From dcde2021573de5ec62dae9e8ced26bf6157ede5e Mon Sep 17 00:00:00 2001 From: Bob-the-Kuhn Date: Sun, 30 Apr 2017 15:51:58 -0500 Subject: [PATCH] Add startup notice & update host temperatures while waiting Right now G26 doesn't send a notice to the host that it's running. It's not until the heaters are at temperature that you know for sure if it's running or not. Added host temperature prints so that someone watching the host interface will see the temperatures change during the warm up period. Updates are sent every 5 seconds. --- Marlin/G26_Mesh_Validation_Tool.cpp | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Marlin/G26_Mesh_Validation_Tool.cpp b/Marlin/G26_Mesh_Validation_Tool.cpp index acac6e0873..409dd32973 100755 --- a/Marlin/G26_Mesh_Validation_Tool.cpp +++ b/Marlin/G26_Mesh_Validation_Tool.cpp @@ -178,6 +178,7 @@ * nozzle in a problem area and doing a G29 P4 R command. */ void gcode_G26() { + SERIAL_ECHOLNPGM("G26 command started. Waiting on heater(s)."); float tmp, start_angle, end_angle; int i, xi, yi; mesh_index_pair location; @@ -765,6 +766,7 @@ * wait for them to get up to temperature. */ bool turn_on_heaters() { + millis_t next; #if HAS_TEMP_BED #if ENABLED(ULTRA_LCD) if (bed_temp > 25) { @@ -773,8 +775,13 @@ #endif ubl.has_control_of_lcd_panel = true; thermalManager.setTargetBed(bed_temp); + next = millis() + 5000; while (abs(thermalManager.degBed() - bed_temp) > 3) { if (ubl_lcd_clicked()) return exit_from_g26(); + if (millis() > next) { + next = millis() + 5000; + print_heaterstates(); + } idle(); } #if ENABLED(ULTRA_LCD) @@ -788,6 +795,10 @@ thermalManager.setTargetHotend(hotend_temp, 0); while (abs(thermalManager.degHotend(0) - hotend_temp) > 3) { if (ubl_lcd_clicked()) return exit_from_g26(); + if (millis() > next) { + next = millis() + 5000; + print_heaterstates(); + } idle(); }