Marlin code whitespace cleanup

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1392,9 +1392,9 @@
 
 #define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display 
+  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN 57  // 78 on Re-ARM
+  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN    44  // 79 on Re-ARM
+  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
 
   /**
    * Sample debug features

Marlin/src/feature/caselight.cpp

@@ -26,7 +26,7 @@
 
 uint8_t case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS;
 bool case_light_on = CASE_LIGHT_DEFAULT_ON;
-    
+
 #ifndef INVERT_CASE_LIGHT
   #define INVERT_CASE_LIGHT false
 #endif

Marlin/src/feature/dac/dac_dac084s085.cpp

@@ -74,7 +74,7 @@ void dac084s085::setValue(uint8_t channel, uint8_t value) {
 
   externalDac_buf[0] |= (value >> 4);
   externalDac_buf[1] |= (value << 4);
-  
+
   // All SPI chip-select HIGH
   digitalWrite( DAC0_SYNC , HIGH );
   #if EXTRUDERS > 1

Marlin/src/gcode/calibrate/G33.cpp

@@ -375,7 +375,7 @@ void GcodeSuite::G33() {
       float a_sum = 0.0;
       LOOP_XYZ(axis) a_sum += delta_tower_angle_trim[axis];
       LOOP_XYZ(axis) delta_tower_angle_trim[axis] -= a_sum / 3.0;
-      
+
       // adjust delta_height and endstops by the max amount
       const float z_temp = MAX3(delta_endstop_adj[A_AXIS], delta_endstop_adj[B_AXIS], delta_endstop_adj[C_AXIS]);
       home_offset[Z_AXIS] -= z_temp;

Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h

@@ -142,13 +142,13 @@ uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg
       ST7565_WRITE_BYTE(0x40);          // Display start line for Displaytech 64128N
 
       ST7565_WRITE_BYTE(0x28 | 0x04);   // power control: turn on voltage converter
-      //U8G_ESC_DLY(50);                  // delay 50 ms - hangs after a reset if used 
+      //U8G_ESC_DLY(50);                  // delay 50 ms - hangs after a reset if used
 
       ST7565_WRITE_BYTE(0x28 | 0x06);   // power control: turn on voltage regulator
-      //U8G_ESC_DLY(50);                  // delay 50 ms - hangs after a reset if used 
+      //U8G_ESC_DLY(50);                  // delay 50 ms - hangs after a reset if used
 
       ST7565_WRITE_BYTE(0x28 | 0x07);   // power control: turn on voltage follower
-      //U8G_ESC_DLY(50);                  // delay 50 ms - hangs after a reset if used 
+      //U8G_ESC_DLY(50);                  // delay 50 ms - hangs after a reset if used
 
       ST7565_WRITE_BYTE(0x10);          // Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N
 
@@ -228,12 +228,12 @@ u8g_dev_t u8g_dev_st7565_64128n_2x_VIKI_sw_spi = { u8g_dev_st7565_64128n_2x_VIKI
 
 class U8GLIB_ST7565_64128n_2x_VIKI : public U8GLIB {
   public:
-  U8GLIB_ST7565_64128n_2x_VIKI(uint8_t dummy) 
+  U8GLIB_ST7565_64128n_2x_VIKI(uint8_t dummy)
-    : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi) 
+    : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
+    {  }
+  U8GLIB_ST7565_64128n_2x_VIKI(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
+    : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
     {  }
-  U8GLIB_ST7565_64128n_2x_VIKI(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) 
-    : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi) 
-    {  }  
 };
 
 #pragma GCC reset_options

Marlin/src/lcd/ultralcd_impl_DOGM.h

@@ -176,9 +176,9 @@
   //U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0);  // 8 stripes
   U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
 #elif ENABLED(U8GLIB_ST7565_64128N)
-  // The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller 
+  // The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller
-  //U8GLIB_ST7565_64128n_2x_VIKI u8g(0);  // using SW-SPI DOGLCD_MOSI != -1 && DOGLCD_SCK 
+  //U8GLIB_ST7565_64128n_2x_VIKI u8g(0);  // using SW-SPI DOGLCD_MOSI != -1 && DOGLCD_SCK
-  U8GLIB_ST7565_64128n_2x_VIKI u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0);  // using SW-SPI 
+  U8GLIB_ST7565_64128n_2x_VIKI u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0);  // using SW-SPI
   //U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);  // 8 stripes
   //U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes  HWSPI
 #elif ENABLED(U8GLIB_SSD1306)

Marlin/src/module/stepper.h

@@ -302,7 +302,7 @@ class Stepper {
       #endif
 
       #ifdef CPU_32_BIT
-        // In case of high-performance processor, it is able to calculate in real-time 
+        // In case of high-performance processor, it is able to calculate in real-time
         timer = (uint32_t)(HAL_STEPPER_TIMER_RATE) / step_rate;
         if (timer < (HAL_STEPPER_TIMER_RATE / (STEP_DOUBLER_FREQUENCY * 2))) { // (STEP_DOUBLER_FREQUENCY * 2 kHz - this should never happen)
           timer = (HAL_STEPPER_TIMER_RATE / (STEP_DOUBLER_FREQUENCY * 2));