Browse Source

🚑️ Fix preheat target bug

Fixes Jyers/Marlin#1651
vanilla_fb_2.0.x
David Ross Smith 3 years ago
committed by Scott Lahteine
parent
commit
e0f75d4f06
  1. 8
      Marlin/src/lcd/marlinui.cpp
  2. 18
      Marlin/src/lcd/marlinui.h

8
Marlin/src/lcd/marlinui.cpp

@ -150,10 +150,10 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
void MarlinUI::apply_preheat(const uint8_t m, const uint8_t pmask, const uint8_t e/*=active_extruder*/) {
const preheat_t &pre = material_preset[m];
TERN_(HAS_HOTEND, if (TEST(pmask, PM_HOTEND)) thermalManager.setTargetHotend(pre.hotend_temp, e));
TERN_(HAS_HEATED_BED, if (TEST(pmask, PM_BED)) thermalManager.setTargetBed(pre.bed_temp));
//TERN_(HAS_HEATED_CHAMBER, if (TEST(pmask, PM_CHAMBER)) thermalManager.setTargetBed(pre.chamber_temp));
TERN_(HAS_FAN, if (TEST(pmask, PM_FAN)) thermalManager.set_fan_speed(0, pre.fan_speed));
TERN_(HAS_HOTEND, if (TEST(pmask, PT_HOTEND)) thermalManager.setTargetHotend(pre.hotend_temp, e));
TERN_(HAS_HEATED_BED, if (TEST(pmask, PT_BED)) thermalManager.setTargetBed(pre.bed_temp));
//TERN_(HAS_HEATED_CHAMBER, if (TEST(pmask, PT_CHAMBER)) thermalManager.setTargetBed(pre.chamber_temp));
TERN_(HAS_FAN, if (TEST(pmask, PT_FAN)) thermalManager.set_fan_speed(0, pre.fan_speed));
}
#endif

18
Marlin/src/lcd/marlinui.h

@ -496,22 +496,20 @@ public:
#endif
#if HAS_PREHEAT
enum PreheatMask : uint8_t { PM_HOTEND = _BV(0), PM_BED = _BV(1), PM_FAN = _BV(2), PM_CHAMBER = _BV(3) };
enum PreheatTarget : uint8_t { PT_HOTEND, PT_BED, PT_FAN, PT_CHAMBER, PT_ALL = 0xFF };
static preheat_t material_preset[PREHEAT_COUNT];
static PGM_P get_preheat_label(const uint8_t m);
static void apply_preheat(const uint8_t m, const uint8_t pmask, const uint8_t e=active_extruder);
static void preheat_set_fan(const uint8_t m) { TERN_(HAS_FAN, apply_preheat(m, PM_FAN)); }
static void preheat_hotend(const uint8_t m, const uint8_t e=active_extruder) { TERN_(HAS_HOTEND, apply_preheat(m, PM_HOTEND)); }
static void preheat_set_fan(const uint8_t m) { TERN_(HAS_FAN, apply_preheat(m, _BV(PT_FAN))); }
static void preheat_hotend(const uint8_t m, const uint8_t e=active_extruder) { TERN_(HAS_HOTEND, apply_preheat(m, _BV(PT_HOTEND))); }
static void preheat_hotend_and_fan(const uint8_t m, const uint8_t e=active_extruder) { preheat_hotend(m, e); preheat_set_fan(m); }
static void preheat_bed(const uint8_t m) { TERN_(HAS_HEATED_BED, apply_preheat(m, PM_BED)); }
static void preheat_all(const uint8_t m) { apply_preheat(m, 0xFF); }
static void preheat_bed(const uint8_t m) { TERN_(HAS_HEATED_BED, apply_preheat(m, _BV(PT_BED))); }
static void preheat_all(const uint8_t m) { apply_preheat(m, PT_ALL); }
#endif
#if SCREENS_CAN_TIME_OUT
static void reset_status_timeout(const millis_t ms) { return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS; }
#else
static void reset_status_timeout(const millis_t) {}
#endif
static void reset_status_timeout(const millis_t ms) {
TERN(SCREENS_CAN_TIME_OUT, return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS, UNUSED(ms));
}
#if HAS_LCD_MENU

Loading…
Cancel
Save