diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
index 438a2b25dc..b6b9486bee 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -750,7 +750,7 @@
           const float rawx = mesh_index_to_xpos(location.x_index),
                       rawy = mesh_index_to_ypos(location.y_index);
 
-          const float measured_z = probe_pt(rawx, rawy, stow_probe, g29_verbose_level); // TODO: Needs error handling
+          const float measured_z = probe_pt(rawx, rawy, stow_probe ? PROBE_PT_STOW : PROBE_PT_RAISE, g29_verbose_level); // TODO: Needs error handling
           z_values[location.x_index][location.y_index] = measured_z;
         }
         SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
@@ -1519,7 +1519,7 @@
       incremental_LSF_reset(&lsf_results);
 
       if (do_3_pt_leveling) {
-        measured_z = probe_pt(PROBE_PT_1_X, PROBE_PT_1_Y, false, g29_verbose_level);
+        measured_z = probe_pt(PROBE_PT_1_X, PROBE_PT_1_Y, PROBE_PT_RAISE, g29_verbose_level);
         if (isnan(measured_z))
           abort_flag = true;
         else {
@@ -1533,7 +1533,7 @@
         }
 
         if (!abort_flag) {
-          measured_z = probe_pt(PROBE_PT_2_X, PROBE_PT_2_Y, false, g29_verbose_level);
+          measured_z = probe_pt(PROBE_PT_2_X, PROBE_PT_2_Y, PROBE_PT_RAISE, g29_verbose_level);
           //z2 = measured_z;
           if (isnan(measured_z))
             abort_flag = true;
@@ -1548,7 +1548,7 @@
         }
 
         if (!abort_flag) {
-          measured_z = probe_pt(PROBE_PT_3_X, PROBE_PT_3_Y, true, g29_verbose_level);
+          measured_z = probe_pt(PROBE_PT_3_X, PROBE_PT_3_Y, PROBE_PT_STOW, g29_verbose_level);
           //z3 = measured_z;
           if (isnan(measured_z))
             abort_flag = true;
@@ -1576,7 +1576,7 @@
             const float ry = float(y_min) + dy * (zig_zag ? g29_grid_size - 1 - iy : iy);
 
             if (!abort_flag) {
-              measured_z = probe_pt(rx, ry, parser.seen('E'), g29_verbose_level); // TODO: Needs error handling
+              measured_z = probe_pt(rx, ry, parser.seen('E') ? PROBE_PT_STOW : PROBE_PT_RAISE, g29_verbose_level); // TODO: Needs error handling
 
               abort_flag = isnan(measured_z);
 
diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp
index 3d8a88c6bc..33afac494f 100644
--- a/Marlin/src/gcode/bedlevel/abl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@@ -604,7 +604,7 @@ void GcodeSuite::G29() {
 
   #else // !PROBE_MANUALLY
   {
-    const bool stow_probe_after_each = parser.boolval('E');
+    const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_RAISE;
 
     measured_z = 0;
 
@@ -650,7 +650,7 @@ void GcodeSuite::G29() {
             if (!position_is_reachable_by_probe(xProbe, yProbe)) continue;
           #endif
 
-          measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
+          measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, raise_after, verbose_level);
 
           if (isnan(measured_z)) {
             set_bed_leveling_enabled(abl_should_enable);
@@ -687,7 +687,7 @@ void GcodeSuite::G29() {
         // Retain the last probe position
         xProbe = points[i].x;
         yProbe = points[i].y;
-        measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
+        measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, raise_after, verbose_level);
         if (isnan(measured_z)) {
           set_bed_leveling_enabled(abl_should_enable);
           break;
diff --git a/Marlin/src/gcode/calibrate/G33.cpp b/Marlin/src/gcode/calibrate/G33.cpp
index 626ba24c5a..036b3425f3 100644
--- a/Marlin/src/gcode/calibrate/G33.cpp
+++ b/Marlin/src/gcode/calibrate/G33.cpp
@@ -137,7 +137,7 @@ static void G33_cleanup(
 
 inline float calibration_probe(const float nx, const float ny, const bool stow) {
   #if HAS_BED_PROBE
-    return probe_pt(nx, ny, stow, 0, false);
+    return probe_pt(nx, ny, stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, false);
   #else
     UNUSED(stow);
     return lcd_probe_pt(nx, ny);
diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp
index cc82a7fe33..14efec5e00 100644
--- a/Marlin/src/gcode/calibrate/M48.cpp
+++ b/Marlin/src/gcode/calibrate/M48.cpp
@@ -70,7 +70,7 @@ void GcodeSuite::M48() {
     return;
   }
 
-  const bool stow_probe_after_each = parser.boolval('E');
+  const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_RAISE;
 
   float X_current = current_position[X_AXIS],
         Y_current = current_position[Y_AXIS];
@@ -114,7 +114,7 @@ void GcodeSuite::M48() {
   double mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples];
 
   // Move to the first point, deploy, and probe
-  const float t = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, verbose_level);
+  const float t = probe_pt(X_probe_location, Y_probe_location, raise_after, verbose_level);
   bool probing_good = !isnan(t);
 
   if (probing_good) {
@@ -190,7 +190,7 @@ void GcodeSuite::M48() {
       } // n_legs
 
       // Probe a single point
-      sample_set[n] = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, 0);
+      sample_set[n] = probe_pt(X_probe_location, Y_probe_location, raise_after, 0);
 
       // Break the loop if the probe fails
       probing_good = !isnan(sample_set[n]);
diff --git a/Marlin/src/gcode/probe/G30.cpp b/Marlin/src/gcode/probe/G30.cpp
index 429e62648e..ee668a83af 100644
--- a/Marlin/src/gcode/probe/G30.cpp
+++ b/Marlin/src/gcode/probe/G30.cpp
@@ -51,8 +51,8 @@ void GcodeSuite::G30() {
 
   setup_for_endstop_or_probe_move();
 
-  const bool do_stow = parser.boolval('E');
-  const float measured_z = probe_pt(xpos, ypos, do_stow, 1);
+  const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_NONE;
+  const float measured_z = probe_pt(xpos, ypos, raise_after, 1);
 
   if (!isnan(measured_z)) {
     SERIAL_PROTOCOLPAIR("Bed X: ", FIXFLOAT(xpos));
@@ -62,7 +62,7 @@ void GcodeSuite::G30() {
 
   clean_up_after_endstop_or_probe_move();
 
-  if (do_stow) move_z_after_probing();
+  if (raise_after == PROBE_PT_STOW) move_z_after_probing();
 
   report_current_position();
 }
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index 7ed4d0e6af..0f3defbb22 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -631,13 +631,15 @@ static float run_z_probe() {
  *   - Raise to the BETWEEN height
  * - Return the probed Z position
  */
-float probe_pt(const float &rx, const float &ry, const bool stow, const uint8_t verbose_level, const bool probe_relative/*=true*/) {
+float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/) {
   #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) {
       SERIAL_ECHOPAIR(">>> probe_pt(", LOGICAL_X_POSITION(rx));
       SERIAL_ECHOPAIR(", ", LOGICAL_Y_POSITION(ry));
-      SERIAL_ECHOPAIR(", ", stow ? "" : "no ");
-      SERIAL_ECHOLNPGM("stow)");
+      SERIAL_ECHOPAIR(", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none");
+      SERIAL_ECHOPAIR(", ", int(verbose_level));
+      SERIAL_ECHOPAIR(", ", probe_relative ? "probe" : "nozzle");
+      SERIAL_ECHOLNPGM("_relative)");
       DEBUG_POS("", current_position);
     }
   #endif
@@ -670,9 +672,9 @@ float probe_pt(const float &rx, const float &ry, const bool stow, const uint8_t
   if (!DEPLOY_PROBE()) {
     measured_z = run_z_probe() + zprobe_zoffset;
 
-    if (!stow)
+    if (raise_after == PROBE_PT_RAISE)
       do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
-    else
+    else if (raise_after == PROBE_PT_STOW)
       if (STOW_PROBE()) measured_z = NAN;
   }
 
diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h
index a90020fe77..919602e985 100644
--- a/Marlin/src/module/probe.h
+++ b/Marlin/src/module/probe.h
@@ -37,7 +37,12 @@
   #else
     inline void move_z_after_probing() {}
   #endif
-  float probe_pt(const float &rx, const float &ry, const bool, const uint8_t, const bool probe_relative=true);
+  enum ProbePtRaise : unsigned char {
+    PROBE_PT_NONE,  // No raise or stow after run_z_probe
+    PROBE_PT_STOW,  // Do a complete stow after run_z_probe
+    PROBE_PT_RAISE  // Raise to "between" clearance after run_z_probe
+  };
+  float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true);
   #define DEPLOY_PROBE() set_probe_deployed(true)
   #define STOW_PROBE() set_probe_deployed(false)
 #else