Move macros, add ENABLED/DISABLED, add includes

Marlin/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/Marlin.h

@@ -28,14 +28,6 @@
 
 #include "Arduino.h"
 
-#define BIT(b) (1<<(b))
-#define TEST(n,b) (((n)&BIT(b))!=0)
-#define SET_BIT(n,b,value) (n) ^= ((-value)^(n)) & (BIT(b))
-#define RADIANS(d) ((d)*M_PI/180.0)
-#define DEGREES(r) ((r)*180.0/M_PI)
-#define NOLESS(v,n) do{ if (v < n) v = n; }while(0)
-#define NOMORE(v,n) do{ if (v > n) v = n; }while(0)
-
 typedef unsigned long millis_t;
 
 // Arduino < 1.0.0 does not define this, so we need to do it ourselves

Marlin/configurator/config/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/Felix/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/Felix/Configuration_DUAL.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/Hephestos/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/K8200/Configuration.h

@@ -7,6 +7,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/RigidBot/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/SCARA/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/WITBOX/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/delta/generic/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -6,6 +6,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/makibox/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -2,6 +2,7 @@
 #define CONFIGURATION_H
 
 #include "boards.h"
+#include "macros.h"
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/macros.h

@@ -0,0 +1,25 @@
+#ifndef MACROS_H
+#define MACROS_H
+
+// Macros for bit masks
+#define BIT(b) (1<<(b))
+#define TEST(n,b) (((n)&BIT(b))!=0)
+#define SET_BIT(n,b,value) (n) ^= ((-value)^(n)) & (BIT(b))
+
+// Macros for maths shortcuts
+#define RADIANS(d) ((d)*M_PI/180.0)
+#define DEGREES(r) ((r)*180.0/M_PI)
+
+// Macros to contrain values
+#define NOLESS(v,n) do{ if (v < n) v = n; }while(0)
+#define NOMORE(v,n) do{ if (v > n) v = n; }while(0)
+
+// Macros to support option testing
+#define _CAT(a, ...) a ## __VA_ARGS__
+#define SWITCH_ENABLED_0 0
+#define SWITCH_ENABLED_1 1
+#define SWITCH_ENABLED_  1
+#define ENABLED(b) _CAT(SWITCH_ENABLED_, b)
+#define DISABLED(b) (!_CAT(SWITCH_ENABLED_, b))
+
+#endif //__MACROS_H

Marlin/stepper_indirection.h

@@ -22,6 +22,8 @@
 #ifndef STEPPER_INDIRECTION_H
 #define STEPPER_INDIRECTION_H
 
+#include "macros.h"
+
 // X motor
 #define X_STEP_INIT SET_OUTPUT(X_STEP_PIN)
 #define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE)