Revert menu_item_if ahead of refactor

Marlin/src/lcd/menu/menu.h

@@ -340,8 +340,8 @@ class MenuItem_bool : public MenuEditItemBase {
  * menu item that exists in two screen segments is drawn and processed twice per screen
  * update. With each item processed 5, 10, 20, or 40 times the logic has to be simple.
  *
- * To keep performance optimal, use the MENU_ITEM_IF/ELSE/ELIF macros. If function calls
- * are needed to test conditions, they should come before START_MENU / START_SCREEN.
+ * To avoid repetition and side-effects, function calls for testing menu item conditions
+ * should be done before the menu loop (START_MENU / START_SCREEN).
  */
 
 /**
@@ -536,17 +536,6 @@ class MenuItem_bool : public MenuEditItemBase {
 #define YESNO_ITEM_N_P(N,PLABEL, V...)      _CONFIRM_ITEM_N_P(N, PLABEL, ##V)
 #define YESNO_ITEM_N(N,LABEL, V...)            YESNO_ITEM_N_P(N, GET_TEXT(LABEL), ##V)
 
-/**
- * MENU_ITEM_IF/ELSE/ELIF
- *
- * Apply a condition for a menu item to exist.
- * When the condition passes, NEXT_ITEM updates _thisItemNr.
- * This cannot be used to wrap multiple menu items.
- */
-#define MENU_ITEM_IF(COND)        if ((_menuLineNr == _thisItemNr) && (COND))
-#define MENU_ITEM_ELIF(COND) else if ((_menuLineNr == _thisItemNr) && (COND))
-#define MENU_ITEM_ELSE       else if  (_menuLineNr == _thisItemNr)
-
 ////////////////////////////////////////////
 /////////////// Menu Screens ///////////////
 ////////////////////////////////////////////

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -147,12 +147,10 @@ void menu_cancelobject();
     #endif
 
     #if ENABLED(FILAMENT_RUNOUT_SENSOR) && FILAMENT_RUNOUT_DISTANCE_MM
-      MENU_ITEM_IF(1) {
-        editable.decimal = runout.runout_distance();
-        EDIT_ITEM(float3, MSG_RUNOUT_DISTANCE_MM, &editable.decimal, 1, 30,
-          []{ runout.set_runout_distance(editable.decimal); }, true
-        );
-      }
+      editable.decimal = runout.runout_distance();
+      EDIT_ITEM(float3, MSG_RUNOUT_DISTANCE_MM, &editable.decimal, 1, 30,
+        []{ runout.set_runout_distance(editable.decimal); }, true
+      );
     #endif
 
     END_MENU();
@@ -417,10 +415,8 @@ void menu_cancelobject();
 
     #ifdef XY_FREQUENCY_LIMIT
       EDIT_ITEM(int8, MSG_XY_FREQUENCY_LIMIT, &planner.xy_freq_limit_hz, 0, 100, planner.refresh_frequency_limit, true);
-      MENU_ITEM_IF(1) {
-        editable.uint8 = uint8_t(LROUND(planner.xy_freq_min_speed_factor * 255 * 100)); // percent to u8
-        EDIT_ITEM(percent, MSG_XY_FREQUENCY_FEEDRATE, &editable.uint8, 3, 255, []{ planner.set_min_speed_factor_u8(editable.uint8); }, true);
-      }
+      editable.uint8 = uint8_t(LROUND(planner.xy_freq_min_speed_factor * 255 * 100)); // percent to u8
+      EDIT_ITEM(percent, MSG_XY_FREQUENCY_FEEDRATE, &editable.uint8, 3, 255, []{ planner.set_min_speed_factor_u8(editable.uint8); }, true);
     #endif
 
     END_MENU();
@@ -504,6 +500,10 @@ void menu_advanced_steps_per_mm() {
 void menu_advanced_settings() {
   const bool is_busy = printer_busy();
 
+  #if ENABLED(SD_FIRMWARE_UPDATE)
+    bool sd_update_state = settings.sd_update_status();
+  #endif
+
   START_MENU();
   BACK_ITEM(MSG_CONFIGURATION);
 
@@ -576,19 +576,16 @@ void menu_advanced_settings() {
   #endif
 
   #if ENABLED(SD_FIRMWARE_UPDATE)
-    MENU_ITEM_IF (1) {
-      bool sd_update_state = settings.sd_update_status();
-      EDIT_ITEM(bool, MSG_MEDIA_UPDATE, &sd_update_state, []{
-        //
-        // Toggle the SD Firmware Update state in EEPROM
-        //
-        const bool new_state = !settings.sd_update_status(),
-                   didset = settings.set_sd_update_status(new_state);
-        ui.completion_feedback(didset);
-        ui.return_to_status();
-        if (new_state) LCD_MESSAGEPGM(MSG_RESET_PRINTER); else ui.reset_status();
-      });
-    }
+    EDIT_ITEM(bool, MSG_MEDIA_UPDATE, &sd_update_state, []{
+      //
+      // Toggle the SD Firmware Update state in EEPROM
+      //
+      const bool new_state = !settings.sd_update_status(),
+                 didset = settings.set_sd_update_status(new_state);
+      ui.completion_feedback(didset);
+      ui.return_to_status();
+      if (new_state) LCD_MESSAGEPGM(MSG_RESET_PRINTER); else ui.reset_status();
+    });
   #endif
 
   #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)

Marlin/src/lcd/menu/menu_bed_leveling.cpp

@@ -256,11 +256,9 @@ void menu_bed_leveling() {
 
   // Z Fade Height
   #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-    MENU_ITEM_IF (1) {
-      // Shadow for editing the fade height
-      editable.decimal = planner.z_fade_height;
-      EDIT_ITEM_FAST(float3, MSG_Z_FADE_HEIGHT, &editable.decimal, 0, 100, []{ set_z_fade_height(editable.decimal); });
-    }
+    // Shadow for editing the fade height
+    editable.decimal = planner.z_fade_height;
+    EDIT_ITEM_FAST(float3, MSG_Z_FADE_HEIGHT, &editable.decimal, 0, 100, []{ set_z_fade_height(editable.decimal); });
   #endif
 
   //

Marlin/src/lcd/menu/menu_cancelobject.cpp

@@ -62,7 +62,7 @@ void menu_cancelobject() {
   for (int8_t i = -1; i < cancelable.object_count; i++) {
     if (i == ao) continue;                                          // Active is drawn on -1 index
     const int8_t j = i < 0 ? ao : i;                                // Active or index item
-    MENU_ITEM_IF (!cancelable.is_canceled(j)) {                     // Not canceled already?
+    if (!cancelable.is_canceled(j)) {                               // Not canceled already?
       SUBMENU_N(j, MSG_CANCEL_OBJECT_N, lcd_cancel_object_confirm); // Offer the option.
       if (i < 0) SKIP_ITEM();                                       // Extra line after active
     }

Marlin/src/lcd/menu/menu_filament.cpp

@@ -116,16 +116,16 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
     // Change filament
     #if E_STEPPERS == 1
       PGM_P const msg = GET_TEXT(MSG_FILAMENTCHANGE);
-      MENU_ITEM_IF (thermalManager.targetTooColdToExtrude(active_extruder))
+      if (thermalManager.targetTooColdToExtrude(active_extruder))
         SUBMENU_P(msg, []{ _menu_temp_filament_op(PAUSE_MODE_CHANGE_FILAMENT, 0); });
-      MENU_ITEM_ELSE
+      else
         GCODES_ITEM_P(msg, PSTR("M600 B0"));
     #else
       PGM_P const msg = GET_TEXT(MSG_FILAMENTCHANGE_E);
       LOOP_L_N(s, E_STEPPERS) {
-        MENU_ITEM_IF (thermalManager.targetTooColdToExtrude(s))
+        if (thermalManager.targetTooColdToExtrude(s))
           SUBMENU_N_P(s, msg, []{ _menu_temp_filament_op(PAUSE_MODE_CHANGE_FILAMENT, MenuItemBase::itemIndex); });
-        MENU_ITEM_ELSE {
+        else {
           ACTION_ITEM_N_P(s, msg, []{
             char cmd[13];
             sprintf_P(cmd, PSTR("M600 B0 T%i"), int(MenuItemBase::itemIndex));
@@ -140,16 +140,16 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
         // Load filament
         #if E_STEPPERS == 1
           PGM_P const msg_load = GET_TEXT(MSG_FILAMENTLOAD);
-          MENU_ITEM_IF (thermalManager.targetTooColdToExtrude(active_extruder))
+          if (thermalManager.targetTooColdToExtrude(active_extruder))
             SUBMENU_P(msg_load, []{ _menu_temp_filament_op(PAUSE_MODE_LOAD_FILAMENT, 0); });
-          MENU_ITEM_ELSE
+          else
             GCODES_ITEM_P(msg_load, PSTR("M701"));
         #else
           PGM_P const msg_load = GET_TEXT(MSG_FILAMENTLOAD_E);
           LOOP_L_N(s, E_STEPPERS) {
-            MENU_ITEM_IF (thermalManager.targetTooColdToExtrude(s))
+            if (thermalManager.targetTooColdToExtrude(s))
               SUBMENU_N_P(s, msg_load, []{ _menu_temp_filament_op(PAUSE_MODE_LOAD_FILAMENT, MenuItemBase::itemIndex); });
-            MENU_ITEM_ELSE {
+            else {
               ACTION_ITEM_N_P(s, msg_load, []{
                 char cmd[12];
                 sprintf_P(cmd, PSTR("M701 T%i"), int(MenuItemBase::itemIndex));
@@ -162,22 +162,22 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
         // Unload filament
         #if E_STEPPERS == 1
           PGM_P const msg_unload = GET_TEXT(MSG_FILAMENTUNLOAD);
-          MENU_ITEM_IF (thermalManager.targetTooColdToExtrude(active_extruder))
+          if (thermalManager.targetTooColdToExtrude(active_extruder))
             SUBMENU_P(msg_unload, []{ _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, 0); });
-          MENU_ITEM_ELSE
+          else
             GCODES_ITEM_P(msg_unload, PSTR("M702"));
         #else
           #if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
-            MENU_ITEM_IF (too_cold)
+            if (too_cold)
               SUBMENU(MSG_FILAMENTUNLOAD_ALL, []{ _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, -1); });
-            MENU_ITEM_ELSE
+            else
               GCODES_ITEM(MSG_FILAMENTUNLOAD_ALL, PSTR("M702"));
           #endif
           PGM_P const msg_unload = GET_TEXT(MSG_FILAMENTUNLOAD_E);
           LOOP_L_N(s, E_STEPPERS) {
-            MENU_ITEM_IF (thermalManager.targetTooColdToExtrude(s))
+            if (thermalManager.targetTooColdToExtrude(s))
               SUBMENU_N_P(s, msg_unload, []{ _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, MenuItemBase::itemIndex); });
-            MENU_ITEM_ELSE {
+            else {
               ACTION_ITEM_N_P(s, msg_unload, []{
                 char cmd[12];
                 sprintf_P(cmd, PSTR("M702 T%i"), int(MenuItemBase::itemIndex));
@@ -230,13 +230,13 @@ void menu_pause_option() {
 
   #if HAS_FILAMENT_SENSOR
     const bool still_out = runout.filament_ran_out;
-    MENU_ITEM_IF (still_out)
+    if (still_out)
       EDIT_ITEM(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset);
   #else
     constexpr bool still_out = false;
   #endif
 
-  MENU_ITEM_IF (!still_out)
+  if (!still_out)
     ACTION_ITEM(MSG_FILAMENT_CHANGE_OPTION_RESUME, []{ pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT; });
 
   END_MENU();

Marlin/src/lcd/menu/menu_led.cpp

@@ -70,10 +70,8 @@ void menu_led_custom() {
 void menu_led() {
   START_MENU();
   BACK_ITEM(MSG_MAIN);
-  MENU_ITEM_IF(1) {
-    bool led_on = leds.lights_on;
-    EDIT_ITEM(bool, MSG_LEDS, &led_on, leds.toggle);
-  }
+  bool led_on = leds.lights_on;
+  EDIT_ITEM(bool, MSG_LEDS, &led_on, leds.toggle);
   ACTION_ITEM(MSG_SET_LEDS_DEFAULT, leds.set_default);
   #if ENABLED(LED_COLOR_PRESETS)
     SUBMENU(MSG_LED_PRESETS, menu_led_presets);

Marlin/src/lcd/menu/menu_main.cpp

@@ -144,7 +144,7 @@ void menu_main() {
 
     #endif // !HAS_ENCODER_WHEEL && SDSUPPORT
 
-    MENU_ITEM_IF (TERN0(MACHINE_CAN_PAUSE, printingIsPaused()))
+    if (TERN0(MACHINE_CAN_PAUSE, printingIsPaused()))
       ACTION_ITEM(MSG_RESUME_PRINT, ui.resume_print);
 
     SUBMENU(MSG_MOTION, menu_motion);
@@ -176,9 +176,9 @@ void menu_main() {
 
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
     #if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
-      MENU_ITEM_IF (thermalManager.targetHotEnoughToExtrude(active_extruder))
+      if (thermalManager.targetHotEnoughToExtrude(active_extruder))
         GCODES_ITEM(MSG_FILAMENTCHANGE, PSTR("M600 B0"));
-      MENU_ITEM_ELSE
+      else
         SUBMENU(MSG_FILAMENTCHANGE, []{ _menu_temp_filament_op(PAUSE_MODE_CHANGE_FILAMENT, 0); });
     #else
       SUBMENU(MSG_FILAMENTCHANGE, menu_change_filament);
@@ -197,9 +197,9 @@ void menu_main() {
   // Switch power on/off
   //
   #if ENABLED(PSU_CONTROL)
-    MENU_ITEM_IF (powersupply_on)
+    if (powersupply_on)
       GCODES_ITEM(MSG_SWITCH_PS_OFF, PSTR("M81"));
-    MENU_ITEM_ELSE
+    else
       GCODES_ITEM(MSG_SWITCH_PS_ON, PSTR("M80"));
   #endif
 

Marlin/src/lcd/menu/menu_media.cpp

@@ -127,9 +127,9 @@ void menu_media() {
   if (ui.should_draw()) for (uint16_t i = 0; i < fileCnt; i++) {
     if (_menuLineNr == _thisItemNr) {
       card.getfilename_sorted(SD_ORDER(i, fileCnt));
-      MENU_ITEM_IF (card.flag.filenameIsDir)
+      if (card.flag.filenameIsDir)
         MENU_ITEM(sdfolder, MSG_MEDIA_MENU, card);
-      MENU_ITEM_ELSE
+      else
         MENU_ITEM(sdfile, MSG_MEDIA_MENU, card);
     }
     else

Marlin/src/lcd/menu/menu_motion.cpp

@@ -217,7 +217,7 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int
     SUBMENU(MSG_MOVE_10MM, []{ _goto_manual_move(10);    });
     SUBMENU(MSG_MOVE_1MM,  []{ _goto_manual_move( 1);    });
     SUBMENU(MSG_MOVE_01MM, []{ _goto_manual_move( 0.1f); });
-    MENU_ITEM_IF (axis == Z_AXIS && (SHORT_MANUAL_Z_MOVE) > 0.0f && (SHORT_MANUAL_Z_MOVE) < 0.1f) {
+    if (axis == Z_AXIS && (SHORT_MANUAL_Z_MOVE) > 0.0f && (SHORT_MANUAL_Z_MOVE) < 0.1f) {
       extern const char NUL_STR[];
       SUBMENU_P(NUL_STR, []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); });
       MENU_ITEM_ADDON_START(0 + ENABLED(HAS_CHARACTER_LCD));
@@ -271,23 +271,23 @@ void menu_move() {
       }
     #elif EXTRUDERS == 3
       if (active_extruder < 2) {
-        MENU_ITEM_IF (active_extruder)
+        if (active_extruder)
           GCODES_ITEM_N(0, MSG_SELECT_E, PSTR("T0"));
-        MENU_ITEM_ELSE
+        else
           GCODES_ITEM_N(1, MSG_SELECT_E, PSTR("T1"));
       }
     #else
-      MENU_ITEM_IF (active_extruder)
+      if (active_extruder)
         GCODES_ITEM_N(0, MSG_SELECT_E, PSTR("T0"));
-      MENU_ITEM_ELSE
+      else
         GCODES_ITEM_N(1, MSG_SELECT_E, PSTR("T1"));
     #endif
 
   #elif ENABLED(DUAL_X_CARRIAGE)
 
-    MENU_ITEM_IF (active_extruder)
+    if (active_extruder)
       GCODES_ITEM_N(0, MSG_SELECT_E, PSTR("T0"));
-    MENU_ITEM_ELSE
+    else
       GCODES_ITEM_N(1, MSG_SELECT_E, PSTR("T1"));
 
   #endif
@@ -335,7 +335,7 @@ void menu_motion() {
   //
   // Move Axis
   //
-  MENU_ITEM_IF (TERN1(DELTA, all_axes_homed()))
+  if (TERN1(DELTA, all_axes_homed()))
     SUBMENU(MSG_MOVE_AXIS, menu_move);
 
   //
@@ -364,7 +364,7 @@ void menu_motion() {
 
   #elif ENABLED(LCD_BED_LEVELING)
 
-    MENU_ITEM_IF (!g29_in_progress)
+    if (!g29_in_progress)
       SUBMENU(MSG_BED_LEVELING, menu_bed_leveling);
 
   #elif HAS_LEVELING && DISABLED(SLIM_LCD_MENUS)
@@ -373,16 +373,14 @@ void menu_motion() {
       GCODES_ITEM(MSG_LEVEL_BED, PSTR("G28\nG29"));
     #endif
 
-    MENU_ITEM_IF (all_axes_homed() && leveling_is_valid()) {
+    if (all_axes_homed() && leveling_is_valid()) {
       bool show_state = planner.leveling_active;
       EDIT_ITEM(bool, MSG_BED_LEVELING, &show_state, _lcd_toggle_bed_leveling);
     }
 
     #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-      MENU_ITEM_IF(1) {
-        editable.decimal = planner.z_fade_height;
-        EDIT_ITEM_FAST(float3, MSG_Z_FADE_HEIGHT, &editable.decimal, 0, 100, []{ set_z_fade_height(editable.decimal); });
-      }
+      editable.decimal = planner.z_fade_height;
+      EDIT_ITEM_FAST(float3, MSG_Z_FADE_HEIGHT, &editable.decimal, 0, 100, []{ set_z_fade_height(editable.decimal); });
     #endif
 
   #endif

Marlin/src/lcd/menu/menu_temperature.cpp

@@ -154,6 +154,11 @@ void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t i
 #endif // HAS_TEMP_HOTEND || HAS_HEATED_BED
 
 void menu_temperature() {
+  #if HAS_TEMP_HOTEND
+    bool has_heat = false;
+    HOTEND_LOOP() if (thermalManager.temp_hotend[HOTEND_INDEX].target) { has_heat = true; break; }
+  #endif
+
   START_MENU();
   BACK_ITEM(MSG_MAIN);
 
@@ -198,10 +203,8 @@ void menu_temperature() {
 
     #if HAS_FAN1 || HAS_FAN2 || HAS_FAN3 || HAS_FAN4 || HAS_FAN5 || HAS_FAN6 || HAS_FAN7
       auto fan_edit_items = [&](const uint8_t f) {
-        MENU_ITEM_IF(1) {
-          editable.uint8 = thermalManager.fan_speed[f];
-          EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update);
-        }
+        editable.uint8 = thermalManager.fan_speed[f];
+        EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update);
         #if ENABLED(EXTRA_FAN_SPEED)
           EDIT_ITEM_FAST_N(percent, f, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[f], 3, 255);
         #endif
@@ -211,18 +214,14 @@ void menu_temperature() {
     #define SNFAN(N) (ENABLED(SINGLENOZZLE_STANDBY_FAN) && !HAS_FAN##N && EXTRUDERS > N)
     #if SNFAN(1) || SNFAN(2) || SNFAN(3) || SNFAN(4) || SNFAN(5) || SNFAN(6) || SNFAN(7)
       auto singlenozzle_item = [&](const uint8_t f) {
-        MENU_ITEM_IF(1) {
-          editable.uint8 = singlenozzle_fan_speed[f];
-          EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update);
-        }
+        editable.uint8 = singlenozzle_fan_speed[f];
+        EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update);
       };
     #endif
 
     #if HAS_FAN0
-      MENU_ITEM_IF(1) {
-        editable.uint8 = thermalManager.fan_speed[0];
-        EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update);
-      }
+      editable.uint8 = thermalManager.fan_speed[0];
+      EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update);
       #if ENABLED(EXTRA_FAN_SPEED)
         EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255);
       #endif
@@ -281,12 +280,8 @@ void menu_temperature() {
     //
     // Cooldown
     //
-    MENU_ITEM_IF(1) {
-      bool has_heat = false;
-      HOTEND_LOOP() if (thermalManager.temp_hotend[HOTEND_INDEX].target) { has_heat = true; break; }
-      if (TERN0(HAS_HEATED_BED, thermalManager.temp_bed.target)) has_heat = true;
-      if (has_heat) ACTION_ITEM(MSG_COOLDOWN, lcd_cooldown);
-    }
+    if (TERN0(HAS_HEATED_BED, thermalManager.temp_bed.target)) has_heat = true;
+    if (has_heat) ACTION_ITEM(MSG_COOLDOWN, lcd_cooldown);
 
   #endif // HAS_TEMP_HOTEND
 

Marlin/src/lcd/menu/menu_tune.cpp

@@ -147,10 +147,8 @@ void menu_tune() {
 
     #if HAS_FAN1 || HAS_FAN2 || HAS_FAN3 || HAS_FAN4 || HAS_FAN5 || HAS_FAN6 || HAS_FAN7
       auto fan_edit_items = [&](const uint8_t f) {
-        MENU_ITEM_IF(1) {
-          editable.uint8 = thermalManager.fan_speed[f];
-          EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update);
-        }
+        editable.uint8 = thermalManager.fan_speed[f];
+        EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update);
         #if ENABLED(EXTRA_FAN_SPEED)
           EDIT_ITEM_FAST_N(percent, f, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[f], 3, 255);
         #endif
@@ -160,18 +158,14 @@ void menu_tune() {
     #define SNFAN(N) (ENABLED(SINGLENOZZLE_STANDBY_FAN) && !HAS_FAN##N && EXTRUDERS > N)
     #if SNFAN(1) || SNFAN(2) || SNFAN(3) || SNFAN(4) || SNFAN(5) || SNFAN(6) || SNFAN(7)
       auto singlenozzle_item = [&](const uint8_t f) {
-        MENU_ITEM_IF(1) {
-          editable.uint8 = singlenozzle_fan_speed[f];
-          EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update);
-        }
+        editable.uint8 = singlenozzle_fan_speed[f];
+        EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update);
       };
     #endif
 
     #if HAS_FAN0
-      MENU_ITEM_IF(1) {
-        editable.uint8 = thermalManager.fan_speed[0];
-        EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update);
-      }
+      editable.uint8 = thermalManager.fan_speed[0];
+      EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update);
       #if ENABLED(EXTRA_FAN_SPEED)
         EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255);
       #endif

Marlin/src/lcd/menu/menu_ubl.cpp

@@ -579,9 +579,9 @@ void _lcd_ubl_step_by_step() {
 void _lcd_ubl_level_bed() {
   START_MENU();
   BACK_ITEM(MSG_MOTION);
-  MENU_ITEM_IF (planner.leveling_active)
+  if (planner.leveling_active)
     GCODES_ITEM(MSG_UBL_DEACTIVATE_MESH, PSTR("G29 D"));
-  MENU_ITEM_ELSE
+  else
     GCODES_ITEM(MSG_UBL_ACTIVATE_MESH, PSTR("G29 A"));
   SUBMENU(MSG_UBL_STEP_BY_STEP_MENU, _lcd_ubl_step_by_step);
   ACTION_ITEM(MSG_UBL_MESH_EDIT, _lcd_ubl_output_map_lcd_cmd);