diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index da00209012..ce9f86d9c9 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/Marlin/src/gcode/calibrate/G34_M422.cpp b/Marlin/src/gcode/calibrate/G34_M422.cpp
index 1f7339679a..af0b096795 100644
--- a/Marlin/src/gcode/calibrate/G34_M422.cpp
+++ b/Marlin/src/gcode/calibrate/G34_M422.cpp
@@ -45,22 +45,49 @@
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
 #include "../../core/debug_out.h"
 
-// Sanity-check the count of Z_STEPPER_ALIGN_XY points
-constexpr xy_pos_t sanity_arr_z_align[] = Z_STEPPER_ALIGN_XY;
+//
+// Sanity check G34 / M422 settings
+//
+constexpr xy_pos_t test_z_stepper_align_xy[] = Z_STEPPER_ALIGN_XY;
+
 #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-  static_assert(COUNT(sanity_arr_z_align) >= Z_STEPPER_COUNT,
+
+  static_assert(COUNT(test_z_stepper_align_xy) >= Z_STEPPER_COUNT,
     "Z_STEPPER_ALIGN_XY requires at least three {X,Y} entries (Z, Z2, Z3, ...)."
   );
+
+  constexpr float test_z_stepper_align_stepper_xy[][XY] = Z_STEPPER_ALIGN_STEPPER_XY;
+  static_assert(
+    COUNT(test_z_stepper_align_stepper_xy) == Z_STEPPER_COUNT,
+    "Z_STEPPER_ALIGN_STEPPER_XY requires three {X,Y} entries (one per Z stepper)."
+  );
+
 #else
-  static_assert(COUNT(sanity_arr_z_align) == Z_STEPPER_COUNT,
+
+  static_assert(COUNT(test_z_stepper_align_xy) == Z_STEPPER_COUNT,
     #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
       "Z_STEPPER_ALIGN_XY requires three {X,Y} entries (Z, Z2, and Z3)."
     #else
       "Z_STEPPER_ALIGN_XY requires two {X,Y} entries (Z and Z2)."
     #endif
   );
+
 #endif
 
+constexpr xyz_pos_t dpo = NOZZLE_TO_PROBE_OFFSET;
+
+#define LTEST(N) (test_z_stepper_align_xy[N].x >= _MAX(X_MIN_BED + MIN_PROBE_EDGE_LEFT,  X_MIN_POS + dpo.x) - 0.00001f)
+#define RTEST(N) (test_z_stepper_align_xy[N].x <= _MIN(X_MAX_BED - MIN_PROBE_EDGE_RIGHT, X_MAX_POS + dpo.x) + 0.00001f)
+#define FTEST(N) (test_z_stepper_align_xy[N].y >= _MAX(Y_MIN_BED + MIN_PROBE_EDGE_FRONT, Y_MIN_POS + dpo.y) - 0.00001f)
+#define BTEST(N) (test_z_stepper_align_xy[N].y <= _MIN(Y_MAX_BED - MIN_PROBE_EDGE_BACK,  Y_MAX_POS + dpo.y) + 0.00001f)
+
+static_assert(LTEST(0) && RTEST(0), "The 1st Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset.");
+static_assert(FTEST(0) && BTEST(0), "The 1st Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset.");
+static_assert(LTEST(1) && RTEST(1), "The 2nd Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset.");
+static_assert(FTEST(1) && BTEST(1), "The 2nd Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset.");
+static_assert(LTEST(2) && RTEST(2), "The 3rd Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset.");
+static_assert(FTEST(2) && BTEST(2), "The 3rd Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset.");
+
 //
 // G34 / M422 shared data
 //
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index d1e1e52b99..9a695918ab 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -2353,24 +2353,13 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 #endif
 
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
-
   #if !Z_MULTI_STEPPER_DRIVERS
     #error "Z_STEPPER_AUTO_ALIGN requires Z_DUAL_STEPPER_DRIVERS or Z_TRIPLE_STEPPER_DRIVERS."
   #elif !HAS_BED_PROBE
     #error "Z_STEPPER_AUTO_ALIGN requires a Z-bed probe."
+  #elif ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) && DISABLED(Z_TRIPLE_STEPPER_DRIVERS)
+    #error "Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS requires Z_TRIPLE_STEPPER_DRIVERS."
   #endif
-
-  #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-    #if DISABLED(Z_TRIPLE_STEPPER_DRIVERS)
-      #error "Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS requires Z_TRIPLE_STEPPER_DRIVERS."
-    #endif
-    constexpr float sanity_arr_screw_xy[][2] = Z_STEPPER_ALIGN_STEPPER_XY;
-    static_assert(
-      COUNT(sanity_arr_screw_xy) == Z_STEPPER_COUNT,
-      "Z_STEPPER_ALIGN_STEPPER_XY requires three {X,Y} entries (one per Z stepper)."
-    );
-  #endif
-
 #endif
 
 #if ENABLED(PRINTCOUNTER) && DISABLED(EEPROM_SETTINGS)
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index da00209012..ce9f86d9c9 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 29567f4e7b..674a13f490 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
index e6afef16a2..bc27457939 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index 2f7699618a..bccec6c997 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 9655ea4ca8..93e291107f 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
index 702e3b64f0..890d4bc16d 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -657,7 +657,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index 9a7b9d5c8f..53e3bd4cb3 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 6d85a49896..78874d0a92 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 46e0b32f60..14f83217f1 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 46e0b32f60..14f83217f1 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index e795fd9d8a..d4770d88ea 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 0aa0ae102a..bf55c3eb14 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 54aa0fa6d8..319dae2c09 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index c35f2bb179..9afd583a54 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 0e82c07f2a..88bd010c3a 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index c3ad42cf69..5d0e348969 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -660,7 +660,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index fda8740b97..efc5194cac 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index cf4eb071a7..3d1947eb5c 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 514688d5c2..492855d090 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 68e6cc60d7..315b72c13b 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 514688d5c2..492855d090 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h
index ed3069a8d5..ae968b1f09 100644
--- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h
index 9c4d683c6e..5bdc376ff0 100644
--- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h	
+++ b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 0173c63567..caa588cec3 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index d2b8554fbe..3a81d40aaf 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 6126682bcd..f0397aa017 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index ba65980f60..60975c2b35 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index 356d349a61..c4629cbe95 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index c7d0cf9d4c..6bbb09044f 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index 2bc4a9cee7..98a49ec1cf 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index bc5523c9b6..e5799f1ac7 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index c1b2893143..9adb2de206 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 7c320151d7..3542e0a6bb 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 88025d9b27..a793b06579 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h
index 03f7ae411a..13dd89d365 100644
--- a/config/examples/Creality/Ender-5/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index bbe63bc717..548429f750 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 9e2a11163d..f5f49b7946 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
index ae51a062a3..0f05eeadf0 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 545da02988..2ce66b263d 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index fe842b23aa..b96a9395c1 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
index d8d9a0046b..7868f8dc72 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
index d8d9a0046b..7868f8dc72 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
index d8d9a0046b..7868f8dc72 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
index d8d9a0046b..7868f8dc72 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index 6972c89e36..5a97ad6a9b 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h
index da00209012..ce9f86d9c9 100644
--- a/config/examples/FYSETC/S6/Configuration_adv.h
+++ b/config/examples/FYSETC/S6/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h
index 75c43394a6..610c6d9647 100644
--- a/config/examples/Felix/DUAL/Configuration_adv.h
+++ b/config/examples/Felix/DUAL/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h
index 75c43394a6..610c6d9647 100644
--- a/config/examples/Felix/Single/Configuration_adv.h
+++ b/config/examples/Felix/Single/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 41afc348ef..aa09ec4910 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 701491c328..7050f34e45 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 6ab0227142..365c8c6950 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 9faa9003b9..c313994023 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -660,7 +660,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index c1f6ea4fd6..000b1c258e 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -660,7 +660,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index ed289e06b1..bc2a7b6220 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h
index b4d2836fd4..2abd8a6929 100644
--- a/config/examples/Geeetech/A10D/Configuration_adv.h
+++ b/config/examples/Geeetech/A10D/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 6db75d1cf8..4ad8ffce2d 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h
index 6db75d1cf8..4ad8ffce2d 100644
--- a/config/examples/Geeetech/A10T/Configuration_adv.h
+++ b/config/examples/Geeetech/A10T/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h
index 0e117405ed..f98b79ac33 100644
--- a/config/examples/Geeetech/A20/Configuration_adv.h
+++ b/config/examples/Geeetech/A20/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 0e117405ed..f98b79ac33 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h
index 0e117405ed..f98b79ac33 100644
--- a/config/examples/Geeetech/A20T/Configuration_adv.h
+++ b/config/examples/Geeetech/A20T/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h
index a4257e5248..d02483edc5 100644
--- a/config/examples/Geeetech/A30/Configuration_adv.h
+++ b/config/examples/Geeetech/A30/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h
index a4257e5248..d02483edc5 100644
--- a/config/examples/Geeetech/E180/Configuration_adv.h
+++ b/config/examples/Geeetech/E180/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 54f6161a43..f2da23ad4e 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h
index 9bd66da9b4..048a9d35f8 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index ed289e06b1..bc2a7b6220 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index ed289e06b1..bc2a7b6220 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index f4d9d3c0e1..10bd599061 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -648,7 +648,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 650e0cda43..61534ad0da 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index f3366d33ae..f5c3d13492 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -661,7 +661,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 9af88da082..4f2cd7b802 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index f3366d33ae..f5c3d13492 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -661,7 +661,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 0eec6b5372..e294b35a13 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 30911ae430..94f5b1846e 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index daeb52b880..8b011a82d2 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -658,7 +658,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index e475887e48..70c87b5641 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index c331b85bc0..9479285102 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 7b34655886..f5df42b917 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h
index cd73548cda..56b110ff64 100644
--- a/config/examples/Modix/Big60/Configuration_adv.h
+++ b/config/examples/Modix/Big60/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 9e24c92a78..733c4d257a 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h
index 7fade87677..1dc54df21c 100644
--- a/config/examples/Renkforce/RF100/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h
index 7fade87677..1dc54df21c 100644
--- a/config/examples/Renkforce/RF100XL/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h
index 7fade87677..1dc54df21c 100644
--- a/config/examples/Renkforce/RF100v2/Configuration_adv.h
+++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index df7c45cb14..558013f5b2 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h
index 8e6c7b337a..4cea497a27 100644
--- a/config/examples/SCARA/Morgan/Configuration_adv.h
+++ b/config/examples/SCARA/Morgan/Configuration_adv.h
@@ -653,7 +653,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 8afcd4ec6c..c8b7e3f8f6 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 886f203e4b..60afdab394 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 54d8bf3e65..c3518b1e20 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 4a071c7cda..8e6a107a1f 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index 70aaebdfc5..728e879589 100755
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index 70aaebdfc5..728e879589 100755
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index ef9d14cf16..23031498d3 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 6e886516a5..a5f8d794d7 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index ef71105b15..f1071e5658 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index e4433ddf00..8e49b0974c 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 8f896a49d7..3c6e8fd57c 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 39ad47fd67..02db33889a 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 33ce34ea9b..dafbe8453f 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index d59df21f08..fe5f102b29 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -669,7 +669,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
index 79a2633df9..f3b6be84df 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
index 79a2633df9..f3b6be84df 100644
--- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 2d046bff59..d8cfe4c602 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 6a941729a8..3e1650a0a5 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h
index 6e76d1bbd9..d16cd279da 100644
--- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index 48f9b6c61f..a24eea6fe4 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 7f307177da..d8d4dd5dac 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index 6da51ce318..cf5fe7fb81 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index 123b17593a..16d154d35b 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
index 833fa92204..f79808f93d 100644
--- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 8e595b0221..e04890fb92 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 8e595b0221..e04890fb92 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index e845a3eae2..c1a15225e4 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index a6f858a044..da252103f7 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 769ef13f31..5314c0c4c8 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 2e7bc1790e..a1bfced08f 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index e845a3eae2..c1a15225e4 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index e845a3eae2..c1a15225e4 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 9db572042e..3d03dcad59 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 6b26885872..0dcb512338 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 79ad5222e1..c2f29689ea 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index c62c717449..6e9d57caf4 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 4af852d18a..72d04bbdf9 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.