From e4937b02853fdf9eb12dfc35be69dba056de29e8 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 4 Jun 2017 11:30:03 -0500 Subject: [PATCH] Cleanup of spacing and formatting --- Marlin/Marlin_main.cpp | 25 +++++++++++-------- .../FolgerTech-i3-2020/Configuration_adv.h | 2 +- .../M150/Configuration.h | 2 +- Marlin/example_configurations/M150/README.md | 4 +-- .../gCreate_gMax1.5+/Configuration_adv.h | 2 +- Marlin/pins_AZTEEG_X3.h | 2 +- Marlin/pins_AZTEEG_X3_PRO.h | 2 +- Marlin/stepper.cpp | 2 +- 8 files changed, 23 insertions(+), 18 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 6fbc9a60b3..e56fdaf321 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1551,7 +1551,7 @@ inline void set_destination_to_current() { COPY(destination, current_position); planner.buffer_line_kinematic(destination, MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s), active_extruder); #endif - + set_current_to_destination(); } #endif // IS_KINEMATIC @@ -2362,7 +2362,7 @@ static void clean_up_after_endstop_or_probe_move() { else { // leveling from off to on ubl.state.active = true; // enable BEFORE calling unapply_leveling, otherwise ignored // change physical current_position to unleveled current_position without moving steppers. - planner.unapply_leveling(current_position); + planner.unapply_leveling(current_position); } #else ubl.state.active = enable; // just flip the bit, current_position will be wrong until next move. @@ -2376,8 +2376,12 @@ static void clean_up_after_endstop_or_probe_move() { (void)bilinear_z_offset(reset); #endif + // Enable or disable leveling compensation in the planner planner.abl_enabled = enable; + if (!enable) + // When disabling just get the current position from the steppers. + // This will yield the smallest error when first converted back to steps. set_current_from_steppers_for_axis( #if ABL_PLANAR ALL_AXES @@ -2386,9 +2390,11 @@ static void clean_up_after_endstop_or_probe_move() { #endif ); else + // When enabling, remove compensation from the current position, + // so compensation will give the right stepper counts. planner.unapply_leveling(current_position); - #endif + #endif // ABL } } @@ -2396,24 +2402,23 @@ static void clean_up_after_endstop_or_probe_move() { void set_z_fade_height(const float zfh) { + const bool level_active = leveling_is_active(); + #if ENABLED(AUTO_BED_LEVELING_UBL) - const bool level_active = leveling_is_active(); - if (level_active) { + if (level_active) set_bed_leveling_enabled(false); // turn off before changing fade height for proper apply/unapply leveling to maintain current_position - } planner.z_fade_height = zfh; planner.inverse_z_fade_height = RECIPROCAL(zfh); - if (level_active) { + if (level_active) set_bed_leveling_enabled(true); // turn back on after changing fade height - } #else planner.z_fade_height = zfh; planner.inverse_z_fade_height = RECIPROCAL(zfh); - if (leveling_is_active()) { + if (level_active) { set_current_from_steppers_for_axis( #if ABL_PLANAR ALL_AXES @@ -9643,7 +9648,7 @@ inline void gcode_M355() { #if HAS_CASE_LIGHT uint8_t args = 0; if (parser.seen('P')) ++args, case_light_brightness = parser.value_byte(); - if (parser.seen('S')) ++args, case_light_on = parser.value_bool(); + if (parser.seen('S')) ++args, case_light_on = parser.value_bool(); if (args) update_case_light(); // always report case light status diff --git a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h index a5fd5c5e6b..803fd44bae 100644 --- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h @@ -788,7 +788,7 @@ #define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s #define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm - + // It is a short retract used immediately after print interrupt before move to filament exchange position #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm diff --git a/Marlin/example_configurations/M150/Configuration.h b/Marlin/example_configurations/M150/Configuration.h index 49e8586aee..7a1a0eaf49 100644 --- a/Marlin/example_configurations/M150/Configuration.h +++ b/Marlin/example_configurations/M150/Configuration.h @@ -318,7 +318,7 @@ #define K1 0.95 //smoothing factor within the PID // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - + // Malyan M150 example #define DEFAULT_Kp 29 #define DEFAULT_Ki 2 diff --git a/Marlin/example_configurations/M150/README.md b/Marlin/example_configurations/M150/README.md index f1dc0746ec..1d31177697 100644 --- a/Marlin/example_configurations/M150/README.md +++ b/Marlin/example_configurations/M150/README.md @@ -1,3 +1,3 @@ # Configuration for Malyan M150 hobbyking printer -# config without automatic bed level sensor -# or in other words, "as stock" +# config without automatic bed level sensor +# or in other words, "as stock" diff --git a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h index 799acd32a4..d5082fdb8b 100644 --- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h @@ -788,7 +788,7 @@ #define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s #define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm - + // It is a short retract used immediately after print interrupt before move to filament exchange position #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h index 7756a56e40..efe9e2f0fc 100644 --- a/Marlin/pins_AZTEEG_X3.h +++ b/Marlin/pins_AZTEEG_X3.h @@ -74,7 +74,7 @@ // // Misc // -#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && PIN_EXISTS(STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN +#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && PIN_EXISTS(STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN #undef STAT_LED_RED_PIN #endif diff --git a/Marlin/pins_AZTEEG_X3_PRO.h b/Marlin/pins_AZTEEG_X3_PRO.h index a267cb6cc4..53ecb4c18c 100644 --- a/Marlin/pins_AZTEEG_X3_PRO.h +++ b/Marlin/pins_AZTEEG_X3_PRO.h @@ -145,7 +145,7 @@ // // Misc. Functions // -#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN +#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN #undef DOGLCD_A0 // steal pin 44 for the case light; if you have a Viki2 and have connected it #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments // as the wiring diagram uses pin 44 for DOGLCD_A0 diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index 11b51285ee..4c35113e90 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -586,7 +586,7 @@ void Stepper::isr() { /** * If a minimum pulse time was specified get the timer 0 value. * - * TCNT0 has an 8x prescaler, so it increments every 8 cycles. + * TCNT0 has an 8x prescaler, so it increments every 8 cycles. * That's every 0.5µs on 16MHz and every 0.4µs on 20MHz. * 20 counts of TCNT0 -by itself- is a good pulse delay. * 10µs = 160 or 200 cycles.