Scott Lahteine
9 years ago
3 changed files with 707 additions and 737 deletions
@ -1,735 +0,0 @@ |
|||||
/**
|
|
||||
* Marlin 3D Printer Firmware |
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
||||
* |
|
||||
* Based on Sprinter and grbl. |
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|
||||
* |
|
||||
* This program is free software: you can redistribute it and/or modify |
|
||||
* it under the terms of the GNU General Public License as published by |
|
||||
* the Free Software Foundation, either version 3 of the License, or |
|
||||
* (at your option) any later version. |
|
||||
* |
|
||||
* This program is distributed in the hope that it will be useful, |
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|
||||
* GNU General Public License for more details. |
|
||||
* |
|
||||
* You should have received a copy of the GNU General Public License |
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||
* |
|
||||
*/ |
|
||||
|
|
||||
/**
|
|
||||
* SanityCheck.cpp |
|
||||
* |
|
||||
* Test configuration values for errors at compile-time. |
|
||||
* This is done only once, here, to speed up compilation time. |
|
||||
*/ |
|
||||
#include "MarlinConfig.h" |
|
||||
|
|
||||
/**
|
|
||||
* Due to the high number of issues related with old versions of Arduino IDE |
|
||||
* we are now warning our users to update their toolkits. In a future Marlin |
|
||||
* release we will stop supporting old IDE versions and will require user |
|
||||
* action to proceed with compilation in such environments. |
|
||||
*/ |
|
||||
#if !defined(ARDUINO) || ARDUINO < 10600 |
|
||||
#error "Versions of Arduino IDE prior to 1.6.0 are no longer supported, please update your toolkit." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* We try our best to include sanity checks for all the changes configuration |
|
||||
* directives because people have a tendency to use outdated config files with |
|
||||
* the bleding edge source code, but sometimes this is not enough. This check |
|
||||
* will force a minimum config file revision, otherwise Marlin will not build. |
|
||||
*/ |
|
||||
#if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION |
|
||||
#error "You are using an old Configuration.h file, update it before building Marlin." |
|
||||
#endif |
|
||||
|
|
||||
#if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION |
|
||||
#error "You are using an old Configuration_adv.h file, update it before building Marlin." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Marlin release, version and default string |
|
||||
*/ |
|
||||
#ifndef SHORT_BUILD_VERSION |
|
||||
#error "SHORT_BUILD_VERSION must be specified." |
|
||||
#elif !defined(DETAILED_BUILD_VERSION) |
|
||||
#error "BUILD_VERSION must be specified." |
|
||||
#elif !defined(STRING_DISTRIBUTION_DATE) |
|
||||
#error "STRING_DISTRIBUTION_DATE must be specified." |
|
||||
#elif !defined(PROTOCOL_VERSION) |
|
||||
#error "PROTOCOL_VERSION must be specified." |
|
||||
#elif !defined(MACHINE_NAME) |
|
||||
#error "MACHINE_NAME must be specified." |
|
||||
#elif !defined(SOURCE_CODE_URL) |
|
||||
#error "SOURCE_CODE_URL must be specified." |
|
||||
#elif !defined(DEFAULT_MACHINE_UUID) |
|
||||
#error "DEFAULT_MACHINE_UUID must be specified." |
|
||||
#elif !defined(WEBSITE_URL) |
|
||||
#error "WEBSITE_URL must be specified." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Dual Stepper Drivers |
|
||||
*/ |
|
||||
#if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE) |
|
||||
#error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS." |
|
||||
#elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR) |
|
||||
#error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)." |
|
||||
#elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR) |
|
||||
#error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)." |
|
||||
#elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR) |
|
||||
#error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Progress Bar |
|
||||
*/ |
|
||||
#if ENABLED(LCD_PROGRESS_BAR) |
|
||||
#if DISABLED(SDSUPPORT) |
|
||||
#error "LCD_PROGRESS_BAR requires SDSUPPORT." |
|
||||
#endif |
|
||||
#if ENABLED(DOGLCD) |
|
||||
#error "LCD_PROGRESS_BAR does not apply to graphical displays." |
|
||||
#endif |
|
||||
#if ENABLED(FILAMENT_LCD_DISPLAY) |
|
||||
#error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Babystepping |
|
||||
*/ |
|
||||
#if ENABLED(BABYSTEPPING) |
|
||||
#if DISABLED(ULTRA_LCD) |
|
||||
#error "BABYSTEPPING requires an LCD controller." |
|
||||
#endif |
|
||||
#if ENABLED(SCARA) |
|
||||
#error "BABYSTEPPING is not implemented for SCARA yet." |
|
||||
#endif |
|
||||
#if ENABLED(DELTA) && ENABLED(BABYSTEP_XY) |
|
||||
#error "BABYSTEPPING only implemented for Z axis on deltabots." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Filament Runout needs a pin and either SD Support or Auto print start detection |
|
||||
*/ |
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR) |
|
||||
#if !HAS_FIL_RUNOUT |
|
||||
#error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN." |
|
||||
#elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART) |
|
||||
#error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Filament Change with Extruder Runout Prevention |
|
||||
*/ |
|
||||
#if ENABLED(FILAMENT_CHANGE_FEATURE) && ENABLED(EXTRUDER_RUNOUT_PREVENT) |
|
||||
#error "EXTRUDER_RUNOUT_PREVENT is incompatible with FILAMENT_CHANGE_FEATURE." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Individual axis homing is useless for DELTAS |
|
||||
*/ |
|
||||
#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA) |
|
||||
#error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Options only for EXTRUDERS > 1 |
|
||||
*/ |
|
||||
#if EXTRUDERS > 1 |
|
||||
|
|
||||
#if EXTRUDERS > 4 |
|
||||
#error "The maximum number of EXTRUDERS in Marlin is 4." |
|
||||
#endif |
|
||||
|
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) |
|
||||
#error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT." |
|
||||
#endif |
|
||||
|
|
||||
#if ENABLED(HEATERS_PARALLEL) |
|
||||
#error "EXTRUDERS must be 1 with HEATERS_PARALLEL." |
|
||||
#endif |
|
||||
|
|
||||
#elif ENABLED(SINGLENOZZLE) |
|
||||
#error "SINGLENOZZLE requires 2 or more EXTRUDERS." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Only one type of extruder allowed |
|
||||
*/ |
|
||||
#if (ENABLED(SWITCHING_EXTRUDER) && (ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER))) \ |
|
||||
|| (ENABLED(SINGLENOZZLE) && ENABLED(MIXING_EXTRUDER)) |
|
||||
#error "Please define only one type of extruder: SINGLENOZZLE, SWITCHING_EXTRUDER, or MIXING_EXTRUDER." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Single Stepper Dual Extruder with switching servo |
|
||||
*/ |
|
||||
#if ENABLED(SWITCHING_EXTRUDER) |
|
||||
#if ENABLED(DUAL_X_CARRIAGE) |
|
||||
#error "SWITCHING_EXTRUDER and DUAL_X_CARRIAGE are incompatible." |
|
||||
#elif EXTRUDERS != 2 |
|
||||
#error "SWITCHING_EXTRUDER requires exactly 2 EXTRUDERS." |
|
||||
#elif NUM_SERVOS < 1 |
|
||||
#error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Mixing Extruder requirements |
|
||||
*/ |
|
||||
#if ENABLED(MIXING_EXTRUDER) |
|
||||
#if EXTRUDERS > 1 |
|
||||
#error "MIXING_EXTRUDER currently only supports one extruder." |
|
||||
#endif |
|
||||
#if MIXING_STEPPERS < 2 |
|
||||
#error "You must set MIXING_STEPPERS >= 2 for a mixing extruder." |
|
||||
#endif |
|
||||
#if ENABLED(FILAMENT_SENSOR) |
|
||||
#error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Limited number of servos |
|
||||
*/ |
|
||||
#if defined(NUM_SERVOS) && NUM_SERVOS > 0 |
|
||||
#if NUM_SERVOS > 4 |
|
||||
#error "The maximum number of SERVOS in Marlin is 4." |
|
||||
#elif HAS_Z_SERVO_ENDSTOP && Z_ENDSTOP_SERVO_NR >= NUM_SERVOS |
|
||||
#error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Servo deactivation depends on servo endstops |
|
||||
*/ |
|
||||
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP |
|
||||
#error "Z_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Required LCD language |
|
||||
*/ |
|
||||
#if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780) |
|
||||
#error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Bed Heating Options - PID vs Limit Switching |
|
||||
*/ |
|
||||
#if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING) |
|
||||
#error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Mesh Bed Leveling |
|
||||
*/ |
|
||||
#if ENABLED(MESH_BED_LEVELING) |
|
||||
#if ENABLED(DELTA) |
|
||||
#error "MESH_BED_LEVELING does not yet support DELTA printers." |
|
||||
#elif ENABLED(AUTO_BED_LEVELING_FEATURE) |
|
||||
#error "Select AUTO_BED_LEVELING_FEATURE or MESH_BED_LEVELING, not both." |
|
||||
#elif MESH_NUM_X_POINTS > 9 || MESH_NUM_Y_POINTS > 9 |
|
||||
#error "MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS must be less than 10." |
|
||||
#endif |
|
||||
#elif ENABLED(MANUAL_BED_LEVELING) |
|
||||
#error "MESH_BED_LEVELING is required for MANUAL_BED_LEVELING." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Probes |
|
||||
*/ |
|
||||
|
|
||||
#if PROBE_SELECTED |
|
||||
|
|
||||
#if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA) |
|
||||
#error "You cannot use Z_PROBE_SLED with DELTA." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* NUM_SERVOS is required for a Z servo probe |
|
||||
*/ |
|
||||
#if HAS_Z_SERVO_ENDSTOP |
|
||||
#ifndef NUM_SERVOS |
|
||||
#error "You must set NUM_SERVOS for a Z servo probe (Z_ENDSTOP_SERVO_NR)." |
|
||||
#elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS |
|
||||
#error "Z_ENDSTOP_SERVO_NR must be less than NUM_SERVOS." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* A probe needs a pin |
|
||||
*/ |
|
||||
#if !PROBE_PIN_CONFIGURED |
|
||||
#error "A probe needs a pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Z_MIN_PIN and Z_MIN_PROBE_PIN can't co-exist when Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN |
|
||||
*/ |
|
||||
#if HAS_Z_MIN && HAS_Z_MIN_PROBE_PIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) |
|
||||
#error "A probe cannot have more than one pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Make sure the plug is enabled if it's used |
|
||||
*/ |
|
||||
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && DISABLED(USE_ZMIN_PLUG) |
|
||||
#error "You must enable USE_ZMIN_PLUG if any probe or endstop is connected to the ZMIN plug." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Only allow one probe option to be defined |
|
||||
*/ |
|
||||
#if (ENABLED(FIX_MOUNTED_PROBE) && (ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))) \ |
|
||||
|| (ENABLED(Z_PROBE_ALLEN_KEY) && (HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))) \ |
|
||||
|| (HAS_Z_SERVO_ENDSTOP && ENABLED(Z_PROBE_SLED)) |
|
||||
#error "Please define only one type of probe: Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Don't allow nonsense probe-pin settings |
|
||||
*/ |
|
||||
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(Z_MIN_PROBE_ENDSTOP) |
|
||||
#error "You can't enable both Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN and Z_MIN_PROBE_ENDSTOP." |
|
||||
#elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) |
|
||||
#error "Don't enable DISABLE_Z_MIN_PROBE_ENDSTOP with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN." |
|
||||
#elif ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) && DISABLED(Z_MIN_PROBE_ENDSTOP) |
|
||||
#error "DISABLE_Z_MIN_PROBE_ENDSTOP requires Z_MIN_PROBE_ENDSTOP to be set." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Require a Z probe pin if Z_MIN_PROBE_ENDSTOP is enabled. |
|
||||
*/ |
|
||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP) |
|
||||
#if !HAS_Z_MIN_PROBE_PIN |
|
||||
#error "Z_MIN_PROBE_ENDSTOP requires a Z_MIN_PROBE_PIN in your board's pins_XXXX.h file." |
|
||||
#endif |
|
||||
// Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment.
|
|
||||
//#ifndef NUM_SERVOS
|
|
||||
// #error "You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_MIN_PROBE_ENDSTOP."
|
|
||||
//#endif
|
|
||||
//#if defined(NUM_SERVOS) && NUM_SERVOS < 1
|
|
||||
// #error "You must have at least 1 servo defined for NUM_SERVOS to use Z_MIN_PROBE_ENDSTOP."
|
|
||||
//#endif
|
|
||||
//#if Z_ENDSTOP_SERVO_NR < 0
|
|
||||
// #error "You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_MIN_PROBE_ENDSTOP."
|
|
||||
//#endif
|
|
||||
//#ifndef Z_SERVO_ANGLES
|
|
||||
// #error "You must have Z_SERVO_ANGLES defined for Z Extend and Retract to use Z_MIN_PROBE_ENDSTOP."
|
|
||||
//#endif
|
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Make sure Z raise values are set |
|
||||
*/ |
|
||||
#if defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING) |
|
||||
#error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_RAISE_PROBE_DEPLOY_STOW instead." |
|
||||
#elif !defined(Z_RAISE_PROBE_DEPLOY_STOW) |
|
||||
#error "You must set Z_RAISE_PROBE_DEPLOY_STOW in your configuration." |
|
||||
#elif !defined(Z_RAISE_BETWEEN_PROBINGS) |
|
||||
#error "You must set Z_RAISE_BETWEEN_PROBINGS in your configuration." |
|
||||
#elif Z_RAISE_PROBE_DEPLOY_STOW < 0 |
|
||||
#error "Probes need Z_RAISE_PROBE_DEPLOY_STOW >= 0." |
|
||||
#elif Z_RAISE_BETWEEN_PROBINGS < 0 |
|
||||
#error "Probes need Z_RAISE_BETWEEN_PROBINGS >= 0." |
|
||||
#endif |
|
||||
|
|
||||
#else |
|
||||
|
|
||||
/**
|
|
||||
* Require some kind of probe for bed leveling and probe testing |
|
||||
*/ |
|
||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE) |
|
||||
#error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." |
|
||||
#elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) |
|
||||
#error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." |
|
||||
#endif |
|
||||
|
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Make sure Z_SAFE_HOMING point is reachable |
|
||||
*/ |
|
||||
#if ENABLED(Z_SAFE_HOMING) |
|
||||
#if Z_SAFE_HOMING_X_POINT < MIN_PROBE_X || Z_SAFE_HOMING_X_POINT > MAX_PROBE_X |
|
||||
#if HAS_BED_PROBE |
|
||||
#error "Z_SAFE_HOMING_X_POINT can't be reached by the Z probe." |
|
||||
#else |
|
||||
#error "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle." |
|
||||
#endif |
|
||||
#elif Z_SAFE_HOMING_Y_POINT < MIN_PROBE_Y || Z_SAFE_HOMING_Y_POINT > MAX_PROBE_Y |
|
||||
#if HAS_BED_PROBE |
|
||||
#error "Z_SAFE_HOMING_Y_POINT can't be reached by the Z probe." |
|
||||
#else |
|
||||
#error "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle." |
|
||||
#endif |
|
||||
#endif |
|
||||
#endif // Z_SAFE_HOMING
|
|
||||
|
|
||||
/**
|
|
||||
* Auto Bed Leveling |
|
||||
*/ |
|
||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE) |
|
||||
|
|
||||
/**
|
|
||||
* Delta has limited bed leveling options |
|
||||
*/ |
|
||||
#if ENABLED(DELTA) && DISABLED(AUTO_BED_LEVELING_GRID) |
|
||||
#error "You must use AUTO_BED_LEVELING_GRID for DELTA bed leveling." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Require a Z min pin |
|
||||
*/ |
|
||||
#if !PIN_EXISTS(Z_MIN) |
|
||||
#if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it.
|
|
||||
#error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Check if Probe_Offset * Grid Points is greater than Probing Range |
|
||||
*/ |
|
||||
#if ENABLED(AUTO_BED_LEVELING_GRID) |
|
||||
#ifndef DELTA_PROBEABLE_RADIUS |
|
||||
// Be sure points are in the right order
|
|
||||
#if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION |
|
||||
#error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION." |
|
||||
#elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION |
|
||||
#error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION." |
|
||||
#endif |
|
||||
// Make sure probing points are reachable
|
|
||||
#if LEFT_PROBE_BED_POSITION < MIN_PROBE_X |
|
||||
#error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe." |
|
||||
#elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X |
|
||||
#error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe." |
|
||||
#elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y |
|
||||
#error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe." |
|
||||
#elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y |
|
||||
#error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe." |
|
||||
#endif |
|
||||
#endif |
|
||||
#else // !AUTO_BED_LEVELING_GRID
|
|
||||
|
|
||||
// Check the triangulation points
|
|
||||
#if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X |
|
||||
#error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe." |
|
||||
#elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X |
|
||||
#error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe." |
|
||||
#elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X |
|
||||
#error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe." |
|
||||
#elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y |
|
||||
#error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe." |
|
||||
#elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y |
|
||||
#error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe." |
|
||||
#elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y |
|
||||
#error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe." |
|
||||
#endif |
|
||||
|
|
||||
#endif // !AUTO_BED_LEVELING_GRID
|
|
||||
|
|
||||
#endif // AUTO_BED_LEVELING_FEATURE
|
|
||||
|
|
||||
/**
|
|
||||
* Advance Extrusion |
|
||||
*/ |
|
||||
#if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE) |
|
||||
#error "You can enable ADVANCE or LIN_ADVANCE, but not both." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Filament Width Sensor |
|
||||
*/ |
|
||||
#if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR |
|
||||
#error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* ULTIPANEL encoder |
|
||||
*/ |
|
||||
#if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK) |
|
||||
#error "ULTIPANEL requires some kind of encoder." |
|
||||
#endif |
|
||||
|
|
||||
#if ENCODER_PULSES_PER_STEP < 0 |
|
||||
#error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* SAV_3DGLCD display options |
|
||||
*/ |
|
||||
#if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106) |
|
||||
#error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Don't set more than one kinematic type |
|
||||
*/ |
|
||||
#if (ENABLED(DELTA) && (ENABLED(SCARA) || ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \ |
|
||||
|| (ENABLED(SCARA) && (ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \ |
|
||||
|| (ENABLED(COREXY) && (ENABLED(COREXZ) || ENABLED(COREYZ))) \ |
|
||||
|| (ENABLED(COREXZ) && ENABLED(COREYZ)) |
|
||||
#error "Please enable only one of DELTA, SCARA, COREXY, COREXZ, or COREYZ." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Allen Key |
|
||||
* Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis. |
|
||||
*/ |
|
||||
#if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) |
|
||||
#error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY" |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Dual X Carriage requirements |
|
||||
*/ |
|
||||
#if ENABLED(DUAL_X_CARRIAGE) |
|
||||
#if EXTRUDERS == 1 |
|
||||
#error "DUAL_X_CARRIAGE requires 2 (or more) extruders." |
|
||||
#elif ENABLED(COREXY) || ENABLED(COREXZ) |
|
||||
#error "DUAL_X_CARRIAGE cannot be used with COREXY or COREXZ." |
|
||||
#elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR |
|
||||
#error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined." |
|
||||
#elif !HAS_X_MAX |
|
||||
#error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop." |
|
||||
#elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) |
|
||||
#error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS." |
|
||||
#elif X_HOME_DIR != -1 || X2_HOME_DIR != 1 |
|
||||
#error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1." |
|
||||
#endif |
|
||||
#endif // DUAL_X_CARRIAGE
|
|
||||
|
|
||||
/**
|
|
||||
* Make sure auto fan pins don't conflict with the fan pin |
|
||||
*/ |
|
||||
#if HAS_AUTO_FAN |
|
||||
#if HAS_FAN0 |
|
||||
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN |
|
||||
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN." |
|
||||
#elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN |
|
||||
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN." |
|
||||
#elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN |
|
||||
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN." |
|
||||
#elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN |
|
||||
#error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN." |
|
||||
#endif |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
#if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN |
|
||||
#error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN." |
|
||||
#endif |
|
||||
|
|
||||
#if HAS_CONTROLLERFAN |
|
||||
#if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN |
|
||||
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." |
|
||||
#elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN |
|
||||
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." |
|
||||
#elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN |
|
||||
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." |
|
||||
#elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN |
|
||||
#error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set. |
|
||||
*/ |
|
||||
#if !HAS_HEATER_0 |
|
||||
#error "HEATER_0_PIN not defined for this board." |
|
||||
#elif !PIN_EXISTS(TEMP_0) |
|
||||
#error "TEMP_0_PIN not defined for this board." |
|
||||
#elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE) |
|
||||
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board." |
|
||||
#elif TEMP_SENSOR_0 == 0 |
|
||||
#error "TEMP_SENSOR_0 is required." |
|
||||
#endif |
|
||||
|
|
||||
#if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL) |
|
||||
#if !HAS_HEATER_1 |
|
||||
#error "HEATER_1_PIN not defined for this board." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
#if HOTENDS > 1 |
|
||||
#if TEMP_SENSOR_1 == 0 |
|
||||
#error "TEMP_SENSOR_1 is required with 2 or more HOTENDS." |
|
||||
#elif !PIN_EXISTS(TEMP_1) |
|
||||
#error "TEMP_1_PIN not defined for this board." |
|
||||
#endif |
|
||||
#if HOTENDS > 2 |
|
||||
#if TEMP_SENSOR_2 == 0 |
|
||||
#error "TEMP_SENSOR_2 is required with 3 or more HOTENDS." |
|
||||
#elif !HAS_HEATER_2 |
|
||||
#error "HEATER_2_PIN not defined for this board." |
|
||||
#elif !PIN_EXISTS(TEMP_2) |
|
||||
#error "TEMP_2_PIN not defined for this board." |
|
||||
#endif |
|
||||
#if HOTENDS > 3 |
|
||||
#if TEMP_SENSOR_3 == 0 |
|
||||
#error "TEMP_SENSOR_3 is required with 4 HOTENDS." |
|
||||
#elif !HAS_HEATER_3 |
|
||||
#error "HEATER_3_PIN not defined for this board." |
|
||||
#elif !PIN_EXISTS(TEMP_3) |
|
||||
#error "TEMP_3_PIN not defined for this board." |
|
||||
#endif |
|
||||
#elif TEMP_SENSOR_3 != 0 |
|
||||
#error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders." |
|
||||
#endif |
|
||||
#elif TEMP_SENSOR_2 != 0 |
|
||||
#error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders." |
|
||||
#elif TEMP_SENSOR_3 != 0 |
|
||||
#error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders." |
|
||||
#endif |
|
||||
#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT) |
|
||||
#error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder." |
|
||||
#elif TEMP_SENSOR_2 != 0 |
|
||||
#error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder." |
|
||||
#elif TEMP_SENSOR_3 != 0 |
|
||||
#error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder." |
|
||||
#endif |
|
||||
|
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0 |
|
||||
#error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Basic 2-nozzle duplication mode |
|
||||
*/ |
|
||||
#if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) |
|
||||
#if HOTENDS != 2 |
|
||||
#error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends." |
|
||||
#elif ENABLED(DUAL_X_CARRIAGE) |
|
||||
#error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE." |
|
||||
#elif ENABLED(SINGLENOZZLE) |
|
||||
#error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE." |
|
||||
#elif ENABLED(MIXING_EXTRUDER) |
|
||||
#error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER." |
|
||||
#elif ENABLED(SWITCHING_EXTRUDER) |
|
||||
#error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Test Extruder Pins |
|
||||
*/ |
|
||||
#if EXTRUDERS > 3 |
|
||||
#if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE) |
|
||||
#error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board." |
|
||||
#endif |
|
||||
#elif EXTRUDERS > 2 |
|
||||
#if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE) |
|
||||
#error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board." |
|
||||
#endif |
|
||||
#elif EXTRUDERS > 1 |
|
||||
#if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE) |
|
||||
#error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board." |
|
||||
#endif |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Endstops |
|
||||
*/ |
|
||||
#if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _XMAX_ && Z2_USE_ENDSTOP <= _XMIN_) |
|
||||
#error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG" |
|
||||
#elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _YMAX_ && Z2_USE_ENDSTOP <= _YMIN_) |
|
||||
#error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG" |
|
||||
#elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _ZMAX_ && Z2_USE_ENDSTOP <= _ZMIN_) |
|
||||
#error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG" |
|
||||
#elif ENABLED(Z_DUAL_ENDSTOPS) && !Z2_USE_ENDSTOP |
|
||||
#error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS" |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* emergency-command parser |
|
||||
*/ |
|
||||
#if ENABLED(EMERGENCY_PARSER) && ENABLED(USBCON) |
|
||||
#error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)." |
|
||||
#endif |
|
||||
|
|
||||
/**
|
|
||||
* Warnings for old configurations |
|
||||
*/ |
|
||||
#if WATCH_TEMP_PERIOD > 500 |
|
||||
#error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds." |
|
||||
#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD)) |
|
||||
#error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS." |
|
||||
#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD) |
|
||||
#error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED." |
|
||||
#elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE) |
|
||||
#error "Z_LATE_ENABLE can't be used with COREXZ." |
|
||||
#elif defined(X_HOME_RETRACT_MM) |
|
||||
#error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM." |
|
||||
#elif defined(BEEPER) |
|
||||
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions." |
|
||||
#elif defined(SDCARDDETECT) |
|
||||
#error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions." |
|
||||
#elif defined(SDCARDDETECTINVERTED) |
|
||||
#error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration." |
|
||||
#elif defined(BTENABLED) |
|
||||
#error "BTENABLED is now BLUETOOTH. Please update your configuration." |
|
||||
#elif defined(CUSTOM_MENDEL_NAME) |
|
||||
#error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration." |
|
||||
#elif defined(HAS_AUTOMATIC_VERSIONING) |
|
||||
#error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration." |
|
||||
#elif defined(ENABLE_AUTO_BED_LEVELING) |
|
||||
#error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration." |
|
||||
#elif defined(SDSLOW) |
|
||||
#error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead." |
|
||||
#elif defined(SDEXTRASLOW) |
|
||||
#error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead." |
|
||||
#elif defined(Z_RAISE_BEFORE_HOMING) |
|
||||
#error "Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead." |
|
||||
#elif defined(FILAMENT_SENSOR) |
|
||||
#error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead." |
|
||||
#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS) |
|
||||
#error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead." |
|
||||
#elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP) |
|
||||
#error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2" |
|
||||
#elif defined(LANGUAGE_INCLUDE) |
|
||||
#error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration." |
|
||||
#elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y) |
|
||||
#error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead." |
|
||||
#elif defined(PID_PARAMS_PER_EXTRUDER) |
|
||||
#error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead." |
|
||||
#elif defined(EXTRUDER_WATTS) |
|
||||
#error "EXTRUDER_WATTS is deprecated. Use HOTEND_WATTS instead." |
|
||||
#elif defined(SERVO_ENDSTOP_ANGLES) |
|
||||
#error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead." |
|
||||
#elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR) |
|
||||
#error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed." |
|
||||
#elif defined(XY_TRAVEL_SPEED) |
|
||||
#error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead." |
|
||||
#elif defined(PROBE_SERVO_DEACTIVATION_DELAY) |
|
||||
#error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead." |
|
||||
#elif defined(SERVO_DEACTIVATION_DELAY) |
|
||||
#error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead." |
|
||||
#elif ENABLED(FILAMENTCHANGEENABLE) |
|
||||
#error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration." |
|
||||
#elif defined(PLA_PREHEAT_HOTEND_TEMP) |
|
||||
#error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration." |
|
||||
#elif defined(PLA_PREHEAT_HPB_TEMP) |
|
||||
#error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration." |
|
||||
#elif defined(PLA_PREHEAT_FAN_SPEED) |
|
||||
#error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration." |
|
||||
#elif defined(ABS_PREHEAT_HOTEND_TEMP) |
|
||||
#error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration." |
|
||||
#elif defined(ABS_PREHEAT_HPB_TEMP) |
|
||||
#error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration." |
|
||||
#elif defined(ABS_PREHEAT_FAN_SPEED) |
|
||||
#error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration." |
|
||||
#elif defined(ENDSTOPS_ONLY_FOR_HOMING) |
|
||||
#error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead." |
|
||||
#elif defined(HOMING_FEEDRATE) |
|
||||
#error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead." |
|
||||
#endif |
|
||||
Loading…
Reference in new issue