diff --git a/Marlin/src/core/types.h b/Marlin/src/core/types.h
index 20519e1888..d77dba38d9 100644
--- a/Marlin/src/core/types.h
+++ b/Marlin/src/core/types.h
@@ -72,6 +72,12 @@ struct IF<true, L, R> { typedef L type; };
 //
 typedef float feedRate_t;
 
+//
+// celsius_t is the native unit of temperature. Signed to handle a disconnected thermistor value (-14).
+// For more resolition (e.g., for a chocolate printer) this may later be changed to Celsius x 100
+//
+typedef int16_t celsius_t;
+
 // Conversion macros
 #define MMM_TO_MMS(MM_M) feedRate_t(float(MM_M) / 60.0f)
 #define MMS_TO_MMM(MM_S) (float(MM_S) * 60.0f)
diff --git a/Marlin/src/feature/mmu/mmu2.cpp b/Marlin/src/feature/mmu/mmu2.cpp
index a1bec36e45..d4238400c7 100644
--- a/Marlin/src/feature/mmu/mmu2.cpp
+++ b/Marlin/src/feature/mmu/mmu2.cpp
@@ -775,7 +775,7 @@ void MMU2::manage_response(const bool move_axes, const bool turn_off_nozzle) {
   bool response = false;
   mmu_print_saved = false;
   xyz_pos_t resume_position;
-  int16_t resume_hotend_temp = thermalManager.degTargetHotend(active_extruder);
+  celsius_t resume_hotend_temp = thermalManager.degTargetHotend(active_extruder);
 
   KEEPALIVE_STATE(PAUSED_FOR_USER);
 
diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp
index a6a28925ed..5f3338139a 100644
--- a/Marlin/src/feature/pause.cpp
+++ b/Marlin/src/feature/pause.cpp
@@ -555,7 +555,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
  * - Send host action for resume, if configured
  * - Resume the current SD print job, if any
  */
-void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/, int16_t targetTemp/*=0*/ DXC_ARGS) {
+void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/, const celsius_t targetTemp/*=0*/ DXC_ARGS) {
   DEBUG_SECTION(rp, "resume_print", true);
   DEBUG_ECHOLNPAIR("... slowlen:", slow_load_length, " fastlen:", fast_load_length, " purgelen:", purge_length, " maxbeep:", max_beep_count, " targetTemp:", targetTemp DXC_SAY);
 
@@ -577,9 +577,8 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le
     thermalManager.reset_hotend_idle_timer(e);
   }
 
-  if (targetTemp > thermalManager.degTargetHotend(active_extruder)) {
+  if (targetTemp > thermalManager.degTargetHotend(active_extruder))
     thermalManager.setTargetHotend(targetTemp, active_extruder);
-  }
 
   // Load the new filament
   load_filament(slow_load_length, fast_load_length, purge_length, max_beep_count, true, nozzle_timed_out, PAUSE_MODE_SAME DXC_PASS);
diff --git a/Marlin/src/feature/pause.h b/Marlin/src/feature/pause.h
index 7e58d4564e..4ab33ac519 100644
--- a/Marlin/src/feature/pause.h
+++ b/Marlin/src/feature/pause.h
@@ -90,7 +90,7 @@ bool pause_print(const float &retract, const xyz_pos_t &park_point, const float
 void wait_for_confirmation(const bool is_reload=false, const int8_t max_beep_count=0 DXC_PARAMS);
 
 void resume_print(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=ADVANCED_PAUSE_PURGE_LENGTH,
-                    const int8_t max_beep_count=0, int16_t targetTemp=0 DXC_PARAMS);
+                    const int8_t max_beep_count=0, const celsius_t targetTemp=0 DXC_PARAMS);
 
 bool load_filament(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=0, const int8_t max_beep_count=0,
                     const bool show_lcd=false, const bool pause_for_user=false, const PauseMode mode=PAUSE_MODE_PAUSE_PRINT DXC_PARAMS);
diff --git a/Marlin/src/feature/powerloss.cpp b/Marlin/src/feature/powerloss.cpp
index 1bb3a7e915..cc45d6ecf0 100644
--- a/Marlin/src/feature/powerloss.cpp
+++ b/Marlin/src/feature/powerloss.cpp
@@ -201,10 +201,10 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=0*/
     #endif
 
     #if EXTRUDERS
-      HOTEND_LOOP() info.target_temperature[e] = thermalManager.temp_hotend[e].target;
+      HOTEND_LOOP() info.target_temperature[e] = thermalManager.degTargetHotend(e);
     #endif
 
-    TERN_(HAS_HEATED_BED, info.target_temperature_bed = thermalManager.temp_bed.target);
+    TERN_(HAS_HEATED_BED, info.target_temperature_bed = thermalManager.degTargetBed());
 
     #if HAS_FAN
       COPY(info.fan_speed, thermalManager.fan_speed);
@@ -343,7 +343,7 @@ void PrintJobRecovery::resume() {
   #endif
 
   #if HAS_HEATED_BED
-    const int16_t bt = info.target_temperature_bed;
+    const celsius_t bt = info.target_temperature_bed;
     if (bt) {
       // Restore the bed temperature
       sprintf_P(cmd, PSTR("M190 S%i"), bt);
@@ -354,7 +354,7 @@ void PrintJobRecovery::resume() {
   // Restore all hotend temperatures
   #if HAS_HOTEND
     HOTEND_LOOP() {
-      const int16_t et = info.target_temperature[e];
+      const celsius_t et = info.target_temperature[e];
       if (et) {
         #if HAS_MULTI_HOTEND
           sprintf_P(cmd, PSTR("T%i S"), e);
diff --git a/Marlin/src/feature/powerloss.h b/Marlin/src/feature/powerloss.h
index 25581e1723..12d11b141e 100644
--- a/Marlin/src/feature/powerloss.h
+++ b/Marlin/src/feature/powerloss.h
@@ -66,8 +66,8 @@ typedef struct {
     float filament_size[EXTRUDERS];
   #endif
 
-  TERN_(HAS_HOTEND,     int16_t target_temperature[HOTENDS]);
-  TERN_(HAS_HEATED_BED, int16_t target_temperature_bed);
+  TERN_(HAS_HOTEND,     celsius_t target_temperature[HOTENDS]);
+  TERN_(HAS_HEATED_BED, celsius_t target_temperature_bed);
   TERN_(HAS_FAN,        uint8_t fan_speed[FAN_COUNT]);
 
   TERN_(HAS_LEVELING, float fade);
diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp
index ed29959055..0468b79363 100644
--- a/Marlin/src/gcode/bedlevel/G26.cpp
+++ b/Marlin/src/gcode/bedlevel/G26.cpp
@@ -533,7 +533,7 @@ void GcodeSuite::G26() {
   #if HAS_HEATED_BED
 
     // Get a temperature from 'I' or 'B'
-    int16_t bedtemp = 0;
+    celsius_t bedtemp = 0;
 
     // Use the 'I' index if temperature presets are defined
     #if PREHEAT_COUNT
@@ -616,7 +616,7 @@ void GcodeSuite::G26() {
   g26_extrusion_multiplier *= g26_filament_diameter * sq(g26_nozzle) / sq(0.3); // Scale up by nozzle size
 
   // Get a temperature from 'I' or 'H'
-  int16_t noztemp = 0;
+  celsius_t noztemp = 0;
 
   // Accept 'I' if temperature presets are defined
   #if PREHEAT_COUNT
diff --git a/Marlin/src/gcode/lcd/M145.cpp b/Marlin/src/gcode/lcd/M145.cpp
index 84a7e75aa4..d6a57d2215 100644
--- a/Marlin/src/gcode/lcd/M145.cpp
+++ b/Marlin/src/gcode/lcd/M145.cpp
@@ -27,6 +27,10 @@
 #include "../gcode.h"
 #include "../../lcd/marlinui.h"
 
+#if HAS_HOTEND
+  #include "../../module/temperature.h"
+#endif
+
 /**
  * M145: Set the heatup state for a material in the LCD menu
  *
@@ -43,7 +47,7 @@ void GcodeSuite::M145() {
     preheat_t &mat = ui.material_preset[material];
     #if HAS_HOTEND
       if (parser.seenval('H'))
-        mat.hotend_temp = constrain(parser.value_int(), EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP) - (HOTEND_OVERSHOOT));
+        mat.hotend_temp = constrain(parser.value_int(), EXTRUDE_MINTEMP, thermalManager.hotend_max_target(0));
     #endif
     #if HAS_HEATED_BED
       if (parser.seenval('B'))
diff --git a/Marlin/src/gcode/parser.h b/Marlin/src/gcode/parser.h
index 221500e076..b21c930cfa 100644
--- a/Marlin/src/gcode/parser.h
+++ b/Marlin/src/gcode/parser.h
@@ -352,50 +352,45 @@ public:
       static inline PGM_P temp_units_name() {
         return input_temp_units == TEMPUNIT_K ? PSTR("Kelvin") : input_temp_units == TEMPUNIT_F ? PSTR("Fahrenheit") : PSTR("Celsius");
       }
-      static inline float to_temp_units(const float &f) {
+      static inline float to_temp_units(celsius_t c) {
         switch (input_temp_units) {
-          case TEMPUNIT_F:
-            return f * 0.5555555556f + 32;
-          case TEMPUNIT_K:
-            return f + 273.15f;
-          case TEMPUNIT_C:
           default:
-            return f;
+          case TEMPUNIT_C: return c;
+          case TEMPUNIT_K: return c + 273.15f;
+          case TEMPUNIT_F: return c * 0.5555555556f + 32;
         }
       }
 
     #endif // HAS_LCD_MENU && !DISABLE_M503
 
-    static inline float value_celsius() {
-      const float f = value_float();
+    static inline celsius_t value_celsius() {
+      float f = value_float();
       switch (input_temp_units) {
-        case TEMPUNIT_F:
-          return (f - 32) * 0.5555555556f;
-        case TEMPUNIT_K:
-          return f - 273.15f;
-        case TEMPUNIT_C:
         default:
-          return f;
+        case TEMPUNIT_C: break;
+        case TEMPUNIT_K: f -= 273.15f;
+        case TEMPUNIT_F: f = (f - 32) * 0.5555555556f;
       }
+      return LROUND(f + 0.5f);
     }
 
-    static inline float value_celsius_diff() {
+    static inline celsius_t value_celsius_diff() {
+      float f = value_float();
       switch (input_temp_units) {
-        case TEMPUNIT_F:
-          return value_float() * 0.5555555556f;
-        case TEMPUNIT_C:
-        case TEMPUNIT_K:
         default:
-          return value_float();
+        case TEMPUNIT_C:
+        case TEMPUNIT_K: break;
+        case TEMPUNIT_F: f *= 0.5555555556f;
       }
+      return LROUND(f + 0.5f);
     }
 
   #else // !TEMPERATURE_UNITS_SUPPORT
 
     static inline float to_temp_units(int16_t c) { return (float)c; }
 
-    static inline float value_celsius()      { return value_float(); }
-    static inline float value_celsius_diff() { return value_float(); }
+    static inline celsius_t value_celsius()      { return value_int(); }
+    static inline celsius_t value_celsius_diff() { return value_int(); }
 
   #endif // !TEMPERATURE_UNITS_SUPPORT
 
@@ -404,16 +399,16 @@ public:
   void unknown_command_warning();
 
   // Provide simple value accessors with default option
-  static inline char*    stringval(const char c, char * const dval=nullptr) { return seenval(c) ? value_string()   : dval; }
-  static inline float    floatval(const char c, const float dval=0.0)   { return seenval(c) ? value_float()        : dval; }
-  static inline bool     boolval(const char c, const bool dval=false)   { return seenval(c) ? value_bool()         : (seen(c) ? true : dval); }
-  static inline uint8_t  byteval(const char c, const uint8_t dval=0)    { return seenval(c) ? value_byte()         : dval; }
-  static inline int16_t  intval(const char c, const int16_t dval=0)     { return seenval(c) ? value_int()          : dval; }
-  static inline uint16_t ushortval(const char c, const uint16_t dval=0) { return seenval(c) ? value_ushort()       : dval; }
-  static inline int32_t  longval(const char c, const int32_t dval=0)    { return seenval(c) ? value_long()         : dval; }
-  static inline uint32_t ulongval(const char c, const uint32_t dval=0)  { return seenval(c) ? value_ulong()        : dval; }
-  static inline float    linearval(const char c, const float dval=0)    { return seenval(c) ? value_linear_units() : dval; }
-  static inline float    celsiusval(const char c, const float dval=0)   { return seenval(c) ? value_celsius()      : dval; }
+  static inline char*     stringval(const char c, char * const dval=nullptr) { return seenval(c) ? value_string()   : dval; }
+  static inline float     floatval(const char c, const float dval=0.0)   { return seenval(c) ? value_float()        : dval; }
+  static inline bool      boolval(const char c, const bool dval=false)   { return seenval(c) ? value_bool()         : (seen(c) ? true : dval); }
+  static inline uint8_t   byteval(const char c, const uint8_t dval=0)    { return seenval(c) ? value_byte()         : dval; }
+  static inline int16_t   intval(const char c, const int16_t dval=0)     { return seenval(c) ? value_int()          : dval; }
+  static inline uint16_t  ushortval(const char c, const uint16_t dval=0) { return seenval(c) ? value_ushort()       : dval; }
+  static inline int32_t   longval(const char c, const int32_t dval=0)    { return seenval(c) ? value_long()         : dval; }
+  static inline uint32_t  ulongval(const char c, const uint32_t dval=0)  { return seenval(c) ? value_ulong()        : dval; }
+  static inline float     linearval(const char c, const float dval=0)    { return seenval(c) ? value_linear_units() : dval; }
+  static inline celsius_t celsiusval(const char c, const float dval=0)   { return seenval(c) ? value_celsius()      : dval; }
 
   #if ENABLED(MARLIN_DEV_MODE)
 
diff --git a/Marlin/src/gcode/temp/M104_M109.cpp b/Marlin/src/gcode/temp/M104_M109.cpp
index 07e46e1775..fe1e834656 100644
--- a/Marlin/src/gcode/temp/M104_M109.cpp
+++ b/Marlin/src/gcode/temp/M104_M109.cpp
@@ -69,7 +69,7 @@ void GcodeSuite::M104() {
   #endif
 
   bool got_temp = false;
-  int16_t temp = 0;
+  celsius_t temp = 0;
 
   // Accept 'I' if temperature presets are defined
   #if PREHEAT_COUNT
@@ -145,7 +145,7 @@ void GcodeSuite::M109() {
   #endif
 
   bool got_temp = false;
-  int16_t temp = 0;
+  celsius_t temp = 0;
 
   // Accept 'I' if temperature presets are defined
   #if PREHEAT_COUNT
@@ -161,7 +161,7 @@ void GcodeSuite::M109() {
   if (!got_temp) {
     no_wait_for_cooling = parser.seenval('S');
     got_temp = no_wait_for_cooling || parser.seenval('R');
-    if (got_temp) temp = int16_t(parser.value_celsius());
+    if (got_temp) temp = parser.value_celsius();
   }
 
   if (got_temp) {
diff --git a/Marlin/src/gcode/temp/M140_M190.cpp b/Marlin/src/gcode/temp/M140_M190.cpp
index 9a1a0287d9..3aed878a03 100644
--- a/Marlin/src/gcode/temp/M140_M190.cpp
+++ b/Marlin/src/gcode/temp/M140_M190.cpp
@@ -44,7 +44,7 @@ void GcodeSuite::M140() {
   if (DEBUGGING(DRYRUN)) return;
 
   bool got_temp = false;
-  int16_t temp = 0;
+  celsius_t temp = 0;
 
   // Accept 'I' if temperature presets are defined
   #if PREHEAT_COUNT
@@ -94,7 +94,7 @@ void GcodeSuite::M190() {
   if (DEBUGGING(DRYRUN)) return;
 
   bool got_temp = false;
-  int16_t temp = 0;
+  celsius_t temp = 0;
 
   // Accept 'I' if temperature presets are defined
   #if PREHEAT_COUNT
@@ -110,7 +110,7 @@ void GcodeSuite::M190() {
   if (!got_temp) {
     no_wait_for_cooling = parser.seenval('S');
     got_temp = no_wait_for_cooling || parser.seenval('R');
-    if (got_temp) temp = int16_t(parser.value_celsius());
+    if (got_temp) temp = parser.value_celsius();
   }
 
   if (!got_temp) return;
diff --git a/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp b/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
index 653a384120..3f4cc23aba 100644
--- a/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
+++ b/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
@@ -520,15 +520,15 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
 FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char prefix, const bool blink) {
   #if HAS_HEATED_BED
     const bool isBed = TERN(HAS_HEATED_CHAMBER, heater_id == H_BED, heater_id < 0);
-    const float t1 = (isBed ? thermalManager.degBed()       : thermalManager.degHotend(heater_id)),
-                t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id));
+    const celsius_t t1 = (isBed ? thermalManager.degBed()       : thermalManager.degHotend(heater_id)),
+                    t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id));
   #else
-    const float t1 = thermalManager.degHotend(heater_id), t2 = thermalManager.degTargetHotend(heater_id);
+    const celsius_t t1 = thermalManager.degHotend(heater_id), t2 = thermalManager.degTargetHotend(heater_id);
   #endif
 
   if (prefix >= 0) lcd_put_wchar(prefix);
 
-  lcd_put_u8str(i16tostr3rj(t1 + 0.5));
+  lcd_put_u8str(i16tostr3rj(t1));
   lcd_put_wchar('/');
 
   #if !HEATER_IDLE_HANDLER
@@ -541,7 +541,7 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char pr
     }
     else
   #endif
-      lcd_put_u8str(i16tostr3left(t2 + 0.5));
+      lcd_put_u8str(i16tostr3left(t2));
 
   if (prefix >= 0) {
     lcd_put_wchar(LCD_STR_DEGREE[0]);
diff --git a/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp b/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp
index 44128cc9f8..fd72f94862 100644
--- a/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp
+++ b/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp
@@ -434,33 +434,32 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char *p
   uint8_t pic_hot_bits;
   #if HAS_HEATED_BED
     const bool isBed = heater_id < 0;
-    const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater_id));
-    const float t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id));
+    const celsius_t t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater_id)),
+                    t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id));
   #else
-    const float t1 = thermalManager.degHotend(heater_id);
-    const float t2 = thermalManager.degTargetHotend(heater_id);
+    const celsius_t t1 = thermalManager.degHotend(heater_id), t2 = thermalManager.degTargetHotend(heater_id);
   #endif
 
   #if HOTENDS < 2
     if (heater_id == H_E0) {
       lcd.setCursor(2, 5);  lcd.print(prefix); //HE
-      lcd.setCursor(1, 6);  lcd.print(i16tostr3rj(t1 + 0.5));
+      lcd.setCursor(1, 6);  lcd.print(i16tostr3rj(t1));
       lcd.setCursor(1, 7);
     }
     else {
       lcd.setCursor(6, 5);  lcd.print(prefix); //BED
-      lcd.setCursor(6, 6);  lcd.print(i16tostr3rj(t1 + 0.5));
+      lcd.setCursor(6, 6);  lcd.print(i16tostr3rj(t1));
       lcd.setCursor(6, 7);
     }
   #else
     if (heater_id > H_BED) {
-      lcd.setCursor(heater_id * 4, 5);  lcd.print(prefix); //HE1 or HE2 or HE3
-      lcd.setCursor(heater_id * 4, 6);  lcd.print(i16tostr3rj(t1 + 0.5));
+      lcd.setCursor(heater_id * 4, 5);  lcd.print(prefix); // HE1 or HE2 or HE3
+      lcd.setCursor(heater_id * 4, 6);  lcd.print(i16tostr3rj(t1));
       lcd.setCursor(heater_id * 4, 7);
     }
     else {
       lcd.setCursor(13, 5);  lcd.print(prefix); //BED
-      lcd.setCursor(13, 6);  lcd.print(i16tostr3rj(t1 + 0.5));
+      lcd.setCursor(13, 6);  lcd.print(i16tostr3rj(t1));
       lcd.setCursor(13, 7);
     }
   #endif // HOTENDS <= 1
@@ -475,7 +474,7 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char *p
     }
     else
   #endif // !HEATER_IDLE_HANDLER
-      lcd.print(i16tostr3rj(t2 + 0.5));
+      lcd.print(i16tostr3rj(t2));
 
   switch (heater_id) {
     case H_BED: pic_hot_bits = ICON_BED;   break;
diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
index 892ab5218b..7d97a1cdcf 100644
--- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
+++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
@@ -187,7 +187,7 @@
 #define PROGRESS_BAR_Y (EXTRAS_BASELINE + 1)
 #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
 
-FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) {
+FORCE_INLINE void _draw_centered_temp(const celsius_t temp, const uint8_t tx, const uint8_t ty) {
   const char *str = i16tostr3rj(temp);
   const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1;
   lcd_put_u8str(tx - len * (INFO_FONT_WIDTH) / 2 + 1, ty, &str[3-len]);
@@ -206,8 +206,8 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
 
     const uint8_t tx = STATUS_HOTEND_TEXT_X(heater_id);
 
-    const float temp = thermalManager.degHotend(heater_id),
-              target = thermalManager.degTargetHotend(heater_id);
+    const celsius_t temp = thermalManager.degHotend(heater_id),
+                  target = thermalManager.degTargetHotend(heater_id);
 
     #if DISABLED(STATUS_HOTEND_ANIM)
       #define STATIC_HOTEND true
@@ -277,11 +277,11 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
       #else
         constexpr bool dodraw = true;
       #endif
-      if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
+      if (dodraw) _draw_centered_temp(target, tx, 7);
     }
 
     if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
-      _draw_centered_temp(temp + 0.5f, tx, 28);
+      _draw_centered_temp(temp, tx, 28);
 
     if (STATIC_HOTEND && HOTEND_DOT && PAGE_CONTAINS(17, 19)) {
       u8g.setColorIndex(0); // set to white on black
@@ -303,8 +303,8 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
 
     const uint8_t tx = STATUS_BED_TEXT_X;
 
-    const float temp = thermalManager.degBed(),
-              target = thermalManager.degTargetBed();
+    const celsius_t temp = thermalManager.degBed(),
+                  target = thermalManager.degTargetBed();
 
     #if ENABLED(STATUS_HEAT_PERCENT) || DISABLED(STATUS_BED_ANIM)
       const bool isHeat = BED_ALT();
@@ -350,11 +350,11 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
       #else
         constexpr bool dodraw = true;
       #endif
-      if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
+      if (dodraw) _draw_centered_temp(target, tx, 7);
     }
 
     if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
-      _draw_centered_temp(temp + 0.5f, tx, 28);
+      _draw_centered_temp(temp, tx, 28);
 
     if (STATIC_BED && BED_DOT && PAGE_CONTAINS(17, 19)) {
       u8g.setColorIndex(0); // set to white on black
@@ -370,10 +370,10 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
   FORCE_INLINE void _draw_chamber_status() {
     #if HAS_HEATED_CHAMBER
       if (PAGE_UNDER(7))
-        _draw_centered_temp(thermalManager.degTargetChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 7);
+        _draw_centered_temp(thermalManager.degTargetChamber(), STATUS_CHAMBER_TEXT_X, 7);
     #endif
     if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
-      _draw_centered_temp(thermalManager.degChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 28);
+      _draw_centered_temp(thermalManager.degChamber(), STATUS_CHAMBER_TEXT_X, 28);
   }
 #endif
 
diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
index a538121d2c..dcb65f676d 100644
--- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
+++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
@@ -691,15 +691,15 @@ bool ST7920_Lite_Status_Screen::indicators_changed() {
   // We only add the target temperatures to the checksum
   // because the actual temps fluctuate so by updating
   // them only during blinks we gain a bit of stability.
-  const bool       blink             = ui.get_blink();
-  const uint16_t   feedrate_perc     = feedrate_percentage;
-  const uint16_t   fs                = thermalManager.scaledFanSpeed(0);
-  const int16_t    extruder_1_target = thermalManager.degTargetHotend(0);
+  const bool blink = ui.get_blink();
+  const uint16_t feedrate_perc = feedrate_percentage;
+  const uint16_t fs = thermalManager.scaledFanSpeed(0);
+  const celsius_t extruder_1_target = thermalManager.degTargetHotend(0);
   #if HAS_MULTI_HOTEND
-    const int16_t  extruder_2_target = thermalManager.degTargetHotend(1);
+    const celsius_t extruder_2_target = thermalManager.degTargetHotend(1);
   #endif
   #if HAS_HEATED_BED
-    const int16_t  bed_target        = thermalManager.degTargetBed();
+    const celsius_t bed_target = thermalManager.degTargetBed();
   #endif
   static uint16_t last_checksum = 0;
   const uint16_t checksum = blink ^ feedrate_perc ^ fs ^ extruder_1_target
@@ -712,19 +712,19 @@ bool ST7920_Lite_Status_Screen::indicators_changed() {
 
 void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
   if (forceUpdate || indicators_changed()) {
-    const bool       blink             = ui.get_blink();
-    const duration_t elapsed           = print_job_timer.duration();
-    duration_t       remaining         = TERN0(USE_M73_REMAINING_TIME, ui.get_remaining_time());
-    const uint16_t   feedrate_perc     = feedrate_percentage;
-    const int16_t    extruder_1_temp   = thermalManager.degHotend(0),
-                     extruder_1_target = thermalManager.degTargetHotend(0);
+    const bool       blink              = ui.get_blink();
+    const duration_t elapsed            = print_job_timer.duration();
+    duration_t       remaining          = TERN0(USE_M73_REMAINING_TIME, ui.get_remaining_time());
+    const uint16_t   feedrate_perc      = feedrate_percentage;
+    const celsius_t  extruder_1_temp    = thermalManager.degHotend(0),
+                     extruder_1_target  = thermalManager.degTargetHotend(0);
     #if HAS_MULTI_HOTEND
-      const int16_t  extruder_2_temp   = thermalManager.degHotend(1),
-                     extruder_2_target = thermalManager.degTargetHotend(1);
+      const celsius_t extruder_2_temp   = thermalManager.degHotend(1),
+                      extruder_2_target = thermalManager.degTargetHotend(1);
     #endif
     #if HAS_HEATED_BED
-      const int16_t  bed_temp          = thermalManager.degBed(),
-                     bed_target        = thermalManager.degTargetBed();
+      const celsius_t bed_temp          = thermalManager.degBed(),
+                      bed_target        = thermalManager.degTargetBed();
     #endif
 
     draw_extruder_1_temp(extruder_1_temp, extruder_1_target, forceUpdate);
diff --git a/Marlin/src/lcd/dwin/e3v2/dwin.cpp b/Marlin/src/lcd/dwin/e3v2/dwin.cpp
index 60a22f22f1..0e9b93525d 100644
--- a/Marlin/src/lcd/dwin/e3v2/dwin.cpp
+++ b/Marlin/src/lcd/dwin/e3v2/dwin.cpp
@@ -1578,20 +1578,22 @@ void _draw_xyz_position(const bool force) {
 
 void update_variable() {
   #if HAS_HOTEND
-    static float _hotendtemp = 0;
-    const bool _new_hotend_temp = _hotendtemp != thermalManager.temp_hotend[0].celsius;
-    if (_new_hotend_temp) _hotendtemp = thermalManager.temp_hotend[0].celsius;
-    static int16_t _hotendtarget = 0;
-    const bool _new_hotend_target = _hotendtarget != thermalManager.temp_hotend[0].target;
-    if (_new_hotend_target) _hotendtarget = thermalManager.temp_hotend[0].target;
+    static celsius_t _hotendtemp = 0, _hotendtarget = 0;
+    const celsius_t hc = thermalManager.degHotend(0),
+                    ht = thermalManager.degTargetHotend(0);
+    const bool _new_hotend_temp = _hotendtemp != hc,
+               _new_hotend_target = _hotendtarget != ht;
+    if (_new_hotend_temp) _hotendtemp = hc;
+    if (_new_hotend_target) _hotendtarget = ht;
   #endif
   #if HAS_HEATED_BED
-    static float _bedtemp = 0;
-    const bool _new_bed_temp = _bedtemp != thermalManager.temp_bed.celsius;
-    if (_new_bed_temp) _bedtemp = thermalManager.temp_bed.celsius;
-    static int16_t _bedtarget = 0;
-    const bool _new_bed_target = _bedtarget != thermalManager.temp_bed.target;
-    if (_new_bed_target) _bedtarget = thermalManager.temp_bed.target;
+    static celsius_t _bedtemp = 0, _bedtarget = 0;
+    const celsius_t bc = thermalManager.degBed(),
+                    bt = thermalManager.degTargetBed();
+    const bool _new_bed_temp = _bedtemp != bc,
+               _new_bed_target = _bedtarget != bt;
+    if (_new_bed_temp) _bedtemp = bc;
+    if (_new_bed_target) _bedtarget = bt;
   #endif
   #if HAS_FAN
     static uint8_t _fanspeed = 0;
diff --git a/Marlin/src/lcd/dwin/e3v2/dwin.h b/Marlin/src/lcd/dwin/e3v2/dwin.h
index 217127ed11..9e0cda86c2 100644
--- a/Marlin/src/lcd/dwin/e3v2/dwin.h
+++ b/Marlin/src/lcd/dwin/e3v2/dwin.h
@@ -234,8 +234,8 @@ extern char print_filename[16];
 extern millis_t dwin_heat_time;
 
 typedef struct {
-  TERN_(HAS_HOTEND,     int16_t E_Temp    = 0);
-  TERN_(HAS_HEATED_BED, int16_t Bed_Temp  = 0);
+  TERN_(HAS_HOTEND,     celsius_t E_Temp    = 0);
+  TERN_(HAS_HEATED_BED, celsius_t Bed_Temp  = 0);
   TERN_(HAS_FAN,        int16_t Fan_speed = 0);
   int16_t print_speed     = 100;
   float Max_Feedspeed     = 0;
diff --git a/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp
index 93a7de14a1..473fcb954c 100644
--- a/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp
@@ -388,28 +388,28 @@ void DGUSScreenHandler::HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr
 }
 
 void DGUSScreenHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr) {
-  uint16_t newvalue = swap16(*(uint16_t*)val_ptr);
-  uint16_t acceptedvalue;
+  celsius_t newvalue = swap16(*(uint16_t*)val_ptr);
+  celsius_t acceptedvalue;
 
   switch (var.VP) {
     default: return;
     #if HOTENDS >= 1
       case VP_T_E0_Set:
-        NOMORE(newvalue, (uint16_t)HEATER_0_MAXTEMP);
+        NOMORE(newvalue, HEATER_0_MAXTEMP);
         thermalManager.setTargetHotend(newvalue, 0);
         acceptedvalue = thermalManager.degTargetHotend(0);
         break;
     #endif
     #if HOTENDS >= 2
       case VP_T_E1_Set:
-        NOMORE(newvalue, (uint16_t)HEATER_1_MAXTEMP);
+        NOMORE(newvalue, HEATER_1_MAXTEMP);
         thermalManager.setTargetHotend(newvalue, 1);
         acceptedvalue = thermalManager.degTargetHotend(1);
         break;
     #endif
     #if HAS_HEATED_BED
       case VP_T_Bed_Set:
-        NOMORE(newvalue, (uint16_t)BED_MAXTEMP);
+        NOMORE(newvalue, BED_MAXTEMP);
         thermalManager.setTargetBed(newvalue);
         acceptedvalue = thermalManager.degTargetBed();
         break;
diff --git a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp
index 467444c214..ee0a1c749f 100644
--- a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp
@@ -367,7 +367,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
 
   // Temperature Data
   #if HOTENDS >= 1
-    VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -388,7 +388,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     #endif
   #endif
   #if HOTENDS >= 2
-    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
@@ -400,7 +400,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
   #endif
   #if HAS_HEATED_BED
-    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
     VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
diff --git a/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp
index 536640ec95..d3c4510fb3 100644
--- a/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp
@@ -364,13 +364,13 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr),
   #endif
 
-  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
   // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
-  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplay },
+  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay },
 
   // Temperature Data
   #if HOTENDS >= 1
-    VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -391,7 +391,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     #endif
   #endif
   #if HOTENDS >= 2
-    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
@@ -399,7 +399,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
   #endif
   #if HAS_HEATED_BED
-    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
     VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
diff --git a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp
index 9f436a356c..25e1670740 100644
--- a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp
@@ -548,7 +548,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
 
   // Temperature Data
   #if HOTENDS >= 1
-    VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -573,7 +573,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
 
   #if HOTENDS >= 2
-    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
@@ -593,7 +593,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
 
   #if HAS_HEATED_BED
-    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
     VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
diff --git a/Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp
index 8d89de3e33..e232bf9b96 100644
--- a/Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp
@@ -216,7 +216,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     #endif
   #endif
   #if HOTENDS >= 2
-    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
@@ -227,7 +227,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     #endif
   #endif
   #if HAS_HEATED_BED
-    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>),
+    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
     VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.cpp b/Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.cpp
index 767d9c6738..3fed4cc385 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.cpp
+++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.cpp
@@ -515,7 +515,7 @@ void filament_dialog_handle() {
   }
 
   if (uiCfg.filament_load_heat_flg) {
-    const int16_t diff = thermalManager.degHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temp;
+    const celsius_t diff = thermalManager.degHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temp;
     if (abs(diff) < 2 || diff > 0) {
       uiCfg.filament_load_heat_flg = false;
       lv_clear_dialog();
@@ -531,7 +531,7 @@ void filament_dialog_handle() {
   }
 
   if (uiCfg.filament_unload_heat_flg) {
-    const int16_t diff = thermalManager.degHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temp;
+    const celsius_t diff = thermalManager.degHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temp;
     if (abs(diff) < 2 || diff > 0) {
       uiCfg.filament_unload_heat_flg = false;
       lv_clear_dialog();
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
index a7f219965a..3098a6666c 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
+++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
@@ -202,7 +202,7 @@ typedef struct {
             filamentchange_load_speed,
             filamentchange_unload_length,
             filamentchange_unload_speed;
-  int16_t   filament_limit_temp;
+  celsius_t filament_limit_temp;
   float     pausePosX, pausePosY, pausePosZ;
   uint32_t  curFilesize;
 } CFG_ITMES;
@@ -244,7 +244,7 @@ typedef struct {
            filament_loading_time_cnt,
            filament_unloading_time_cnt;
   float move_dist;
-  float hotendTargetTempBak;
+  celsius_t hotendTargetTempBak;
   float current_x_position_bak,
         current_y_position_bak,
         current_z_position_bak,
diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h
index 1c9e80c75e..6f5703e622 100644
--- a/Marlin/src/lcd/marlinui.h
+++ b/Marlin/src/lcd/marlinui.h
@@ -110,9 +110,9 @@
 
 #if PREHEAT_COUNT
   typedef struct {
-    TERN_(HAS_HOTEND,     uint16_t hotend_temp);
-    TERN_(HAS_HEATED_BED, uint16_t bed_temp   );
-    TERN_(HAS_FAN,        uint16_t fan_speed  );
+    TERN_(HAS_HOTEND,     celsius_t hotend_temp);
+    TERN_(HAS_HEATED_BED, celsius_t bed_temp   );
+    TERN_(HAS_FAN,        uint16_t  fan_speed  );
   } preheat_t;
 #endif
 
diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp
index 71f09a5aee..7ef49f0cf8 100644
--- a/Marlin/src/lcd/menu/menu_configuration.cpp
+++ b/Marlin/src/lcd/menu/menu_configuration.cpp
@@ -325,10 +325,10 @@ void menu_advanced_settings();
       EDIT_ITEM_N(percent, m, MSG_FAN_SPEED, &editable.uint8, 0, 255, []{ ui.material_preset[MenuItemBase::itemIndex].fan_speed = editable.uint8; });
     #endif
     #if HAS_TEMP_HOTEND
-      EDIT_ITEM(uint16_3, MSG_NOZZLE, &ui.material_preset[m].hotend_temp, MINTEMP_ALL, MAXTEMP_ALL - HOTEND_OVERSHOOT);
+      EDIT_ITEM(int3, MSG_NOZZLE, &ui.material_preset[m].hotend_temp, MINTEMP_ALL, MAXTEMP_ALL - (HOTEND_OVERSHOOT));
     #endif
     #if HAS_HEATED_BED
-      EDIT_ITEM(uint16_3, MSG_BED, &ui.material_preset[m].bed_temp, BED_MINTEMP, BED_MAX_TARGET);
+      EDIT_ITEM(int3, MSG_BED, &ui.material_preset[m].bed_temp, BED_MINTEMP, BED_MAX_TARGET);
     #endif
     #if ENABLED(EEPROM_SETTINGS)
       ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
diff --git a/Marlin/src/lcd/tft/ui_320x240.cpp b/Marlin/src/lcd/tft/ui_320x240.cpp
index fb82188645..37a44f51b4 100644
--- a/Marlin/src/lcd/tft/ui_320x240.cpp
+++ b/Marlin/src/lcd/tft/ui_320x240.cpp
@@ -114,7 +114,7 @@ void MarlinUI::draw_kill_screen() {
 void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater) {
   MarlinImage image = imgHotEnd;
   uint16_t Color;
-  float currentTemperature, targetTemperature;
+  celsius_t currentTemperature, targetTemperature;
 
   if (Heater >= 0) { // HotEnd
     currentTemperature = thermalManager.degHotend(Heater);
@@ -175,13 +175,13 @@ void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater) {
 
   tft.add_image(0, 18, image, Color);
 
-  tft_string.set((uint8_t *)i16tostr3rj(currentTemperature + 0.5));
+  tft_string.set((uint8_t *)i16tostr3rj(currentTemperature));
   tft_string.add(LCD_STR_DEGREE);
   tft_string.trim();
   tft.add_text(tft_string.center(64) + 2, 72, Color, tft_string);
 
   if (targetTemperature >= 0) {
-    tft_string.set((uint8_t *)i16tostr3rj(targetTemperature + 0.5));
+    tft_string.set((uint8_t *)i16tostr3rj(targetTemperature));
     tft_string.add(LCD_STR_DEGREE);
     tft_string.trim();
     tft.add_text(tft_string.center(64) + 2, 8, Color, tft_string);
diff --git a/Marlin/src/lcd/tft/ui_480x320.cpp b/Marlin/src/lcd/tft/ui_480x320.cpp
index 164785a229..81e4603ea4 100644
--- a/Marlin/src/lcd/tft/ui_480x320.cpp
+++ b/Marlin/src/lcd/tft/ui_480x320.cpp
@@ -114,7 +114,7 @@ void MarlinUI::draw_kill_screen() {
 void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater) {
   MarlinImage image = imgHotEnd;
   uint16_t Color;
-  float currentTemperature, targetTemperature;
+  celsius_t currentTemperature, targetTemperature;
 
   if (Heater >= 0) { // HotEnd
     currentTemperature = thermalManager.degHotend(Heater);
@@ -168,13 +168,13 @@ void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater) {
 
   tft.add_image(8, 28, image, Color);
 
-  tft_string.set((uint8_t *)i16tostr3rj(currentTemperature + 0.5));
+  tft_string.set((uint8_t *)i16tostr3rj(currentTemperature));
   tft_string.add(LCD_STR_DEGREE);
   tft_string.trim();
   tft.add_text(tft_string.center(80) + 2, 82, Color, tft_string);
 
   if (targetTemperature >= 0) {
-    tft_string.set((uint8_t *)i16tostr3rj(targetTemperature + 0.5));
+    tft_string.set((uint8_t *)i16tostr3rj(targetTemperature));
     tft_string.add(LCD_STR_DEGREE);
     tft_string.trim();
     tft.add_text(tft_string.center(80) + 2, 8, Color, tft_string);
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index 2f4f5e283a..b0a4890e07 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -940,11 +940,11 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
 
   DualXMode dual_x_carriage_mode         = DEFAULT_DUAL_X_CARRIAGE_MODE;
   float inactive_extruder_x              = X2_MAX_POS,                    // Used in mode 0 & 1
-        duplicate_extruder_x_offset      = DEFAULT_DUPLICATION_X_OFFSET;  // Used in mode 2
+        duplicate_extruder_x_offset      = DEFAULT_DUPLICATION_X_OFFSET;  // Used in mode 2 & 3
   xyz_pos_t raised_parked_position;                                       // Used in mode 1
-  bool active_extruder_parked            = false;                         // Used in mode 1 & 2
+  bool active_extruder_parked            = false;                         // Used in mode 1, 2 & 3
   millis_t delayed_move_time             = 0;                             // Used in mode 1
-  int16_t duplicate_extruder_temp_offset = 0;                             // Used in mode 2
+  celsius_t duplicate_extruder_temp_offset = 0;                           // Used in mode 2 & 3
   bool idex_mirrored_mode                = false;                         // Used in mode 3
 
   float x_home_pos(const uint8_t extruder) {
diff --git a/Marlin/src/module/motion.h b/Marlin/src/module/motion.h
index 0328d015a4..7b8d2f2018 100644
--- a/Marlin/src/module/motion.h
+++ b/Marlin/src/module/motion.h
@@ -463,13 +463,13 @@ FORCE_INLINE bool all_axes_trusted()                        { return xyz_bits ==
   };
 
   extern DualXMode dual_x_carriage_mode;
-  extern float inactive_extruder_x,               // Used in mode 0 & 1
-               duplicate_extruder_x_offset;       // Used in mode 2 & 3
-  extern xyz_pos_t raised_parked_position;        // Used in mode 1
-  extern bool active_extruder_parked;             // Used in mode 1, 2 & 3
-  extern millis_t delayed_move_time;              // Used in mode 1
-  extern int16_t duplicate_extruder_temp_offset;  // Used in mode 2 & 3
-  extern bool idex_mirrored_mode;                 // Used in mode 3
+  extern float inactive_extruder_x,                 // Used in mode 0 & 1
+               duplicate_extruder_x_offset;         // Used in mode 2 & 3
+  extern xyz_pos_t raised_parked_position;          // Used in mode 1
+  extern bool active_extruder_parked;               // Used in mode 1, 2 & 3
+  extern millis_t delayed_move_time;                // Used in mode 1
+  extern celsius_t duplicate_extruder_temp_offset;  // Used in mode 2 & 3
+  extern bool idex_mirrored_mode;                   // Used in mode 3
 
   FORCE_INLINE bool idex_is_duplicating() { return dual_x_carriage_mode >= DXC_DUPLICATION_MODE; }
 
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index 594671f87a..8c320925be 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -197,9 +197,9 @@ float Planner::steps_to_mm[XYZE_N];             // (mm) Millimeters per step
 skew_factor_t Planner::skew_factor; // Initialized by settings.load()
 
 #if ENABLED(AUTOTEMP)
-  float Planner::autotemp_max = 250,
-        Planner::autotemp_min = 210,
-        Planner::autotemp_factor = 0.1f;
+  celsius_t Planner::autotemp_max = 250,
+            Planner::autotemp_min = 210;
+  float Planner::autotemp_factor = 0.1f;
   bool Planner::autotemp_enabled = false;
 #endif
 
@@ -1376,7 +1376,7 @@ void Planner::check_axes_activity() {
 
   #if ENABLED(AUTOTEMP_PROPORTIONAL)
     void Planner::_autotemp_update_from_hotend() {
-      const int16_t target = thermalManager.degTargetHotend(active_extruder);
+      const celsius_t target = thermalManager.degTargetHotend(active_extruder);
       autotemp_min = target + AUTOTEMP_MIN_P;
       autotemp_max = target + AUTOTEMP_MAX_P;
     }
diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h
index 7ebba1e342..769967d4a6 100644
--- a/Marlin/src/module/planner.h
+++ b/Marlin/src/module/planner.h
@@ -896,7 +896,8 @@ class Planner {
     #endif
 
     #if ENABLED(AUTOTEMP)
-      static float autotemp_min, autotemp_max, autotemp_factor;
+      static celsius_t autotemp_min, autotemp_max;
+      static float autotemp_factor;
       static bool autotemp_enabled;
       static void autotemp_update();
       static void autotemp_M104_M109();
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index dd7a36a82a..6d1f3bd0a3 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -253,7 +253,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
 
 #if HAS_HOTEND
   hotend_info_t Temperature::temp_hotend[HOTEND_TEMPS]; // = { 0 }
-  const uint16_t Temperature::hotend_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
+  const celsius_t Temperature::hotend_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
 #endif
 
 #if ENABLED(AUTO_POWER_E_FANS)
@@ -368,12 +368,8 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
 #if HAS_HEATED_BED
   bed_info_t Temperature::temp_bed; // = { 0 }
   // Init min and max temp with extreme values to prevent false errors during startup
-  #ifdef BED_MINTEMP
-    int16_t Temperature::mintemp_raw_BED = TEMP_SENSOR_BED_RAW_LO_TEMP;
-  #endif
-  #ifdef BED_MAXTEMP
-    int16_t Temperature::maxtemp_raw_BED = TEMP_SENSOR_BED_RAW_HI_TEMP;
-  #endif
+  int16_t Temperature::mintemp_raw_BED = TEMP_SENSOR_BED_RAW_LO_TEMP,
+          Temperature::maxtemp_raw_BED = TEMP_SENSOR_BED_RAW_HI_TEMP;
   TERN_(WATCH_BED, bed_watch_t Temperature::watch_bed); // = { 0 }
   IF_DISABLED(PIDTEMPBED, millis_t Temperature::next_bed_check_ms);
 #endif
@@ -383,12 +379,8 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
   #if HAS_HEATED_CHAMBER
     millis_t next_cool_check_ms_2 = 0;
     float old_temp = 9999;
-    #ifdef CHAMBER_MINTEMP
-      int16_t Temperature::mintemp_raw_CHAMBER = TEMP_SENSOR_CHAMBER_RAW_LO_TEMP;
-    #endif
-    #ifdef CHAMBER_MAXTEMP
-      int16_t Temperature::maxtemp_raw_CHAMBER = TEMP_SENSOR_CHAMBER_RAW_HI_TEMP;
-    #endif
+    int16_t Temperature::mintemp_raw_CHAMBER = TEMP_SENSOR_CHAMBER_RAW_LO_TEMP,
+            Temperature::maxtemp_raw_CHAMBER = TEMP_SENSOR_CHAMBER_RAW_HI_TEMP;
     TERN_(WATCH_CHAMBER, chamber_watch_t Temperature::watch_chamber{0});
     IF_DISABLED(PIDTEMPCHAMBER, millis_t Temperature::next_chamber_check_ms);
   #endif
@@ -400,12 +392,8 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
     bool flag_cooler_state;
     //bool flag_cooler_excess = false;
     float previous_temp = 9999;
-    #ifdef COOLER_MINTEMP
-      int16_t Temperature::mintemp_raw_COOLER = TEMP_SENSOR_COOLER_RAW_LO_TEMP;
-    #endif
-    #ifdef COOLER_MAXTEMP
-      int16_t Temperature::maxtemp_raw_COOLER = TEMP_SENSOR_COOLER_RAW_HI_TEMP;
-    #endif
+    int16_t Temperature::mintemp_raw_COOLER = TEMP_SENSOR_COOLER_RAW_LO_TEMP,
+            Temperature::maxtemp_raw_COOLER = TEMP_SENSOR_COOLER_RAW_HI_TEMP;
     #if WATCH_COOLER
       cooler_watch_t Temperature::watch_cooler{0};
     #endif
@@ -419,7 +407,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
 
 #if ENABLED(PREVENT_COLD_EXTRUSION)
   bool Temperature::allow_cold_extrude = false;
-  int16_t Temperature::extrude_min_temp = EXTRUDE_MINTEMP;
+  celsius_t Temperature::extrude_min_temp = EXTRUDE_MINTEMP;
 #endif
 
 // private:
@@ -429,7 +417,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
 #endif
 
 #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
-  uint16_t Temperature::redundant_temperature_raw = 0;
+  celsius_t Temperature::redundant_temperature_raw = 0;
   float Temperature::redundant_temperature = 0.0;
 #endif
 
@@ -474,7 +462,7 @@ volatile bool Temperature::raw_temps_ready = false;
 #endif
 
 #if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
-  uint16_t Temperature::singlenozzle_temp[EXTRUDERS];
+  celsius_t Temperature::singlenozzle_temp[EXTRUDERS];
   #if HAS_FAN
     uint8_t Temperature::singlenozzle_fan_speed[EXTRUDERS];
   #endif
@@ -1566,22 +1554,22 @@ void Temperature::manage_heater() {
  * Bisect search for the range of the 'raw' value, then interpolate
  * proportionally between the under and over values.
  */
-#define SCAN_THERMISTOR_TABLE(TBL,LEN) do{                            \
-  uint8_t l = 0, r = LEN, m;                                          \
-  for (;;) {                                                          \
-    m = (l + r) >> 1;                                                 \
-    if (!m) return int16_t(pgm_read_word(&TBL[0].celsius));           \
-    if (m == l || m == r) return int16_t(pgm_read_word(&TBL[LEN-1].celsius)); \
-    int16_t v00 = pgm_read_word(&TBL[m-1].value),                     \
-          v10 = pgm_read_word(&TBL[m-0].value);                       \
-         if (raw < v00) r = m;                                        \
-    else if (raw > v10) l = m;                                        \
-    else {                                                            \
-      const int16_t v01 = int16_t(pgm_read_word(&TBL[m-1].celsius)),  \
-                  v11 = int16_t(pgm_read_word(&TBL[m-0].celsius));    \
-      return v01 + (raw - v00) * float(v11 - v01) / float(v10 - v00); \
-    }                                                                 \
-  }                                                                   \
+#define SCAN_THERMISTOR_TABLE(TBL,LEN) do{                                \
+  uint8_t l = 0, r = LEN, m;                                              \
+  for (;;) {                                                              \
+    m = (l + r) >> 1;                                                     \
+    if (!m) return celsius_t(pgm_read_word(&TBL[0].celsius));             \
+    if (m == l || m == r) return celsius_t(pgm_read_word(&TBL[LEN-1].celsius)); \
+    int16_t v00 = pgm_read_word(&TBL[m-1].value),                         \
+            v10 = pgm_read_word(&TBL[m-0].value);                         \
+         if (raw < v00) r = m;                                            \
+    else if (raw > v10) l = m;                                            \
+    else {                                                                \
+      const celsius_t v01 = celsius_t(pgm_read_word(&TBL[m-1].celsius)),  \
+                      v11 = celsius_t(pgm_read_word(&TBL[m-0].celsius));  \
+      return v01 + (raw - v00) * float(v11 - v01) / float(v10 - v00);     \
+    }                                                                     \
+  }                                                                       \
 }while(0)
 
 #if HAS_USER_THERMISTORS
@@ -1663,7 +1651,7 @@ void Temperature::manage_heater() {
     SERIAL_EOL();
   }
 
-  float Temperature::user_thermistor_to_deg_c(const uint8_t t_index, const int raw) {
+  celsius_t Temperature::user_thermistor_to_deg_c(const uint8_t t_index, const int raw) {
     //#if (MOTHERBOARD == BOARD_RAMPS_14_EFB)
     //  static uint32_t clocks_total = 0;
     //  static uint32_t calls = 0;
@@ -1712,7 +1700,7 @@ void Temperature::manage_heater() {
 #if HAS_HOTEND
   // Derived from RepRap FiveD extruder::getTemperature()
   // For hot end temperature measurement.
-  float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
+  celsius_t Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
       if (e > HOTENDS - DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)) {
         SERIAL_ERROR_START();
         SERIAL_ECHO(e);
@@ -1821,7 +1809,7 @@ void Temperature::manage_heater() {
 
 #if HAS_HEATED_BED
   // For bed temperature measurement.
-  float Temperature::analog_to_celsius_bed(const int raw) {
+  celsius_t Temperature::analog_to_celsius_bed(const int raw) {
     #if TEMP_SENSOR_BED_IS_CUSTOM
       return user_thermistor_to_deg_c(CTI_BED, raw);
     #elif TEMP_SENSOR_BED_IS_THERMISTOR
@@ -1839,7 +1827,7 @@ void Temperature::manage_heater() {
 
 #if HAS_TEMP_CHAMBER
   // For chamber temperature measurement.
-  float Temperature::analog_to_celsius_chamber(const int raw) {
+  celsius_t Temperature::analog_to_celsius_chamber(const int raw) {
     #if TEMP_SENSOR_CHAMBER_IS_CUSTOM
       return user_thermistor_to_deg_c(CTI_CHAMBER, raw);
     #elif TEMP_SENSOR_CHAMBER_IS_THERMISTOR
@@ -1857,7 +1845,7 @@ void Temperature::manage_heater() {
 
 #if HAS_TEMP_COOLER
   // For cooler temperature measurement.
-  float Temperature::analog_to_celsius_cooler(const int raw) {
+  celsius_t Temperature::analog_to_celsius_cooler(const int raw) {
     #if TEMP_SENSOR_COOLER_IS_CUSTOM
       return user_thermistor_to_deg_c(CTI_COOLER, raw);
     #elif TEMP_SENSOR_COOLER_IS_THERMISTOR
@@ -1875,7 +1863,7 @@ void Temperature::manage_heater() {
 
 #if HAS_TEMP_PROBE
   // For probe temperature measurement.
-  float Temperature::analog_to_celsius_probe(const int raw) {
+  celsius_t Temperature::analog_to_celsius_probe(const int raw) {
     #if TEMP_SENSOR_PROBE_IS_CUSTOM
       return user_thermistor_to_deg_c(CTI_PROBE, raw);
     #elif TEMP_SENSOR_PROBE_IS_THERMISTOR
@@ -2191,13 +2179,13 @@ void Temperature::init() {
   #if HAS_HOTEND
 
     #define _TEMP_MIN_E(NR) do{ \
-      const int16_t tmin = _MAX(HEATER_##NR##_MINTEMP, TERN(TEMP_SENSOR_##NR##_IS_CUSTOM, 0, (int16_t)pgm_read_word(&TEMPTABLE_##NR [TEMP_SENSOR_##NR##_MINTEMP_IND].celsius))); \
+      const celsius_t tmin = _MAX(HEATER_##NR##_MINTEMP, TERN(TEMP_SENSOR_##NR##_IS_CUSTOM, 0, pgm_read_word(&TEMPTABLE_##NR [TEMP_SENSOR_##NR##_MINTEMP_IND].celsius))); \
       temp_range[NR].mintemp = tmin; \
       while (analog_to_celsius_hotend(temp_range[NR].raw_min, NR) < tmin) \
         temp_range[NR].raw_min += TEMPDIR(NR) * (OVERSAMPLENR); \
     }while(0)
     #define _TEMP_MAX_E(NR) do{ \
-      const int16_t tmax = _MIN(HEATER_##NR##_MAXTEMP, TERN(TEMP_SENSOR_##NR##_IS_CUSTOM, 2000, (int16_t)pgm_read_word(&TEMPTABLE_##NR [TEMP_SENSOR_##NR##_MAXTEMP_IND].celsius) - 1)); \
+      const celsius_t tmax = _MIN(HEATER_##NR##_MAXTEMP, TERN(TEMP_SENSOR_##NR##_IS_CUSTOM, 2000, pgm_read_word(&TEMPTABLE_##NR [TEMP_SENSOR_##NR##_MAXTEMP_IND].celsius) - 1)); \
       temp_range[NR].maxtemp = tmax; \
       while (analog_to_celsius_hotend(temp_range[NR].raw_max, NR) > tmax) \
         temp_range[NR].raw_max -= TEMPDIR(NR) * (OVERSAMPLENR); \
@@ -2257,30 +2245,18 @@ void Temperature::init() {
   #endif // HAS_HOTEND
 
   #if HAS_HEATED_BED
-    #ifdef BED_MINTEMP
-      while (analog_to_celsius_bed(mintemp_raw_BED) < BED_MINTEMP) mintemp_raw_BED += TEMPDIR(BED) * (OVERSAMPLENR);
-    #endif
-    #ifdef BED_MAXTEMP
-      while (analog_to_celsius_bed(maxtemp_raw_BED) > BED_MAXTEMP) maxtemp_raw_BED -= TEMPDIR(BED) * (OVERSAMPLENR);
-    #endif
-  #endif // HAS_HEATED_BED
+    while (analog_to_celsius_bed(mintemp_raw_BED) < BED_MINTEMP) mintemp_raw_BED += TEMPDIR(BED) * (OVERSAMPLENR);
+    while (analog_to_celsius_bed(maxtemp_raw_BED) > BED_MAXTEMP) maxtemp_raw_BED -= TEMPDIR(BED) * (OVERSAMPLENR);
+  #endif
 
   #if HAS_HEATED_CHAMBER
-    #ifdef CHAMBER_MINTEMP
-      while (analog_to_celsius_chamber(mintemp_raw_CHAMBER) < CHAMBER_MINTEMP) mintemp_raw_CHAMBER += TEMPDIR(CHAMBER) * (OVERSAMPLENR);
-    #endif
-    #ifdef CHAMBER_MAXTEMP
-      while (analog_to_celsius_chamber(maxtemp_raw_CHAMBER) > CHAMBER_MAXTEMP) maxtemp_raw_CHAMBER -= TEMPDIR(CHAMBER) * (OVERSAMPLENR);
-    #endif
+    while (analog_to_celsius_chamber(mintemp_raw_CHAMBER) < CHAMBER_MINTEMP) mintemp_raw_CHAMBER += TEMPDIR(CHAMBER) * (OVERSAMPLENR);
+    while (analog_to_celsius_chamber(maxtemp_raw_CHAMBER) > CHAMBER_MAXTEMP) maxtemp_raw_CHAMBER -= TEMPDIR(CHAMBER) * (OVERSAMPLENR);
   #endif
 
   #if HAS_COOLER
-    #ifdef COOLER_MINTEMP
-      while (analog_to_celsius_cooler(mintemp_raw_COOLER) > COOLER_MINTEMP) mintemp_raw_COOLER += TEMPDIR(COOLER) * (OVERSAMPLENR);
-    #endif
-    #ifdef COOLER_MAXTEMP
-      while (analog_to_celsius_cooler(maxtemp_raw_COOLER) < COOLER_MAXTEMP) maxtemp_raw_COOLER -= TEMPDIR(COOLER) * (OVERSAMPLENR);
-    #endif
+    while (analog_to_celsius_cooler(mintemp_raw_COOLER) > COOLER_MINTEMP) mintemp_raw_COOLER += TEMPDIR(COOLER) * (OVERSAMPLENR);
+    while (analog_to_celsius_cooler(maxtemp_raw_COOLER) < COOLER_MAXTEMP) maxtemp_raw_COOLER -= TEMPDIR(COOLER) * (OVERSAMPLENR);
   #endif
 
   TERN_(PROBING_HEATERS_OFF, paused = false);
@@ -2345,7 +2321,7 @@ void Temperature::init() {
    *
    * TODO: Embed the last 3 parameters during init, if not less optimal
    */
-  void Temperature::tr_state_machine_t::run(const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc) {
+  void Temperature::tr_state_machine_t::run(const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const celsius_t hysteresis_degc) {
 
     #if HEATER_IDLE_HANDLER
       // Convert the given heater_id_t to an idle array index
@@ -2554,7 +2530,7 @@ void Temperature::disable_all_heaters() {
 
     #if HAS_MULTI_MAX_TC
       // Needed to return the correct temp when this is called between readings
-      static uint16_t max_tc_temp_previous[MAX_TC_COUNT] = { 0 };
+      static celsius_t max_tc_temp_previous[MAX_TC_COUNT] = { 0 };
       #define THERMO_TEMP(I) max_tc_temp_previous[I]
       #define THERMO_SEL(A,B) (hindex ? (B) : (A))
       #define MAX6675_WRITE(V)     do{ switch (hindex) { case 1:      WRITE(MAX6675_SS2_PIN, V); break; default:      WRITE(MAX6675_SS_PIN, V); } }while(0)
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index 38270fc9c4..c9e3575257 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -179,7 +179,7 @@ enum ADCSensorState : char {
 typedef struct TempInfo {
   uint16_t acc;
   int16_t raw;
-  float celsius;
+  celsius_t celsius;
   inline void reset() { acc = 0; }
   inline void sample(const uint16_t s) { acc += s; }
   inline void update() { raw = acc; }
@@ -187,7 +187,7 @@ typedef struct TempInfo {
 
 // A PWM heater with temperature sensor
 typedef struct HeaterInfo : public TempInfo {
-  int16_t target;
+  celsius_t target;
   uint8_t soft_pwm_amount;
 } heater_info_t;
 
@@ -228,14 +228,14 @@ struct PIDHeaterInfo : public HeaterInfo {
 // Heater watch handling
 template <int INCREASE, int HYSTERESIS, millis_t PERIOD>
 struct HeaterWatch {
-  uint16_t target;
+  celsius_t target;
   millis_t next_ms;
   inline bool elapsed(const millis_t &ms) { return next_ms && ELAPSED(ms, next_ms); }
   inline bool elapsed() { return elapsed(millis()); }
 
-  inline void restart(const int16_t curr, const int16_t tgt) {
+  inline void restart(const celsius_t curr, const celsius_t tgt) {
     if (tgt) {
-      const int16_t newtarget = curr + INCREASE;
+      const celsius_t newtarget = curr + INCREASE;
       if (newtarget < tgt - HYSTERESIS - 1) {
         target = newtarget;
         next_ms = millis() + SEC_TO_MS(PERIOD);
@@ -261,8 +261,8 @@ struct HeaterWatch {
 
 // Temperature sensor read value ranges
 typedef struct { int16_t raw_min, raw_max; } raw_range_t;
-typedef struct { int16_t mintemp, maxtemp; } celsius_range_t;
-typedef struct { int16_t raw_min, raw_max, mintemp, maxtemp; } temp_range_t;
+typedef struct { celsius_t mintemp, maxtemp; } celsius_range_t;
+typedef struct { int16_t raw_min, raw_max; celsius_t mintemp, maxtemp; } temp_range_t;
 
 #define THERMISTOR_ABS_ZERO_C           -273.15f  // bbbbrrrrr cold !
 #define THERMISTOR_RESISTANCE_NOMINAL_C 25.0f     // mmmmm comfortable
@@ -323,8 +323,8 @@ class Temperature {
     #if HAS_HOTEND
       #define HOTEND_TEMPS (HOTENDS + ENABLED(TEMP_SENSOR_1_AS_REDUNDANT))
       static hotend_info_t temp_hotend[HOTEND_TEMPS];
-      static const uint16_t hotend_maxtemp[HOTENDS];
-      FORCE_INLINE static uint16_t hotend_max_target(const uint8_t e) { return hotend_maxtemp[e] - (HOTEND_OVERSHOOT); }
+      static const celsius_t hotend_maxtemp[HOTENDS];
+      FORCE_INLINE static celsius_t hotend_max_target(const uint8_t e) { return hotend_maxtemp[e] - (HOTEND_OVERSHOOT); }
     #endif
     TERN_(HAS_HEATED_BED, static bed_info_t temp_bed);
     TERN_(HAS_TEMP_PROBE, static probe_info_t temp_probe);
@@ -342,8 +342,8 @@ class Temperature {
 
     #if ENABLED(PREVENT_COLD_EXTRUSION)
       static bool allow_cold_extrude;
-      static int16_t extrude_min_temp;
-      FORCE_INLINE static bool tooCold(const int16_t temp) { return allow_cold_extrude ? false : temp < extrude_min_temp - (TEMP_WINDOW); }
+      static celsius_t extrude_min_temp;
+      FORCE_INLINE static bool tooCold(const celsius_t temp) { return allow_cold_extrude ? false : temp < extrude_min_temp - (TEMP_WINDOW); }
       FORCE_INLINE static bool tooColdToExtrude(const uint8_t E_NAME) {
         return tooCold(degHotend(HOTEND_INDEX));
       }
@@ -359,7 +359,7 @@ class Temperature {
     FORCE_INLINE static bool targetHotEnoughToExtrude(const uint8_t e) { return !targetTooColdToExtrude(e); }
 
     #if ENABLED(SINGLENOZZLE_STANDBY_FAN)
-      static uint16_t singlenozzle_temp[EXTRUDERS];
+      static celsius_t singlenozzle_temp[EXTRUDERS];
       #if HAS_FAN
         static uint8_t singlenozzle_fan_speed[EXTRUDERS];
       #endif
@@ -411,7 +411,7 @@ class Temperature {
 
     #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
       static uint16_t redundant_temperature_raw;
-      static float redundant_temperature;
+      static celsius_t redundant_temperature;
     #endif
 
     #if ENABLED(PID_EXTRUSION_SCALING)
@@ -424,34 +424,19 @@ class Temperature {
     #if HAS_HEATED_BED
       TERN_(WATCH_BED, static bed_watch_t watch_bed);
       IF_DISABLED(PIDTEMPBED, static millis_t next_bed_check_ms);
-      #ifdef BED_MINTEMP
-        static int16_t mintemp_raw_BED;
-      #endif
-      #ifdef BED_MAXTEMP
-        static int16_t maxtemp_raw_BED;
-      #endif
+      static int16_t mintemp_raw_BED, maxtemp_raw_BED;
     #endif
 
     #if HAS_HEATED_CHAMBER
       TERN_(WATCH_CHAMBER, static chamber_watch_t watch_chamber);
       TERN(PIDTEMPCHAMBER,,static millis_t next_chamber_check_ms);
-      #ifdef CHAMBER_MINTEMP
-        static int16_t mintemp_raw_CHAMBER;
-      #endif
-      #ifdef CHAMBER_MAXTEMP
-        static int16_t maxtemp_raw_CHAMBER;
-      #endif
+      static int16_t mintemp_raw_CHAMBER, maxtemp_raw_CHAMBER;
     #endif
 
     #if HAS_COOLER
       TERN_(WATCH_COOLER, static cooler_watch_t watch_cooler);
       static millis_t next_cooler_check_ms, cooler_fan_flush_ms;
-      #ifdef COOLER_MINTEMP
-        static int16_t mintemp_raw_COOLER;
-      #endif
-      #ifdef COOLER_MAXTEMP
-        static int16_t maxtemp_raw_COOLER;
-      #endif
+      static int16_t mintemp_raw_COOLER, maxtemp_raw_COOLER;
     #endif
 
     #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED
@@ -488,7 +473,7 @@ class Temperature {
       static user_thermistor_t user_thermistor[USER_THERMISTORS];
       static void log_user_thermistor(const uint8_t t_index, const bool eprom=false);
       static void reset_user_thermistors();
-      static float user_thermistor_to_deg_c(const uint8_t t_index, const int raw);
+      static celsius_t user_thermistor_to_deg_c(const uint8_t t_index, const int raw);
       static bool set_pull_up_res(int8_t t_index, float value) {
         //if (!WITHIN(t_index, 0, USER_THERMISTORS - 1)) return false;
         if (!WITHIN(value, 1, 1000000)) return false;
@@ -516,19 +501,19 @@ class Temperature {
     #endif
 
     #if HAS_HOTEND
-      static float analog_to_celsius_hotend(const int raw, const uint8_t e);
+      static celsius_t analog_to_celsius_hotend(const int raw, const uint8_t e);
     #endif
     #if HAS_HEATED_BED
-      static float analog_to_celsius_bed(const int raw);
+      static celsius_t analog_to_celsius_bed(const int raw);
     #endif
     #if HAS_TEMP_PROBE
-      static float analog_to_celsius_probe(const int raw);
+      static celsius_t analog_to_celsius_probe(const int raw);
     #endif
     #if HAS_TEMP_CHAMBER
-      static float analog_to_celsius_chamber(const int raw);
+      static celsius_t analog_to_celsius_chamber(const int raw);
     #endif
     #if HAS_TEMP_COOLER
-      static float analog_to_celsius_cooler(const int raw);
+      static celsius_t analog_to_celsius_cooler(const int raw);
     #endif
 
     #if HAS_FAN
@@ -620,7 +605,7 @@ class Temperature {
       }
     #endif
 
-    FORCE_INLINE static int16_t degTargetHotend(const uint8_t E_NAME) {
+    FORCE_INLINE static celsius_t degTargetHotend(const uint8_t E_NAME) {
       return TERN0(HAS_HOTEND, temp_hotend[HOTEND_INDEX].target);
     }
 
@@ -632,7 +617,7 @@ class Temperature {
 
     #if HAS_HOTEND
 
-      static void setTargetHotend(const int16_t celsius, const uint8_t E_NAME) {
+      static void setTargetHotend(const celsius_t celsius, const uint8_t E_NAME) {
         const uint8_t ee = HOTEND_INDEX;
         #ifdef MILLISECONDS_PREHEAT_TIME
           if (celsius == 0)
@@ -678,12 +663,12 @@ class Temperature {
     #if HAS_HEATED_BED
 
       #if ENABLED(SHOW_TEMP_ADC_VALUES)
-        FORCE_INLINE static int16_t rawBedTemp()  { return temp_bed.raw; }
+        FORCE_INLINE static int16_t rawBedTemp()    { return temp_bed.raw; }
       #endif
-      FORCE_INLINE static float degBed()          { return temp_bed.celsius; }
-      FORCE_INLINE static int16_t degTargetBed()  { return temp_bed.target; }
-      FORCE_INLINE static bool isHeatingBed()     { return temp_bed.target > temp_bed.celsius; }
-      FORCE_INLINE static bool isCoolingBed()     { return temp_bed.target < temp_bed.celsius; }
+      FORCE_INLINE static celsius_t degBed()        { return temp_bed.celsius; }
+      FORCE_INLINE static celsius_t degTargetBed()  { return temp_bed.target; }
+      FORCE_INLINE static bool isHeatingBed()       { return temp_bed.target > temp_bed.celsius; }
+      FORCE_INLINE static bool isCoolingBed()       { return temp_bed.target < temp_bed.celsius; }
 
       #if WATCH_BED
         static void start_watching_bed();
@@ -691,15 +676,9 @@ class Temperature {
         static inline void start_watching_bed() {}
       #endif
 
-      static void setTargetBed(const int16_t celsius) {
+      static void setTargetBed(const celsius_t celsius) {
         TERN_(AUTO_POWER_CONTROL, if (celsius) powerManager.power_on());
-        temp_bed.target =
-          #ifdef BED_MAX_TARGET
-            _MIN(celsius, BED_MAX_TARGET)
-          #else
-            celsius
-          #endif
-        ;
+        temp_bed.target = _MIN(celsius, BED_MAX_TARGET);
         start_watching_bed();
       }
 
@@ -735,14 +714,13 @@ class Temperature {
 
     #if HAS_TEMP_CHAMBER
       #if ENABLED(SHOW_TEMP_ADC_VALUES)
-        FORCE_INLINE static int16_t rawChamberTemp()    { return temp_chamber.raw; }
+        FORCE_INLINE static int16_t rawChamberTemp()      { return temp_chamber.raw; }
       #endif
-      FORCE_INLINE static float degChamber()            { return temp_chamber.celsius; }
+      FORCE_INLINE static float degChamber()              { return temp_chamber.celsius; }
       #if HAS_HEATED_CHAMBER
-        FORCE_INLINE static int16_t degTargetChamber()  { return temp_chamber.target; }
-        FORCE_INLINE static bool isHeatingChamber()     { return temp_chamber.target > temp_chamber.celsius; }
-        FORCE_INLINE static bool isCoolingChamber()     { return temp_chamber.target < temp_chamber.celsius; }
-
+        FORCE_INLINE static celsius_t degTargetChamber()  { return temp_chamber.target; }
+        FORCE_INLINE static bool isHeatingChamber()       { return temp_chamber.target > temp_chamber.celsius; }
+        FORCE_INLINE static bool isCoolingChamber()       { return temp_chamber.target < temp_chamber.celsius; }
         static bool wait_for_chamber(const bool no_wait_for_cooling=true);
       #endif
     #endif
@@ -754,27 +732,21 @@ class Temperature {
     #endif
 
     #if HAS_HEATED_CHAMBER
-      static void setTargetChamber(const int16_t celsius) {
-        temp_chamber.target =
-          #ifdef CHAMBER_MAXTEMP
-            _MIN(celsius, CHAMBER_MAXTEMP - 10)
-          #else
-            celsius
-          #endif
-        ;
+      static void setTargetChamber(const celsius_t celsius) {
+        temp_chamber.target = _MIN(celsius, CHAMBER_MAX_TARGET);
         start_watching_chamber();
       }
     #endif
 
     #if HAS_TEMP_COOLER
       #if ENABLED(SHOW_TEMP_ADC_VALUES)
-        FORCE_INLINE static int16_t rawCoolerTemp()    { return temp_cooler.raw; }
+        FORCE_INLINE static int16_t rawCoolerTemp()     { return temp_cooler.raw; }
       #endif
-      FORCE_INLINE static float degCooler()            { return temp_cooler.celsius; }
+      FORCE_INLINE static float degCooler()             { return temp_cooler.celsius; }
       #if HAS_COOLER
-        FORCE_INLINE static int16_t degTargetCooler()  { return temp_cooler.target; }
-        FORCE_INLINE static bool isLaserHeating()     { return temp_cooler.target > temp_cooler.celsius; }
-        FORCE_INLINE static bool isLaserCooling()     { return temp_cooler.target < temp_cooler.celsius; }
+        FORCE_INLINE static celsius_t degTargetCooler() { return temp_cooler.target; }
+        FORCE_INLINE static bool isLaserHeating()       { return temp_cooler.target > temp_cooler.celsius; }
+        FORCE_INLINE static bool isLaserCooling()       { return temp_cooler.target < temp_cooler.celsius; }
         static bool wait_for_cooler(const bool no_wait_for_cooling=true);
       #endif
     #endif
@@ -786,7 +758,7 @@ class Temperature {
     #endif
 
     #if HAS_COOLER
-      static void setTargetCooler(const int16_t celsius) {
+      static void setTargetCooler(const celsius_t celsius) {
         temp_cooler.target = constrain(celsius, COOLER_MIN_TARGET, COOLER_MAX_TARGET);
         start_watching_cooler();
       }
@@ -945,7 +917,7 @@ class Temperature {
         millis_t timer = 0;
         TRState state = TRInactive;
         float running_temp;
-        void run(const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc);
+        void run(const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const celsius_t hysteresis_degc);
       } tr_state_machine_t;
 
       static tr_state_machine_t tr_state_machine[NR_HEATER_RUNAWAY];
diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h
index f0ec289dfe..0871844e39 100644
--- a/Marlin/src/module/thermistor/thermistors.h
+++ b/Marlin/src/module/thermistor/thermistors.h
@@ -44,7 +44,7 @@
 
 #define ANY_THERMISTOR_IS(n) (TEMP_SENSOR_0_THERMISTOR_ID == n || TEMP_SENSOR_1_THERMISTOR_ID == n || TEMP_SENSOR_2_THERMISTOR_ID == n || TEMP_SENSOR_3_THERMISTOR_ID == n || TEMP_SENSOR_4_THERMISTOR_ID == n || TEMP_SENSOR_5_THERMISTOR_ID == n || TEMP_SENSOR_6_THERMISTOR_ID == n || TEMP_SENSOR_7_THERMISTOR_ID == n || TEMP_SENSOR_BED_THERMISTOR_ID == n || TEMP_SENSOR_CHAMBER_THERMISTOR_ID == n || TEMP_SENSOR_COOLER_THERMISTOR_ID == n || TEMP_SENSOR_PROBE_THERMISTOR_ID == n)
 
-typedef struct { int16_t value, celsius; } temp_entry_t;
+typedef struct { int16_t value; celsius_t celsius; } temp_entry_t;
 
 // Pt1000 and Pt100 handling
 //