diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index 4bdbe74b57..e11db20bc5 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -1145,7 +1145,7 @@ void loop() {
         #endif
         #ifdef EVENT_GCODE_SD_STOP
           enqueue_and_echo_commands_P(PSTR(EVENT_GCODE_SD_STOP));
-        #endif  
+        #endif
       }
     #endif // SDSUPPORT
 
diff --git a/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.cpp b/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.cpp
index 15899bdee9..188ddb898d 100644
--- a/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.cpp
+++ b/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.cpp
@@ -49,8 +49,8 @@
     ZERO(z_values);
     #if ENABLED(EXTENSIBLE_UI)
       for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
-        for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) 
-            ExtUI::onMeshUpdate(x, y, 0);
+        for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)
+          ExtUI::onMeshUpdate(x, y, 0);
     #endif
   }
 
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.cpp b/Marlin/src/feature/bedlevel/ubl/ubl.cpp
index ad0799a6d2..567fc4877e 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl.cpp
@@ -35,7 +35,7 @@
   #if ENABLED(EXTENSIBLE_UI)
     #include "../../../lcd/extensible_ui/ui_api.h"
   #endif
-  
+
   #include "math.h"
 
   void unified_bed_leveling::echo_name() {
@@ -135,8 +135,8 @@
     ZERO(z_values);
     #if ENABLED(EXTENSIBLE_UI)
       for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
-        for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) 
-            ExtUI::onMeshUpdate(x, y, 0);
+        for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)
+          ExtUI::onMeshUpdate(x, y, 0);
     #endif
     if (was_enabled) report_current_position();
   }
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
index e588bd2b50..ff5d3128f9 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -765,14 +765,12 @@
 
         if (location.x_index >= 0) {    // mesh point found and is reachable by probe
           const float rawx = mesh_index_to_xpos(location.x_index),
-                      rawy = mesh_index_to_ypos(location.y_index);
-
-          const float measured_z = probe_pt(rawx, rawy, stow_probe ? PROBE_PT_STOW : PROBE_PT_RAISE, g29_verbose_level); // TODO: Needs error handling
+                      rawy = mesh_index_to_ypos(location.y_index),
+                      measured_z = probe_pt(rawx, rawy, stow_probe ? PROBE_PT_STOW : PROBE_PT_RAISE, g29_verbose_level); // TODO: Needs error handling
           z_values[location.x_index][location.y_index] = measured_z;
           #if ENABLED(EXTENSIBLE_UI)
             ExtUI::onMeshUpdate(location.x_index, location.y_index, measured_z);
           #endif
-          
         }
         SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
       } while (location.x_index >= 0 && --count);
diff --git a/Marlin/src/gcode/control/M605.cpp b/Marlin/src/gcode/control/M605.cpp
index 5894e66da7..f1f64f0ce3 100644
--- a/Marlin/src/gcode/control/M605.cpp
+++ b/Marlin/src/gcode/control/M605.cpp
@@ -42,10 +42,10 @@
    *
    *   M605 S0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
    *             results as long as it supports dual X-carriages.
-   * 
+   *
    *   M605 S1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so that
    *             additional slicer support is not required.
-   * 
+   *
    *   M605 S2 X R : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
    *             the first X-carriage and extruder, to print 2 copies of the same object at the same time.
    *             Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
diff --git a/Marlin/src/lcd/extensible_ui/ui_api.h b/Marlin/src/lcd/extensible_ui/ui_api.h
index fc7a867818..b5be58dcca 100644
--- a/Marlin/src/lcd/extensible_ui/ui_api.h
+++ b/Marlin/src/lcd/extensible_ui/ui_api.h
@@ -105,7 +105,7 @@ namespace ExtUI {
   float getFeedrate_percent();
   uint8_t getProgress_percent();
   uint32_t getProgress_seconds_elapsed();
-  
+
   #if HAS_LEVELING
     bool getLevelingActive();
     void setLevelingActive(const bool);
diff --git a/platformio.ini b/platformio.ini
index d8f1de564a..e605a3d837 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -307,7 +307,7 @@ framework     = arduino
 board         = genericSTM32F103ZE
 extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin.py
 build_flags   = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
- -DSTM32_XL_DENSITY 
+ -DSTM32_XL_DENSITY
   ${common.build_flags}
   -DSTM32_XL_DENSITY
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>