diff --git a/Marlin/src/feature/bedlevel/bedlevel.cpp b/Marlin/src/feature/bedlevel/bedlevel.cpp
index 2e1037f140..d1759efa92 100644
--- a/Marlin/src/feature/bedlevel/bedlevel.cpp
+++ b/Marlin/src/feature/bedlevel/bedlevel.cpp
@@ -260,13 +260,10 @@ void reset_bed_level() {
 
     #if MANUAL_PROBE_HEIGHT > 0
       const float prev_z = current_position[Z_AXIS];
-      do_blocking_move_to_z(MANUAL_PROBE_HEIGHT, homing_feedrate(Z_AXIS));
-    #endif
-
-    do_blocking_move_to_xy(rx, ry, MMM_TO_MMS(XY_PROBE_SPEED));
-
-    #if MANUAL_PROBE_HEIGHT > 0
-      do_blocking_move_to_z(prev_z, homing_feedrate(Z_AXIS));
+      do_blocking_move_to(rx, ry, MANUAL_PROBE_HEIGHT);
+      do_blocking_move_to_z(prev_z);
+    #else
+      do_blocking_move_to_xy(rx, ry);
     #endif
 
     current_position[X_AXIS] = rx;
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
index 57bcabf35e..94bc875f00 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -467,6 +467,7 @@
             //
             SERIAL_PROTOCOLLNPGM("Manually probing unreachable mesh locations.");
             do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
+
             if (!g29_x_flag && !g29_y_flag) {
               /**
                * Use a good default location for the path.
@@ -910,12 +911,11 @@
 
     static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); }
 
-    float unified_bed_leveling::measure_business_card_thickness(float in_height) {
+    float unified_bed_leveling::measure_business_card_thickness(const float in_height) {
       has_control_of_lcd_panel = true;
       save_ubl_active_state_and_disable();   // Disable bed level correction for probing
 
-      do_blocking_move_to_z(in_height);
-      do_blocking_move_to_xy(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y)));
+      do_blocking_move_to(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y)), in_height);
         //, min(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS]) / 2.0);
       stepper.synchronize();
 
@@ -944,8 +944,6 @@
         SERIAL_PROTOCOLLNPGM("mm thick.");
       }
 
-      in_height = current_position[Z_AXIS]; // do manual probing at lower height
-
       has_control_of_lcd_panel = false;
 
       restore_ubl_active_state_and_leave();
@@ -958,8 +956,8 @@
       has_control_of_lcd_panel = true;
 
       save_ubl_active_state_and_disable();   // we don't do bed level correction because we want the raw data when we probe
-      do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
-      do_blocking_move_to_xy(rx, ry);
+
+      do_blocking_move_to(rx, ry, Z_CLEARANCE_BETWEEN_PROBES);
 
       lcd_return_to_status();
 
@@ -974,11 +972,9 @@
 
         if (!position_is_reachable(xProbe, yProbe)) break; // SHOULD NOT OCCUR (find_closest_mesh_point only returns reachable points)
 
-        do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
-
         LCD_MESSAGEPGM(MSG_UBL_MOVING_TO_NEXT);
 
-        do_blocking_move_to_xy(xProbe, yProbe);
+        do_blocking_move_to(xProbe, yProbe, Z_CLEARANCE_BETWEEN_PROBES);
         do_blocking_move_to_z(z_clearance);
 
         KEEPALIVE_STATE(PAUSED_FOR_USER);
@@ -1035,8 +1031,7 @@
 
       restore_ubl_active_state_and_leave();
       KEEPALIVE_STATE(IN_HANDLER);
-      do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE);
-      do_blocking_move_to_xy(rx, ry);
+      do_blocking_move_to(rx, ry, Z_CLEARANCE_DEPLOY_PROBE);
     }
 
   #endif // NEWPANEL
@@ -1486,8 +1481,7 @@
 
       LCD_MESSAGEPGM(MSG_UBL_FINE_TUNE_MESH);
 
-      do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
-      do_blocking_move_to_xy(rx, ry);
+      do_blocking_move_to(rx, ry, Z_CLEARANCE_BETWEEN_PROBES);
 
       uint16_t not_done[16];
       memset(not_done, 0xFF, sizeof(not_done));
@@ -1510,8 +1504,7 @@
         if (isnan(new_z)) // if the mesh point is invalid, set it to 0.0 so it can be edited
           new_z = 0.0;
 
-        do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);    // Move the nozzle to where we are going to edit
-        do_blocking_move_to_xy(rawx, rawy);
+        do_blocking_move_to(rawx, rawy, Z_CLEARANCE_BETWEEN_PROBES); // Move the nozzle to the edit point
 
         new_z = FLOOR(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place
 
@@ -1571,9 +1564,8 @@
 
       if (do_ubl_mesh_map) display_map(g29_map_type);
       restore_ubl_active_state_and_leave();
-      do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
 
-      do_blocking_move_to_xy(rx, ry);
+      do_blocking_move_to(rx, ry, Z_CLEARANCE_BETWEEN_PROBES);
 
       LCD_MESSAGEPGM(MSG_UBL_DONE_EDITING_MESH);
       SERIAL_ECHOLNPGM("Done Editing Mesh");
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index 854a8e34ef..802190297f 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -785,6 +785,9 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
  *
  * This may result in several calls to planner.buffer_line to
  * do smaller moves for DELTA, SCARA, mesh moves, etc.
+ *
+ * Make sure current_position[E] and destination[E] are good
+ * before calling or cold/lengthy extrusion may get missed.
  */
 void prepare_move_to_destination() {
   clamp_to_software_endstops(destination);