Browse Source

Revert "Revert "Nano2_Config""

This reverts commit bd2cea18a2.
pull/15/head
X-Dron 4 years ago
parent
commit
c6189c155b
  1. 57
      Marlin/Configuration.h
  2. 2
      Marlin/Configuration_adv.h

57
Marlin/Configuration.h

@ -123,13 +123,14 @@
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/
#define BAUDRATE 115200
//#define BAUDRATE 250000
// Enable the Bluetooth serial interface on AT90USB devices
//#define BLUETOOTH
// Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
#endif
// Name displayed in the LCD "Ready" message and Info menu
@ -678,7 +679,7 @@
#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
/**
* Stepper Drivers
@ -696,15 +697,15 @@
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
*/
#define X_DRIVER_TYPE A4988
#define Y_DRIVER_TYPE A4988
#define Z_DRIVER_TYPE A4988
#define X_DRIVER_TYPE TMC2209
#define Y_DRIVER_TYPE TMC2208_STANDALONE
#define Z_DRIVER_TYPE TMC2208_STANDALONE
//#define X2_DRIVER_TYPE A4988
//#define Y2_DRIVER_TYPE A4988
//#define Z2_DRIVER_TYPE A4988
//#define Z3_DRIVER_TYPE A4988
//#define Z4_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE TMC2209
//#define E1_DRIVER_TYPE A4988
//#define E2_DRIVER_TYPE A4988
//#define E3_DRIVER_TYPE A4988
@ -759,7 +760,7 @@
* Override with M92
* X, Y, Z, E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 421 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.5, 80.5, 400, 415 }
/**
* Default Max Feed Rate (mm/s)
@ -779,7 +780,7 @@
* Override with M201
* X, Y, Z, E0 [, E1[, E2...]]
*/
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 800 }
#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 100, 800 }
#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@ -795,7 +796,7 @@
* M204 T Travel Acceleration
*/
// @efim-a-efim - decreased E0 acceleration to make it less noisy (yes, even with TMC2208 drivers)
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_ACCELERATION 1150 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
@ -809,15 +810,15 @@
*/
#define CLASSIC_JERK
#if ENABLED(CLASSIC_JERK)
#define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0
#define DEFAULT_XJERK 20.0
#define DEFAULT_YJERK 20.0
#define DEFAULT_ZJERK 0.5
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
#if ENABLED(LIMITED_JERK_EDITING)
#define MAX_JERK_EDIT_VALUES { 20, 20, 2, 20 } // ...or, set your own edit limits
#define MAX_JERK_EDIT_VALUES { 30, 30, 2, 20 } // ...or, set your own edit limits
#endif
#endif
@ -860,7 +861,7 @@
* The probe replaces the Z-MIN endstop and is used for Z homing.
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
*/
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Force the use of the probe for Z-axis homing
//#define USE_PROBE_FOR_Z_HOMING
@ -881,7 +882,7 @@
* - normally-open switches to 5V and D32.
*
*/
#define Z_MIN_PROBE_PIN BL_TOUCH_Z_PIN // Pin 32 is the RAMPS default
//#define Z_MIN_PROBE_PIN BL_TOUCH_Z_PIN // Pin 32 is the RAMPS default
/**
* Probe Type
@ -1010,10 +1011,10 @@
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 30
#define PROBING_MARGIN 5
// X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_SPEED (1000)
#define XY_PROBE_SPEED 3000
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
@ -1030,7 +1031,7 @@
* A total of 2 does fast/slow probes with a weighted average.
* A total of 3 or more adds more slow probes, taking the average.
*/
#define MULTIPLE_PROBING 5
#define MULTIPLE_PROBING 2
//#define EXTRA_PROBING 1
/**
@ -1049,7 +1050,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 1 // Z Clearance between multiple probes
#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes
#define Z_AFTER_PROBING 5 // Z position after probing is done
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
@ -1157,7 +1158,7 @@
#define Z_HOMING_HEIGHT 2 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
// Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1,1]
@ -1168,7 +1169,7 @@
// @section machine
// The size of the print bed
#define X_BED_SIZE 255
#define X_BED_SIZE 250
#define Y_BED_SIZE 210
// Travel limits (mm) after homing, corresponding to endstop positions.
@ -1434,8 +1435,8 @@
#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT (0) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT (0) // Y point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
#endif
// Homing speeds (mm/m)
@ -1580,9 +1581,9 @@ EEPROM_W25Q
// @section temperature
// Preheat Constants
#define PREHEAT_1_LABEL "ABS"
#define PREHEAT_1_TEMP_HOTEND 250
#define PREHEAT_1_TEMP_BED 100
#define PREHEAT_1_LABEL "PLA"
#define PREHEAT_1_TEMP_HOTEND 190
#define PREHEAT_1_TEMP_BED 50
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_2_LABEL "PETG"
@ -1715,7 +1716,7 @@ EEPROM_W25Q
*
* View the current statistics with M78.
*/
//#define PRINTCOUNTER
#define PRINTCOUNTER
/**
* Password
@ -2279,8 +2280,8 @@ EEPROM_W25Q
//
//#define TFT_320x240
//#define TFT_320x240_SPI
#define TFT_480x320
//#define TFT_480x320_SPI
//#define TFT_480x320
#define TFT_480x320_SPI
//
// Skip autodetect and force specific TFT driver

2
Marlin/Configuration_adv.h

@ -479,7 +479,7 @@
/**
* M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE
#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN LED_CASE_PIN // Override the default pin if needed
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW

Loading…
Cancel
Save