Option to leave heaters set on SD abort (#14251)

6 years ago · c88d9ae282
81 changed files with 245 additions and 1 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@ -1131,6 +1131,7 @@ void loop() {
  for (;;) {

    #if ENABLED(SDSUPPORT)
+
      card.checkautostart();

      if (card.flag.abort_sd_printing) {
@ -1142,7 +1143,9 @@ void loop() {
        clear_command_queue();
        quickstop_stepper();
        print_job_timer.stop();
-        thermalManager.disable_all_heaters();
+        #if DISABLED(SD_ABORT_NO_COOLDOWN)
+          thermalManager.disable_all_heaters();
+        #endif
        thermalManager.zero_fan_speeds();
        wait_for_heatup = false;
        #if ENABLED(POWER_LOSS_RECOVERY)
@ -1152,6 +1155,7 @@ void loop() {
          enqueue_and_echo_commands_P(PSTR(EVENT_GCODE_SD_STOP));
        #endif
      }
+
    #endif // SDSUPPORT

    if (commands_in_queue < BUFSIZE) get_available_commands();
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@ -976,6 +976,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@ -980,6 +980,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/Ultimate/Configuration_adv.h
+++ b/Ultimate/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/X1/Configuration_adv.h
+++ b/X1/Configuration_adv.h
@ -905,6 +905,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@ -976,6 +976,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@ -976,6 +976,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@ -905,6 +905,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@ -973,6 +973,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@ -985,6 +985,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/Wanhao/Duplicator
+++ b/config/examples/Wanhao/Duplicator
@ -974,6 +974,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  #define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/Geeetech/Rostock
+++ b/config/examples/delta/Geeetech/Rostock
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/Monster/Configuration_adv.h
+++ b/Monster/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@ -970,6 +970,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@ -971,6 +971,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@ -972,6 +972,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@ -973,6 +973,9 @@
  // Enable this option to scroll long filenames in the SD card menu
  //#define SCROLL_LONG_FILENAMES

+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
  /**
   * This option allows you to abort SD printing when any endstop is triggered.
   * This feature must be enabled with "M540 S1" or from the LCD menu.