andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Followup to new endstop interrupts feature 

- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
pull/1/head
Scott Lahteine 8 years ago
parent
832fe284b4
commit
eb120e518c
25 changed files with 215 additions and 217 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 4
      Marlin/Configuration.h
  2. 3
      Marlin/Marlin_main.cpp
  3. 321
      Marlin/endstop_interrupts.h
  4. 4
      Marlin/example_configurations/Cartesio/Configuration.h
  5. 4
      Marlin/example_configurations/Felix/Configuration.h
  6. 4
      Marlin/example_configurations/Felix/DUAL/Configuration.h
  7. 4
      Marlin/example_configurations/Hephestos/Configuration.h
  8. 4
      Marlin/example_configurations/Hephestos_2/Configuration.h
  9. 4
      Marlin/example_configurations/K8200/Configuration.h
  10. 4
      Marlin/example_configurations/K8400/Configuration.h
  11. 4
      Marlin/example_configurations/K8400/Dual-head/Configuration.h
  12. 4
      Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
  13. 4
      Marlin/example_configurations/RigidBot/Configuration.h
  14. 4
      Marlin/example_configurations/SCARA/Configuration.h
  15. 4
      Marlin/example_configurations/TAZ4/Configuration.h
  16. 4
      Marlin/example_configurations/WITBOX/Configuration.h
  17. 4
      Marlin/example_configurations/adafruit/ST7565/Configuration.h
  18. 4
      Marlin/example_configurations/delta/biv2.5/Configuration.h
  19. 4
      Marlin/example_configurations/delta/generic/Configuration.h
  20. 4
      Marlin/example_configurations/delta/kossel_mini/Configuration.h
  21. 4
      Marlin/example_configurations/delta/kossel_pro/Configuration.h
  22. 4
      Marlin/example_configurations/delta/kossel_xl/Configuration.h
  23. 4
      Marlin/example_configurations/makibox/Configuration.h
  24. 4
      Marlin/example_configurations/tvrrug/Round2/Configuration.h
  25. 20
      Marlin/stepper.cpp

4
Marlin/Configuration.h
View File

@ -445,8 +445,8 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

3
Marlin/Marlin_main.cpp
View File

@ -92,6 +92,7 @@
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
#include "endstop_interrupts.h"
#endif
/**
* Look here for descriptions of G-codes:
* - http://linuxcnc.org/handbook/gcode/g-code.html
@ -10020,7 +10021,7 @@ void setup() {
#endif
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
setup_enstop_interrupts();
setup_endstop_interrupts();
#endif
}

321
Marlin/endstop_interrupts.h
View File

@ -21,191 +21,186 @@
*/
/**
* Endstop interrupts
* Without endstop interrups the stepper-ISR must always test all endstops when interested in their states (endstops.update()).
* Most time the test will result in finding out nothing has changed.
* With endstop interrupts endstops.update() is called only when we know that at least one endstop has changed its state.
* Endstop Interrupts
*
* This can work only if all __used__ endstop pins can provide ether an 'external interrupt' or a 'pin change interrupt'.
* You can find out about pins issuing interrupts by running 'pin_interrupt_test.ino' (Marlin\buildroot\share\pin_interrupt_test\pin_interrupt_test.ino)
* Without endstop interrupts the endstop pins must be polled continually in
* the stepper-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate either an
* 'external interrupt' or a 'pin change interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#ifndef _ENDSTOP_INTERRUPTS_H_
#define _ENDSTOP_INTERRUPTS_H_
/**
* Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
*
* These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
* So we extend them here because this are the normal pins for Y_MIN and Y_MAX on RAMPS.
* There are more PCI enabled processor pins on Port J, but they are not connected to Arduino MEGA.
*/
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
#undef digitalPinToPCICR
#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 15)) || \
(((p) >= 50) && ((p) <= 53)) || \
(((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) )
#undef digitalPinToPCICRbit
#define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \
( (((p) >= 14) && ((p) <= 15)) ? 1 : \
( (((p) >= 62) && ((p) <= 69)) ? 2 : \
0 ) ) )
#undef digitalPinToPCMSK
#define digitalPinToPCMSK(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \
( (((p) >= 14) && ((p) <= 15)) ? (&PCMSK1) : \
( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \
((uint8_t *)0) ) ) )
#undef digitalPinToPCMSKbit
#define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \
( ((p) == 14) ? 2 : \
( ((p) == 15) ? 1 : \
( ((p) == 50) ? 3 : \
( ((p) == 51) ? 2 : \
( ((p) == 52) ? 1 : \
( ((p) == 53) ? 0 : \
( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \
0 ) ) ) ) ) ) ) )
#endif
volatile uint8_t e_hit = 0; // Different from 0 when the endstops shall be tested in detail.
// Must be reset to 0 by the test function when the tests are finished.
// Install Pin change interrupt for a pin, can be called multiple times
void pciSetup(byte pin) {
*digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin)); // enable pin
PCIFR |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
PCICR |= bit (digitalPinToPCICRbit(pin)); // enable interrupt for the group
}
// This is what is really done inside the interrupts.
FORCE_INLINE void endstop_ISR_worker( void ) {
e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
}
// Use one Routine to handle each group
// One ISR for all EXT-Interrupts
void endstop_ISR(void) {
endstop_ISR_worker();
}
#ifdef PCINT0_vect
ISR(PCINT0_vect) { // handle pin change interrupt
endstop_ISR_worker();
}
#endif
#ifdef PCINT1_vect
ISR(PCINT1_vect) { // handle pin change interrupt
endstop_ISR_worker();
}
#endif
#define _ENDSTOP_INTERRUPTS_H_
#ifdef PCINT2_vect
ISR(PCINT2_vect) { // handle pin change interrupt
endstop_ISR_worker();
}
#endif
#ifdef PCINT3_vect
ISR(PCINT3_vect) { // handle pin change interrupt
endstop_ISR_worker();
}
#endif
void setup_enstop_interrupts( void ) {
#if HAS_X_MAX
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR"); // if pin has no pin change interrupt - error
pciSetup(X_MAX_PIN); // assign it
#endif
/**
* Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
*
* These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
* So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
* There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
*/
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
#undef digitalPinToPCICR
#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 15)) || \
(((p) >= 50) && ((p) <= 53)) || \
(((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) )
#undef digitalPinToPCICRbit
#define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \
( (((p) >= 14) && ((p) <= 15)) ? 1 : \
( (((p) >= 62) && ((p) <= 69)) ? 2 : \
0 ) ) )
#undef digitalPinToPCMSK
#define digitalPinToPCMSK(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \
( (((p) >= 14) && ((p) <= 15)) ? (&PCMSK1) : \
( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \
((uint8_t *)0) ) ) )
#undef digitalPinToPCMSKbit
#define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \
( ((p) == 14) ? 2 : \
( ((p) == 15) ? 1 : \
( ((p) == 50) ? 3 : \
( ((p) == 51) ? 2 : \
( ((p) == 52) ? 1 : \
( ((p) == 53) ? 0 : \
( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \
0 ) ) ) ) ) ) ) )
#endif
volatile uint8_t e_hit = 0; // Different from 0 when the endstops shall be tested in detail.
// Must be reset to 0 by the test function when the tests are finished.
// Install Pin change interrupt for a pin. Can be called multiple times.
void pciSetup(byte pin) {
*digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin)); // enable pin
PCIFR |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
PCICR |= bit (digitalPinToPCICRbit(pin)); // enable interrupt for the group
}
// This is what is really done inside the interrupts.
FORCE_INLINE void endstop_ISR_worker( void ) {
e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
}
// Use one Routine to handle each group
// One ISR for all EXT-Interrupts
void endstop_ISR(void) { endstop_ISR_worker(); }
// Handlers for pin change interrupts
#ifdef PCINT0_vect
ISR(PCINT0_vect) { endstop_ISR_worker(); }
#endif
#ifdef PCINT1_vect
ISR(PCINT1_vect) { endstop_ISR_worker(); }
#endif
#ifdef PCINT2_vect
ISR(PCINT2_vect) { endstop_ISR_worker(); }
#endif
#ifdef PCINT3_vect
ISR(PCINT3_vect) { endstop_ISR_worker(); }
#endif
void setup_endstop_interrupts( void ) {
#if HAS_X_MAX
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR"); // if pin has no pin change interrupt - error
pciSetup(X_MAX_PIN); // assign it
#endif
#endif
#if HAS_X_MIN
#if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(X_MIN_PIN);
#endif
#if HAS_X_MIN
#if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(X_MIN_PIN);
#endif
#endif
#if HAS_Y_MAX
#if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Y_MAX_PIN);
#endif
#if HAS_Y_MAX
#if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Y_MAX_PIN);
#endif
#endif
#if HAS_Y_MIN
#if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Y_MIN_PIN);
#endif
#if HAS_Y_MIN
#if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Y_MIN_PIN);
#endif
#endif
#if HAS_Z_MAX
#if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z_MAX_PIN);
#endif
#if HAS_Z_MAX
#if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z_MAX_PIN);
#endif
#endif
#if HAS_Z_MIN
#if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z_MIN_PIN);
#endif
#if HAS_Z_MIN
#if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z_MIN_PIN);
#endif
#endif
#if HAS_Z2_MAX
#if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z2_MAX_PIN);
#endif
#if HAS_Z2_MAX
#if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z2_MAX_PIN);
#endif
#endif
#if HAS_Z2_MIN
#if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z2_MIN_PIN);
#endif
#if HAS_Z2_MIN
#if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z2_MIN_PIN);
#endif
#endif
#if HAS_Z_MIN_PROBE_PIN
#if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z_MIN_PROBE_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
#if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
pciSetup(Z_MIN_PROBE_PIN);
#endif
#endif
// When we arive here without error each pin has ether a EXT-interrupt or a PCI.
}
// If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
}
#endif //_ENDSTOP_INTERRUPTS_H_

4
Marlin/example_configurations/Cartesio/Configuration.h
View File

@ -445,8 +445,8 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/Felix/Configuration.h
View File

@ -427,8 +427,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/Felix/DUAL/Configuration.h
View File

@ -427,8 +427,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/Hephestos/Configuration.h
View File

@ -437,8 +437,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/Hephestos_2/Configuration.h
View File

@ -439,8 +439,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/K8200/Configuration.h
View File

@ -462,8 +462,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/K8400/Configuration.h
View File

@ -445,8 +445,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/K8400/Dual-head/Configuration.h
View File

@ -445,8 +445,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View File

@ -445,8 +445,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/RigidBot/Configuration.h
View File

@ -442,8 +442,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -460,8 +460,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/TAZ4/Configuration.h
View File

@ -466,8 +466,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/WITBOX/Configuration.h
View File

@ -437,8 +437,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View File

@ -445,8 +445,8 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/delta/biv2.5/Configuration.h
View File

@ -489,8 +489,8 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -489,8 +489,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -489,8 +489,8 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -478,8 +478,8 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View File

@ -487,8 +487,8 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/makibox/Configuration.h
View File

@ -448,8 +448,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

4
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View File

@ -435,8 +435,8 @@
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE
//=============================================================================

20
Marlin/stepper.cpp
View File

@ -378,19 +378,21 @@ void Stepper::isr() {
}
// Update endstops state, if enabled
if (endstops.enabled
if ((endstops.enabled
#if HAS_BED_PROBE
|| endstops.z_probe_enabled
#endif
)
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
if(e_hit) {
#endif
endstops.update();
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
)
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
&& e_hit
#endif
) {
endstops.update();
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
e_hit--;
}
#endif
#endif
}
// Take multiple steps per interrupt (For high speed moves)
bool all_steps_done = false;

Write Preview
Loading…
Cancel
Save