andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Advance experiments. Not working yet.

pull/1/head
Erik van der Zalm 13 years ago
parent
805d37f77b
commit
e7dca8614b
4 changed files with 61 additions and 65 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 45
      Marlin/Configuration.h
  2. 3
      Marlin/Marlin.pde
  3. 60
      Marlin/stepper.cpp
  4. 6
      Marlin/watchdog.pde

45
Marlin/Configuration.h
View File

@ -11,7 +11,7 @@
// Frequency limit
// See nophead's blog for more info
// Not working OK
// Not working O
//#define XY_FREQUENCY_LIMIT 15
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
@ -31,7 +31,7 @@
// Sanguinololu 1.2 and above = 62
// Ultimaker = 7,
// Teensylu = 8
#define MOTHERBOARD 7
#define MOTHERBOARD 5
//===========================================================================
//=============================Thermal Settings ============================
@ -45,9 +45,9 @@
// 5 is ParCan supplied 104GT-2 100K
// 6 is EPCOS 100k
// 7 is 100k Honeywell thermistor 135-104LAG-J01
#define THERMISTORHEATER_0 3
#define THERMISTORHEATER_1 3
#define THERMISTORBED 3
//#define THERMISTORHEATER_0 3
//#define THERMISTORHEATER_1 3
//#define THERMISTORBED 3
//#define HEATER_0_USES_THERMISTOR
//#define HEATER_1_USES_THERMISTOR
@ -120,9 +120,15 @@
// #define DEFAULT_Ki (2*Kp/PID_SWING_AT_CRITIAL*PID_dT)
// #define DEFAULT_Kd (PID_SWING_AT_CRITIAL/8./PID_dT)
// Ultitmaker
#define DEFAULT_Kp 22.2
#define DEFAULT_Ki (1.25*PID_dT)
#define DEFAULT_Kd (99/PID_dT)
// Mendel Parts V9 on 12V
// #define DEFAULT_Kp 63.0
// #define DEFAULT_Ki (2.25*PID_dT)
// #define DEFAULT_Kd (440/PID_dT)
#endif
#ifdef PID_PI
@ -141,13 +147,6 @@
#endif // PIDTEMP
//===========================================================================
//=============================Mechanical Settings===========================
//===========================================================================
@ -178,10 +177,10 @@ const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the
//#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
//#define INVERT_E_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_E_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
//#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
//#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
//#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
//#define INVERT_E_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
//// ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -243,13 +242,10 @@ const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the
// The watchdog waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature
// this enables the watchdog interrupt.
#define USE_WATCHDOG
//#define USE_WATCHDOG
// you cannot reboot on a mega2560 due to a bug in he bootloader. Hence, you have to reset manually, and this is done hereby:
#define RESET_MANUAL
#define WATCHDOG_TIMEOUT 4 //seconds
//#define RESET_MANUAL
//#define WATCHDOG_TIMEOUT 4 //seconds
// extruder advance constant (s2/mm3)
//
@ -275,7 +271,7 @@ const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the
//#define ULTRA_LCD //general lcd support, also 16x2
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
#define ULTIPANEL
//#define ULTIPANEL
#ifdef ULTIPANEL
// #define NEWPANEL //enable this if you have a click-encoder panel
#define SDSUPPORT
@ -307,8 +303,7 @@ const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the
#define AUTOTEMP_FACTOR 1000. //current target temperature= min+largest buffered espeeds)*FACTOR
const int dropsegments=0; //everything with less than this number of steps will be ignored as move and joined with the next movement
const int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
//===========================================================================
//=============================Buffers ============================

3
Marlin/Marlin.pde
View File

@ -232,10 +232,9 @@ void setup()
axis_steps_per_sqr_second[i] = max_acceleration_units_per_sq_second[i] * axis_steps_per_unit[i];
}
tp_init(); // Initialize temperature loop
plan_init(); // Initialize planner;
st_init(); // Initialize stepper;
tp_init(); // Initialize temperature loop
}

60
Marlin/stepper.cpp
View File

@ -56,8 +56,8 @@ static unsigned long step_events_completed; // The number of step events execute
#ifdef ADVANCE
static long advance_rate, advance, final_advance = 0;
static short old_advance = 0;
static short e_steps;
#endif
static short e_steps;
static unsigned char busy = false; // TRUE when SIG_OUTPUT_COMPARE1A is being serviced. Used to avoid retriggering that handler.
static long acceleration_time, deceleration_time;
//static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate;
@ -156,7 +156,7 @@ asm volatile ( \
#define DISABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 &= ~(1<<OCIE1A)
void endstops_triggered(const unsigned long &stepstaken)
inline void endstops_triggered(const unsigned long &stepstaken)
{
//this will only work if there is no bufferig
//however, if you perform a move at which the endstops should be triggered, and wait for it to complete, i.e. by blocking command, it should work
@ -296,9 +296,9 @@ ISR(TIMER1_COMPA_vect)
counter_z = counter_x;
counter_e = counter_x;
step_events_completed = 0;
#ifdef ADVANCE
// #ifdef ADVANCE
e_steps = 0;
#endif
// #endif
}
else {
// DISABLE_STEPPER_DRIVER_INTERRUPT();
@ -309,29 +309,6 @@ ISR(TIMER1_COMPA_vect)
// Set directions TO DO This should be done once during init of trapezoid. Endstops -> interrupt
out_bits = current_block->direction_bits;
#ifdef ADVANCE
// Calculate E early.
counter_e += current_block->steps_e;
if (counter_e > 0) {
counter_e -= current_block->step_event_count;
if ((out_bits & (1<<E_AXIS)) != 0) { // - direction
CRITICAL_SECTION_START;
e_steps--;
CRITICAL_SECTION_END;
}
else {
CRITICAL_SECTION_START;
e_steps++;
CRITICAL_SECTION_END;
}
}
// Do E steps + advance steps
CRITICAL_SECTION_START;
e_steps += ((advance >> 16) - old_advance);
CRITICAL_SECTION_END;
old_advance = advance >> 16;
#endif //ADVANCE
// Set direction en check limit switches
if ((out_bits & (1<<X_AXIS)) != 0) { // -direction
WRITE(X_DIR_PIN, INVERT_X_DIR);
@ -390,7 +367,7 @@ ISR(TIMER1_COMPA_vect)
#endif
#if Z_MIN_PIN > -1
if(READ(Z_MIN_PIN) != ENDSTOPS_INVERTING) {
endstops_triggered(step_events_completed);
// endstops_triggered(step_events_completed);
step_events_completed = current_block->step_event_count;
}
#endif
@ -416,6 +393,30 @@ ISR(TIMER1_COMPA_vect)
#endif //!ADVANCE
for(int8_t i=0; i < step_loops; i++) { // Take multiple steps per interrupt (For high speed moves)
/*
counter_e += current_block->steps_e;
if (counter_e > 0) {
counter_e -= current_block->step_event_count;
if ((out_bits & (1<<E_AXIS)) != 0) { // - direction
CRITICAL_SECTION_START;
e_steps--;
CRITICAL_SECTION_END;
}
else {
CRITICAL_SECTION_START;
e_steps++;
CRITICAL_SECTION_END;
}
}
*/
/*
// Do E steps + advance steps
CRITICAL_SECTION_START;
e_steps += ((advance >> 16) - old_advance);
CRITICAL_SECTION_END;
old_advance = advance >> 16;
*/
counter_x += current_block->steps_x;
if (counter_x > 0) {
WRITE(X_STEP_PIN, HIGH);
@ -649,7 +650,8 @@ void st_init()
TCCR1B = (TCCR1B & ~(0x07<<CS10)) | (2<<CS10); // 2MHz timer
OCR1A = 0x4000;
DISABLE_STEPPER_DRIVER_INTERRUPT();
TCNT1 = 0;
ENABLE_STEPPER_DRIVER_INTERRUPT();
#ifdef ADVANCE
e_steps = 0;

6
Marlin/watchdog.pde
View File

@ -19,15 +19,15 @@ void(* ctrlaltdelete) (void) = 0; //does not work on my atmega2560
/// intialise watch dog with a 1 sec interrupt time
void wd_init()
{
WDTCSR = (1<<WDCE )|(1<<WDE ); //allow changes
WDTCSR = (1<<WDIF)|(1<<WDIE)| (1<<WDCE )|(1<<WDE )| (1<<WDP2 )|(1<<WDP1)|(0<<WDP0);
WDTCSR |= (1<<WDCE )|(1<<WDE ); //allow changes
WDTCSR = (1<<WDCE )|(1<<WDE )|(1<<WDP3 )|(1<<WDP0); // Reset after 8 sec.
// WDTCSR = (1<<WDIF)|(1<<WDIE)| (1<<WDCE )|(1<<WDE )| (1<<WDP3) | (1<<WDP0);
}
/// reset watchdog. MUST be called every 1s after init or avr will reset.
void wd_reset()
{
wdt_reset();
timeout_seconds=0; //reset counter for resets
}
//===========================================================================

Write Preview
Loading…
Cancel
Save