diff --git a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json index ac558fa44c..9a03f3b159 100644 --- a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json +++ b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json @@ -2,7 +2,7 @@ "build": { "core": "stm32", "cpu": "cortex-m4", - "extra_flags": "-DSTM32F407xx", + "extra_flags": "-DSTM32F4 -DSTM32F407xx -DSTM32F40_41xxx", "f_cpu": "168000000L", "hwids": [ [ @@ -21,28 +21,11 @@ "debug": { "jlink_device": "STM32F407ZG", "openocd_target": "stm32f4x", - "svd_path": "STM32F40x.svd", - "tools": { - "stlink": { - "server": { - "arguments": [ - "-f", - "scripts/interface/stlink.cfg", - "-c", - "transport select hla_swd", - "-f", - "scripts/target/stm32f4x.cfg", - "-c", - "reset_config none" - ], - "executable": "bin/openocd", - "package": "tool-openocd" - } - } - } + "svd_path": "STM32F40x.svd" }, "frameworks": [ "arduino", + "cmsis", "stm32cube" ], "name": "STM32F407ZG (192k RAM. 1024k Flash)", diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h deleted file mode 100644 index 50d59af3bf..0000000000 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,481 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf.h - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ - /** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -#define HAL_CRC_MODULE_ENABLED -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -#define HAL_DAC_MODULE_ENABLED -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_I2C_MODULE_ENABLED -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -#define HAL_RTC_MODULE_ENABLED -/* #define HAL_SAI_MODULE_ENABLED */ -#define HAL_SD_MODULE_ENABLED -#define HAL_SPI_MODULE_ENABLED -#define HAL_TIM_MODULE_ENABLED -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ - /** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#ifndef HSE_VALUE -#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#ifndef HSE_STARTUP_TIMEOUT -#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - - /** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#ifndef HSI_VALUE -#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - - /** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#ifndef LSI_VALUE -#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz -The real value may vary depending on the variations -in voltage and temperature.*/ - /** - * @brief External Low Speed oscillator (LSE) value. - */ -#ifndef LSE_VALUE -#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#ifndef LSE_STARTUP_TIMEOUT -#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - - /** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#ifndef EXTERNAL_CLOCK_VALUE -#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ - /** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ - /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) - -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ - /** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED -#include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED -#include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED -#include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED -#include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED -#include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED -#include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED -#include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED -#include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED -#include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED -#include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED -#include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED -#include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED -#include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED -#include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED -#include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED -#include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED -#include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED -#include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED -#include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED -#include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED -#include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED -#include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED -#include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED -#include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED -#include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED -#include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED -#include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED -#include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED -#include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED -#include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED -#include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED -#include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED -#include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED -#include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED -#include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED -#include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED -#include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED -#include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED -#include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED -#include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED -#include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED -#include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED -#include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED -#include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED -#include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED -#include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED -#include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT - /** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ -#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ -void assert_failed(uint8_t *file, uint32_t line); -#else -#define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp index 9b4be8eea1..1486b21830 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp +++ b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp @@ -28,7 +28,7 @@ ******************************************************************************* */ -#include "variant.h" +#include "pins_arduino.h" #ifdef __cplusplus extern "C" { diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h index 4cc9ae2b85..cf5efb8051 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h +++ b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h @@ -29,11 +29,6 @@ */ #pragma once -/*---------------------------------------------------------------------------- - * Headers - *----------------------------------------------------------------------------*/ -#include - #ifdef __cplusplus extern "C" { #endif // __cplusplus @@ -41,7 +36,6 @@ extern "C" { /*---------------------------------------------------------------------------- * Pins *----------------------------------------------------------------------------*/ -extern const PinName digitalPin[]; #ifdef STM32F405RX #define STM32F4X_PIN_NUM 64 //64 pins mcu, 51 gpio @@ -214,6 +208,10 @@ extern const PinName digitalPin[]; #define PI7 (115+STM32F4X_ADC_NUM) //1:TIM8_CH3 #endif +#ifdef HAL_GPIO_MODULE_ENABLED +#error foo +#endif + // This must be a literal #define NUM_DIGITAL_PINS (STM32F4X_GPIO_NUM) @@ -266,6 +264,9 @@ extern const PinName digitalPin[]; #define PIN_SERIAL_RX PA10 #define PIN_SERIAL_TX PA9 +/* Extra HAL modules */ +#define HAL_PCD_MODULE_ENABLED + #ifdef __cplusplus } // extern "C" #endif diff --git a/platformio.ini b/platformio.ini index a88f113811..d448876e5f 100644 --- a/platformio.ini +++ b/platformio.ini @@ -479,7 +479,7 @@ monitor_speed = 250000 # Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) # [env:BIGTREE_SKR_PRO] -platform = ststm32@5.4.3 +platform = ststm32 framework = arduino board = BigTree_SKR_Pro extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py @@ -495,7 +495,7 @@ monitor_speed = 250000 # BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4) # [env:BIGTREE_BTT002] -platform = ststm32@5.4.3 +platform = ststm32 framework = arduino board = BigTree_Btt002 extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py