Browse Source

Fix X/Y/Z_MIN_PIN for Printrboard.

pull/1/head
Johann Rocholl 12 years ago
parent
commit
ca409e5531
  1. 15
      Marlin/pins.h

15
Marlin/pins.h

@ -973,19 +973,16 @@
#define X_STEP_PIN 0 #define X_STEP_PIN 0
#define X_DIR_PIN 1 #define X_DIR_PIN 1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 39
#define X_MIN_PIN 13
#define X_MAX_PIN -1 #define X_MAX_PIN -1
#define Y_STEP_PIN 2 #define Y_STEP_PIN 2
#define Y_DIR_PIN 3 #define Y_DIR_PIN 3
#define Y_ENABLE_PIN 38 #define Y_ENABLE_PIN 38
#define Y_MIN_PIN 14
#define Y_MAX_PIN -1 #define Y_MAX_PIN -1
#define Z_STEP_PIN 4 #define Z_STEP_PIN 4
#define Z_DIR_PIN 5 #define Z_DIR_PIN 5
#define Z_ENABLE_PIN 23 #define Z_ENABLE_PIN 23
#define Z_MIN_PIN 15
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#define E0_STEP_PIN 6 #define E0_STEP_PIN 6
@ -997,11 +994,19 @@
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed #define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 22 // Fan #define FAN_PIN 22 // Fan
// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping.
#if MOTHERBOARD == 8 #if MOTHERBOARD == 8 // Teensylu
#define X_MIN_PIN 13
#define Y_MIN_PIN 14
#define Z_MIN_PIN 15
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#else #else // Printrboard
#define X_MIN_PIN 35
#define Y_MIN_PIN 8
#define Z_MIN_PIN 36
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering #define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering #define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#endif #endif

Loading…
Cancel
Save