andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge pull request #6680 from bgort/g26repeat 

G26:  Add 'Repeat' Option
pull/1/head
bgort 8 years ago
committed by GitHub
parent
7325035aac f7a201b0d0
commit
c33d99c5b2
1 changed files with 52 additions and 36 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 88
      Marlin/G26_Mesh_Validation_Tool.cpp

88
Marlin/G26_Mesh_Validation_Tool.cpp
View File

@ -66,54 +66,58 @@
* the user can specify the X and Y position of interest with command parameters. This allows the user to * the user can specify the X and Y position of interest with command parameters. This allows the user to
* focus on a particular area of the Mesh where attention is needed. * focus on a particular area of the Mesh where attention is needed.
* *
* B # Bed Set the Bed Temperature. If not specified, a default of 60 C. will be assumed. * B # Bed Set the Bed Temperature. If not specified, a default of 60 C. will be assumed.
* *
* C Current When searching for Mesh Intersection points to draw, use the current nozzle location * C Current When searching for Mesh Intersection points to draw, use the current nozzle location
* as the base for any distance comparison. as the base for any distance comparison.
* *
* D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this * D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this
* command to see how well a Mesh as been adjusted to match a print surface. In order to do * command to see how well a Mesh as been adjusted to match a print surface. In order to do
* this the Unified Bed Leveling System is turned on by the G26 command. The D parameter * this the Unified Bed Leveling System is turned on by the G26 command. The D parameter
* alters the command's normal behaviour and disables the Unified Bed Leveling System even if * alters the command's normal behaviour and disables the Unified Bed Leveling System even if
* it is on. * it is on.
* *
* H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed. * H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed.
* *
* F # Filament Used to specify the diameter of the filament being used. If not specified * F # Filament Used to specify the diameter of the filament being used. If not specified
* 1.75mm filament is assumed. If you are not getting acceptable results by using the * 1.75mm filament is assumed. If you are not getting acceptable results by using the
* 'correct' numbers, you can scale this number up or down a little bit to change the amount * 'correct' numbers, you can scale this number up or down a little bit to change the amount
* of filament that is being extruded during the printing of the various lines on the bed. * of filament that is being extruded during the printing of the various lines on the bed.
* *
* K Keep-On Keep the heaters turned on at the end of the command. * K Keep-On Keep the heaters turned on at the end of the command.
* *
* L # Layer Layer height. (Height of nozzle above bed) If not specified .20mm will be used. * L # Layer Layer height. (Height of nozzle above bed) If not specified .20mm will be used.
* *
* Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and * Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and
* un-retraction is at 1.2mm These numbers will be scaled by the specified amount * un-retraction is at 1.2mm These numbers will be scaled by the specified amount
* *
* N # Nozzle Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed. * M # Random Randomize the order that the circles are drawn on the bed. The search for the closest
* 'n' can be used instead if your host program does not appreciate you using 'N'. * undrawn cicle is still done. But the distance to the location for each circle has a
* random number of the size specified added to it. Specifying R50 will give an interesting
* deviation from the normal behaviour on a 10 x 10 Mesh.
* N # Nozzle Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed.
* 'n' can be used instead if your host program does not appreciate you using 'N'.
* *
* O # Ooooze How much your nozzle will Ooooze filament while getting in position to print. This * O # Ooooze How much your nozzle will Ooooze filament while getting in position to print. This
* is over kill, but using this parameter will let you get the very first 'cicle' perfect * is over kill, but using this parameter will let you get the very first 'cicle' perfect
* so you have a trophy to peel off of the bed and hang up to show how perfectly you have your * so you have a trophy to peel off of the bed and hang up to show how perfectly you have your
* Mesh calibrated. If not specified, a filament length of .3mm is assumed. * Mesh calibrated. If not specified, a filament length of .3mm is assumed.
* *
* P # Prime Prime the nozzle with specified length of filament. If this parameter is not * P # Prime Prime the nozzle with specified length of filament. If this parameter is not
* given, no prime action will take place. If the parameter specifies an amount, that much * given, no prime action will take place. If the parameter specifies an amount, that much
* will be purged before continuing. If no amount is specified the command will start * will be purged before continuing. If no amount is specified the command will start
* purging filament until the user provides an LCD Click and then it will continue with * purging filament until the user provides an LCD Click and then it will continue with
* printing the Mesh. You can carefully remove the spent filament with a needle nose * printing the Mesh. You can carefully remove the spent filament with a needle nose
* pliers while holding the LCD Click wheel in a depressed state. * pliers while holding the LCD Click wheel in a depressed state.
* *
* R # Random Randomize the order that the circles are drawn on the bed. The search for the closest * R # Repeat Prints the number of patterns given as a parameter, starting at the current location.
* undrawn cicle is still done. But the distance to the location for each circle has a * If a parameter isn't given, every point will be printed unless G26 is interrupted.
* random number of the size specified added to it. Specifying R50 will give an interesting * This works the same way that the UBL G29 P4 R parameter works.
* deviation from the normal behaviour on a 10 x 10 Mesh.
* *
* X # X coordinate Specify the starting location of the drawing activity. * X # X Coord. Specify the starting location of the drawing activity.
* *
* Y # Y coordinate Specify the starting location of the drawing activity. * Y # Y Coord. Specify the starting location of the drawing activity.
*/ */
// External references // External references
@ -176,6 +180,8 @@
static bool keep_heaters_on = false; static bool keep_heaters_on = false;
static int16_t g26_repeats;
/** /**
* G26: Mesh Validation Pattern generation. * G26: Mesh Validation Pattern generation.
* *
@ -359,7 +365,7 @@
//debug_current_and_destination(PSTR("Done with current circle.")); //debug_current_and_destination(PSTR("Done with current circle."));
} while (location.x_index >= 0 && location.y_index >= 0); } while (location.x_index >= 0 && location.y_index >= 0 && g26_repeats--);
LEAVE: LEAVE:
lcd_reset_alert_level(); lcd_reset_alert_level();
@ -722,11 +728,21 @@
} }
} }
if (code_seen('R')) { if (code_seen('M')) {
randomSeed(millis()); randomSeed(millis());
random_deviation = code_has_value() ? code_value_float() : 50.0; random_deviation = code_has_value() ? code_value_float() : 50.0;
} }
if (code_seen('R')) {
g26_repeats = code_has_value() ? code_value_int() - 1 : 999;
if (g26_repeats <= 0) {
SERIAL_PROTOCOLLNPGM("?(R)epeat value not plausible; must be greater than 0.");
return UBL_ERR;
}
}
x_pos = current_position[X_AXIS]; x_pos = current_position[X_AXIS];
y_pos = current_position[Y_AXIS]; y_pos = current_position[Y_AXIS];

Write Preview
Loading…
Cancel
Save