diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index 00854ac2c4..dbeb4e2939 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -170,14 +170,13 @@ uint8_t axis_homed, axis_known_position; // = 0 #endif #if FAN_COUNT > 0 - int16_t fanSpeeds[FAN_COUNT] = { 0 }; + uint8_t fan_speed[FAN_COUNT] = { 0 }; #if ENABLED(EXTRA_FAN_SPEED) - int16_t old_fanSpeeds[FAN_COUNT], - new_fanSpeeds[FAN_COUNT]; + uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT]; #endif #if ENABLED(PROBING_FANS_OFF) bool fans_paused; // = false; - int16_t paused_fanSpeeds[FAN_COUNT] = { 0 }; + uint8_t paused_fan_speed[FAN_COUNT] = { 0 }; #endif #endif @@ -972,7 +971,7 @@ void loop() { print_job_timer.stop(); thermalManager.disable_all_heaters(); #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + for (uint8_t i = 0; i < FAN_COUNT; i++) fan_speed[i] = 0; #endif wait_for_heatup = false; #if ENABLED(POWER_LOSS_RECOVERY) diff --git a/Marlin/src/Marlin.h b/Marlin/src/Marlin.h index 0bad8db303..6e925f90ce 100644 --- a/Marlin/src/Marlin.h +++ b/Marlin/src/Marlin.h @@ -208,19 +208,18 @@ extern volatile bool wait_for_heatup; extern millis_t max_inactive_time, stepper_inactive_time; #if FAN_COUNT > 0 - extern int16_t fanSpeeds[FAN_COUNT]; + extern uint8_t fan_speed[FAN_COUNT]; #if ENABLED(EXTRA_FAN_SPEED) - extern int16_t old_fanSpeeds[FAN_COUNT], - new_fanSpeeds[FAN_COUNT]; + extern uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT]; #endif #if ENABLED(PROBING_FANS_OFF) extern bool fans_paused; - extern int16_t paused_fanSpeeds[FAN_COUNT]; + extern uint8_t paused_fan_speed[FAN_COUNT]; #endif #endif #if ENABLED(USE_CONTROLLER_FAN) - extern uint8_t controllerFanSpeed; + extern uint8_t controllerfan_speed; #endif #if HAS_POWER_SWITCH diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp index 1dec32647e..7ee6671332 100644 --- a/Marlin/src/feature/controllerfan.cpp +++ b/Marlin/src/feature/controllerfan.cpp @@ -27,7 +27,7 @@ #include "../module/stepper_indirection.h" #include "../module/temperature.h" -uint8_t controllerFanSpeed; +uint8_t controllerfan_speed; void controllerfan_update() { static millis_t lastMotorOn = 0, // Last time a motor was turned on @@ -75,7 +75,7 @@ void controllerfan_update() { // Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds uint8_t speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : CONTROLLERFAN_SPEED; - controllerFanSpeed = speed; + controllerfan_speed = speed; // allows digital or PWM fan output to be used (see M42 handling) WRITE(CONTROLLER_FAN_PIN, speed); diff --git a/Marlin/src/feature/power.cpp b/Marlin/src/feature/power.cpp index 6c196fd6f3..24f02041b2 100644 --- a/Marlin/src/feature/power.cpp +++ b/Marlin/src/feature/power.cpp @@ -39,15 +39,15 @@ millis_t Power::lastPowerOn; bool Power::is_power_needed() { #if ENABLED(AUTO_POWER_FANS) - for (uint8_t i = 0; i < FAN_COUNT; i++) if (fanSpeeds[i] > 0) return true; + for (uint8_t i = 0; i < FAN_COUNT; i++) if (fan_speed[i]) return true; #endif #if ENABLED(AUTO_POWER_E_FANS) - HOTEND_LOOP() if (thermalManager.autofan_speed[e] > 0) return true; + HOTEND_LOOP() if (thermalManager.autofan_speed[e]) return true; #endif #if ENABLED(AUTO_POWER_CONTROLLERFAN) && HAS_CONTROLLER_FAN && ENABLED(USE_CONTROLLER_FAN) - if (controllerFanSpeed > 0) return true; + if (controllerfan_speed) return true; #endif // If any of the drivers or the bed are enabled... diff --git a/Marlin/src/feature/power_loss_recovery.cpp b/Marlin/src/feature/power_loss_recovery.cpp index 6613c0adf6..10e8246670 100644 --- a/Marlin/src/feature/power_loss_recovery.cpp +++ b/Marlin/src/feature/power_loss_recovery.cpp @@ -82,9 +82,9 @@ extern uint8_t commands_in_queue, cmd_queue_index_r; #endif #if FAN_COUNT - SERIAL_PROTOCOLPGM("fanSpeeds: "); + SERIAL_PROTOCOLPGM("fan_speed: "); for (int8_t i = 0; i < FAN_COUNT; i++) { - SERIAL_PROTOCOL(job_recovery_info.fanSpeeds[i]); + SERIAL_PROTOCOL(job_recovery_info.fan_speed[i]); if (i < FAN_COUNT - 1) SERIAL_CHAR(','); } SERIAL_EOL(); @@ -264,7 +264,7 @@ void save_job_recovery_info() { #endif #if FAN_COUNT - COPY(job_recovery_info.fanSpeeds, fanSpeeds); + COPY(job_recovery_info.fan_speed, fan_speed); #endif #if HAS_LEVELING diff --git a/Marlin/src/feature/power_loss_recovery.h b/Marlin/src/feature/power_loss_recovery.h index 24b0891a02..04b011be15 100644 --- a/Marlin/src/feature/power_loss_recovery.h +++ b/Marlin/src/feature/power_loss_recovery.h @@ -52,7 +52,7 @@ typedef struct { #endif #if FAN_COUNT - int16_t fanSpeeds[FAN_COUNT]; + uint8_t fan_speed[FAN_COUNT]; #endif #if HAS_LEVELING diff --git a/Marlin/src/gcode/control/M42.cpp b/Marlin/src/gcode/control/M42.cpp index 6e84dc475f..2a7323a861 100644 --- a/Marlin/src/gcode/control/M42.cpp +++ b/Marlin/src/gcode/control/M42.cpp @@ -52,13 +52,13 @@ void GcodeSuite::M42() { #if FAN_COUNT > 0 switch (pin) { #if HAS_FAN0 - case FAN_PIN: fanSpeeds[0] = pin_status; break; + case FAN_PIN: fan_speed[0] = pin_status; break; #endif #if HAS_FAN1 - case FAN1_PIN: fanSpeeds[1] = pin_status; break; + case FAN1_PIN: fan_speed[1] = pin_status; break; #endif #if HAS_FAN2 - case FAN2_PIN: fanSpeeds[2] = pin_status; break; + case FAN2_PIN: fan_speed[2] = pin_status; break; #endif } #endif diff --git a/Marlin/src/gcode/control/M80_M81.cpp b/Marlin/src/gcode/control/M80_M81.cpp index 4047049f54..eeda53bfdd 100644 --- a/Marlin/src/gcode/control/M80_M81.cpp +++ b/Marlin/src/gcode/control/M80_M81.cpp @@ -98,10 +98,10 @@ void GcodeSuite::M81() { planner.finish_and_disable(); #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + for (uint8_t i = 0; i < FAN_COUNT; i++) fan_speed[i] = 0; #if ENABLED(PROBING_FANS_OFF) fans_paused = false; - ZERO(paused_fanSpeeds); + ZERO(paused_fan_speed); #endif #endif diff --git a/Marlin/src/gcode/lcd/M145.cpp b/Marlin/src/gcode/lcd/M145.cpp index 3fda5bb047..c65a281b81 100644 --- a/Marlin/src/gcode/lcd/M145.cpp +++ b/Marlin/src/gcode/lcd/M145.cpp @@ -49,7 +49,7 @@ void GcodeSuite::M145() { } if (parser.seenval('F')) { v = parser.value_int(); - lcd_preheat_fan_speed[material] = constrain(v, 0, 255); + lcd_preheat_fan_speed[material] = (uint8_t)constrain(v, 0, 255); } #if TEMP_SENSOR_BED != 0 if (parser.seenval('B')) { diff --git a/Marlin/src/gcode/parser.h b/Marlin/src/gcode/parser.h index b6044b216e..d70c286204 100644 --- a/Marlin/src/gcode/parser.h +++ b/Marlin/src/gcode/parser.h @@ -325,8 +325,8 @@ public: FORCE_INLINE static uint16_t ushortval(const char c, const uint16_t dval=0) { return seenval(c) ? value_ushort() : dval; } FORCE_INLINE static int32_t longval(const char c, const int32_t dval=0) { return seenval(c) ? value_long() : dval; } FORCE_INLINE static uint32_t ulongval(const char c, const uint32_t dval=0) { return seenval(c) ? value_ulong() : dval; } - FORCE_INLINE static float linearval(const char c, const float dval=0) { return seenval(c) ? value_linear_units() : dval; } - FORCE_INLINE static float celsiusval(const char c, const float dval=0){ return seenval(c) ? value_celsius() : dval; } + FORCE_INLINE static float linearval(const char c, const float dval=0) { return seenval(c) ? value_linear_units() : dval; } + FORCE_INLINE static float celsiusval(const char c, const float dval=0) { return seenval(c) ? value_celsius() : dval; } }; diff --git a/Marlin/src/gcode/temperature/M106_M107.cpp b/Marlin/src/gcode/temperature/M106_M107.cpp index b8bdc03d61..8fe50940f2 100644 --- a/Marlin/src/gcode/temperature/M106_M107.cpp +++ b/Marlin/src/gcode/temperature/M106_M107.cpp @@ -25,7 +25,7 @@ #if FAN_COUNT > 0 #include "../gcode.h" -#include "../../Marlin.h" // for fanSpeeds — should move those to Planner +#include "../../Marlin.h" // for fan_speed — should move those to Planner /** * M106: Set Fan Speed @@ -48,21 +48,22 @@ void GcodeSuite::M106() { if (t > 0) { switch (t) { case 1: - fanSpeeds[p] = old_fanSpeeds[p]; + fan_speed[p] = old_fan_speed[p]; break; case 2: - old_fanSpeeds[p] = fanSpeeds[p]; - fanSpeeds[p] = new_fanSpeeds[p]; + old_fan_speed[p] = fan_speed[p]; + fan_speed[p] = new_fan_speed[p]; break; default: - new_fanSpeeds[p] = MIN(t, 255); + new_fan_speed[p] = MIN(t, 255); break; } return; + } #endif // EXTRA_FAN_SPEED const uint16_t s = parser.ushortval('S', 255); - fanSpeeds[p] = MIN(s, 255U); + fan_speed[p] = MIN(s, 255U); } } @@ -71,7 +72,7 @@ void GcodeSuite::M106() { */ void GcodeSuite::M107() { const uint16_t p = parser.ushortval('P'); - if (p < FAN_COUNT) fanSpeeds[p] = 0; + if (p < FAN_COUNT) fan_speed[p] = 0; } #endif // FAN_COUNT > 0 diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.h b/Marlin/src/lcd/dogm/status_screen_DOGM.h index d8d8b252d8..c80c2da4be 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.h +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.h @@ -207,7 +207,7 @@ static void lcd_implementation_status_screen() { static uint8_t fan_frame; if (old_blink != blink) { old_blink = blink; - if (!fanSpeeds[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0; + if (!fan_speed[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0; } #endif @@ -245,7 +245,7 @@ static void lcd_implementation_status_screen() { fan_frame == 3 ? status_screen3_bmp : #endif #else - blink && fanSpeeds[0] ? status_screen1_bmp : + blink && fan_speed[0] ? status_screen1_bmp : #endif #endif status_screen0_bmp @@ -269,7 +269,7 @@ static void lcd_implementation_status_screen() { #if HAS_FAN0 if (PAGE_CONTAINS(STATUS_SCREEN_FAN_TEXT_Y - 7, STATUS_SCREEN_FAN_TEXT_Y)) { // Fan - const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256; + const uint16_t per = (((uint16_t)fan_speed[0] + 1) * 100) / 256; if (per) { lcd_moveto(STATUS_SCREEN_FAN_TEXT_X, STATUS_SCREEN_FAN_TEXT_Y); lcd_put_u8str(itostr3(per)); diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h index 28991a7c01..6b9baca3a5 100644 --- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h @@ -710,7 +710,7 @@ bool ST7920_Lite_Status_Screen::indicators_changed() { // them only during blinks we gain a bit of stability. const bool blink = lcd_blink(); const uint16_t feedrate_perc = feedrate_percentage; - const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; + const uint8_t fs = (((uint16_t)fan_speed[0] + 1) * 100) / 256; const int16_t extruder_1_target = thermalManager.degTargetHotend(0); #if HOTENDS > 1 const int16_t extruder_2_target = thermalManager.degTargetHotend(1); @@ -719,7 +719,7 @@ bool ST7920_Lite_Status_Screen::indicators_changed() { const int16_t bed_target = thermalManager.degTargetBed(); #endif static uint16_t last_checksum = 0; - const uint16_t checksum = blink ^ feedrate_perc ^ fan_speed ^ extruder_1_target + const uint16_t checksum = blink ^ feedrate_perc ^ fs ^ extruder_1_target #if HOTENDS > 1 ^ extruder_2_target #endif @@ -737,7 +737,7 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { const bool blink = lcd_blink(); const duration_t elapsed = print_job_timer.duration(); const uint16_t feedrate_perc = feedrate_percentage; - const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; + const uint8_t fs = (((uint16_t)fan_speed[0] + 1) * 100) / 256; const int16_t extruder_1_temp = thermalManager.degHotend(0), extruder_1_target = thermalManager.degTargetHotend(0); #if HOTENDS > 1 @@ -756,12 +756,12 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { #if HAS_HEATED_BED draw_bed_temp(bed_temp, bed_target, forceUpdate); #endif - draw_fan_speed(fan_speed); + draw_fan_speed(fs); draw_print_time(elapsed); draw_feedrate_percentage(feedrate_perc); // Update the fan and bed animations - if (fan_speed > 0) draw_fan_icon(blink); + if (fs) draw_fan_icon(blink); #if HAS_HEATED_BED if (bed_target > 0) draw_heat_icon(blink, true); diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp index 86a9fd110b..bef53879f6 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp @@ -85,7 +85,7 @@ static const uint8_t u8g_dev_st7920_128x64_HAL_init_seq[] PROGMEM = { U8G_ESC_END // end of sequence }; -void clear_graphics_DRAM(u8g_t *u8g, u8g_dev_t *dev){ +void clear_graphics_DRAM(u8g_t *u8g, u8g_dev_t *dev) { u8g_SetChipSelect(u8g, dev, 1); u8g_Delay(1); u8g_SetAddress(u8g, dev, 0); // cmd mode diff --git a/Marlin/src/lcd/malyanlcd.cpp b/Marlin/src/lcd/malyanlcd.cpp index 904fd6ded5..3af38a8101 100644 --- a/Marlin/src/lcd/malyanlcd.cpp +++ b/Marlin/src/lcd/malyanlcd.cpp @@ -255,7 +255,7 @@ void process_lcd_p_command(const char* command) { print_job_timer.stop(); thermalManager.disable_all_heaters(); #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + for (uint8_t i = 0; i < FAN_COUNT; i++) fan_speed[i] = 0; #endif wait_for_heatup = false; write_to_lcd_P(PSTR("{SYS:STARTED}")); diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index c6409ad07c..1b381f1a02 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -159,7 +159,8 @@ millis_t next_lcd_update_ms; constexpr int8_t menu_bottom = LCD_HEIGHT - (TALL_FONT_CORRECTION); // Initialized by settings.load() - int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; + int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2]; + uint8_t lcd_preheat_fan_speed[2]; #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) bool lcd_external_control; // = false @@ -945,7 +946,7 @@ void lcd_quick_feedback(const bool clear_buttons) { // Restore print cooling fan speeds for (uint8_t i = 0; i < FAN_COUNT; i++) { - int16_t f = job_recovery_info.fanSpeeds[i]; + uint8_t f = job_recovery_info.fan_speed[i]; if (f) { sprintf_P(cmd, PSTR("M106 P%i S%i"), i, f); enqueue_and_echo_command(cmd); @@ -1553,21 +1554,21 @@ void lcd_quick_feedback(const bool clear_buttons) { // #if FAN_COUNT > 0 #if HAS_FAN0 - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fan_speed[0], 0, 255); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fan_speed[0], 3, 255); #endif #endif #if HAS_FAN1 - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 2", &fan_speed[1], 0, 255); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 2", &new_fanSpeeds[1], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &new_fan_speed[1], 3, 255); #endif #endif #if HAS_FAN2 - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 3", &fan_speed[2], 0, 255); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 3", &new_fanSpeeds[2], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &new_fan_speed[2], 3, 255); #endif #endif #endif // FAN_COUNT > 0 @@ -1669,7 +1670,7 @@ void lcd_quick_feedback(const bool clear_buttons) { * "Temperature" submenu items * */ - void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const int16_t fan) { + void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const uint8_t fan) { if (temph > 0) thermalManager.setTargetHotend(MIN(heater_maxtemp[endnum], temph), endnum); #if HAS_HEATED_BED if (tempb >= 0) thermalManager.setTargetBed(tempb); @@ -1678,9 +1679,9 @@ void lcd_quick_feedback(const bool clear_buttons) { #endif #if FAN_COUNT > 0 #if FAN_COUNT > 1 - fanSpeeds[active_extruder < FAN_COUNT ? active_extruder : 0] = fan; + fan_speed[active_extruder < FAN_COUNT ? active_extruder : 0] = fan; #else - fanSpeeds[0] = fan; + fan_speed[0] = fan; #endif #else UNUSED(fan); @@ -1915,7 +1916,7 @@ void lcd_quick_feedback(const bool clear_buttons) { void lcd_cooldown() { #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + for (uint8_t i = 0; i < FAN_COUNT; i++) fan_speed[i] = 0; #endif thermalManager.disable_all_heaters(); lcd_return_to_status(); @@ -3609,21 +3610,21 @@ void lcd_quick_feedback(const bool clear_buttons) { // #if FAN_COUNT > 0 #if HAS_FAN0 - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fan_speed[0], 0, 255); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fan_speed[0], 3, 255); #endif #endif #if HAS_FAN1 - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 2", &fan_speed[1], 0, 255); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 2", &new_fanSpeeds[1], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &new_fan_speed[1], 3, 255); #endif #endif #if HAS_FAN2 - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 3", &fan_speed[2], 0, 255); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 3", &new_fanSpeeds[2], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &new_fan_speed[2], 3, 255); #endif #endif #endif // FAN_COUNT > 0 @@ -3755,7 +3756,7 @@ void lcd_quick_feedback(const bool clear_buttons) { #endif START_MENU(); MENU_BACK(MSG_CONFIGURATION); - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255); + MENU_ITEM_EDIT(int8, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255); #if HAS_TEMP_HOTEND MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15); #endif diff --git a/Marlin/src/lcd/ultralcd.h b/Marlin/src/lcd/ultralcd.h index 0468dcdfdd..58863a4d3d 100644 --- a/Marlin/src/lcd/ultralcd.h +++ b/Marlin/src/lcd/ultralcd.h @@ -107,7 +107,8 @@ typedef void (*screenFunc_t)(); typedef void (*menuAction_t)(); - extern int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; + extern int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2]; + extern uint8_t lcd_preheat_fan_speed[2]; #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) extern bool lcd_external_control; diff --git a/Marlin/src/lcd/ultralcd_impl_HD44780.h b/Marlin/src/lcd/ultralcd_impl_HD44780.h index 709c88a35b..eccda7446d 100644 --- a/Marlin/src/lcd/ultralcd_impl_HD44780.h +++ b/Marlin/src/lcd/ultralcd_impl_HD44780.h @@ -1008,13 +1008,13 @@ static void lcd_implementation_status_screen() { #if FAN_COUNT > 0 if (0 #if HAS_FAN0 - || fanSpeeds[0] + || fan_speed[0] #endif #if HAS_FAN1 - || fanSpeeds[1] + || fan_speed[1] #endif #if HAS_FAN2 - || fanSpeeds[2] + || fan_speed[2] #endif ) leds |= LED_C; #endif // FAN_COUNT > 0 diff --git a/Marlin/src/libs/softspi.h b/Marlin/src/libs/softspi.h index 8b3b671455..ad4e4e7194 100644 --- a/Marlin/src/libs/softspi.h +++ b/Marlin/src/libs/softspi.h @@ -31,7 +31,7 @@ void fastDigitalWrite(uint8_t pin, bool value) { * @return value read */ static inline __attribute__((always_inline)) -bool fastDigitalRead(uint8_t pin){ +bool fastDigitalRead(uint8_t pin) { return g_APinDescription[pin].pPort->PIO_PDSR & g_APinDescription[pin].ulPin; } //------------------------------------------------------------------------------ @@ -40,7 +40,7 @@ bool fastDigitalRead(uint8_t pin){ * @param[in] level value to write */ static inline __attribute__((always_inline)) -void fastDigitalWrite(uint8_t pin, bool value){ +void fastDigitalWrite(uint8_t pin, bool value) { if (value) g_APinDescription[pin].pPort->PIO_SODR = g_APinDescription[pin].ulPin; else diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index dd97441dc6..fae14db100 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -37,7 +37,7 @@ */ // Change EEPROM version if the structure changes -#define EEPROM_VERSION "V59" +#define EEPROM_VERSION "V60" #define EEPROM_OFFSET 0 // Check the integrity of data offsets. @@ -214,8 +214,8 @@ typedef struct SettingsDataStruct { // ULTIPANEL // int16_t lcd_preheat_hotend_temp[2], // M145 S0 H - lcd_preheat_bed_temp[2], // M145 S0 B - lcd_preheat_fan_speed[2]; // M145 S0 F + lcd_preheat_bed_temp[2]; // M145 S0 B + uint8_t lcd_preheat_fan_speed[2]; // M145 S0 F // // PIDTEMP @@ -630,8 +630,8 @@ void MarlinSettings::postprocess() { #if DISABLED(ULTIPANEL) constexpr int16_t lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, - lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }, - lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; + lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }; + constexpr uint8_t lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; #endif EEPROM_WRITE(lcd_preheat_hotend_temp); @@ -1238,17 +1238,13 @@ void MarlinSettings::postprocess() { _FIELD_TEST(lcd_preheat_hotend_temp); #if DISABLED(ULTIPANEL) - int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; + int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2]; + uint8_t lcd_preheat_fan_speed[2]; #endif EEPROM_READ(lcd_preheat_hotend_temp); // 2 floats EEPROM_READ(lcd_preheat_bed_temp); // 2 floats EEPROM_READ(lcd_preheat_fan_speed); // 2 floats - //EEPROM_ASSERT( - // WITHIN(lcd_preheat_fan_speed, 0, 255), - // "lcd_preheat_fan_speed out of range" - //); - // // Hotend PID // @@ -2489,7 +2485,7 @@ void MarlinSettings::reset(PORTARG_SOLO) { SERIAL_ECHOPAIR_P(port, " M145 S", (int)i); SERIAL_ECHOPAIR_P(port, " H", TEMP_UNIT(lcd_preheat_hotend_temp[i])); SERIAL_ECHOPAIR_P(port, " B", TEMP_UNIT(lcd_preheat_bed_temp[i])); - SERIAL_ECHOLNPAIR_P(port, " F", lcd_preheat_fan_speed[i]); + SERIAL_ECHOLNPAIR_P(port, " F", int(lcd_preheat_fan_speed[i])); } #endif // ULTIPANEL diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index c502976095..278011042e 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -1187,8 +1187,8 @@ void Planner::recalculate() { * Maintain fans, paste extruder pressure, */ void Planner::check_axes_activity() { - unsigned char axis_active[NUM_AXIS] = { 0 }, - tail_fan_speed[FAN_COUNT]; + uint8_t axis_active[NUM_AXIS] = { 0 }, + tail_fan_speed[FAN_COUNT]; #if ENABLED(BARICUDA) #if HAS_HEATER_1 @@ -1225,7 +1225,7 @@ void Planner::check_axes_activity() { } else { #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) tail_fan_speed[i] = fanSpeeds[i]; + for (uint8_t i = 0; i < FAN_COUNT; i++) tail_fan_speed[i] = fan_speed[i]; #endif #if ENABLED(BARICUDA) @@ -1774,7 +1774,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, #endif #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) block->fan_speed[i] = fanSpeeds[i]; + for (uint8_t i = 0; i < FAN_COUNT; i++) block->fan_speed[i] = fan_speed[i]; #endif #if ENABLED(BARICUDA) diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index acdfbd816c..1e5caa994f 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -144,7 +144,7 @@ typedef struct { acceleration_steps_per_s2; // acceleration steps/sec^2 #if FAN_COUNT > 0 - uint16_t fan_speed[FAN_COUNT]; + uint8_t fan_speed[FAN_COUNT]; #endif #if ENABLED(BARICUDA) diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 797ec5fb0a..b19433b10f 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -273,12 +273,12 @@ float zprobe_zoffset; // Initialized by settings.load() fans_paused = p; if (p) for (uint8_t x = 0; x < FAN_COUNT; x++) { - paused_fanSpeeds[x] = fanSpeeds[x]; - fanSpeeds[x] = 0; + paused_fan_speed[x] = fan_speed[x]; + fan_speed[x] = 0; } else for (uint8_t x = 0; x < FAN_COUNT; x++) - fanSpeeds[x] = paused_fanSpeeds[x]; + fan_speed[x] = paused_fan_speed[x]; } } diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index b4f5beb722..1f49cae90c 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -97,7 +97,7 @@ int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 }, Temperature::target_temperature[HOTENDS] = { 0 }; #if ENABLED(AUTO_POWER_E_FANS) - int16_t Temperature::autofan_speed[HOTENDS] = { 0 }; + uint8_t Temperature::autofan_speed[HOTENDS] = { 0 }; #endif #if HAS_HEATED_BED diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 50b74fc662..8f451be2b8 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -123,7 +123,7 @@ class Temperature { static uint8_t soft_pwm_amount[HOTENDS]; #if ENABLED(AUTO_POWER_E_FANS) - static int16_t autofan_speed[HOTENDS]; + static uint8_t autofan_speed[HOTENDS]; #endif #if ENABLED(FAN_SOFT_PWM)