Merge pull request #7554 from thinkyhead/bf1_sanguino_config

Sanguinololu example config

Marlin/Marlin_main.cpp

@@ -13324,6 +13324,7 @@ void setup() {
     SERIAL_ECHOPGM(MSG_CONFIGURATION_VER);
     SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE);
     SERIAL_ECHOLNPGM(MSG_AUTHOR STRING_CONFIG_H_AUTHOR);
+    SERIAL_ECHO_START();
     SERIAL_ECHOLNPGM("Compiled: " __DATE__);
   #endif
 
@@ -13491,12 +13492,12 @@ void setup() {
   #if ENABLED(SWITCHING_NOZZLE)
     move_nozzle_servo(0);  // Initialize nozzle servo
   #endif
-  
+
   #if ENABLED(PARKING_EXTRUDER)
     #if ENABLED(PARKING_EXTRUDER_SOLENOIDS_INVERT)
       pe_activate_magnet(0);
       pe_activate_magnet(1);
-    #else 
+    #else
       pe_deactivate_magnet(0);
       pe_deactivate_magnet(1);
     #endif

Marlin/configuration_store.cpp

@@ -659,7 +659,7 @@ void MarlinSettings::postprocess() {
       #if ENABLED(EEPROM_CHITCHAT)
         SERIAL_ECHO_START();
         SERIAL_ECHOPAIR("Settings Stored (", eeprom_size - (EEPROM_OFFSET));
-        SERIAL_ECHOPAIR(" bytes; crc ", final_crc);
+        SERIAL_ECHOPAIR(" bytes; crc ", (uint32_t)final_crc);
         SERIAL_ECHOLNPGM(")");
       #endif
     }
@@ -1010,7 +1010,7 @@ void MarlinSettings::postprocess() {
           SERIAL_ECHO_START();
           SERIAL_ECHO(version);
           SERIAL_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET));
-          SERIAL_ECHOPAIR(" bytes; crc ", working_crc);
+          SERIAL_ECHOPAIR(" bytes; crc ", (uint32_t)working_crc);
           SERIAL_ECHOLNPGM(")");
         #endif
       }

Marlin/pins.h

@@ -35,27 +35,11 @@
 #ifndef __PINS_H__
 #define __PINS_H__
 
-#if MB(GEN7_CUSTOM)
+//
-  #include "pins_GEN7_CUSTOM.h"
+// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
-#elif MB(GEN7_12)
+//
-  #include "pins_GEN7_12.h"
+
-#elif MB(GEN7_13)
+#if MB(RAMPS_OLD)
-  #include "pins_GEN7_13.h"
-#elif MB(GEN7_14)
-  #include "pins_GEN7_14.h"
-#elif MB(CNCONTROLS_11)
-  #include "pins_CNCONTROLS_11.h"
-#elif MB(CNCONTROLS_12)
-  #include "pins_CNCONTROLS_12.h"
-#elif MB(CHEAPTRONIC)
-  #include "pins_CHEAPTRONIC.h"
-#elif MB(CHEAPTRONIC_V2)
-  #include "pins_CHEAPTRONICv2.h"
-#elif MB(SETHI)
-  #include "pins_SETHI.h"
-#elif MB(MIGHTYBOARD_REVE)
-  #include "pins_MIGHTYBOARD_REVE.h"
-#elif MB(RAMPS_OLD)
   #include "pins_RAMPS_OLD.h"
 #elif MB(RAMPS_13_EFB)
   #define IS_RAMPS_EFB
@@ -87,115 +71,166 @@
 #elif MB(RAMPS_14_SF)
   #define IS_RAMPS_SF
   #include "pins_RAMPS.h"
-#elif MB(GEN6)
+
-  #include "pins_GEN6.h"
+//
-#elif MB(GEN6_DELUXE)
+// RAMPS Derivatives - ATmega1280, ATmega2560
-  #include "pins_GEN6_DELUXE.h"
+//
-#elif MB(SANGUINOLOLU_11)
+
-  #include "pins_SANGUINOLOLU_11.h"
-#elif MB(SANGUINOLOLU_12)
-  #include "pins_SANGUINOLOLU_12.h"
-#elif MB(MELZI)
-  #include "pins_MELZI.h"
-#elif MB(MELZI_MAKR3D)
-  #include "pins_MELZI_MAKR3D.h"
-#elif MB(MELZI_CREALITY)
-  #include "pins_MELZI_CREALITY.h"
-#elif MB(STB_11)
-  #include "pins_STB_11.h"
-#elif MB(AZTEEG_X1)
-  #include "pins_AZTEEG_X1.h"
-#elif MB(AZTEEG_X3)
-  #include "pins_AZTEEG_X3.h"
-#elif MB(AZTEEG_X3_PRO)
-  #include "pins_AZTEEG_X3_PRO.h"
-#elif MB(ANET_10)
-  #include "pins_ANET_10.h"
-#elif MB(ULTIMAKER)
-  #include "pins_ULTIMAKER.h"
-#elif MB(ULTIMAKER_OLD)
-  #include "pins_ULTIMAKER_OLD.h"
-#elif MB(ULTIMAIN_2)
-  #include "pins_ULTIMAIN_2.h"
 #elif MB(3DRAG)
-  #include "pins_3DRAG.h"
+  #include "pins_3DRAG.h"             // ATmega1280, ATmega2560
 #elif MB(K8200)
-  #include "pins_K8200.h"
+  #include "pins_K8200.h"             // ATmega1280, ATmega2560 (3DRAG)
 #elif MB(K8400)
-  #include "pins_K8400.h"
+  #include "pins_K8400.h"             // ATmega1280, ATmega2560 (3DRAG)
-#elif MB(TEENSYLU)
+#elif MB(BAM_DICE)
-  #include "pins_TEENSYLU.h"
+  #include "pins_RAMPS.h"             // ATmega1280, ATmega2560
+#elif MB(BAM_DICE_DUE)
+  #include "pins_BAM_DICE_DUE.h"      // ATmega1280, ATmega2560
+#elif MB(MKS_BASE)
+  #include "pins_MKS_BASE.h"          // ATmega1280, ATmega2560
+#elif MB(MKS_13)
+  #include "pins_MKS_13.h"            // ATmega1280, ATmega2560
+#elif MB(ZRIB_V20)
+  #include "pins_ZRIB_V20.h"          // ATmega1280, ATmega2560 (MKS_13)
+#elif MB(FELIX2)
+  #include "pins_FELIX2.h"            // ATmega1280, ATmega2560
+#elif MB(RIGIDBOARD)
+  #include "pins_RIGIDBOARD.h"        // ATmega1280, ATmega2560
+#elif MB(RIGIDBOARD_V2)
+  #include "pins_RIGIDBOARD_V2.h"     // ATmega1280, ATmega2560
+#elif MB(SAINSMART_2IN1)
+  #include "pins_SAINSMART_2IN1.h"    // ATmega1280, ATmega2560
+#elif MB(ULTIMAKER)
+  #include "pins_ULTIMAKER.h"         // ATmega1280, ATmega2560
+#elif MB(ULTIMAKER_OLD)
+  #include "pins_ULTIMAKER_OLD.h"     // ATmega1280, ATmega2560
+#elif MB(AZTEEG_X3)
+  #include "pins_AZTEEG_X3.h"         // ATmega2560
+#elif MB(AZTEEG_X3_PRO)
+  #include "pins_AZTEEG_X3_PRO.h"     // ATmega2560
+#elif MB(ULTIMAIN_2)
+  #include "pins_ULTIMAIN_2.h"        // ATmega2560
 #elif MB(RUMBA)
-  #include "pins_RUMBA.h"
+  #include "pins_RUMBA.h"             // ATmega2560
-#elif MB(PRINTRBOARD)
+#elif MB(BQ_ZUM_MEGA_3D)
-  #include "pins_PRINTRBOARD.h"
+  #include "pins_BQ_ZUM_MEGA_3D.h"    // ATmega2560
-#elif MB(PRINTRBOARD_REVF)
+
-  #include "pins_PRINTRBOARD_REVF.h"
+//
-#elif MB(BRAINWAVE)
+// Other ATmega1280, ATmega2560
-  #include "pins_BRAINWAVE.h"
+//
-#elif MB(BRAINWAVE_PRO)
+
-  #include "pins_BRAINWAVE_PRO.h"
+#elif MB(CNCONTROLS_11)
-#elif MB(SAV_MKI)
+  #include "pins_CNCONTROLS_11.h"     // ATmega1280, ATmega2560
-  #include "pins_SAV_MKI.h"
+#elif MB(CNCONTROLS_12)
-#elif MB(TEENSY2)
+  #include "pins_CNCONTROLS_12.h"     // ATmega1280, ATmega2560
-  #include "pins_TEENSY2.h"
+#elif MB(MIGHTYBOARD_REVE)
-#elif MB(GEN3_PLUS)
+  #include "pins_MIGHTYBOARD_REVE.h"  // ATmega1280, ATmega2560
-  #include "pins_GEN3_PLUS.h"
+#elif MB(CHEAPTRONIC)
-#elif MB(GEN3_MONOLITHIC)
+  #include "pins_CHEAPTRONIC.h"       // ATmega2560
-  #include "pins_GEN3_MONOLITHIC.h"
+#elif MB(CHEAPTRONIC_V2)
+  #include "pins_CHEAPTRONICv2.h"     // ATmega2560
 #elif MB(MEGATRONICS)
-  #include "pins_MEGATRONICS.h"
+  #include "pins_MEGATRONICS.h"       // ATmega2560
-#elif MB(MINITRONICS)
-  #include "pins_MINITRONICS.h"
 #elif MB(MEGATRONICS_2)
-  #include "pins_MEGATRONICS_2.h"
+  #include "pins_MEGATRONICS_2.h"     // ATmega2560
 #elif MB(MEGATRONICS_3)
-  #include "pins_MEGATRONICS_3.h"
+  #include "pins_MEGATRONICS_3.h"     // ATmega2560
 #elif MB(MEGATRONICS_31)
   #define MEGATRONICS_31
-  #include "pins_MEGATRONICS_3.h"
+  #include "pins_MEGATRONICS_3.h"     // ATmega2560
-#elif MB(OMCA_A)
-  #include "pins_OMCA_A.h"
-#elif MB(OMCA)
-  #include "pins_OMCA.h"
 #elif MB(RAMBO)
-  #include "pins_RAMBO.h"
+  #include "pins_RAMBO.h"             // ATmega2560
 #elif MB(MINIRAMBO)
-  #include "pins_MINIRAMBO.h"
+  #include "pins_MINIRAMBO.h"         // ATmega2560
 #elif MB(ELEFU_3)
-  #include "pins_ELEFU_3.h"
+  #include "pins_ELEFU_3.h"           // ATmega2560
-#elif MB(5DPRINT)
-  #include "pins_5DPRINT.h"
 #elif MB(LEAPFROG)
-  #include "pins_LEAPFROG.h"
+  #include "pins_LEAPFROG.h"          // ATmega1280, ATmega2560
-#elif MB(BAM_DICE)
-  #include "pins_RAMPS.h"
-#elif MB(BAM_DICE_DUE)
-  #include "pins_BAM_DICE_DUE.h"
-#elif MB(FELIX2)
-  #include "pins_FELIX2.h"
-#elif MB(MKS_BASE)
-  #include "pins_MKS_BASE.h"
-#elif MB(RIGIDBOARD)
-  #include "pins_RIGIDBOARD.h"
-#elif MB(RIGIDBOARD_V2)
-  #include "pins_RIGIDBOARD_V2.h"
 #elif MB(MEGACONTROLLER)
-  #include "pins_MEGACONTROLLER.h"
+  #include "pins_MEGACONTROLLER.h"    // ATmega2560
-#elif MB(BQ_ZUM_MEGA_3D)
-  #include "pins_BQ_ZUM_MEGA_3D.h"
 #elif MB(SCOOVO_X9H)
-  #include "pins_SCOOVO_X9H.h"
+  #include "pins_SCOOVO_X9H.h"        // ATmega2560
-#elif MB(MKS_13)
-  #include "pins_MKS_13.h"
-#elif MB(SAINSMART_2IN1)
-  #include "pins_SAINSMART_2IN1.h"
-#elif MB(ZRIB_V20)
-  #include "pins_ZRIB_V20.h"
 #elif MB(GT2560_REV_A)
-  #include "pins_GT2560_REV_A.h"
+  #include "pins_GT2560_REV_A.h"      // ATmega1280, ATmega2560
 #elif MB(GT2560_REV_A_PLUS)
-  #include "pins_GT2560_REV_A_PLUS.h"
+  #include "pins_GT2560_REV_A_PLUS.h" // ATmega1280, ATmega2560
+
+//
+// ATmega1281, ATmega2561
+//
+
+#elif MB(MINITRONICS)
+  #include "pins_MINITRONICS.h"       // ATmega1281
+
+//
+// Sanguinololu and Derivatives - ATmega644P, ATmega1284P
+//
+
+#elif MB(SANGUINOLOLU_11)
+  #include "pins_SANGUINOLOLU_11.h"   // ATmega644P, ATmega1284P
+#elif MB(SANGUINOLOLU_12)
+  #include "pins_SANGUINOLOLU_12.h"   // ATmega644P, ATmega1284P
+#elif MB(MELZI)
+  #include "pins_MELZI.h"             // ATmega644P, ATmega1284P
+#elif MB(MELZI_MAKR3D)
+  #include "pins_MELZI_MAKR3D.h"      // ATmega644P, ATmega1284P
+#elif MB(MELZI_CREALITY)
+  #include "pins_MELZI_CREALITY.h"    // ATmega644P, ATmega1284P
+#elif MB(STB_11)
+  #include "pins_STB_11.h"            // ATmega644P, ATmega1284P
+#elif MB(AZTEEG_X1)
+  #include "pins_AZTEEG_X1.h"         // ATmega644P, ATmega1284P
+
+//
+// Other ATmega644P, ATmega644, ATmega1284P
+//
+
+#elif MB(GEN3_MONOLITHIC)
+  #include "pins_GEN3_MONOLITHIC.h"   // ATmega644P
+#elif MB(GEN3_PLUS)
+  #include "pins_GEN3_PLUS.h"         // ATmega644P, ATmega1284P
+#elif MB(GEN6)
+  #include "pins_GEN6.h"              // ATmega644P, ATmega1284P
+#elif MB(GEN6_DELUXE)
+  #include "pins_GEN6_DELUXE.h"       // ATmega644P, ATmega1284P
+#elif MB(GEN7_CUSTOM)
+  #include "pins_GEN7_CUSTOM.h"       // ATmega644P, ATmega644, ATmega1284P
+#elif MB(GEN7_12)
+  #include "pins_GEN7_12.h"           // ATmega644P, ATmega644, ATmega1284P
+#elif MB(GEN7_13)
+  #include "pins_GEN7_13.h"           // ATmega644P, ATmega644, ATmega1284P
+#elif MB(GEN7_14)
+  #include "pins_GEN7_14.h"           // ATmega644P, ATmega644, ATmega1284P
+#elif MB(OMCA_A)
+  #include "pins_OMCA_A.h"            // ATmega644
+#elif MB(OMCA)
+  #include "pins_OMCA.h"              // ATmega644P, ATmega644
+#elif MB(ANET_10)
+  #include "pins_ANET_10.h"           // ATmega1284P
+#elif MB(SETHI)
+  #include "pins_SETHI.h"             // ATmega644P, ATmega644, ATmega1284P
+
+//
+// Teensyduino - AT90USB1286, AT90USB1286P
+//
+
+#elif MB(TEENSYLU)
+  #include "pins_TEENSYLU.h"          // AT90USB1286, AT90USB1286P
+#elif MB(PRINTRBOARD)
+  #include "pins_PRINTRBOARD.h"       // AT90USB1286
+#elif MB(PRINTRBOARD_REVF)
+  #include "pins_PRINTRBOARD_REVF.h"  // AT90USB1286
+#elif MB(BRAINWAVE)
+  #include "pins_BRAINWAVE.h"         // AT90USB646
+#elif MB(BRAINWAVE_PRO)
+  #include "pins_BRAINWAVE_PRO.h"     // AT90USB1286
+#elif MB(SAV_MKI)
+  #include "pins_SAV_MKI.h"           // AT90USB1286
+#elif MB(TEENSY2)
+  #include "pins_TEENSY2.h"           // AT90USB1286
+#elif MB(5DPRINT)
+  #include "pins_5DPRINT.h"           // AT90USB1286
+
 #else
   #error "Unknown MOTHERBOARD value set in Configuration.h"
 #endif

Marlin/pinsDebug.h

@@ -272,7 +272,10 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
 static void err_is_counter()     { SERIAL_PROTOCOLPGM("   non-standard PWM mode"); }
 static void err_is_interrupt()   { SERIAL_PROTOCOLPGM("   compare interrupt enabled"); }
 static void err_prob_interrupt() { SERIAL_PROTOCOLPGM("   overflow interrupt enabled"); }
-static void print_is_also_tied() { SERIAL_PROTOCOLPGM(" is also tied to this pin"); SERIAL_PROTOCOL_SP(14); }
+
+#if AVR_ATmega2560_FAMILY || AVR_AT90USB1286_FAMILY
+  static void print_is_also_tied() { SERIAL_PROTOCOLPGM(" is also tied to this pin"); SERIAL_PROTOCOL_SP(14); }
+#endif
 
 void com_print(uint8_t N, uint8_t Z) {
   const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);

Marlin/pins_AZTEEG_X1.h

@@ -26,5 +26,4 @@
 
 #define BOARD_NAME "Azteeg X1"
 
-#define SANGUINOLOLU_V_1_2
+#include "pins_SANGUINOLOLU_12.h"
-#include "pins_SANGUINOLOLU_11.h"

Marlin/pins_GEN6.h

@@ -51,10 +51,8 @@
  *
  */
 
-#ifndef __AVR_ATmega644P__
+#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
-  #ifndef __AVR_ATmega1284P__
+  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
-    #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
-  #endif
 #endif
 
 #ifndef BOARD_NAME

Marlin/pins_GT2560_REV_A_PLUS.h

@@ -26,6 +26,7 @@
 
 #include "pins_GT2560_REV_A.h"
 
+#undef BOARD_NAME
 #define BOARD_NAME  "GT2560 Rev.A+"
 
 #define SERVO0_PIN  11

Marlin/pins_MELZI.h

@@ -25,10 +25,5 @@
  */
 
 #define BOARD_NAME "Melzi"
-
+#define IS_MELZI
-#ifdef __AVR_ATmega1284P__
+#include "pins_SANGUINOLOLU_12.h"
-  #define LARGE_FLASH true
-#endif
-
-#define SANGUINOLOLU_V_1_2
-#include "pins_SANGUINOLOLU_11.h"

Marlin/pins_MELZI_CREALITY.h

@@ -25,17 +25,12 @@
  */
 
 #define BOARD_NAME "Melzi (Creality)"
-
+#define IS_MELZI
-#ifdef __AVR_ATmega1284P__
+#include "pins_SANGUINOLOLU_12.h"
-  #define LARGE_FLASH true
-#endif
 
 // For the stock CR-10 use the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 //   option for the display in Configuration.h
 
-#define SANGUINOLOLU_V_1_2
-#include "pins_SANGUINOLOLU_11.h"
-
 #undef LCD_SDSS
 #undef LED_PIN
 

Marlin/pins_MELZI_MAKR3D.h

@@ -25,10 +25,5 @@
  */
 
 #define BOARD_NAME "Melzi (ATmega1284)"
-
+#define IS_MELZI
-#ifdef __AVR_ATmega1284P__
+#include "pins_SANGUINOLOLU_12.h"
-  #define LARGE_FLASH true
-#endif
-
-#define SANGUINOLOLU_V_1_2
-#include "pins_SANGUINOLOLU_11.h"

Marlin/pins_SANGUINOLOLU_11.h

@@ -59,7 +59,9 @@
   #define BOARD_NAME "Sanguinololu <1.2"
 #endif
 
-#define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D) || MB(MELZI_CREALITY))
+#ifdef __AVR_ATmega1284P__
+  #define LARGE_FLASH true
+#endif
 
 //
 // Limit Switches
@@ -116,7 +118,7 @@
 
 #endif
 
-#if MB(AZTEEG_X1) || MB(STB_11) || IS_MELZI
+#if MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI)
   #define FAN_PIN           4 // Works for Panelolu2 too
 #endif
 
@@ -133,16 +135,25 @@
 //#define SDSS               24
 #define SDSS               31
 
-#if IS_MELZI
+#if ENABLED(IS_MELZI)
-  #define LED_PIN           27
+  #define LED_PIN          27
 #elif MB(STB_11)
   #define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
 #endif
 
 #if DISABLED(SPINDLE_LASER_ENABLE) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL))  // try to use IO Header
-  #define CASE_LIGHT_PIN         4   // MUST BE HARDWARE PWM  - see if IO Header is available
+  #define CASE_LIGHT_PIN     4 // MUST BE HARDWARE PWM  - see if IO Header is available
 #endif
 
+/**
+ * Sanguinololu 1.4 AUX pins:
+ *
+ *           PWM  TX1  RX1  SDA  SCL
+ *  12V  5V  D12  D11  D10  D17  D16
+ *  GND GND  D31  D30  D29  D28  D27
+ *            A4   A3   A2   A1   A0
+ */
+
 //
 // LCD / Controller
 //
@@ -152,7 +163,7 @@
 
     #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
 
-      #if IS_MELZI // Melzi board
+      #if ENABLED(IS_MELZI)
         #define LCD_PINS_RS     30 // CS chip select /SS chip slave select
         #define LCD_PINS_ENABLE 29 // SID (MOSI)
         #define LCD_PINS_D4     17 // SCK (CLK) clock
@@ -160,7 +171,7 @@
         // Marlin so this can be used for BEEPER_PIN. You can use this pin
         // with M42 instead of BEEPER_PIN.
         #define BEEPER_PIN      27
-      #else        // Sanguinololu 1.3
+      #else        // Sanguinololu >=1.3
         #define LCD_PINS_RS      4
         #define LCD_PINS_ENABLE 17
         #define LCD_PINS_D4     30
@@ -210,7 +221,7 @@
 
   #if ENABLED(LCD_I2C_PANELOLU2)
 
-    #if IS_MELZI
+    #if ENABLED(IS_MELZI)
       #define BTN_ENC           29
       #define LCD_SDSS          30 // Panelolu2 SD card reader rather than the Melzi
     #else
@@ -280,7 +291,7 @@
      *                                   MS3  O|     |O  2A
      *                                /RESET  O|     |O  1A
      *                                /SLEEP  O|     |O  1B
-     *  SPINDLE_LASER_PWM_PIN  STEP  O|     |O  VDD
+     *  SPINDLE_LASER_PWM_PIN           STEP  O|     |O  VDD
      *  SPINDLE_LASER_ENABLE_PIN         DIR  O|     |O  GND
      *                                         -------
      *

Marlin/pins_SANGUINOLOLU_12.h

@@ -27,15 +27,14 @@
  *
  *  AZTEEG_X1
  *  MELZI
+ *  MELZI_CREALITY
  *  MELZI_MAKR3D
  *  SANGUINOLOLU_12
  *  STB_11
  */
 
-#define BOARD_NAME "Sanguinololu 1.2"
+#ifndef BOARD_NAME
-
+  #define BOARD_NAME "Sanguinololu 1.2"
-#ifdef __AVR_ATmega1284P__
-  #define LARGE_FLASH true
 #endif
 
 #define SANGUINOLOLU_V_1_2

Marlin/pins_STB_11.h

@@ -25,10 +25,4 @@
  */
 
 #define BOARD_NAME "STB V1.1"
-
+#include "pins_SANGUINOLOLU_12.h"
-#ifdef __AVR_ATmega1284P__
-  #define LARGE_FLASH true
-#endif
-
-#define SANGUINOLOLU_V_1_2
-#include "pins_SANGUINOLOLU_11.h"

Marlin/temperature.cpp

@@ -1559,7 +1559,7 @@ void Temperature::set_current_temp_raw() {
 
     if (endstop_change) {
       #if HAS_X_MIN
-        if (TEST(endstop_change, X_MIN)) SERIAL_PROTOCOLPAIR("X_MIN:", !!TEST(current_endstop_bits_local, X_MIN));
+        if (TEST(endstop_change, X_MIN)) SERIAL_PROTOCOLPAIR("  X_MIN:", !!TEST(current_endstop_bits_local, X_MIN));
       #endif
       #if HAS_X_MAX
         if (TEST(endstop_change, X_MAX)) SERIAL_PROTOCOLPAIR("  X_MAX:", !!TEST(current_endstop_bits_local, X_MAX));

platformio.ini

@@ -74,3 +74,9 @@ framework = arduino
 board = sanguino_atmega1284p
 upload_speed = 57600
 lib_deps = ${common.lib_deps}
+
+[env:sanguino_atmega644p]
+platform = atmelavr
+framework = arduino
+board = sanguino_atmega644p
+lib_deps = ${common.lib_deps}