diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 7803bdd0a4..a525894a47 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -399,6 +399,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index cd260bf89c..fedea0d248 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -417,6 +417,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index fe95e1a2e1..15546db889 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -369,6 +369,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 04a9060c2e..a392e7f915 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -392,6 +392,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 5655219ddd..3b16d3cabc 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -397,6 +397,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 8e4a5ea7df..c35f4f21b5 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -421,6 +421,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 1bde594417..9e42757859 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -391,6 +391,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 5a25872b06..9a14554c69 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -419,6 +419,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index a5ebffcdd7..006d964a65 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -419,6 +419,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index c3566eb57f..6498eac599 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -389,6 +389,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index c88fe81281..20545496ed 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -391,6 +391,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
+
+  #ifdef DELTA
+    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
+  #endif
+
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10