Browse Source

Adapt G26 to work for all meshes

pull/1/head
Scott Lahteine 7 years ago
parent
commit
c6b0c104bb
  1. 6
      .travis.yml
  2. 3
      Marlin/src/core/macros.h
  3. 14
      Marlin/src/core/utility.h
  4. 4
      Marlin/src/feature/bedlevel/bedlevel.cpp
  5. 36
      Marlin/src/feature/bedlevel/bedlevel.h
  6. 13
      Marlin/src/feature/bedlevel/ubl/ubl.cpp
  7. 52
      Marlin/src/feature/bedlevel/ubl/ubl.h
  8. 52
      Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
  9. 7
      Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
  10. 945
      Marlin/src/gcode/bedlevel/G26.cpp
  11. 11
      Marlin/src/gcode/bedlevel/G42.cpp
  12. 36
      Marlin/src/gcode/bedlevel/ubl/G26.cpp
  13. 2
      Marlin/src/gcode/bedlevel/ubl/M421.cpp
  14. 12
      Marlin/src/gcode/bedlevel/ubl/M49.cpp
  15. 4
      Marlin/src/gcode/gcode.cpp
  16. 6
      Marlin/src/gcode/gcode.h
  17. 7
      Marlin/src/inc/MarlinConfig.h
  18. 8
      Marlin/src/inc/MarlinConfigPre.h
  19. 18
      Marlin/src/lcd/ultralcd.cpp
  20. 14
      Marlin/src/lcd/ultralcd.h

6
.travis.yml

@ -72,7 +72,7 @@ script:
# Test a probeless build of AUTO_BED_LEVELING_UBL # Test a probeless build of AUTO_BED_LEVELING_UBL
# #
- restore_configs - restore_configs
- opt_enable AUTO_BED_LEVELING_UBL UBL_G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS G3D_PANEL - opt_enable AUTO_BED_LEVELING_UBL G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS G3D_PANEL
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
# #
@ -101,7 +101,7 @@ script:
# Test MESH_BED_LEVELING feature, with LCD # Test MESH_BED_LEVELING feature, with LCD
# #
- restore_configs - restore_configs
- opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER - opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
# #
# Test MINIRAMBO for PWM_MOTOR_CURRENT # Test MINIRAMBO for PWM_MOTOR_CURRENT
@ -115,7 +115,7 @@ script:
# #
- restore_configs - restore_configs
- opt_set MOTHERBOARD BOARD_MINIRAMBO - opt_set MOTHERBOARD BOARD_MINIRAMBO
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER - opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
- opt_enable ULTIMAKERCONTROLLER SDSUPPORT - opt_enable ULTIMAKERCONTROLLER SDSUPPORT
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG

3
Marlin/src/core/macros.h

@ -95,6 +95,9 @@
#define STRINGIFY(M) STRINGIFY_(M) #define STRINGIFY(M) STRINGIFY_(M)
// Macros for bit masks // Macros for bit masks
#ifndef _BV
#define _BV(B) (1UL<<(B))
#endif
#define TEST(n,b) (((n)&_BV(b))!=0) #define TEST(n,b) (((n)&_BV(b))!=0)
#define SBI(n,b) (n |= _BV(b)) #define SBI(n,b) (n |= _BV(b))
#define CBI(n,b) (n &= ~_BV(b)) #define CBI(n,b) (n &= ~_BV(b))

14
Marlin/src/core/utility.h

@ -23,7 +23,7 @@
#ifndef __UTILITY_H__ #ifndef __UTILITY_H__
#define __UTILITY_H__ #define __UTILITY_H__
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfigPre.h"
constexpr char axis_codes[XYZE] = { 'X', 'Y', 'Z', 'E' }; constexpr char axis_codes[XYZE] = { 'X', 'Y', 'Z', 'E' };
@ -33,6 +33,18 @@ void safe_delay(millis_t ms);
void crc16(uint16_t *crc, const void * const data, uint16_t cnt); void crc16(uint16_t *crc, const void * const data, uint16_t cnt);
#endif #endif
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
/**
* These support functions allow the use of large bit arrays of flags that take very
* little RAM. Currently they are limited to being 16x16 in size. Changing the declaration
* to unsigned long will allow us to go to 32x32 if higher resolution Mesh's are needed
* in the future.
*/
FORCE_INLINE void bit_clear(uint16_t bits[16], const uint8_t x, const uint8_t y) { CBI(bits[y], x); }
FORCE_INLINE void bit_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { SBI(bits[y], x); }
FORCE_INLINE bool is_bit_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { return TEST(bits[y], x); }
#endif
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
// Convert uint8_t to string with 123 format // Convert uint8_t to string with 123 format

4
Marlin/src/feature/bedlevel/bedlevel.cpp

@ -41,6 +41,10 @@
#endif #endif
#endif #endif
#if G26_MESH_VALIDATION
bool g26_debug_flag; // = false
#endif
bool leveling_is_valid() { bool leveling_is_valid() {
return return
#if ENABLED(MESH_BED_LEVELING) #if ENABLED(MESH_BED_LEVELING)

36
Marlin/src/feature/bedlevel/bedlevel.h

@ -23,14 +23,17 @@
#ifndef __BEDLEVEL_H__ #ifndef __BEDLEVEL_H__
#define __BEDLEVEL_H__ #define __BEDLEVEL_H__
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfigPre.h"
#if ENABLED(MESH_BED_LEVELING) typedef struct {
#include "mbl/mesh_bed_leveling.h" int8_t x_index, y_index;
#elif ENABLED(AUTO_BED_LEVELING_UBL) float distance; // When populated, the distance from the search location
#include "ubl/ubl.h" } mesh_index_pair;
#elif HAS_ABL
#include "abl/abl.h" #if ENABLED(G26_MESH_VALIDATION)
extern bool g26_debug_flag;
#else
constexpr bool g26_debug_flag = false;
#endif #endif
#if ENABLED(PROBE_MANUALLY) #if ENABLED(PROBE_MANUALLY)
@ -68,4 +71,23 @@ void reset_bed_level();
void out_of_range_error(const char* p_edge); void out_of_range_error(const char* p_edge);
#endif #endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
#define _GET_MESH_X(I) bilinear_start[X_AXIS] + I * bilinear_grid_spacing[X_AXIS]
#define _GET_MESH_Y(J) bilinear_start[Y_AXIS] + J * bilinear_grid_spacing[Y_AXIS]
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#define _GET_MESH_X(I) ubl.mesh_index_to_xpos(I)
#define _GET_MESH_Y(J) ubl.mesh_index_to_ypos(J)
#elif ENABLED(MESH_BED_LEVELING)
#define _GET_MESH_X(I) mbl.index_to_xpos[I]
#define _GET_MESH_Y(J) mbl.index_to_ypos[J]
#endif
#if ENABLED(MESH_BED_LEVELING)
#include "mbl/mesh_bed_leveling.h"
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#include "ubl/ubl.h"
#elif HAS_ABL
#include "abl/abl.h"
#endif
#endif // __BEDLEVEL_H__ #endif // __BEDLEVEL_H__

13
Marlin/src/feature/bedlevel/ubl/ubl.cpp

@ -34,16 +34,6 @@
#include "math.h" #include "math.h"
/**
* These support functions allow the use of large bit arrays of flags that take very
* little RAM. Currently they are limited to being 16x16 in size. Changing the declaration
* to unsigned long will allow us to go to 32x32 if higher resolution Mesh's are needed
* in the future.
*/
void bit_clear(uint16_t bits[16], const uint8_t x, const uint8_t y) { CBI(bits[y], x); }
void bit_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { SBI(bits[y], x); }
bool is_bit_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { return TEST(bits[y], x); }
uint8_t ubl_cnt = 0; uint8_t ubl_cnt = 0;
void unified_bed_leveling::echo_name() { SERIAL_PROTOCOLPGM("Unified Bed Leveling"); } void unified_bed_leveling::echo_name() { SERIAL_PROTOCOLPGM("Unified Bed Leveling"); }
@ -74,9 +64,6 @@
constexpr float unified_bed_leveling::_mesh_index_to_xpos[16], constexpr float unified_bed_leveling::_mesh_index_to_xpos[16],
unified_bed_leveling::_mesh_index_to_ypos[16]; unified_bed_leveling::_mesh_index_to_ypos[16];
bool unified_bed_leveling::g26_debug_flag = false,
unified_bed_leveling::has_control_of_lcd_panel = false;
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
bool unified_bed_leveling::lcd_map_control = false; bool unified_bed_leveling::lcd_map_control = false;
#endif #endif

52
Marlin/src/feature/bedlevel/ubl/ubl.h

@ -23,9 +23,10 @@
#ifndef UNIFIED_BED_LEVELING_H #ifndef UNIFIED_BED_LEVELING_H
#define UNIFIED_BED_LEVELING_H #define UNIFIED_BED_LEVELING_H
#include "../../../Marlin.h" #include "../bedlevel.h"
#include "../../../module/planner.h" #include "../../../module/planner.h"
#include "../../../module/motion.h" #include "../../../module/motion.h"
#include "../../../Marlin.h"
#define UBL_VERSION "1.01" #define UBL_VERSION "1.01"
#define UBL_OK false #define UBL_OK false
@ -34,17 +35,6 @@
#define USE_NOZZLE_AS_REFERENCE 0 #define USE_NOZZLE_AS_REFERENCE 0
#define USE_PROBE_AS_REFERENCE 1 #define USE_PROBE_AS_REFERENCE 1
typedef struct {
int8_t x_index, y_index;
float distance; // When populated, the distance from the search location
} mesh_index_pair;
// ubl.cpp
void bit_clear(uint16_t bits[16], const uint8_t x, const uint8_t y);
void bit_set(uint16_t bits[16], const uint8_t x, const uint8_t y);
bool is_bit_set(uint16_t bits[16], const uint8_t x, const uint8_t y);
// ubl_motion.cpp // ubl_motion.cpp
void debug_current_and_destination(const char * const title); void debug_current_and_destination(const char * const title);
@ -56,7 +46,6 @@ enum MeshPointType { INVALID, REAL, SET_IN_BITMAP };
// External references // External references
char *ftostr43sign(const float&, char); char *ftostr43sign(const float&, char);
bool ubl_lcd_clicked();
extern uint8_t ubl_cnt; extern uint8_t ubl_cnt;
@ -87,22 +76,6 @@ class unified_bed_leveling {
static int g29_grid_size; static int g29_grid_size;
#endif #endif
#if ENABLED(UBL_G26_MESH_VALIDATION)
static float g26_extrusion_multiplier,
g26_retraction_multiplier,
g26_nozzle,
g26_filament_diameter,
g26_prime_length,
g26_x_pos, g26_y_pos,
g26_ooze_amount,
g26_layer_height;
static int16_t g26_bed_temp,
g26_hotend_temp,
g26_repeats;
static int8_t g26_prime_flag;
static bool g26_continue_with_closest, g26_keep_heaters_on;
#endif
static float measure_point_with_encoder(); static float measure_point_with_encoder();
static float measure_business_card_thickness(float); static float measure_business_card_thickness(float);
static bool g29_parameter_parsing(); static bool g29_parameter_parsing();
@ -119,21 +92,6 @@ class unified_bed_leveling {
static bool smart_fill_one(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir); static bool smart_fill_one(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir);
static void smart_fill_mesh(); static void smart_fill_mesh();
#if ENABLED(UBL_G26_MESH_VALIDATION)
static bool exit_from_g26();
static bool parse_G26_parameters();
static void G26_line_to_destination(const float &feed_rate);
static mesh_index_pair find_closest_circle_to_print(const float&, const float&);
static bool look_for_lines_to_connect();
static bool turn_on_heaters();
static bool prime_nozzle();
static void retract_filament(const float where[XYZE]);
static void recover_filament(const float where[XYZE]);
static void print_line_from_here_to_there(const float&, const float&, const float&, const float&, const float&, const float&);
static void move_to(const float&, const float&, const float&, const float&);
inline static void move_to(const float where[XYZE], const float &de) { move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], de); }
#endif
public: public:
static void echo_name(); static void echo_name();
@ -151,10 +109,6 @@ class unified_bed_leveling {
static void G29() _O0; // O0 for no optimization static void G29() _O0; // O0 for no optimization
static void smart_fill_wlsf(const float &) _O2; // O2 gives smaller code than Os on A2560 static void smart_fill_wlsf(const float &) _O2; // O2 gives smaller code than Os on A2560
#if ENABLED(UBL_G26_MESH_VALIDATION)
static void G26();
#endif
static int8_t storage_slot; static int8_t storage_slot;
static float z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; static float z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
@ -183,8 +137,6 @@ class unified_bed_leveling {
MESH_MIN_Y + 14 * (MESH_Y_DIST), MESH_MIN_Y + 15 * (MESH_Y_DIST) MESH_MIN_Y + 14 * (MESH_Y_DIST), MESH_MIN_Y + 15 * (MESH_Y_DIST)
}; };
static bool g26_debug_flag, has_control_of_lcd_panel;
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
static bool lcd_map_control; static bool lcd_map_control;
#endif #endif

52
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@ -677,8 +677,7 @@
lcd_reset_alert_level(); lcd_reset_alert_level();
LCD_MESSAGEPGM(""); LCD_MESSAGEPGM("");
lcd_quick_feedback(); lcd_quick_feedback();
lcd_external_control = false;
has_control_of_lcd_panel = false;
#endif #endif
return; return;
@ -738,7 +737,10 @@
void unified_bed_leveling::probe_entire_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map, const bool stow_probe, bool close_or_far) { void unified_bed_leveling::probe_entire_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map, const bool stow_probe, bool close_or_far) {
mesh_index_pair location; mesh_index_pair location;
has_control_of_lcd_panel = true; #if ENABLED(NEWPANEL)
lcd_external_control = true;
#endif
save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe
DEPLOY_PROBE(); DEPLOY_PROBE();
@ -748,12 +750,12 @@
if (do_ubl_mesh_map) display_map(g29_map_type); if (do_ubl_mesh_map) display_map(g29_map_type);
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
if (ubl_lcd_clicked()) { if (is_lcd_clicked()) {
SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.\n"); SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.\n");
lcd_quick_feedback(); lcd_quick_feedback();
STOW_PROBE(); STOW_PROBE();
while (ubl_lcd_clicked()) idle(); while (is_lcd_clicked()) idle();
has_control_of_lcd_panel = false; lcd_external_control = false;
restore_ubl_active_state_and_leave(); restore_ubl_active_state_and_leave();
safe_delay(50); // Debounce the Encoder wheel safe_delay(50); // Debounce the Encoder wheel
return; return;
@ -894,11 +896,11 @@
float unified_bed_leveling::measure_point_with_encoder() { float unified_bed_leveling::measure_point_with_encoder() {
while (ubl_lcd_clicked()) delay(50); // wait for user to release encoder wheel while (is_lcd_clicked()) delay(50); // wait for user to release encoder wheel
delay(50); // debounce delay(50); // debounce
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
while (!ubl_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here! while (!is_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here!
idle(); idle();
if (encoder_diff) { if (encoder_diff) {
do_blocking_move_to_z(current_position[Z_AXIS] + 0.01 * float(encoder_diff)); do_blocking_move_to_z(current_position[Z_AXIS] + 0.01 * float(encoder_diff));
@ -912,7 +914,7 @@
static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); } static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); }
float unified_bed_leveling::measure_business_card_thickness(const float in_height) { float unified_bed_leveling::measure_business_card_thickness(const float in_height) {
has_control_of_lcd_panel = true; lcd_external_control = true;
save_ubl_active_state_and_disable(); // Disable bed level correction for probing save_ubl_active_state_and_disable(); // Disable bed level correction for probing
do_blocking_move_to(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y)), in_height); do_blocking_move_to(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y)), in_height);
@ -944,7 +946,7 @@
SERIAL_PROTOCOLLNPGM("mm thick."); SERIAL_PROTOCOLLNPGM("mm thick.");
} }
has_control_of_lcd_panel = false; lcd_external_control = false;
restore_ubl_active_state_and_leave(); restore_ubl_active_state_and_leave();
@ -953,7 +955,7 @@
void unified_bed_leveling::manually_probe_remaining_mesh(const float &rx, const float &ry, const float &z_clearance, const float &thick, const bool do_ubl_mesh_map) { void unified_bed_leveling::manually_probe_remaining_mesh(const float &rx, const float &ry, const float &z_clearance, const float &thick, const bool do_ubl_mesh_map) {
has_control_of_lcd_panel = true; lcd_external_control = true;
save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe
@ -978,7 +980,7 @@
do_blocking_move_to_z(z_clearance); do_blocking_move_to_z(z_clearance);
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
has_control_of_lcd_panel = true; lcd_external_control = true;
if (do_ubl_mesh_map) display_map(g29_map_type); // show user where we're probing if (do_ubl_mesh_map) display_map(g29_map_type); // show user where we're probing
@ -987,9 +989,9 @@
const float z_step = 0.01; // existing behavior: 0.01mm per click, occasionally step const float z_step = 0.01; // existing behavior: 0.01mm per click, occasionally step
//const float z_step = 1.0 / planner.axis_steps_per_mm[Z_AXIS]; // approx one step each click //const float z_step = 1.0 / planner.axis_steps_per_mm[Z_AXIS]; // approx one step each click
while (ubl_lcd_clicked()) delay(50); // wait for user to release encoder wheel while (is_lcd_clicked()) delay(50); // wait for user to release encoder wheel
delay(50); // debounce delay(50); // debounce
while (!ubl_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here! while (!is_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here!
idle(); idle();
if (encoder_diff) { if (encoder_diff) {
do_blocking_move_to_z(current_position[Z_AXIS] + float(encoder_diff) * z_step); do_blocking_move_to_z(current_position[Z_AXIS] + float(encoder_diff) * z_step);
@ -997,11 +999,11 @@
} }
} }
// this sequence to detect an ubl_lcd_clicked() debounce it and leave if it is // this sequence to detect an is_lcd_clicked() debounce it and leave if it is
// a Press and Hold is repeated in a lot of places (including G26_Mesh_Validation.cpp). This // a Press and Hold is repeated in a lot of places (including G26_Mesh_Validation.cpp). This
// should be redone and compressed. // should be redone and compressed.
const millis_t nxt = millis() + 1500L; const millis_t nxt = millis() + 1500L;
while (ubl_lcd_clicked()) { // debounce and watch for abort while (is_lcd_clicked()) { // debounce and watch for abort
idle(); idle();
if (ELAPSED(millis(), nxt)) { if (ELAPSED(millis(), nxt)) {
SERIAL_PROTOCOLLNPGM("\nMesh only partially populated."); SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.");
@ -1009,8 +1011,8 @@
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
lcd_quick_feedback(); lcd_quick_feedback();
while (ubl_lcd_clicked()) idle(); while (is_lcd_clicked()) idle();
has_control_of_lcd_panel = false; lcd_external_control = false;
#endif #endif
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
@ -1509,7 +1511,7 @@
new_z = FLOOR(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place new_z = FLOOR(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
has_control_of_lcd_panel = true; lcd_external_control = true;
if (do_ubl_mesh_map) display_map(g29_map_type); // show the user which point is being adjusted if (do_ubl_mesh_map) display_map(g29_map_type); // show the user which point is being adjusted
@ -1523,27 +1525,27 @@
do_blocking_move_to_z(h_offset + new_z); // Move the nozzle as the point is edited do_blocking_move_to_z(h_offset + new_z); // Move the nozzle as the point is edited
#endif #endif
idle(); idle();
} while (!ubl_lcd_clicked()); } while (!is_lcd_clicked());
if (!lcd_map_control) lcd_return_to_status(); if (!lcd_map_control) lcd_return_to_status();
// The technique used here generates a race condition for the encoder click. // The technique used here generates a race condition for the encoder click.
// It could get detected in lcd_mesh_edit (actually _lcd_mesh_fine_tune) or here. // It could get detected in lcd_mesh_edit (actually _lcd_mesh_fine_tune) or here.
// Let's work on specifying a proper API for the LCD ASAP, OK? // Let's work on specifying a proper API for the LCD ASAP, OK?
has_control_of_lcd_panel = true; lcd_external_control = true;
// this sequence to detect an ubl_lcd_clicked() debounce it and leave if it is // this sequence to detect an is_lcd_clicked() debounce it and leave if it is
// a Press and Hold is repeated in a lot of places (including G26_Mesh_Validation.cpp). This // a Press and Hold is repeated in a lot of places (including G26_Mesh_Validation.cpp). This
// should be redone and compressed. // should be redone and compressed.
const millis_t nxt = millis() + 1500UL; const millis_t nxt = millis() + 1500UL;
while (ubl_lcd_clicked()) { // debounce and watch for abort while (is_lcd_clicked()) { // debounce and watch for abort
idle(); idle();
if (ELAPSED(millis(), nxt)) { if (ELAPSED(millis(), nxt)) {
lcd_return_to_status(); lcd_return_to_status();
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
LCD_MESSAGEPGM(MSG_EDITING_STOPPED); LCD_MESSAGEPGM(MSG_EDITING_STOPPED);
while (ubl_lcd_clicked()) idle(); while (is_lcd_clicked()) idle();
goto FINE_TUNE_EXIT; goto FINE_TUNE_EXIT;
} }
@ -1559,7 +1561,7 @@
FINE_TUNE_EXIT: FINE_TUNE_EXIT:
has_control_of_lcd_panel = false; lcd_external_control = false;
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
if (do_ubl_mesh_map) display_map(g29_map_type); if (do_ubl_mesh_map) display_map(g29_map_type);

7
Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp

@ -23,9 +23,7 @@
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
#include "ubl.h" #include "../bedlevel.h"
#include "../../../Marlin.h"
#include "../../../module/planner.h" #include "../../../module/planner.h"
#include "../../../module/stepper.h" #include "../../../module/stepper.h"
#include "../../../module/motion.h" #include "../../../module/motion.h"
@ -34,6 +32,7 @@
#include "../../../module/delta.h" #include "../../../module/delta.h"
#endif #endif
#include "../../../Marlin.h"
#include <math.h> #include <math.h>
extern float destination[XYZE]; extern float destination[XYZE];
@ -55,7 +54,7 @@
// if the title message starts with a '!' it is so important, we are going to // if the title message starts with a '!' it is so important, we are going to
// ignore the status of the g26_debug_flag // ignore the status of the g26_debug_flag
if (*title != '!' && !ubl.g26_debug_flag) return; if (*title != '!' && !g26_debug_flag) return;
const float de = destination[E_AXIS] - current_position[E_AXIS]; const float de = destination[E_AXIS] - current_position[E_AXIS];

945
Marlin/src/gcode/bedlevel/G26.cpp

File diff suppressed because it is too large

11
Marlin/src/gcode/bedlevel/G42.cpp

@ -44,17 +44,6 @@ void GcodeSuite::G42() {
return; return;
} }
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
#define _GET_MESH_X(I) bilinear_start[X_AXIS] + I * bilinear_grid_spacing[X_AXIS]
#define _GET_MESH_Y(J) bilinear_start[Y_AXIS] + J * bilinear_grid_spacing[Y_AXIS]
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#define _GET_MESH_X(I) ubl.mesh_index_to_xpos(I)
#define _GET_MESH_Y(J) ubl.mesh_index_to_ypos(J)
#elif ENABLED(MESH_BED_LEVELING)
#define _GET_MESH_X(I) mbl.index_to_xpos[I]
#define _GET_MESH_Y(J) mbl.index_to_ypos[J]
#endif
set_destination_from_current(); set_destination_from_current();
if (hasI) destination[X_AXIS] = _GET_MESH_X(ix); if (hasI) destination[X_AXIS] = _GET_MESH_X(ix);
if (hasJ) destination[Y_AXIS] = _GET_MESH_Y(iy); if (hasJ) destination[Y_AXIS] = _GET_MESH_Y(iy);

36
Marlin/src/gcode/bedlevel/ubl/G26.cpp

@ -1,36 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* G26.cpp - Unified Bed Leveling
*/
#include "../../../inc/MarlinConfig.h"
#if ENABLED(UBL_G26_MESH_VALIDATION)
#include "../../gcode.h"
#include "../../../feature/bedlevel/ubl/ubl.h"
void GcodeSuite::G26() { ubl.G26(); }
#endif // UBL_G26_MESH_VALIDATION

2
Marlin/src/gcode/bedlevel/ubl/M421.cpp

@ -29,7 +29,7 @@
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
#include "../../gcode.h" #include "../../gcode.h"
#include "../../../feature/bedlevel/ubl/ubl.h" #include "../../../feature/bedlevel/bedlevel.h"
/** /**
* M421: Set a single Mesh Bed Leveling Z coordinate * M421: Set a single Mesh Bed Leveling Z coordinate

12
Marlin/src/gcode/bedlevel/ubl/M49.cpp

@ -21,20 +21,20 @@
*/ */
/** /**
* M49.cpp - Unified Bed Leveling * M49.cpp - Toggle the G26 debug flag
*/ */
#include "../../../inc/MarlinConfig.h" #include "../../../inc/MarlinConfig.h"
#if ENABLED(UBL_G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
#include "../../gcode.h" #include "../../gcode.h"
#include "../../../feature/bedlevel/bedlevel.h" #include "../../../feature/bedlevel/bedlevel.h"
void GcodeSuite::M49() { void GcodeSuite::M49() {
ubl.g26_debug_flag ^= true; g26_debug_flag ^= true;
SERIAL_PROTOCOLPGM("UBL Debug Flag turned "); SERIAL_PROTOCOLPGM("G26 Debug ");
serialprintPGM(ubl.g26_debug_flag ? PSTR("on.") : PSTR("off.")); serialprintPGM(g26_debug_flag ? PSTR("on.") : PSTR("off."));
} }
#endif // UBL_G26_MESH_VALIDATION #endif // G26_MESH_VALIDATION

4
Marlin/src/gcode/gcode.cpp

@ -207,7 +207,7 @@ void GcodeSuite::process_parsed_command() {
break; break;
#endif // INCH_MODE_SUPPORT #endif // INCH_MODE_SUPPORT
#if ENABLED(UBL_G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
case 26: // G26: Mesh Validation Pattern generation case 26: // G26: Mesh Validation Pattern generation
G26(); G26();
break; break;
@ -342,7 +342,7 @@ void GcodeSuite::process_parsed_command() {
case 48: M48(); break; // M48: Z probe repeatability test case 48: M48(); break; // M48: Z probe repeatability test
#endif #endif
#if ENABLED(UBL_G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
case 49: M49(); break; // M49: Turn on or off G26 debug flag for verbose output case 49: M49(); break; // M49: Turn on or off G26 debug flag for verbose output
#endif #endif

6
Marlin/src/gcode/gcode.h

@ -55,7 +55,7 @@
* G19 - Select Plane YZ (Requires CNC_WORKSPACE_PLANES) * G19 - Select Plane YZ (Requires CNC_WORKSPACE_PLANES)
* G20 - Set input units to inches (Requires INCH_MODE_SUPPORT) * G20 - Set input units to inches (Requires INCH_MODE_SUPPORT)
* G21 - Set input units to millimeters (Requires INCH_MODE_SUPPORT) * G21 - Set input units to millimeters (Requires INCH_MODE_SUPPORT)
* G26 - Mesh Validation Pattern (Requires UBL_G26_MESH_VALIDATION) * G26 - Mesh Validation Pattern (Requires G26_MESH_VALIDATION)
* G27 - Park Nozzle (Requires NOZZLE_PARK_FEATURE) * G27 - Park Nozzle (Requires NOZZLE_PARK_FEATURE)
* G28 - Home one or more axes * G28 - Home one or more axes
* G29 - Start or continue the bed leveling probe procedure (Requires bed leveling) * G29 - Start or continue the bed leveling probe procedure (Requires bed leveling)
@ -357,7 +357,7 @@ private:
static void G21(); static void G21();
#endif #endif
#if ENABLED(UBL_G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
static void G26(); static void G26();
#endif #endif
@ -453,7 +453,7 @@ private:
static void M48(); static void M48();
#endif #endif
#if ENABLED(UBL_G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
static void M49(); static void M49();
#endif #endif

7
Marlin/src/inc/MarlinConfig.h

@ -20,8 +20,8 @@
* *
*/ */
#ifndef MARLIN_CONFIG_H #ifndef _MARLIN_CONFIG_H_
#define MARLIN_CONFIG_H #define _MARLIN_CONFIG_H_
#include "MarlinConfigPre.h" #include "MarlinConfigPre.h"
@ -36,8 +36,7 @@
// Include all core headers // Include all core headers
#include "../core/enum.h" #include "../core/enum.h"
#include "../core/language.h" #include "../core/language.h"
#include "../core/types.h"
#include "../core/utility.h" #include "../core/utility.h"
#include "../core/serial.h" #include "../core/serial.h"
#endif // MARLIN_CONFIG_H #endif // _MARLIN_CONFIG_H_

8
Marlin/src/inc/MarlinConfigPre.h

@ -20,8 +20,8 @@
* *
*/ */
#ifndef MARLIN_CONFIGPRE_H #ifndef _MARLIN_CONFIGPRE_H_
#define MARLIN_CONFIGPRE_H #define _MARLIN_CONFIGPRE_H_
#include "../core/boards.h" #include "../core/boards.h"
#include "../core/macros.h" #include "../core/macros.h"
@ -31,4 +31,6 @@
#include "../../Configuration_adv.h" #include "../../Configuration_adv.h"
#include "Conditionals_adv.h" #include "Conditionals_adv.h"
#endif // MARLIN_CONFIGPRE_H #include "../core/types.h"
#endif // _MARLIN_CONFIGPRE_H_

18
Marlin/src/lcd/ultralcd.cpp

@ -60,6 +60,10 @@
#include "../libs/buzzer.h" #include "../libs/buzzer.h"
#endif #endif
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
bool lcd_external_control; // = false
#endif
// Initialized by settings.load() // Initialized by settings.load()
int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
@ -4599,7 +4603,7 @@ void lcd_update() {
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
// Don't run the debouncer if UBL owns the display // Don't run the debouncer if UBL owns the display
#define UBL_CONDITION !ubl.has_control_of_lcd_panel #define UBL_CONDITION !lcd_external_control
#else #else
#define UBL_CONDITION true #define UBL_CONDITION true
#endif #endif
@ -5070,7 +5074,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
case encrot3: ENCODER_SPIN(encrot2, encrot0); break; case encrot3: ENCODER_SPIN(encrot2, encrot0); break;
} }
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
if (ubl.has_control_of_lcd_panel) { if (lcd_external_control) {
ubl.encoder_diff = encoderDiff; // Make the encoder's rotation available to G29's Mesh Editor ubl.encoder_diff = encoderDiff; // Make the encoder's rotation available to G29's Mesh Editor
encoderDiff = 0; // We are going to lie to the LCD Panel and claim the encoder encoderDiff = 0; // We are going to lie to the LCD Panel and claim the encoder
// knob has not turned. // knob has not turned.
@ -5086,14 +5090,14 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
bool lcd_detected() { return true; } bool lcd_detected() { return true; }
#endif #endif
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(G26_MESH_VALIDATION)
void lcd_chirp() {
void chirp_at_user() {
lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
} }
#endif
bool ubl_lcd_clicked() { return LCD_CLICKED; } #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
bool is_lcd_clicked() { return LCD_CLICKED; }
#endif #endif
#endif // ULTIPANEL #endif // ULTIPANEL

14
Marlin/src/lcd/ultralcd.h

@ -29,6 +29,12 @@
#include "../Marlin.h" #include "../Marlin.h"
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
extern bool lcd_external_control;
#else
constexpr bool lcd_external_control = false;
#endif
#define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0) #define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0)
#define BUTTON_PRESSED(BN) !READ(BTN_## BN) #define BUTTON_PRESSED(BN) !READ(BTN_## BN)
@ -123,6 +129,10 @@
void lcd_advanced_pause_show_message(const AdvancedPauseMessage message); void lcd_advanced_pause_show_message(const AdvancedPauseMessage message);
#endif #endif
#if ENABLED(G26_MESH_VALIDATION)
void lcd_chirp();
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
void lcd_mesh_edit_setup(float initial); void lcd_mesh_edit_setup(float initial);
float lcd_mesh_edit(); float lcd_mesh_edit();
@ -208,6 +218,10 @@
#define LCD_CLICKED false #define LCD_CLICKED false
#endif #endif
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
bool is_lcd_clicked();
#endif
#else // no LCD #else // no LCD
inline void lcd_update() {} inline void lcd_update() {}

Loading…
Cancel
Save