Sync config to examples

Marlin/Configuration.h

@@ -486,12 +486,13 @@
   //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
   //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
                                   // Set/get with gcode: M301 E[extruder number, 0-2]
+
   #if ENABLED(PID_PARAMS_PER_HOTEND)
     // Specify between 1 and HOTENDS values per array.
     // If fewer than EXTRUDER values are provided, the last element will be repeated.
-    #define DEFAULT_Kp_LIST {  22.20,  20.0 }
+    #define DEFAULT_Kp_LIST {  22.20,  22.20 }
-    #define DEFAULT_Ki_LIST {   1.08,   1.0 }
+    #define DEFAULT_Ki_LIST {   1.08,   1.08 }
-    #define DEFAULT_Kd_LIST { 114.00, 112.0 }
+    #define DEFAULT_Kd_LIST { 114.00, 114.00 }
   #else
     #define DEFAULT_Kp  22.20
     #define DEFAULT_Ki   1.08

Marlin/Configuration_adv.h

@@ -771,6 +771,7 @@
 //
 //#define ASSISTED_TRAMMING
 #if ENABLED(ASSISTED_TRAMMING)
+
   // Define positions for probing points, use the hotend as reference not the sensor.
   #define TRAMMING_POINT_XY { {  20, 20 }, { 200,  20 }, { 200, 200 }, { 20, 200 } }
 
@@ -793,6 +794,7 @@
    *   M5: 50 = Clockwise, 51 = Counter-Clockwise
    */
   #define TRAMMING_SCREW_THREAD 30
+
 #endif
 
 // @section motion