Fix AZSMZ MINI pins for new LPC1768 pinmapping

Marlin/src/pins/pins_AZSMZ_MINI.h

@@ -24,9 +24,8 @@
  * AZSMZ MINI pin assignments
  */
 
-//#if !defined(TARGET_LPC1768)
+#ifndef TARGET_LPC1768
-#if DISABLED(IS_REARM)
+  #error "Oops!  Make sure you have LPC1768 selected."
-  #error "Oops!  Make sure you have Re-Arm selected."
 #endif
 
 #ifndef BOARD_NAME
@@ -38,38 +37,38 @@
 //
 // Servos
 //
-#define SERVO0_PIN         53
+#define SERVO0_PIN         P1_23
 
 //
 // Limit Switches
 //
-#define X_MIN_PIN           3
+#define X_MIN_PIN          P1_24
-#define Y_MIN_PIN          14
+#define Y_MIN_PIN          P1_26
-#define Z_MIN_PIN          18
+#define Z_MIN_PIN          P1_28
-#define Z_MAX_PIN          19
+#define Z_MAX_PIN          P1_29
 
 //
 // Steppers
 //
-#define X_STEP_PIN         26
+#define X_STEP_PIN         P2_0
-#define X_DIR_PIN          28
+#define X_DIR_PIN          P0_5
-#define X_ENABLE_PIN       24
+#define X_ENABLE_PIN       P0_4
 
-#define Y_STEP_PIN         54
+#define Y_STEP_PIN         P2_1
-#define Y_DIR_PIN          55
+#define Y_DIR_PIN          P0_11
-#define Y_ENABLE_PIN       38
+#define Y_ENABLE_PIN       P0_10
 
-#define Z_STEP_PIN         60
+#define Z_STEP_PIN         P2_2
-#define Z_DIR_PIN          61
+#define Z_DIR_PIN          P0_20
-#define Z_ENABLE_PIN       56
+#define Z_ENABLE_PIN       P0_19
 
-#define E0_STEP_PIN        46
+#define E0_STEP_PIN        P2_3
-#define E0_DIR_PIN         48
+#define E0_DIR_PIN         P0_22
-#define E0_ENABLE_PIN      62
+#define E0_ENABLE_PIN      P0_21
 
-#define E1_STEP_PIN        36
+#define E1_STEP_PIN        P2_8
-#define E1_DIR_PIN         34
+#define E1_DIR_PIN         P2_13
-#define E1_ENABLE_PIN      30
+#define E1_ENABLE_PIN      P4_29
 
 //
 // Temperature Sensors
@@ -83,35 +82,35 @@
 // Heaters / Fans
 //
 // EFB
-#define HEATER_0_PIN        8
+#define HEATER_0_PIN       P2_4
-#define HEATER_BED_PIN     10
+#define HEATER_BED_PIN     P2_5
-#define FAN_PIN             9
+#define FAN_PIN            P2_7
-#define FAN1_PIN           63
+#define FAN1_PIN           P0_26
 
 #if ENABLED(AZSMZ_12864)
-  #define BEEPER_PIN       37
+  #define BEEPER_PIN       P1_30
-  #define DOGLCD_A0        59
+  #define DOGLCD_A0        P2_6
-  #define DOGLCD_CS        41
+  #define DOGLCD_CS        P1_22
-  #define BTN_EN1          13
+  #define BTN_EN1          P4_28
-  #define BTN_EN2          15
+  #define BTN_EN2          P1_27
-  #define BTN_ENC          31
+  #define BTN_ENC          P3_26
-  #define LCD_SDSS         16
+  #define LCD_SDSS         P0_16
-  #define SD_DETECT_PIN    33
+  #define SD_DETECT_PIN    P3_25
 #endif
 
 //
 // Ethernet pins
 //
-#define ENET_MDIO          71
+#define ENET_MDIO          P1_17
-#define ENET_RX_ER         73
+#define ENET_RX_ER         P1_14
-#define ENET_RXD1          75
+#define ENET_RXD1          P1_10
-#define ENET_MOC           70
+#define ENET_MOC           P1_16
-#define REF_CLK            72
+#define REF_CLK            P1_15
-#define ENET_RXD0          74
+#define ENET_RXD0          P1_9
-#define ENET_CRS           76
+#define ENET_CRS           P1_8
-#define ENET_TX_EN         77
+#define ENET_TX_EN         P1_4
-#define ENET_TXD0          78
+#define ENET_TXD0          P1_0
-#define ENET_TXD1          79
+#define ENET_TXD1          P1_1
 
 /**
  *  PWMs