andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Fix layout descr. in configuration_store.cpp

pull/1/head
Scott Lahteine 9 years ago
parent
d4e7c2d694
commit
f00ca3fd89
1 changed files with 79 additions and 70 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 149
      Marlin/configuration_store.cpp

149
Marlin/configuration_store.cpp
View File

@ -17,76 +17,79 @@
#define EEPROM_VERSION "V21" #define EEPROM_VERSION "V21"
/** /**
* V19 EEPROM Layout: * V21 EEPROM Layout:
* *
* ver * 100 Version (char x4)
* M92 XYZE axis_steps_per_unit (x4) *
* M203 XYZE max_feedrate (x4) * 104 M92 XYZE axis_steps_per_unit (float x4)
* M201 XYZE max_acceleration_units_per_sq_second (x4) * 120 M203 XYZE max_feedrate (float x4)
* M204 P acceleration * 136 M201 XYZE max_acceleration_units_per_sq_second (uint32_t x4)
* M204 R retract_acceleration * 152 M204 P acceleration (float)
* M204 T travel_acceleration * 156 M204 R retract_acceleration (float)
* M205 S minimumfeedrate * 160 M204 T travel_acceleration (float)
* M205 T mintravelfeedrate * 164 M205 S minimumfeedrate (float)
* M205 B minsegmenttime * 168 M205 T mintravelfeedrate (float)
* M205 X max_xy_jerk * 172 M205 B minsegmenttime (ulong)
* M205 Z max_z_jerk * 176 M205 X max_xy_jerk (float)
* M205 E max_e_jerk * 180 M205 Z max_z_jerk (float)
* M206 XYZ home_offset (x3) * 184 M205 E max_e_jerk (float)
* 188 M206 XYZ home_offset (float x3)
* *
* Mesh bed leveling: * Mesh bed leveling:
* M420 S active * 200 M420 S active (bool)
* mesh_num_x (set in firmware) * 201 mesh_num_x (uint8 as set in firmware)
* mesh_num_y (set in firmware) * 202 mesh_num_y (uint8 as set in firmware)
* M421 XYZ z_values[][] * 203 M421 XYZ z_values[][] (float x9, by default)
* M851 zprobe_zoffset * 239 M851 zprobe_zoffset (float)
* *
* DELTA: * DELTA:
* M666 XYZ endstop_adj (x3) * 243 M666 XYZ endstop_adj (float x3)
* M665 R delta_radius * 255 M665 R delta_radius (float)
* M665 L delta_diagonal_rod * 259 M665 L delta_diagonal_rod (float)
* M665 S delta_segments_per_second * 263 M665 S delta_segments_per_second (float)
*
* Z_DUAL_ENDSTOPS:
* 267 M666 Z z_endstop_adj (float)
* *
* ULTIPANEL: * ULTIPANEL:
* M145 S0 H plaPreheatHotendTemp * 271 M145 S0 H plaPreheatHotendTemp (int)
* M145 S0 B plaPreheatHPBTemp * 273 M145 S0 B plaPreheatHPBTemp (int)
* M145 S0 F plaPreheatFanSpeed * 275 M145 S0 F plaPreheatFanSpeed (int)
* M145 S1 H absPreheatHotendTemp * 277 M145 S1 H absPreheatHotendTemp (int)
* M145 S1 B absPreheatHPBTemp * 279 M145 S1 B absPreheatHPBTemp (int)
* M145 S1 F absPreheatFanSpeed * 281 M145 S1 F absPreheatFanSpeed (int)
* *
* PIDTEMP: * PIDTEMP:
* M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] * 283 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4)
* M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] * 299 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4)
* M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] * 315 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4)
* M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] * 331 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4)
* M301 L lpq_len * 347 M301 L lpq_len (int)
* *
* PIDTEMPBED: * PIDTEMPBED:
* M304 PID bedKp, bedKi, bedKd * 349 M304 PID bedKp, bedKi, bedKd (float x3)
* *
* DOGLCD: * DOGLCD:
* M250 C lcd_contrast * 361 M250 C lcd_contrast (int)
* *
* SCARA: * SCARA:
* M365 XYZ axis_scaling (x3) * 363 M365 XYZ axis_scaling (float x3)
* *
* FWRETRACT: * FWRETRACT:
* M209 S autoretract_enabled * 375 M209 S autoretract_enabled (bool)
* M207 S retract_length * 376 M207 S retract_length (float)
* M207 W retract_length_swap * 380 M207 W retract_length_swap (float)
* M207 F retract_feedrate * 384 M207 F retract_feedrate (float)
* M207 Z retract_zlift * 388 M207 Z retract_zlift (float)
* M208 S retract_recover_length * 392 M208 S retract_recover_length (float)
* M208 W retract_recover_length_swap * 396 M208 W retract_recover_length_swap (float)
* M208 F retract_recover_feedrate * 400 M208 F retract_recover_feedrate (float)
* *
* M200 D volumetric_enabled (D>0 makes this enabled) * Volumetric Extrusion:
* 404 M200 D volumetric_enabled (bool)
* 405 M200 T D filament_size (float x4) (T0..3)
* *
* M200 T D filament_size (x4) (T0..3) * 421 This Slot is Available!
*
* Z_DUAL_ENDSTOPS:
* M666 Z z_endstop_adj
* *
*/ */
#include "Marlin.h" #include "Marlin.h"
@ -133,6 +136,10 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) {
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
/**
* Store Configuration Settings - M500
*/
void Config_StoreSettings() { void Config_StoreSettings() {
float dummy = 0.0f; float dummy = 0.0f;
char ver[4] = "000"; char ver[4] = "000";
@ -185,10 +192,10 @@ void Config_StoreSettings() {
#elif ENABLED(Z_DUAL_ENDSTOPS) #elif ENABLED(Z_DUAL_ENDSTOPS)
EEPROM_WRITE_VAR(i, z_endstop_adj); // 1 floats EEPROM_WRITE_VAR(i, z_endstop_adj); // 1 floats
dummy = 0.0f; dummy = 0.0f;
for (int q = 5; q--;) EEPROM_WRITE_VAR(i, dummy); for (uint8_t q = 5; q--;) EEPROM_WRITE_VAR(i, dummy);
#else #else
dummy = 0.0f; dummy = 0.0f;
for (int q = 6; q--;) EEPROM_WRITE_VAR(i, dummy); for (uint8_t q = 6; q--;) EEPROM_WRITE_VAR(i, dummy);
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
@ -203,7 +210,7 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, absPreheatHPBTemp); EEPROM_WRITE_VAR(i, absPreheatHPBTemp);
EEPROM_WRITE_VAR(i, absPreheatFanSpeed); EEPROM_WRITE_VAR(i, absPreheatFanSpeed);
for (int e = 0; e < 4; e++) { for (uint8_t e = 0; e < 4; e++) {
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
if (e < EXTRUDERS) { if (e < EXTRUDERS) {
@ -223,7 +230,7 @@ void Config_StoreSettings() {
dummy = DUMMY_PID_VALUE; // When read, will not change the existing value dummy = DUMMY_PID_VALUE; // When read, will not change the existing value
EEPROM_WRITE_VAR(i, dummy); EEPROM_WRITE_VAR(i, dummy);
dummy = 0.0f; dummy = 0.0f;
for (int q = 3; q--;) EEPROM_WRITE_VAR(i, dummy); for (uint8_t q = 3; q--;) EEPROM_WRITE_VAR(i, dummy);
} }
} // Extruders Loop } // Extruders Loop
@ -277,7 +284,7 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, volumetric_enabled); EEPROM_WRITE_VAR(i, volumetric_enabled);
// Save filament sizes // Save filament sizes
for (int q = 0; q < 4; q++) { for (uint8_t q = 0; q < 4; q++) {
if (q < EXTRUDERS) dummy = filament_size[q]; if (q < EXTRUDERS) dummy = filament_size[q];
EEPROM_WRITE_VAR(i, dummy); EEPROM_WRITE_VAR(i, dummy);
} }
@ -339,10 +346,10 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, mbl.z_values); EEPROM_READ_VAR(i, mbl.z_values);
} else { } else {
mbl.reset(); mbl.reset();
for (int q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy); for (uint8_t q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy);
} }
#else #else
for (int q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy); for (uint8_t q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy);
#endif // MESH_BED_LEVELING #endif // MESH_BED_LEVELING
#if DISABLED(AUTO_BED_LEVELING_FEATURE) #if DISABLED(AUTO_BED_LEVELING_FEATURE)
@ -358,10 +365,10 @@ void Config_RetrieveSettings() {
#elif ENABLED(Z_DUAL_ENDSTOPS) #elif ENABLED(Z_DUAL_ENDSTOPS)
EEPROM_READ_VAR(i, z_endstop_adj); EEPROM_READ_VAR(i, z_endstop_adj);
dummy = 0.0f; dummy = 0.0f;
for (int q=5; q--;) EEPROM_READ_VAR(i, dummy); for (uint8_t q=5; q--;) EEPROM_READ_VAR(i, dummy);
#else #else
dummy = 0.0f; dummy = 0.0f;
for (int q=6; q--;) EEPROM_READ_VAR(i, dummy); for (uint8_t q=6; q--;) EEPROM_READ_VAR(i, dummy);
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
@ -377,7 +384,7 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, absPreheatFanSpeed); EEPROM_READ_VAR(i, absPreheatFanSpeed);
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
for (int e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin for (uint8_t e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin
EEPROM_READ_VAR(i, dummy); // Kp EEPROM_READ_VAR(i, dummy); // Kp
if (e < EXTRUDERS && dummy != DUMMY_PID_VALUE) { if (e < EXTRUDERS && dummy != DUMMY_PID_VALUE) {
// do not need to scale PID values as the values in EEPROM are already scaled // do not need to scale PID values as the values in EEPROM are already scaled
@ -391,12 +398,12 @@ void Config_RetrieveSettings() {
#endif #endif
} }
else { else {
for (int q=3; q--;) EEPROM_READ_VAR(i, dummy); // Ki, Kd, Kc for (uint8_t q=3; q--;) EEPROM_READ_VAR(i, dummy); // Ki, Kd, Kc
} }
} }
#else // !PIDTEMP #else // !PIDTEMP
// 4 x 4 = 16 slots for PID parameters // 4 x 4 = 16 slots for PID parameters
for (int q=16; q--;) EEPROM_READ_VAR(i, dummy); // 4x Kp, Ki, Kd, Kc for (uint8_t q=16; q--;) EEPROM_READ_VAR(i, dummy); // 4x Kp, Ki, Kd, Kc
#endif // !PIDTEMP #endif // !PIDTEMP
#if DISABLED(PID_ADD_EXTRUSION_RATE) #if DISABLED(PID_ADD_EXTRUSION_RATE)
@ -415,7 +422,7 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, bedKd); EEPROM_READ_VAR(i, bedKd);
} }
else { else {
for (int q=2; q--;) EEPROM_READ_VAR(i, dummy); // bedKi, bedKd for (uint8_t q=2; q--;) EEPROM_READ_VAR(i, dummy); // bedKi, bedKd
} }
#if DISABLED(HAS_LCD_CONTRAST) #if DISABLED(HAS_LCD_CONTRAST)
@ -450,7 +457,7 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, volumetric_enabled); EEPROM_READ_VAR(i, volumetric_enabled);
for (int q = 0; q < 4; q++) { for (uint8_t q = 0; q < 4; q++) {
EEPROM_READ_VAR(i, dummy); EEPROM_READ_VAR(i, dummy);
if (q < EXTRUDERS) filament_size[q] = dummy; if (q < EXTRUDERS) filament_size[q] = dummy;
} }
@ -538,7 +545,7 @@ void Config_ResetDefault() {
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
#if ENABLED(PID_PARAMS_PER_EXTRUDER) #if ENABLED(PID_PARAMS_PER_EXTRUDER)
for (int e = 0; e < EXTRUDERS; e++) for (uint8_t e = 0; e < EXTRUDERS; e++)
#else #else
int e = 0; UNUSED(e); // only need to write once int e = 0; UNUSED(e); // only need to write once
#endif #endif
@ -686,8 +693,8 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" X", (unsigned long)MESH_NUM_X_POINTS); SERIAL_ECHOPAIR(" X", (unsigned long)MESH_NUM_X_POINTS);
SERIAL_ECHOPAIR(" Y", (unsigned long)MESH_NUM_Y_POINTS); SERIAL_ECHOPAIR(" Y", (unsigned long)MESH_NUM_Y_POINTS);
SERIAL_EOL; SERIAL_EOL;
for (int y = 0; y < MESH_NUM_Y_POINTS; y++) { for (uint8_t y = 0; y < MESH_NUM_Y_POINTS; y++) {
for (int x = 0; x < MESH_NUM_X_POINTS; x++) { for (uint8_t x = 0; x < MESH_NUM_X_POINTS; x++) {
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M421 X", mbl.get_x(x)); SERIAL_ECHOPAIR(" M421 X", mbl.get_x(x));
SERIAL_ECHOPAIR(" Y", mbl.get_y(y)); SERIAL_ECHOPAIR(" Y", mbl.get_y(y));
@ -708,8 +715,10 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS]); SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS]);
SERIAL_EOL; SERIAL_EOL;
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second"); if (!forReplay) {
CONFIG_ECHO_START; SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second");
CONFIG_ECHO_START;
}
SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod); SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod);
SERIAL_ECHOPAIR(" R", delta_radius); SERIAL_ECHOPAIR(" R", delta_radius);
SERIAL_ECHOPAIR(" S", delta_segments_per_second); SERIAL_ECHOPAIR(" S", delta_segments_per_second);

Write Preview
Loading…
Cancel
Save