Y_CURRENT       800
     #define Y_CURRENT_HOME  Y_CURRENT
-    #define Y_MICROSTEPS     16
+    #define Y_MICROSTEPS     32
     #define Y_RSENSE          0.11
     #define Y_CHAIN_POS      -1
   #endif
@@ -2264,7 +2264,7 @@
   #if AXIS_IS_TMC(Z)
     #define Z_CURRENT       800
     #define Z_CURRENT_HOME  Z_CURRENT
-    #define Z_MICROSTEPS     16
+    #define Z_MICROSTEPS     32
     #define Z_RSENSE          0.11
     #define Z_CHAIN_POS      -1
   #endif
@@ -2295,7 +2295,7 @@
 
   #if AXIS_IS_TMC(E0)
     #define E0_CURRENT      800
-    #define E0_MICROSTEPS    16
+    #define E0_MICROSTEPS    32
     #define E0_RSENSE         0.11
     #define E0_CHAIN_POS     -1
   #endif