From c613a1ed3807805ea8f2eaec9389e37774262145 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 22 Nov 2017 14:51:42 -0600 Subject: [PATCH] Fix indentation, stepper.h dependency, etc. --- Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.cpp | 279 ++++++++++---------- Marlin/src/gcode/gcode.h | 2 +- Marlin/src/pins/pins_RAMBO.h | 14 +- 3 files changed, 147 insertions(+), 148 deletions(-) diff --git a/Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.cpp b/Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.cpp index 527ba337d8..763275c726 100644 --- a/Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.cpp +++ b/Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.cpp @@ -105,8 +105,6 @@ ring_buffer_r rx_buffer = { { 0 }, 0, 0 }; #if ENABLED(EMERGENCY_PARSER) - #include "../../module/stepper.h" - // Currently looking for: M108, M112, M410 // If you alter the parser please don't forget to update the capabilities in Conditionals_post.h @@ -115,80 +113,80 @@ ring_buffer_r rx_buffer = { { 0 }, 0, 0 }; static e_parser_state state = state_RESET; switch (state) { - case state_RESET: - switch (c) { - case ' ': break; - case 'N': state = state_N; break; - case 'M': state = state_M; break; - default: state = state_IGNORE; - } - break; - - case state_N: - switch (c) { - case '0': case '1': case '2': - case '3': case '4': case '5': - case '6': case '7': case '8': - case '9': case '-': case ' ': break; - case 'M': state = state_M; break; - default: state = state_IGNORE; - } - break; - - case state_M: - switch (c) { - case ' ': break; - case '1': state = state_M1; break; - case '4': state = state_M4; break; - default: state = state_IGNORE; - } - break; + case state_RESET: + switch (c) { + case ' ': break; + case 'N': state = state_N; break; + case 'M': state = state_M; break; + default: state = state_IGNORE; + } + break; + + case state_N: + switch (c) { + case '0': case '1': case '2': + case '3': case '4': case '5': + case '6': case '7': case '8': + case '9': case '-': case ' ': break; + case 'M': state = state_M; break; + default: state = state_IGNORE; + } + break; + + case state_M: + switch (c) { + case ' ': break; + case '1': state = state_M1; break; + case '4': state = state_M4; break; + default: state = state_IGNORE; + } + break; - case state_M1: - switch (c) { - case '0': state = state_M10; break; - case '1': state = state_M11; break; - default: state = state_IGNORE; - } - break; - - case state_M10: - state = (c == '8') ? state_M108 : state_IGNORE; - break; - - case state_M11: - state = (c == '2') ? state_M112 : state_IGNORE; - break; - - case state_M4: - state = (c == '1') ? state_M41 : state_IGNORE; - break; - - case state_M41: - state = (c == '0') ? state_M410 : state_IGNORE; - break; - - case state_IGNORE: - if (c == '\n') state = state_RESET; - break; - - default: - if (c == '\n') { - switch (state) { - case state_M108: - wait_for_user = wait_for_heatup = false; - break; - case state_M112: - kill(PSTR(MSG_KILLED)); - break; - case state_M410: - quickstop_stepper(); - break; - default: - break; + case state_M1: + switch (c) { + case '0': state = state_M10; break; + case '1': state = state_M11; break; + default: state = state_IGNORE; + } + break; + + case state_M10: + state = (c == '8') ? state_M108 : state_IGNORE; + break; + + case state_M11: + state = (c == '2') ? state_M112 : state_IGNORE; + break; + + case state_M4: + state = (c == '1') ? state_M41 : state_IGNORE; + break; + + case state_M41: + state = (c == '0') ? state_M410 : state_IGNORE; + break; + + case state_IGNORE: + if (c == '\n') state = state_RESET; + break; + + default: + if (c == '\n') { + switch (state) { + case state_M108: + wait_for_user = wait_for_heatup = false; + break; + case state_M112: + kill(PSTR(MSG_KILLED)); + break; + case state_M410: + quickstop_stepper(); + break; + default: + break; + } + state = state_RESET; } - state = state_RESET; - } } } @@ -213,61 +211,61 @@ FORCE_INLINE void store_rxd_char() { else if (!++rx_dropped_bytes) ++rx_dropped_bytes; #endif -#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) - // calculate count of bytes stored into the RX buffer - ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); - // Keep track of the maximum count of enqueued bytes - NOLESS(rx_max_enqueued, rx_count); -#endif + #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) + // calculate count of bytes stored into the RX buffer + ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + // Keep track of the maximum count of enqueued bytes + NOLESS(rx_max_enqueued, rx_count); + #endif -#if ENABLED(SERIAL_XON_XOFF) + #if ENABLED(SERIAL_XON_XOFF) - // for high speed transfers, we can use XON/XOFF protocol to do - // software handshake and avoid overruns. - if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) { + // for high speed transfers, we can use XON/XOFF protocol to do + // software handshake and avoid overruns. + if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) { - // calculate count of bytes stored into the RX buffer - ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + // calculate count of bytes stored into the RX buffer + ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); - // if we are above 12.5% of RX buffer capacity, send XOFF before - // we run out of RX buffer space .. We need 325 bytes @ 250kbits/s to - // let the host react and stop sending bytes. This translates to 13mS - // propagation time. - if (rx_count >= (RX_BUFFER_SIZE) / 8) { - // If TX interrupts are disabled and data register is empty, - // just write the byte to the data register and be done. This - // shortcut helps significantly improve the effective datarate - // at high (>500kbit/s) bitrates, where interrupt overhead - // becomes a slowdown. - if (!(HWUART->UART_IMR & UART_IMR_TXRDY) && (HWUART->UART_SR & UART_SR_TXRDY)) { - // Send an XOFF character - HWUART->UART_THR = XOFF_CHAR; - - // And remember it was sent - xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT; - } - else { - // TX interrupts disabled, but buffer still not empty ... or - // TX interrupts enabled. Reenable TX ints and schedule XOFF - // character to be sent - #if TX_BUFFER_SIZE > 0 - HWUART->UART_IER = UART_IER_TXRDY; - xon_xoff_state = XOFF_CHAR; - #else - // We are not using TX interrupts, we will have to send this manually - while (!(HWUART->UART_SR & UART_SR_TXRDY)) { sw_barrier(); }; + // if we are above 12.5% of RX buffer capacity, send XOFF before + // we run out of RX buffer space .. We need 325 bytes @ 250kbits/s to + // let the host react and stop sending bytes. This translates to 13mS + // propagation time. + if (rx_count >= (RX_BUFFER_SIZE) / 8) { + // If TX interrupts are disabled and data register is empty, + // just write the byte to the data register and be done. This + // shortcut helps significantly improve the effective datarate + // at high (>500kbit/s) bitrates, where interrupt overhead + // becomes a slowdown. + if (!(HWUART->UART_IMR & UART_IMR_TXRDY) && (HWUART->UART_SR & UART_SR_TXRDY)) { + // Send an XOFF character HWUART->UART_THR = XOFF_CHAR; - // And remember we already sent it + + // And remember it was sent xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT; - #endif + } + else { + // TX interrupts disabled, but buffer still not empty ... or + // TX interrupts enabled. Reenable TX ints and schedule XOFF + // character to be sent + #if TX_BUFFER_SIZE > 0 + HWUART->UART_IER = UART_IER_TXRDY; + xon_xoff_state = XOFF_CHAR; + #else + // We are not using TX interrupts, we will have to send this manually + while (!(HWUART->UART_SR & UART_SR_TXRDY)) { sw_barrier(); }; + HWUART->UART_THR = XOFF_CHAR; + // And remember we already sent it + xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT; + #endif + } } } - } -#endif // SERIAL_XON_XOFF + #endif // SERIAL_XON_XOFF -#if ENABLED(EMERGENCY_PARSER) - emergency_parser(c); -#endif + #if ENABLED(EMERGENCY_PARSER) + emergency_parser(c); + #endif } #if TX_BUFFER_SIZE > 0 @@ -296,7 +294,7 @@ FORCE_INLINE void store_rxd_char() { HWUART->UART_IDR = UART_IDR_TXRDY; } -#endif // TX_BUFFER_SIZE +#endif // TX_BUFFER_SIZE > 0 static void UART_ISR(void) { uint32_t status = HWUART->UART_SR; @@ -393,20 +391,20 @@ int MarlinSerial::read(void) { v = rx_buffer.buffer[t]; rx_buffer.tail = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1); - #if ENABLED(SERIAL_XON_XOFF) - if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) { - // Get count of bytes in the RX buffer - ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); - // When below 10% of RX buffer capacity, send XON before - // running out of RX buffer bytes - if (rx_count < (RX_BUFFER_SIZE) / 10) { - xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT; - CRITICAL_SECTION_END; // End critical section before returning! - writeNoHandshake(XON_CHAR); - return v; + #if ENABLED(SERIAL_XON_XOFF) + if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) { + // Get count of bytes in the RX buffer + ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + // When below 10% of RX buffer capacity, send XON before + // running out of RX buffer bytes + if (rx_count < (RX_BUFFER_SIZE) / 10) { + xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT; + CRITICAL_SECTION_END; // End critical section before returning! + writeNoHandshake(XON_CHAR); + return v; + } } - } - #endif + #endif } CRITICAL_SECTION_END; return v; @@ -427,15 +425,16 @@ void MarlinSerial::flush(void) { rx_buffer.head = rx_buffer.tail; CRITICAL_SECTION_END; -#if ENABLED(SERIAL_XON_XOFF) - if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) { - xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT; - writeNoHandshake(XON_CHAR); - } -#endif + #if ENABLED(SERIAL_XON_XOFF) + if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) { + xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT; + writeNoHandshake(XON_CHAR); + } + #endif } #if TX_BUFFER_SIZE > 0 + uint8_t MarlinSerial::availableForWrite(void) { CRITICAL_SECTION_START; const uint8_t h = tx_buffer.head, t = tx_buffer.tail; diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index 201c8e973d..24d0d3f078 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -64,7 +64,7 @@ * G32 - Undock sled (Z_PROBE_SLED only) * G33 - Delta Auto-Calibration (Requires DELTA_AUTO_CALIBRATION) * G38 - Probe in any direction using the Z_MIN_PROBE (Requires G38_PROBE_TARGET) - * G42 - Coordinated move to a mesh point (Requires HAS_MESH) + * G42 - Coordinated move to a mesh point (Requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BLINEAR, or AUTO_BED_LEVELING_UBL) * G90 - Use Absolute Coordinates * G91 - Use Relative Coordinates * G92 - Set current position to coordinates given diff --git a/Marlin/src/pins/pins_RAMBO.h b/Marlin/src/pins/pins_RAMBO.h index c6ef675bcc..2b8a823d4d 100644 --- a/Marlin/src/pins/pins_RAMBO.h +++ b/Marlin/src/pins/pins_RAMBO.h @@ -54,13 +54,6 @@ #define SERVO2_PIN 24 // Motor header MX3 #define SERVO3_PIN 5 // PWM header pin 5 -// -// Z Probe (when not Z_MIN_PIN) -// -#ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 30 -#endif - // // Limit Switches // @@ -71,6 +64,13 @@ #define Z_MIN_PIN 10 #define Z_MAX_PIN 30 +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 30 +#endif + // // Steppers //