Browse Source

Debug Pins Support

pull/1/head
Christopher Pepper 7 years ago
committed by Scott Lahteine
parent
commit
c66d1ac651
  1. 15
      Marlin/Marlin_main.cpp
  2. 12
      Marlin/pinsDebug_list.h
  3. 215
      Marlin/src/HAL/HAL_LPC1768/HAL_pinsDebug.h
  4. 92
      Marlin/src/HAL/HAL_LPC1768/pinsDebug_Re_ARM.h
  5. 2
      Marlin/src/HAL/HAL_pinsDebug.h

15
Marlin/Marlin_main.cpp

@ -6632,7 +6632,7 @@ inline void gcode_M42() {
#if ENABLED(PINS_DEBUGGING) #if ENABLED(PINS_DEBUGGING)
#include "pinsDebug.h" #include "src/HAL/HAL_pinsDebug.h"
inline void toggle_pins() { inline void toggle_pins() {
const bool I_flag = parser.boolval('I'); const bool I_flag = parser.boolval('I');
@ -6643,7 +6643,7 @@ inline void gcode_M42() {
for (uint8_t pin = start; pin <= end; pin++) { for (uint8_t pin = start; pin <= end; pin++) {
//report_pin_state_extended(pin, I_flag, false); //report_pin_state_extended(pin, I_flag, false);
if (!VALID_PIN(pin)) continue;
if (!I_flag && pin_is_protected(pin)) { if (!I_flag && pin_is_protected(pin)) {
report_pin_state_extended(pin, I_flag, true, "Untouched "); report_pin_state_extended(pin, I_flag, true, "Untouched ");
SERIAL_EOL(); SERIAL_EOL();
@ -6869,14 +6869,15 @@ inline void gcode_M42() {
// Watch until click, M108, or reset // Watch until click, M108, or reset
if (parser.boolval('W')) { if (parser.boolval('W')) {
SERIAL_PROTOCOLLNPGM("Watching pins"); SERIAL_PROTOCOLLNPGM("Watching pins");
byte pin_state[last_pin - first_pin + 1]; uint8_t pin_state[last_pin - first_pin + 1];
for (int8_t pin = first_pin; pin <= last_pin; pin++) { for (int8_t pin = first_pin; pin <= last_pin; pin++) {
if (!VALID_PIN(pin)) continue;
if (pin_is_protected(pin) && !ignore_protection) continue; if (pin_is_protected(pin) && !ignore_protection) continue;
pinMode(pin, INPUT_PULLUP); pinMode(pin, INPUT_PULLUP);
delay(1); delay(1);
/* /*
if (IS_ANALOG(pin)) if (IS_ANALOG(pin))
pin_state[pin - first_pin] = analogRead(pin - analogInputToDigitalPin(0)); // int16_t pin_state[...] pin_state[pin - first_pin] = analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)); // int16_t pin_state[...]
else else
//*/ //*/
pin_state[pin - first_pin] = digitalRead(pin); pin_state[pin - first_pin] = digitalRead(pin);
@ -6889,11 +6890,12 @@ inline void gcode_M42() {
for (;;) { for (;;) {
for (int8_t pin = first_pin; pin <= last_pin; pin++) { for (int8_t pin = first_pin; pin <= last_pin; pin++) {
if (!VALID_PIN(pin)) continue;
if (pin_is_protected(pin) && !ignore_protection) continue; if (pin_is_protected(pin) && !ignore_protection) continue;
const byte val = const byte val =
/* /*
IS_ANALOG(pin) IS_ANALOG(pin)
? analogRead(pin - analogInputToDigitalPin(0)) : // int16_t val ? analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)) : // int16_t val
: :
//*/ //*/
digitalRead(pin); digitalRead(pin);
@ -6917,7 +6919,7 @@ inline void gcode_M42() {
// Report current state of selected pin(s) // Report current state of selected pin(s)
for (uint8_t pin = first_pin; pin <= last_pin; pin++) for (uint8_t pin = first_pin; pin <= last_pin; pin++)
report_pin_state_extended(pin, ignore_protection, true); if (VALID_PIN(pin)) report_pin_state_extended(pin, ignore_protection, true);
} }
#endif // PINS_DEBUGGING #endif // PINS_DEBUGGING
@ -11086,6 +11088,7 @@ void process_next_command() {
gcode_M140(); gcode_M140();
break; break;
case 105: // M105: Report current temperature case 105: // M105: Report current temperature
gcode_M105(); gcode_M105();
KEEPALIVE_STATE(NOT_BUSY); KEEPALIVE_STATE(NOT_BUSY);

12
Marlin/pinsDebug_list.h

@ -575,6 +575,9 @@
#if defined(TC2) && TC2 >= 0 && TC2 < NUM_ANALOG_INPUTS #if defined(TC2) && TC2 >= 0 && TC2 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TC2, __LINE__ ) REPORT_NAME_ANALOG(TC2, __LINE__ )
#endif #endif
#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(FILWIDTH_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN < NUM_ANALOG_INPUTS #if PIN_EXISTS(TEMP_0) && TEMP_0_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_0_PIN, __LINE__ ) REPORT_NAME_ANALOG(TEMP_0_PIN, __LINE__ )
#endif #endif
@ -590,6 +593,15 @@
#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN < NUM_ANALOG_INPUTS #if PIN_EXISTS(TEMP_4) && TEMP_4_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_4_PIN, __LINE__ ) REPORT_NAME_ANALOG(TEMP_4_PIN, __LINE__ )
#endif #endif
#if PIN_EXISTS(TEMP_5) && TEMP_5_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_5_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_6) && TEMP_6_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_6_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_7) && TEMP_7_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_7_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS #if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_BED_PIN, __LINE__ ) REPORT_NAME_ANALOG(TEMP_BED_PIN, __LINE__ )
#endif #endif

215
Marlin/src/HAL/HAL_LPC1768/HAL_pinsDebug.h

@ -0,0 +1,215 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
bool endstop_monitor_flag = false;
#define MAX_NAME_LENGTH 35 // one place to specify the format of all the sources of names
// "-" left justify, "35" minimum width of name, pad with blanks
/**
* This routine minimizes RAM usage by creating a FLASH resident array to
* store the pin names, pin numbers and analog/digital flag.
*
* Creating the array in FLASH is a two pass process. The first pass puts the
* name strings into FLASH. The second pass actually creates the array.
*
* Both passes use the same pin list. The list contains two macro names. The
* actual macro definitions are changed depending on which pass is being done.
*
*/
// first pass - put the name strings into FLASH
#define _ADD_PIN_2(PIN_NAME, ENTRY_NAME) static const char ENTRY_NAME[] PROGMEM = { PIN_NAME };
#define _ADD_PIN(PIN_NAME, COUNTER) _ADD_PIN_2(PIN_NAME, entry_NAME_##COUNTER)
#define REPORT_NAME_DIGITAL(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER)
#define REPORT_NAME_ANALOG(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER)
#include "../../../pinsDebug_list.h"
#line 51
/////////////////////////////////////////////////////////////////////////////
// second pass - create the array
#undef _ADD_PIN_2
#undef _ADD_PIN
#undef REPORT_NAME_DIGITAL
#undef REPORT_NAME_ANALOG
#define _ADD_PIN_2(ENTRY_NAME, NAME, IS_DIGITAL) { ENTRY_NAME, NAME, IS_DIGITAL },
#define _ADD_PIN(NAME, COUNTER, IS_DIGITAL) _ADD_PIN_2(entry_NAME_##COUNTER, NAME, IS_DIGITAL)
#define REPORT_NAME_DIGITAL(NAME, COUNTER) _ADD_PIN(NAME, COUNTER, true)
#define REPORT_NAME_ANALOG(NAME, COUNTER) _ADD_PIN(analogInputToDigitalPin(NAME), COUNTER, false)
typedef struct {
const char * const name;
uint8_t pin;
bool is_digital;
} PinInfo;
const PinInfo pin_array[] PROGMEM = {
/**
* [pin name] [pin number] [is digital or analog] 1 = digital, 0 = analog
* Each entry takes up 6 bytes in FLASH:
* 2 byte pointer to location of the name string
* 2 bytes containing the pin number
* analog pin numbers were convereted to digital when the array was created
* 2 bytes containing the digital/analog bool flag
*/
// manually add pins ...
#if SERIAL_PORT == 0
#endif
#include "../../../pinsDebug_list.h"
#line 102
};
#define AVR_ATmega2560_FAMILY_PLUS_70 (MOTHERBOARD == BOARD_BQ_ZUM_MEGA_3D \
|| MOTHERBOARD == BOARD_MIGHTYBOARD_REVE \
|| MOTHERBOARD == BOARD_MINIRAMBO \
|| MOTHERBOARD == BOARD_SCOOVO_X9H)
#include "pinsDebug_Re_ARM.h"
#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM: %4d"), V); SERIAL_ECHO(buffer); }while(0)
#define PWM_CASE(N,Z) \
case TIMER##N##Z: \
if (TCCR##N##A & (_BV(COM##N##Z##1) | _BV(COM##N##Z##0))) { \
PWM_PRINT(OCR##N##Z); \
return true; \
} else return false
bool PWM_ok = true;
static void print_input_or_output(const bool isout) {
serialprintPGM(isout ? PSTR("Output = ") : PSTR("Input = "));
}
// pretty report with PWM info
inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = false, const char *start_string = "") {
uint8_t temp_char;
char *name_mem_pointer, buffer[30]; // for the sprintf statements
bool found = false, multi_name_pin = false;
for (uint8_t x = 0; x < COUNT(pin_array); x++) { // scan entire array and report all instances of this pin
if (GET_ARRAY_PIN(x) == pin) {
GET_PIN_INFO(pin);
if (found) multi_name_pin = true;
found = true;
if (!multi_name_pin) { // report digitial and analog pin number only on the first time through
sprintf_P(buffer, PSTR("%sPIN: %3d "), start_string, pin); // digital pin number
SERIAL_ECHO(buffer);
PRINT_PORT(pin);
if (IS_ANALOG(pin)) {
sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); // analog pin number
SERIAL_ECHO(buffer);
}
else SERIAL_ECHO_SP(8); // add padding if not an analog pin
}
else {
SERIAL_CHAR('.');
SERIAL_ECHO_SP(26 + strlen(start_string)); // add padding if not the first instance found
}
PRINT_ARRAY_NAME(x);
if (extended) {
if (pin_is_protected(pin) && !ignore)
SERIAL_ECHOPGM("protected ");
else {
//SERIAL_PROTOCOLPAIR(" GET_ARRAY_IS_DIGITAL(x) 0 = analog : ", GET_ARRAY_IS_DIGITAL(x));
if (!GET_ARRAY_IS_DIGITAL(x)) {
sprintf_P(buffer, PSTR("Analog in = %5d"), analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)));
SERIAL_ECHO(buffer);
}
else {
//MYSERIAL.printf(" GET_PINMODE(pin) 1 = output : %d ", GET_PINMODE(pin));
if (!GET_PINMODE(pin)) {
//pinMode(pin, INPUT_PULLUP); // make sure input isn't floating - stopped doing this
// because this could interfere with inductive/capacitive
// sensors (high impedance voltage divider) and with PT100 amplifier
print_input_or_output(false);
SERIAL_PROTOCOL(digitalRead_mod(pin));
}
#if PWM_ok
else if (pwm_status(pin)) {
// do nothing
}
#endif
else {
print_input_or_output(true);
SERIAL_PROTOCOL(digitalRead_mod(pin));
}
}
#if PWM_ok
if (!multi_name_pin && extended) pwm_details(pin); // report PWM capabilities only on the first pass & only if doing an extended report
#endif
}
}
SERIAL_EOL();
} // end of IF
} // end of for loop
if (!found) {
GET_PIN_INFO(pin);
sprintf_P(buffer, PSTR("%sPIN: %3d "), start_string, pin);
SERIAL_ECHO(buffer);
PRINT_PORT(pin);
if (IS_ANALOG(pin)) {
sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); // analog pin number
SERIAL_ECHO(buffer);
}
else
SERIAL_ECHO_SP(8); // add padding if not an analog pin
SERIAL_ECHOPGM("<unused/unknown>");
if (extended) {
if (GET_PINMODE(pin)) {
SERIAL_PROTOCOL_SP(MAX_NAME_LENGTH - 16);
print_input_or_output(true);
SERIAL_PROTOCOL(digitalRead_mod(pin));
}
else {
if (IS_ANALOG(pin)) {
sprintf_P(buffer, PSTR(" Analog in = %5d"), analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)));
SERIAL_ECHO(buffer);
SERIAL_ECHOPGM(" ");
}
else
SERIAL_ECHO_SP(MAX_NAME_LENGTH - 16); // add padding if not an analog pin
print_input_or_output(false);
SERIAL_PROTOCOL(digitalRead_mod(pin));
}
//if (!pwm_status(pin)) SERIAL_CHAR(' '); // add padding if it's not a PWM pin
#if PWM_ok
if (extended) pwm_details(pin); // report PWM capabilities only if doing an extended report
#endif
}
SERIAL_EOL();
}
}

92
Marlin/src/HAL/HAL_LPC1768/pinsDebug_Re_ARM.h

@ -0,0 +1,92 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Support routines for Re-ARM board
*/
typedef struct {
int8_t pin;
bool output;
bool analog;
uint8_t resistors;
bool open_drain;
char function_string[15];
} pin_info;
pin_info pin_Re_ARM;
void get_pin_info(int8_t pin) {
pin_Re_ARM.analog = 0;
pin_Re_ARM.pin = pin;
int8_t pin_port = pin_map[pin].port;
int8_t pin_port_pin = pin_map[pin].pin;
// active ADC function/mode/code values for PINSEL registers
int8_t ADC_pin_mode = pin_port == 0 && pin_port_pin == 2 ? 2 :
pin_port == 0 && pin_port_pin == 3 ? 2 :
pin_port == 0 && pin_port_pin == 23 ? 1 :
pin_port == 0 && pin_port_pin == 24 ? 1 :
pin_port == 0 && pin_port_pin == 25 ? 1 :
pin_port == 0 && pin_port_pin == 26 ? 1 :
pin_port == 1 && pin_port_pin == 30 ? 3 :
pin_port == 1 && pin_port_pin == 31 ? 3 : -1;
//get appropriate PINSEL register
volatile uint32_t * pinsel_reg = (pin_port == 0 && pin_port_pin <= 15) ? &LPC_PINCON->PINSEL0 :
(pin_port == 0) ? &LPC_PINCON->PINSEL1 :
(pin_port == 1 && pin_port_pin <= 15) ? &LPC_PINCON->PINSEL2 :
pin_port == 1 ? &LPC_PINCON->PINSEL3 :
pin_port == 2 ? &LPC_PINCON->PINSEL4 :
pin_port == 3 ? &LPC_PINCON->PINSEL7 : &LPC_PINCON->PINSEL9;
uint8_t pinsel_start_bit = pin_port_pin > 15 ? 2 * (pin_port_pin - 16) : 2 * pin_port_pin;
uint8_t pin_mode = (uint8_t) ((*pinsel_reg >> pinsel_start_bit) & 0x3);
uint32_t * FIO_reg[5] PROGMEM = {(uint32_t*) 0x2009C000,(uint32_t*) 0x2009C020,(uint32_t*) 0x2009C040,(uint32_t*) 0x2009C060,(uint32_t*) 0x2009C080};
pin_Re_ARM.output = (*FIO_reg[pin_map[pin].port] >> pin_map[pin].pin) & 1; //input/output state except if active ADC
if (pin_mode) { // if function/mode/code value not 0 then could be an active analog channel
if (ADC_pin_mode == pin_mode) { // found an active analog pin
pin_Re_ARM.output = 0;
pin_Re_ARM.analog = 1;
}
}
}
/**
* translation of routines & variables used by pinsDebug.h
*/
#define GET_PIN_INFO(pin) get_pin_info(pin)
#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
#define GET_PINMODE(pin) pin_Re_ARM.output
#define digitalRead_mod(p) digitalRead(p)
#define digitalPinToPort_DEBUG(p) 0
#define digitalPinToBitMask_DEBUG(pin) 0
#define PRINT_PORT(p) SERIAL_ECHO_SP(10);
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define NAME_FORMAT(p) PSTR("%-##p##s")
// #define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, NAME_FORMAT(MAX_NAME_LENGTH) , pin_array[x].name); SERIAL_ECHO(buffer);} while (0)
#define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, PSTR("%-35s") , pin_array[x].name); SERIAL_ECHO(buffer);} while (0)
#define GET_ARRAY_IS_DIGITAL(x) !pin_Re_ARM.analog

2
Marlin/src/HAL/HAL_pinsDebug.h

@ -28,6 +28,8 @@
#include "HAL_DUE/HAL_pinsDebug_Due.h" #include "HAL_DUE/HAL_pinsDebug_Due.h"
#elif IS_32BIT_TEENSY #elif IS_32BIT_TEENSY
#include "HAL_TEENSY35_36/HAL_pinsDebug_Teensy.h" #include "HAL_TEENSY35_36/HAL_pinsDebug_Teensy.h"
#elif defined(TARGET_LPC1768)
#include "HAL_LPC1768/HAL_pinsDebug.h"
#else #else
#error Unsupported Platform! #error Unsupported Platform!
#endif #endif

Loading…
Cancel
Save